Well I hate for my first post to be a dump, but such is life. I downloaded Fedora 18 from
http://dl.fedoraproject.org/pub/fedora-secondary/releases/18/Images/armhfp/
and specifically
Fedora-18-beagle-armhfp.img.xz
I have run Fedora 17 on the board, so I know how to correctly write the image to the sd card.
This is all the output I have to the serial port after booting:
On Thu, Feb 7, 2013 at 9:33 AM, gary lists@lazygranch.com wrote:
Well I hate for my first post to be a dump, but such is life. I downloaded Fedora 18 from
http://dl.fedoraproject.org/pub/fedora-secondary/releases/18/Images/armhfp/
and specifically
Fedora-18-beagle-armhfp.img.xz
I have run Fedora 17 on the board, so I know how to correctly write the image to the sd card.
This is all the output I have to the serial port after booting:
I believe we might have an issue with the MMC card being detected, unfortunately I've not had time to properly debug the issue on mine as yet.
Peter
On 02/07/2013 05:38 PM, Peter Robinson wrote:
On Thu, Feb 7, 2013 at 9:33 AM, gary lists@lazygranch.com wrote:
Well I hate for my first post to be a dump, but such is life. I downloaded Fedora 18 from
http://dl.fedoraproject.org/pub/fedora-secondary/releases/18/Images/armhfp/
and specifically
Fedora-18-beagle-armhfp.img.xz
I have run Fedora 17 on the board, so I know how to correctly write the image to the sd card.
This is all the output I have to the serial port after booting:
I believe we might have an issue with the MMC card being detected, unfortunately I've not had time to properly debug the issue on mine as yet.
Peter
The Fedora 17 installation on my Beagleboard XM broke today after a yum update. It can't seem to see and use the SD card properly. I thought I'd try Fedora 18, and it fails in the same way. I tried several different makes and models of SD card and they all fail in the same way.
Does anyone have Fedora 18 running properly on a Beagleboard XM? Is so what model of SD card are you using?
Steve
Well I hate for my first post to be a dump, but such is life. I downloaded Fedora 18 from
http://dl.fedoraproject.org/pub/fedora-secondary/releases/18/Images/armhfp/
and specifically
Fedora-18-beagle-armhfp.img.xz
I have run Fedora 17 on the board, so I know how to correctly write the image to the sd card.
This is all the output I have to the serial port after booting:
I believe we might have an issue with the MMC card being detected, unfortunately I've not had time to properly debug the issue on mine as yet.
Peter
The Fedora 17 installation on my Beagleboard XM broke today after a yum update. It can't seem to see and use the SD card properly. I thought I'd try Fedora 18, and it fails in the same way. I tried several different makes and models of SD card and they all fail in the same way.
Does anyone have Fedora 18 running properly on a Beagleboard XM? Is so what model of SD card are you using?
It's not an issue with the SD card. There were changes made in the kernel that meant the kernel didn't work. With a 3.8/3.9 kernel when used with a dtb file the F-18 image boots fine off the MMC card but the USB is non functional which means you don't have networking either.
The issues with the USB when used in conjunction with DTB have been resolved in 3.10 and as of yesterday I have my beagle xM booting with usb. I've got one outstanding issue to resolve as the usb hub isn't powering up but usb is detected and seems to work OK.
We won't be supporting any of the beagle* platforms out of the gate on F-19 but I plan to do a remix which includes the 3.10 kernel which I'm hoping will work with all the beagle* platforms. Once F19 is rebased to 3.10 this should then continue on as a standard kernel with luck.
I'll send out a separate announcement once I have something for wider testing.
Peter
-
lists -
Peter Robinson -
Steve Underwood