On Sun, Jan 25, 2015 at 08:29:38PM +0100, Till Maas wrote:
On Mon, Jan 26, 2015 at 01:20:25AM +0800, Daniel Veillard wrote:
> I tried over and over following the instructions at
The instructions worked for my CubieBoard without any problems in the
week after Christmas.
> Starts to worries me a lot since F19 is EOL'ed soon, I
> have updates on my devices.
Fedora 19 is already EOL.
somehow missed that
> What am I missing ?
Maybe we can spot the error if you write exactly which commands you ran.
It's a CubieBoard(v1) with an A10 second batch with 1GB of RAM, I
remember that Hans script was providing different entries for 512M
and 1GB RAM versions
On a thinkpad T510 with Fedora 21
xzcat ~veillard/Fedora-Minimal-armhfp-21-5-sda.raw.xz > /dev/mmcblk0
(I tried with dd of=/dev/mmcblk0 too) the operation takes a little while ...
eject/reinsert card/umount the automatically mounted partitions
[root@thinkpad ~]# mount /dev/mmcblk0p3 /tmp/root
[root@thinkpad ~]# mount /dev/mmcblk0p1 /tmp/boot
[root@thinkpad ~]# vi /tmp/root/etc/redhat-release
check it's actually an F21, okidoc
[root@thinkpad ~]# dd
if=/tmp/root/usr/share/uboot/Cubieboard/u-boot-sunxi-with-spl.bin of=/dev/mmcblk0 bs=1024
307+1 records in
307+1 records out
315056 bytes (315 kB) copied, 0.029053 s, 10.8 MB/s
[root@thinkpad ~]# sync
[root@thinkpad ~]# umount /tmp/root
[root@thinkpad ~]# umount /tmp/boot
Put the card in the Cubieboard, hook the display, power it on ...
red light for power and nothing.
That same card was running F19 today but the SDcard it used with F19
exhibited problem and booting stops with FS failures, so the Cubie and
its SD reader is working.
Daniel Veillard | Open Source and Standards, Red Hat
veillard(a)redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/
| virtualization library http://libvirt.org/