Hi All,
Just a heads up that the u-boot 2014.10 GA is on it's way to Fedora 21.
https://admin.fedoraproject.org/updates/uboot-tools-2014.10-1.fc21
This release contains numerous fixes and improvements over the currently shipping release including, but by no means limited to: * Upstream generic distro support (huge thanks to Dennis Gilmore and Steven Warren for their tireless work to get this upstream * AllWinner suppport for A10*/A13/A20 devices (huge thanks to Hans for this tireless work on this) * Numerous other improvements too long to name.
New devices that we now enable in this release, in no particular order, include:
AllWinner: A10-OLinuXino-Lime A10s-OLinuXino-M A13-OLinuXino A13-OLinuXinoM A20-OLinuXino_MICRO Bananapi Cubieboard Cubieboard2 Cubietruck Mele_A1000 Mele_A1000G Mini-X Mini-X-1Gb
Tegra: jetson-tk1
i.MX6 cm_fx6 (Utilite) riotboard
It's not yet in nightly builds but I'm going to request it for the next Beta TC compose.
Known issues: * Panda is not yet ported to generic distro support
Please test and provide feedback.
Peter
Hopefully I did something wrong, but it's not working at all for me on the beaglebone black:
Here is what I get when I try to boot from eMMC:
U-Boot SPL 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04) omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear spl: mmc init failed: err - -19 ### ERROR ### Please RESET the board ###
Here is what I get when I make a new SD card from the latest minimal image:
U-Boot 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04)
Watchdog enabled I2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Error - No Valid Environment Area found *** Warning - bad CRC, using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:2... Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Card did not respond to voltage select! Booting from nand ...
no devices available
no devices available Bad Linux ARM zImage magic!
When I am in the uboot command processor, I cannot select the internal eMMC at all:
U-Boot# mmc dev 1 Card did not respond to voltage select!
Previously, I was booting with no problems from either eMMC or SD with F21.
Thanks,
Adam
On Wed, Oct 15, 2014 at 6:34 AM, Peter Robinson pbrobinson@gmail.com wrote:
Hi All,
Just a heads up that the u-boot 2014.10 GA is on it's way to Fedora 21.
https://admin.fedoraproject.org/updates/uboot-tools-2014.10-1.fc21
This release contains numerous fixes and improvements over the currently shipping release including, but by no means limited to:
- Upstream generic distro support (huge thanks to Dennis Gilmore and
Steven Warren for their tireless work to get this upstream
- AllWinner suppport for A10*/A13/A20 devices (huge thanks to Hans for
this tireless work on this)
- Numerous other improvements too long to name.
New devices that we now enable in this release, in no particular order, include:
AllWinner: A10-OLinuXino-Lime A10s-OLinuXino-M A13-OLinuXino A13-OLinuXinoM A20-OLinuXino_MICRO Bananapi Cubieboard Cubieboard2 Cubietruck Mele_A1000 Mele_A1000G Mini-X Mini-X-1Gb
Tegra: jetson-tk1
i.MX6 cm_fx6 (Utilite) riotboard
It's not yet in nightly builds but I'm going to request it for the next Beta TC compose.
Known issues:
- Panda is not yet ported to generic distro support
Please test and provide feedback.
Peter _______________________________________________ arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm
A minor bug and is fixed in uboot-tools-2014.10-3.fc21
Peter
On Sat, Oct 18, 2014 at 9:04 PM, Adam Goode adam@spicenitz.org wrote:
Hopefully I did something wrong, but it's not working at all for me on the beaglebone black:
Here is what I get when I try to boot from eMMC:
U-Boot SPL 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04) omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear spl: mmc init failed: err - -19 ### ERROR ### Please RESET the board ###
Here is what I get when I make a new SD card from the latest minimal image:
U-Boot 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04)
Watchdog enabledI2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Error - No Valid Environment Area found *** Warning - bad CRC, using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:2... Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Card did not respond to voltage select! Booting from nand ...
no devices available
no devices available Bad Linux ARM zImage magic!
When I am in the uboot command processor, I cannot select the internal eMMC at all:
U-Boot# mmc dev 1 Card did not respond to voltage select!
Previously, I was booting with no problems from either eMMC or SD with F21.
Thanks,
Adam
On Wed, Oct 15, 2014 at 6:34 AM, Peter Robinson pbrobinson@gmail.com wrote:
Hi All,
Just a heads up that the u-boot 2014.10 GA is on it's way to Fedora 21.
https://admin.fedoraproject.org/updates/uboot-tools-2014.10-1.fc21
This release contains numerous fixes and improvements over the currently shipping release including, but by no means limited to:
- Upstream generic distro support (huge thanks to Dennis Gilmore and
Steven Warren for their tireless work to get this upstream
- AllWinner suppport for A10*/A13/A20 devices (huge thanks to Hans for
this tireless work on this)
- Numerous other improvements too long to name.
New devices that we now enable in this release, in no particular order, include:
AllWinner: A10-OLinuXino-Lime A10s-OLinuXino-M A13-OLinuXino A13-OLinuXinoM A20-OLinuXino_MICRO Bananapi Cubieboard Cubieboard2 Cubietruck Mele_A1000 Mele_A1000G Mini-X Mini-X-1Gb
Tegra: jetson-tk1
i.MX6 cm_fx6 (Utilite) riotboard
It's not yet in nightly builds but I'm going to request it for the next Beta TC compose.
Known issues:
- Panda is not yet ported to generic distro support
Please test and provide feedback.
Peter _______________________________________________ arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm
On 2014-10-24 12:21, Peter Robinson wrote:
A minor bug and is fixed in uboot-tools-2014.10-3.fc21
Does this also fix booting on the Pandaboard?
On Fri, Oct 24, 2014 at 6:31 PM, Yaakov Selkowitz yselkowi@redhat.com wrote:
On 2014-10-24 12:21, Peter Robinson wrote:
A minor bug and is fixed in uboot-tools-2014.10-3.fc21
Does this also fix booting on the Pandaboard?
Not yet
This is still present with -3. It looks like this version of U-Boot is not capable of booting from the internal eMMC on beaglebone black.
U-Boot SPL 2014.10-g4647503-dirty (Oct 24 2014 - 16:47:41) omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear spl: mmc init failed: err - -19 ### ERROR ### Please RESET the board ###
I found at least another thread about this issue, from version 2014.07: https://www.mail-archive.com/meta-ti@yoctoproject.org/msg04279.html
Adam
On Fri, Oct 24, 2014 at 1:21 PM, Peter Robinson pbrobinson@gmail.com wrote:
A minor bug and is fixed in uboot-tools-2014.10-3.fc21
Peter
On Sat, Oct 18, 2014 at 9:04 PM, Adam Goode adam@spicenitz.org wrote:
Hopefully I did something wrong, but it's not working at all for me on the beaglebone black:
Here is what I get when I try to boot from eMMC:
U-Boot SPL 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04) omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear spl: mmc init failed: err - -19 ### ERROR ### Please RESET the board ###
Here is what I get when I make a new SD card from the latest minimal image:
U-Boot 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04)
Watchdog enabledI2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Error - No Valid Environment Area found *** Warning - bad CRC, using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:2... Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Card did not respond to voltage select! Booting from nand ...
no devices available
no devices available Bad Linux ARM zImage magic!
When I am in the uboot command processor, I cannot select the internal eMMC at all:
U-Boot# mmc dev 1 Card did not respond to voltage select!
Previously, I was booting with no problems from either eMMC or SD with F21.
Thanks,
Adam
On Wed, Oct 15, 2014 at 6:34 AM, Peter Robinson pbrobinson@gmail.com wrote:
Hi All,
Just a heads up that the u-boot 2014.10 GA is on it's way to Fedora 21.
https://admin.fedoraproject.org/updates/uboot-tools-2014.10-1.fc21
This release contains numerous fixes and improvements over the currently shipping release including, but by no means limited to:
- Upstream generic distro support (huge thanks to Dennis Gilmore and
Steven Warren for their tireless work to get this upstream
- AllWinner suppport for A10*/A13/A20 devices (huge thanks to Hans for
this tireless work on this)
- Numerous other improvements too long to name.
New devices that we now enable in this release, in no particular order, include:
AllWinner: A10-OLinuXino-Lime A10s-OLinuXino-M A13-OLinuXino A13-OLinuXinoM A20-OLinuXino_MICRO Bananapi Cubieboard Cubieboard2 Cubietruck Mele_A1000 Mele_A1000G Mini-X Mini-X-1Gb
Tegra: jetson-tk1
i.MX6 cm_fx6 (Utilite) riotboard
It's not yet in nightly builds but I'm going to request it for the next Beta TC compose.
Known issues:
- Panda is not yet ported to generic distro support
Please test and provide feedback.
Peter _______________________________________________ arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm
On Mon, Oct 27, 2014 at 7:37 PM, Adam Goode adam@spicenitz.org wrote:
This is still present with -3. It looks like this version of U-Boot is not capable of booting from the internal eMMC on beaglebone black.
U-Boot SPL 2014.10-g4647503-dirty (Oct 24 2014 - 16:47:41) omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear spl: mmc init failed: err - -19 ### ERROR ### Please RESET the board ###
Which "config" did you guys build against for 2014.10, i had to do this small change to get the eMMC to also work:
https://github.com/RobertCNelson/Bootloader-Builder/blob/master/patches/v201...
diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig index 2e5aeaa..4cc7e19 100644 --- a/configs/am335x_evm_defconfig +++ b/configs/am335x_evm_defconfig @@ -1,5 +1,4 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" -CONFIG_CONS_INDEX=1 +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" +S:CONFIG_ARM=y +S:CONFIG_TARGET_AM335X_EVM=y
Regards,
A one-line change to the specfile fixed eMMC booting for me (also tested with booting from SD card):
Change "make am335x_evm_config" to "make am335x_boneblack_config".
I believe this is the correct config, as shown here: http://git.denx.de/?p=u-boot.git;a=commitdiff;h=b6ab550413b6b64d0024e9dec8bf...
If this breaks the beaglebone white, you might need to introduce a new board in the RPM.
Adam
On Mon, Oct 27, 2014 at 8:44 PM, Robert Nelson robertcnelson@gmail.com wrote:
On Mon, Oct 27, 2014 at 7:37 PM, Adam Goode adam@spicenitz.org wrote:
This is still present with -3. It looks like this version of U-Boot is not capable of booting from the internal eMMC on beaglebone black.
U-Boot SPL 2014.10-g4647503-dirty (Oct 24 2014 - 16:47:41) omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear spl: mmc init failed: err - -19 ### ERROR ### Please RESET the board ###
Which "config" did you guys build against for 2014.10, i had to do this small change to get the eMMC to also work:
https://github.com/RobertCNelson/Bootloader-Builder/blob/master/patches/v201...
diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig index 2e5aeaa..4cc7e19 100644 --- a/configs/am335x_evm_defconfig +++ b/configs/am335x_evm_defconfig @@ -1,5 +1,4 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" -CONFIG_CONS_INDEX=1 +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" +S:CONFIG_ARM=y +S:CONFIG_TARGET_AM335X_EVM=y
Regards,
-- Robert Nelson http://www.rcn-ee.com/
I filed a bug for the beaglebone black eMMC problem: https://bugzilla.redhat.com/show_bug.cgi?id=1161619
Adam
On Sun, Nov 2, 2014 at 11:32 PM, Adam Goode adam@spicenitz.org wrote:
A one-line change to the specfile fixed eMMC booting for me (also tested with booting from SD card):
Change "make am335x_evm_config" to "make am335x_boneblack_config".
I believe this is the correct config, as shown here: http://git.denx.de/?p=u-boot.git;a=commitdiff;h=b6ab550413b6b64d0024e9dec8bf...
If this breaks the beaglebone white, you might need to introduce a new board in the RPM.
Adam
On Mon, Oct 27, 2014 at 8:44 PM, Robert Nelson robertcnelson@gmail.com wrote:
On Mon, Oct 27, 2014 at 7:37 PM, Adam Goode adam@spicenitz.org wrote:
This is still present with -3. It looks like this version of U-Boot is not capable of booting from the internal eMMC on beaglebone black.
U-Boot SPL 2014.10-g4647503-dirty (Oct 24 2014 - 16:47:41) omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear spl: mmc init failed: err - -19 ### ERROR ### Please RESET the board ###
Which "config" did you guys build against for 2014.10, i had to do this small change to get the eMMC to also work:
https://github.com/RobertCNelson/Bootloader-Builder/blob/master/patches/v201...
diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig index 2e5aeaa..4cc7e19 100644 --- a/configs/am335x_evm_defconfig +++ b/configs/am335x_evm_defconfig @@ -1,5 +1,4 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" -CONFIG_CONS_INDEX=1 +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" +S:CONFIG_ARM=y +S:CONFIG_TARGET_AM335X_EVM=y
Regards,
-- Robert Nelson http://www.rcn-ee.com/
Already got one locally being tested, should be pushed tomorrow.
Peter
On Fri, Nov 7, 2014 at 2:06 PM, Adam Goode adam@spicenitz.org wrote:
I filed a bug for the beaglebone black eMMC problem: https://bugzilla.redhat.com/show_bug.cgi?id=1161619
Adam
On Sun, Nov 2, 2014 at 11:32 PM, Adam Goode adam@spicenitz.org wrote:
A one-line change to the specfile fixed eMMC booting for me (also tested with booting from SD card):
Change "make am335x_evm_config" to "make am335x_boneblack_config".
I believe this is the correct config, as shown here: http://git.denx.de/?p=u-boot.git;a=commitdiff;h=b6ab550413b6b64d0024e9dec8bf...
If this breaks the beaglebone white, you might need to introduce a new board in the RPM.
Adam
On Mon, Oct 27, 2014 at 8:44 PM, Robert Nelson robertcnelson@gmail.com wrote:
On Mon, Oct 27, 2014 at 7:37 PM, Adam Goode adam@spicenitz.org wrote:
This is still present with -3. It looks like this version of U-Boot is not capable of booting from the internal eMMC on beaglebone black.
U-Boot SPL 2014.10-g4647503-dirty (Oct 24 2014 - 16:47:41) omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear spl: mmc init failed: err - -19 ### ERROR ### Please RESET the board ###
Which "config" did you guys build against for 2014.10, i had to do this small change to get the eMMC to also work:
https://github.com/RobertCNelson/Bootloader-Builder/blob/master/patches/v201...
diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig index 2e5aeaa..4cc7e19 100644 --- a/configs/am335x_evm_defconfig +++ b/configs/am335x_evm_defconfig @@ -1,5 +1,4 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" -CONFIG_CONS_INDEX=1 +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" +S:CONFIG_ARM=y +S:CONFIG_TARGET_AM335X_EVM=y
Regards,
-- Robert Nelson http://www.rcn-ee.com/
Hi Adam,
Problem should now be fixed with -5
Can you test and provide karma so we can get it in GA.
https://admin.fedoraproject.org/updates/FEDORA-2014-14716/uboot-tools-2014.1...
On Tue, Oct 28, 2014 at 12:37 AM, Adam Goode adam@spicenitz.org wrote:
This is still present with -3. It looks like this version of U-Boot is not capable of booting from the internal eMMC on beaglebone black.
U-Boot SPL 2014.10-g4647503-dirty (Oct 24 2014 - 16:47:41) omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear spl: mmc init failed: err - -19 ### ERROR ### Please RESET the board ###
I found at least another thread about this issue, from version 2014.07: https://www.mail-archive.com/meta-ti@yoctoproject.org/msg04279.html
Adam
On Fri, Oct 24, 2014 at 1:21 PM, Peter Robinson pbrobinson@gmail.com wrote:
A minor bug and is fixed in uboot-tools-2014.10-3.fc21
Peter
On Sat, Oct 18, 2014 at 9:04 PM, Adam Goode adam@spicenitz.org wrote:
Hopefully I did something wrong, but it's not working at all for me on the beaglebone black:
Here is what I get when I try to boot from eMMC:
U-Boot SPL 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04) omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear spl: mmc init failed: err - -19 ### ERROR ### Please RESET the board ###
Here is what I get when I make a new SD card from the latest minimal image:
U-Boot 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04)
Watchdog enabledI2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Error - No Valid Environment Area found *** Warning - bad CRC, using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:2... Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Card did not respond to voltage select! Booting from nand ...
no devices available
no devices available Bad Linux ARM zImage magic!
When I am in the uboot command processor, I cannot select the internal eMMC at all:
U-Boot# mmc dev 1 Card did not respond to voltage select!
Previously, I was booting with no problems from either eMMC or SD with F21.
Thanks,
Adam
On Wed, Oct 15, 2014 at 6:34 AM, Peter Robinson pbrobinson@gmail.com wrote:
Hi All,
Just a heads up that the u-boot 2014.10 GA is on it's way to Fedora 21.
https://admin.fedoraproject.org/updates/uboot-tools-2014.10-1.fc21
This release contains numerous fixes and improvements over the currently shipping release including, but by no means limited to:
- Upstream generic distro support (huge thanks to Dennis Gilmore and
Steven Warren for their tireless work to get this upstream
- AllWinner suppport for A10*/A13/A20 devices (huge thanks to Hans for
this tireless work on this)
- Numerous other improvements too long to name.
New devices that we now enable in this release, in no particular order, include:
AllWinner: A10-OLinuXino-Lime A10s-OLinuXino-M A13-OLinuXino A13-OLinuXinoM A20-OLinuXino_MICRO Bananapi Cubieboard Cubieboard2 Cubietruck Mele_A1000 Mele_A1000G Mini-X Mini-X-1Gb
Tegra: jetson-tk1
i.MX6 cm_fx6 (Utilite) riotboard
It's not yet in nightly builds but I'm going to request it for the next Beta TC compose.
Known issues:
- Panda is not yet ported to generic distro support
Please test and provide feedback.
Peter _______________________________________________ arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm
Works great for me! Thanks.
Does anyone have a beaglebone white? I'm still worried that this fix will break that board.
Adam
On Thu, Nov 13, 2014 at 7:13 AM, Peter Robinson pbrobinson@gmail.com wrote:
Hi Adam,
Problem should now be fixed with -5
Can you test and provide karma so we can get it in GA.
https://admin.fedoraproject.org/updates/FEDORA-2014-14716/uboot-tools-2014.1...
On Tue, Oct 28, 2014 at 12:37 AM, Adam Goode adam@spicenitz.org wrote:
This is still present with -3. It looks like this version of U-Boot is not capable of booting from the internal eMMC on beaglebone black.
U-Boot SPL 2014.10-g4647503-dirty (Oct 24 2014 - 16:47:41) omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear spl: mmc init failed: err - -19 ### ERROR ### Please RESET the board ###
I found at least another thread about this issue, from version 2014.07: https://www.mail-archive.com/meta-ti@yoctoproject.org/msg04279.html
Adam
On Fri, Oct 24, 2014 at 1:21 PM, Peter Robinson pbrobinson@gmail.com wrote:
A minor bug and is fixed in uboot-tools-2014.10-3.fc21
Peter
On Sat, Oct 18, 2014 at 9:04 PM, Adam Goode adam@spicenitz.org wrote:
Hopefully I did something wrong, but it's not working at all for me on the beaglebone black:
Here is what I get when I try to boot from eMMC:
U-Boot SPL 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04) omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear spl: mmc init failed: err - -19 ### ERROR ### Please RESET the board ###
Here is what I get when I make a new SD card from the latest minimal image:
U-Boot 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04)
Watchdog enabledI2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Error - No Valid Environment Area found *** Warning - bad CRC, using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:2... Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Card did not respond to voltage select! Booting from nand ...
no devices available
no devices available Bad Linux ARM zImage magic!
When I am in the uboot command processor, I cannot select the internal eMMC at all:
U-Boot# mmc dev 1 Card did not respond to voltage select!
Previously, I was booting with no problems from either eMMC or SD with F21.
Thanks,
Adam
On Wed, Oct 15, 2014 at 6:34 AM, Peter Robinson pbrobinson@gmail.com wrote:
Hi All,
Just a heads up that the u-boot 2014.10 GA is on it's way to Fedora 21.
https://admin.fedoraproject.org/updates/uboot-tools-2014.10-1.fc21
This release contains numerous fixes and improvements over the currently shipping release including, but by no means limited to:
- Upstream generic distro support (huge thanks to Dennis Gilmore and
Steven Warren for their tireless work to get this upstream
- AllWinner suppport for A10*/A13/A20 devices (huge thanks to Hans for
this tireless work on this)
- Numerous other improvements too long to name.
New devices that we now enable in this release, in no particular order, include:
AllWinner: A10-OLinuXino-Lime A10s-OLinuXino-M A13-OLinuXino A13-OLinuXinoM A20-OLinuXino_MICRO Bananapi Cubieboard Cubieboard2 Cubietruck Mele_A1000 Mele_A1000G Mini-X Mini-X-1Gb
Tegra: jetson-tk1
i.MX6 cm_fx6 (Utilite) riotboard
It's not yet in nightly builds but I'm going to request it for the next Beta TC compose.
Known issues:
- Panda is not yet ported to generic distro support
Please test and provide feedback.
Peter _______________________________________________ arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm
W dniu 13.11.2014 o 15:14, Adam Goode pisze:
Works great for me! Thanks.
Does anyone have a beaglebone white? I'm still worried that this fix will break that board.
I did not followed thread but have working BBW somewhere. can you point me to SD card image which I can use to test?
If you follow these instructions, you can make an SD card: https://fedoraproject.org/wiki/Architectures/ARM/F21/Installation#Scripted
Adam
On Thu, Nov 13, 2014 at 11:08 AM, Marcin Juszkiewicz < mjuszkiewicz@redhat.com> wrote:
W dniu 13.11.2014 o 15:14, Adam Goode pisze:
Works great for me! Thanks.
Does anyone have a beaglebone white? I'm still worried that this fix will break that board.
I did not followed thread but have working BBW somewhere. can you point me to SD card image which I can use to test? _______________________________________________ arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm
----- Original Message -----
Works great for me! Thanks.
Does anyone have a beaglebone white? I'm still worried that this fix will break that board.
Works okay on the Beaglebone White using the F21 TC1 Minimal image. Hit a couple of errors at the beginning, but the system came up fine.
U-Boot SPL 2014.10 (Nov 11 2014 - 07:35:06) No AC power, disabling frequency switch MMC: block number 0x100 exceeds max(0x0) MMC: block number 0x200 exceeds max(0x0) *** Error - No Valid Environment Area found Using default environment ...
Paul
Adam
On Thu, Nov 13, 2014 at 7:13 AM, Peter Robinson pbrobinson@gmail.com wrote:
Hi Adam,
Problem should now be fixed with -5
Can you test and provide karma so we can get it in GA.
https://admin.fedoraproject.org/updates/FEDORA-2014-14716/uboot-tools-2014.1...
On Tue, Oct 28, 2014 at 12:37 AM, Adam Goode adam@spicenitz.org wrote:
This is still present with -3. It looks like this version of U-Boot is not capable of booting from the internal eMMC on beaglebone black.
U-Boot SPL 2014.10-g4647503-dirty (Oct 24 2014 - 16:47:41) omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear spl: mmc init failed: err - -19 ### ERROR ### Please RESET the board ###
I found at least another thread about this issue, from version 2014.07: https://www.mail-archive.com/meta-ti@yoctoproject.org/msg04279.html
Adam
On Fri, Oct 24, 2014 at 1:21 PM, Peter Robinson pbrobinson@gmail.com wrote:
A minor bug and is fixed in uboot-tools-2014.10-3.fc21
Peter
On Sat, Oct 18, 2014 at 9:04 PM, Adam Goode adam@spicenitz.org wrote:
Hopefully I did something wrong, but it's not working at all for me on the beaglebone black:
Here is what I get when I try to boot from eMMC:
U-Boot SPL 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04) omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear spl: mmc init failed: err - -19 ### ERROR ### Please RESET the board ###
Here is what I get when I make a new SD card from the latest minimal image:
U-Boot 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04)
Watchdog enabledI2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Error - No Valid Environment Area found *** Warning - bad CRC, using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:2... Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Card did not respond to voltage select! Booting from nand ...
no devices available
no devices available Bad Linux ARM zImage magic!
When I am in the uboot command processor, I cannot select the internal eMMC at all:
U-Boot# mmc dev 1 Card did not respond to voltage select!
Previously, I was booting with no problems from either eMMC or SD with F21.
Thanks,
Adam
On Wed, Oct 15, 2014 at 6:34 AM, Peter Robinson pbrobinson@gmail.com wrote:
Hi All,
Just a heads up that the u-boot 2014.10 GA is on it's way to Fedora 21.
https://admin.fedoraproject.org/updates/uboot-tools-2014.10-1.fc21
This release contains numerous fixes and improvements over the currently shipping release including, but by no means limited to:
- Upstream generic distro support (huge thanks to Dennis Gilmore and
Steven Warren for their tireless work to get this upstream
- AllWinner suppport for A10*/A13/A20 devices (huge thanks to Hans for
this tireless work on this)
- Numerous other improvements too long to name.
New devices that we now enable in this release, in no particular order, include:
AllWinner: A10-OLinuXino-Lime A10s-OLinuXino-M A13-OLinuXino A13-OLinuXinoM A20-OLinuXino_MICRO Bananapi Cubieboard Cubieboard2 Cubietruck Mele_A1000 Mele_A1000G Mini-X Mini-X-1Gb
Tegra: jetson-tk1
i.MX6 cm_fx6 (Utilite) riotboard
It's not yet in nightly builds but I'm going to request it for the next Beta TC compose.
Known issues:
- Panda is not yet ported to generic distro support
Please test and provide feedback.
Peter _______________________________________________ arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm
arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
On Thu, 13 Nov 2014 09:14:19 -0500 Adam Goode adam@spicenitz.org wrote:
Works great for me! Thanks.
Does anyone have a beaglebone white? I'm still worried that this fix will break that board.
Adam
I tested on my beaglebone white before i submitted the update. it works fine.
Dennis
On Fri, Nov 14, 2014 at 6:24 PM, Dennis Gilmore dennis@ausil.us wrote:
On Thu, 13 Nov 2014 09:14:19 -0500 Adam Goode adam@spicenitz.org wrote:
Works great for me! Thanks.
Does anyone have a beaglebone white? I'm still worried that this fix will break that board.
I tested on my beaglebone white before i submitted the update. it works fine.
I just got my BeagleBone Black out again and the new u-boot seems to be working fine. I even overwrote the old MLO and u-boot.img on the internal eMMC and things still worked fine.
-
Adam Goode -
Dennis Gilmore -
Jeffrey Ollie -
Marcin Juszkiewicz -
Paul Whalen -
Peter Robinson -
Robert Nelson -
Yaakov Selkowitz