arm June 2018

arm@lists.fedoraproject.org

8 participants
13 discussions

Udoo Neo : USB known to work ?
by Ken Harris 12 Sep '18

12 Sep '18

I bought a Udoo Neo and put Fedora on it. It works well, but when I plug in USB devices, they don't show up. Is USB on Udoo Neo known to work ? I thought I'd ask before trying to isolate it (I'll download "udoobuntu"). Please share any tips on how to isolate the problem. It could be a personal problem : I bought it from EBay. Thanks, Ken

3 10

[RaspberryPI 3B] [unicorn Hat] [how to configure spi]
by Pierre-Francois RENARD 30 Aug '18

30 Aug '18

Hello I am running raspberry pi3B and with lastest fedora 28 (with kernel 4.16.0-300.fc28.aarch64) I read from the unicorn Hat that I need to activate SPI using raspi-config ( for raspbian only) So I tried to do it manually .. and that's when everything did not go so well :) I understood that I have to tune /boot/efi/config.txt file adding device_tree_param=spi=on I guess I have also to add a dtoverlay line but I don't which one ... Thanks

6 28

[Fedocal] Reminder meeting : Fedora ARM & AArch64 status meeting
by pwhalen＠redhat.com 24 Jun '18

24 Jun '18

Dear all, You are kindly invited to the meeting: Fedora ARM & AArch64 status meeting on 2018-06-26 from 15:00:00 to 16:00:00 UTC At fedora-meeting-2(a)irc.freenode.net The meeting will be about: Fedora ARM & AArch64 weekly status meeting. More information available at: [https://fedoraproject.org/wiki/Architectures/ARM](https://fedoraproject.org… Source: https://apps.fedoraproject.org/calendar/meeting/9202/

1 0

Real time clock on Udoo Neo : how to configure ?
by Ken Harris 21 Jun '18

21 Jun '18

People : I'm trying to get the RTC working on a Udoo Neo. I installed a battery and set the RTC and it keeps running (a bit fast) while powered off, but on power up the system clock is several months off (11 may). It's not clear how configure this. Should I use timedatectl (in systemd) or timedatex (https://github.com/mlichvar/timedatex) or something else ? Thanks, Ken

2 1

Fedora ARM & AArch64 Status Meeting Minutes 2018-06-19
by Paul Whalen 20 Jun '18

20 Jun '18

Sorry for the delay! ======================================================== #fedora-meeting-2: Fedora ARM and AArch64 Status Meeting ======================================================== Meeting started by pwhalen at 15:00:41 UTC. The full logs are available at https://meetbot.fedoraproject.org/fedora-meeting-2/2018-06-19/fedora_arm_an… . Meeting summary --------------- * roll call (pwhalen, 15:00:42) * 1) ==== Userspace Status ==== (pwhalen, 15:05:44) * Nothing reported. (pwhalen, 15:07:35) * 2) ==== Kernel Status ==== (pwhalen, 15:07:44) * Fedora 28: kernel-4.17.2-200.fc28 (pwhalen, 15:07:57) * LINK: https://koji.fedoraproject.org/koji/buildinfo?buildID=1093083 (pwhalen, 15:07:58) * 4.17.2 is on it's way to F-28 so please test and report issues, don't forget to add ARMTracker as a block if you do this in bugzilla (pbrobinson, 15:08:33) * Rawhide: kernel-4.18.0-0.rc1.git0.1.fc29 (pwhalen, 15:09:51) * LINK: https://koji.fedoraproject.org/koji/buildinfo?buildID=1093030 (pwhalen, 15:09:51) * Please test and report any issues to the list or #fedora-arm. (pwhalen, 15:12:13) * 3) ==== Bootloader Status ==== (pwhalen, 15:12:53) * New U-Boot - uboot-tools-2018.07-0.2.rc1.fc29 (pwhalen, 15:13:20) * Changes: Update sunxi MMC patch series, Tegra Nyan patch, SolidRun i.MX6 SoM rev 1.5 patch (pwhalen, 15:13:20) * LINK: https://koji.fedoraproject.org/koji/buildinfo?buildID=1089876 (pwhalen, 15:13:20) * 2018.07 RC2 due today (pwhalen, 15:13:37) * 4) == F29 Testing == (pwhalen, 15:15:01) * Latest nominated nightly - https://fedoraproject.org/wiki/Test_Results:Current_Installation_Test (pwhalen, 15:15:16) * 5) == Open Floor == (pwhalen, 15:17:49) Meeting ended at 15:19:37 UTC. Action Items ------------ Action Items, by person ----------------------- * **UNASSIGNED** * (none) People Present (lines said) --------------------------- * pwhalen (34) * pbrobinson (10) * zodbot (6) Generated by `MeetBot`_ 0.1.4 .. _`MeetBot`: http://wiki.debian.org/MeetBot

1 0

[Fedocal] Reminder meeting : Fedora ARM & AArch64 status meeting
by pwhalen＠redhat.com 20 Jun '18

20 Jun '18

Dear all, You are kindly invited to the meeting: Fedora ARM & AArch64 status meeting on 2018-06-19 from 15:00:00 to 16:00:00 UTC At fedora-meeting-2(a)irc.freenode.net The meeting will be about: Fedora ARM & AArch64 weekly status meeting. More information available at: [https://fedoraproject.org/wiki/Architectures/ARM](https://fedoraproject.org… Source: https://apps.fedoraproject.org/calendar/meeting/9202/

3 4

aarch64 copr?
by Avi Kivity 13 Jun '18

13 Jun '18

Hello, What are the prospects for getting aarch64 copr? Copr is very useful for bringing bleeding edge Fedora packages to CentOS/RHEL users.

3 3

[Fedocal] Reminder meeting : Fedora ARM & AArch64 status meeting
by pwhalen＠redhat.com 10 Jun '18

10 Jun '18

Dear all, You are kindly invited to the meeting: Fedora ARM & AArch64 status meeting on 2018-06-12 from 15:00:00 to 16:00:00 UTC At fedora-meeting-2(a)irc.freenode.net The meeting will be about: Fedora ARM & AArch64 weekly status meeting. More information available at: [https://fedoraproject.org/wiki/Architectures/ARM](https://fedoraproject.org… Source: https://apps.fedoraproject.org/calendar/meeting/9202/

1 0

Two questions about BeagleBone Black
by Zamir SUN 08 Jun '18

08 Jun '18

Hi, I have two questions about BeagleBone Black. 1. Is there anyway to make it boot when plug into power adapter? By this I mean, without the matter of push the power button. 2. I see by console=ttyO0 cannot get the log printed onto serial now. Although I know console=tty0 can still make the logs printed to a screen, but showing on the serial is always easier for debug. So is there anywhere I can check the new console name? Thanks! -- Ziqian SUN (Zamir) GPG : 1D86 6D4A 49CE 4BBD 72CF FCF5 D856 6E11 F2A0 525E Want to know more about Fedora? Visit https://fedoraproject.org/wiki/ Ready to contribute? See https://whatcanidoforfedora.org/

4 5

Fedora28 - new kernel above 4.16.8-300 doesn't work
by Patrick Pichon 05 Jun '18

05 Jun '18

Kernel 4.16.8-300 is the latest one which can get my RPI3B+ booting. - Kernel Panic at boot time For now I have found a lot of dracut error in the log during the dnf upgrade process Jun 04 18:12:37 pi3 dracut[2448]: *** Including module: fs-lib *** Jun 04 18:12:38 pi3 dracut[2448]: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.Nmhf4U/initramfs -l /usr/lib/dracut/modules.d/99fs-lib/fs-lib.sh /lib/fs-lib.sh Jun 04 18:12:38 pi3 dracut[2448]: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.Nmhf4U/initramfs /etc/e2fsck.conf Jun 04 18:12:38 pi3 dracut[2448]: *** Including module: shutdown *** Jun 04 18:12:38 pi3 dracut[2448]: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.Nmhf4U/initramfs -a -l umount poweroff reboot halt losetup stat Jun 04 18:12:38 pi3 dracut[2448]: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.Nmhf4U/initramfs -l /usr/lib/dracut/modules.d/99shutdown/shutdown.sh /shutdown Jun 04 18:12:39 pi3 dracut[2448]: *** Including modules done *** Jun 04 18:12:39 pi3 dracut[2448]: *** Installing kernel module dependencies *** Jun 04 18:12:39 pi3 dracut[2448]: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.Nmhf4U/initramfs /lib/modules/4.16.13-300.fc28.armv7hl//modules.builtin.bin /lib/modules/4.16.13-300.fc28.armv7hl/modules.builtin.bin Jun 04 18:12:39 pi3 dracut[2448]: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.Nmhf4U/initramfs /lib/modules/4.16.13-300.fc28.armv7hl//modules.builtin /lib/modules/4.16.13-300.fc28.armv7hl/modules.builtin Jun 04 18:12:39 pi3 dracut[2448]: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.Nmhf4U/initramfs /lib/modules/4.16.13-300.fc28.armv7hl//modules.order /lib/modules/4.16.13-300.fc28.armv7hl/modules.order Jun 04 18:12:39 pi3 dracut[2448]: "depmod -a 4.16.13-300.fc28.armv7hl" failed.

3 3

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

arm June 2018