arm May 2017

arm@lists.fedoraproject.org

13 participants
21 discussions

Re: Installing additional packages before boot
by Alessio Ciregia 06 Jul '17

06 Jul '17

2017-05-09 0:46 GMT+02:00 Peter Robinson <pbrobinson(a)gmail.com>: > > What disk image are you using? I believe all the images, definitely the > minimal, as I use it regularly, have the required plugins and you can use > the client to configure it. > > Details: > https://nullr0ute.com/2016/09/connect-to-a-wireless-network- > using-command-line-nmcli/ > Thanks for your reply. So, maybe it is the Fedora-Server-armhfp-26 image that doesn't include NetworkManager-wifi plugin, that lead me to "Error: No Wi-Fi device found." issuing the "nmcli device wifi rescan" command. In fact: [root@localhost ~]# rpm -qa |grep Network NetworkManager-1.8.0-0.2.rc2.fc26.armv7hl NetworkManager-team-1.8.0-0.2.rc2.fc26.armv7hl NetworkManager-libnm-1.8.0-0.2.rc2.fc26.armv7hl Even if [root@localhost ~]# iwconfig ... wlan0 IEEE 802.11 ESSID:off/any Mode:Managed Access Point: Not-Associated Retry short limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on I will try minimal image. Anyway my question is still valid. Is it a simple task to add packages before inserting the SD card in the raspberry? Or it requires a lot of work and skills I don't have? Thanks A.

2 2

RPi3 MAC address
by Alessio Ciregia 22 Jun '17

22 Jun '17

I'm using Fedora 26 on a Raspberry Pi 3. Is it normal that at each reboot (or shutdown and poweron), the MAC address of the Ethernet card is each time a different one? There is a place where to specify the MAC address of the Ethernet card? Thanks A.

4 7

Fedora ARM & AArch64 Status Meeting Minutes 2017-05-23
by Paul Whalen 29 May '17

29 May '17

1 0

[Fedocal] Reminder meeting : Fedora ARM & AArch64 status meeting
by pwhalen＠redhat.com 28 May '17

28 May '17

Dear all, You are kindly invited to the meeting: Fedora ARM & AArch64 status meeting on 2017-05-30 from 15:00:00 to 16:00:00 UTC At fedora-meeting-2(a)irc.freenode.net The meeting will be about: Fedora ARM & AArch64 weekly status meeting. More information available at: [https://fedoraproject.org/wiki/Architectures/ARM](https://fedoraproject.org… Source: https://apps.fedoraproject.org/calendar/meeting/5170/

1 0

U-Boot not working with imx6
by Andrew Gillis 23 May '17

23 May '17

I am using an imx6 SoM from SolidRun. We have purchased a large number of these and mostly they work fine. I tried to update to Fedora 25 and now a few of them won't boot. (most work fine) All my SoMs are all supposed to be the same but some must be different. Both worked fine with an older version of Fedora Is there any way to just force a boot from MMC1 with no checks? I tried to update to the u-boot from Fedora 26 just to see if that would help. It does not. This is what I get with the "bad" ones U-Boot SPL 2016.09.01 (Oct 19 2016 - 14:40:29) Trying to boot from unknown boot device SPL: Unsupported Boot Device! SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### The ones that boot correctly do this U-Boot SPL 2016.09.01 (Oct 19 2016 - 14:40:29) Trying to boot from MMC1 U-Boot 2016.09.01 (Oct 19 2016 - 14:40:29 +0000) CPU: Freescale i.MX6DL rev1.3 996 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 28C Reset cause: POR Board: MX6 Hummingboard DRAM: 1 GiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment -- Andrew Gillis Small Green Computer 603-488-0617

2 3

[Fedocal] Reminder meeting : Fedora ARM & AArch64 status meeting
by pwhalen＠redhat.com 21 May '17

21 May '17

Dear all, You are kindly invited to the meeting: Fedora ARM & AArch64 status meeting on 2017-05-23 from 15:00:00 to 16:00:00 UTC At fedora-meeting-2(a)irc.freenode.net The meeting will be about: Fedora ARM & AArch64 weekly status meeting. More information available at: [https://fedoraproject.org/wiki/Architectures/ARM](https://fedoraproject.org… Source: https://apps.fedoraproject.org/calendar/meeting/5170/

1 0

Fedora ARM & AArch64 Status Meeting Minutes 2017-05-16
by Paul Whalen 16 May '17

16 May '17

======================================================== #fedora-meeting-2: Fedora ARM and AArch64 Status Meeting ======================================================== Meeting started by pwhalen at 15:00:07 UTC. The full logs are available at https://meetbot.fedoraproject.org/fedora-meeting-2/2017-05-16/fedora_arm_an… . Meeting summary --------------- * 1) ==== Userspace Status ==== (pwhalen, 15:04:53) * Mass rebuild needed for subset of packages on armhfp and aarch64 due to ABI change in GCC. (pwhalen, 15:05:05) * LINK: https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org… (pwhalen, 15:05:17) * Special thanks to the tools team for doing the test rebuild to get a list of affected packages. (pwhalen, 15:05:27) * Rebuild in progress by Release Engineering. (pwhalen, 15:05:27) * Upstream support for RAS in aarch64, do we lack any userspace packages in Fedora? (pwhalen, 15:06:08) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=1449837 (jlinton, 15:10:19) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=1443938 (pwhalen, 15:22:37) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=1450995 (pwhalen, 15:23:02) * Assistance with Firefox build failures on arm greatly appreciated. (pwhalen, 15:27:04) * 2) ==== Kernel Status ==== (pwhalen, 15:30:55) * 4.11.0-1.fc26 does not boot on aarch64 due to miscompilation, required a rebuild with the latest GCC. Fixed with 4.11.0-2. (pwhalen, 15:30:44) * Latest in F26: kernel-4.11.1-300.fc26 - https://koji.fedoraproject.org/koji/buildinfo?buildID=892489 (pwhalen, 15:30:53) * Latest in Rawhide: kernel-4.12.0-0.rc1.git0.1.fc27 https://koji.fedoraproject.org/koji/buildinfo?buildID=892258 (pwhalen, 15:30:54) * 3) ==== Bootloader Status ==== (pwhalen, 15:42:55) * 4) ==== F26 Beta ==== (pwhalen, 15:46:29) * F26 Beta Freeze today (11may17), release scheduled for May 30th. (pwhalen, 15:47:22) * Latest nominated compose - Fedora_26_Branched_20170513.n.0 (pwhalen, 15:47:54) * LINK: https://fedoraproject.org/wiki/Test_Results:Fedora_26_Branched_20170513.n.0… (pwhalen, 15:47:54) * LINK: https://fedoraproject.org/wiki/Architectures/AArch64/QA/Fedora-26-20170513.… (pwhalen, 15:47:54) * Full list of blockers: https://qa.fedoraproject.org/blockerbugs/milestone/26/beta/buglist (pwhalen, 15:48:37) * Please test and report any issues to the list or #fedora-arm. If you open a bug, please link to the ARMTracker. (pwhalen, 15:52:42) * 5) == Open Floor == (pwhalen, 15:53:33) Meeting ended at 15:56:36 UTC. Action Items ------------ Action Items, by person ----------------------- * **UNASSIGNED** * (none) People Present (lines said) --------------------------- * pwhalen (50) * pbrobinson (36) * jlinton (22) * jonmasters (18) * rric (16) * hrw (7) * ahs3_ (7) * zodbot (5) * alciregi (2) Generated by `MeetBot`_ 0.1.4 .. _`MeetBot`: http://wiki.debian.org/MeetBot

1 0

[Fedocal] Reminder meeting : Fedora ARM & AArch64 status meeting
by pwhalen＠redhat.com 15 May '17

15 May '17

Dear all, You are kindly invited to the meeting: Fedora ARM & AArch64 status meeting on 2017-05-16 from 15:00:00 to 16:00:00 UTC At fedora-meeting-2(a)irc.freenode.net The meeting will be about: Fedora ARM & AArch64 weekly status meeting. More information available at: [https://fedoraproject.org/wiki/Architectures/ARM](https://fedoraproject.org… Source: https://apps.fedoraproject.org/calendar/meeting/5170/

2 1

KVM on Raspi3
by Jon Masters 15 May '17

15 May '17

Hi, I haven't looked into this, but the following merge for 4.12 got flagged for followup: http://www.spinics.net/lists/kvm/msg149582.html Others might find this interesting. I guess it boots at EL2 these days then - haven't played with the latest generation much - but I don't know if there are additional weirdness beyond just the interrupt controller setup (which is known to be very odd). Jon. -- Computer Architect | Sent from my 64-bit #ARM Powered phone

2 2

Minimal image and initial setup issue
by Alessio Ciregia 12 May '17

12 May '17

Running Fedora 26 Minimal (20170504.n.1 compose) inside a kvm virtual machine, all goes well. Using it in a Raspberry Pi 3 model B, the boot process is ok, the system is subsequently functional, but I have an issue with initial setup process: in other words the systemd initial-setup unit fails to start. <https://bugzilla.redhat.com/show_bug.cgi?id=1449391> Please note that I don't use a screen, but I'm connected to the RPi using the serial connection. Someone else is facing the same issue? Thanks A.

2 2

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

arm May 2017