From: Amey Inamdar
Sent: Monday, January 04, 2010 10:26 AM
To: Prafulla Wadaskar; Piyush Shah
Subject: FW: [fedora-arm] Sheevaplug and F12
FYI, if you've not seen.
> -----Original Message-----
> From: fedora-arm-bounces(a)redhat.com
> [mailto:email@example.com] On Behalf Of Quentin Armitage
> Sent: Sunday, January 03, 2010 6:20 AM
> To: fedora-arm(a)redhat.com
> Subject: Re: [fedora-arm] Sheevaplug and F12
> On Sat, 2010-01-02 at 11:08 +0000, Graeme Hilton wrote:
> > Hi,
> > I've got a Sheevaplug and I'm using a 4GB SD card to hold the OS.
> > PS My environment and uBoot version are attached below.
> > Marvell>> printenv
> > baudrate=115200
> > loads_echo=0
> > ipaddr=10.4.50.165
> > serverip=10.4.50.5
> > rootpath=/mnt/ARM_FS/
> > netmask=255.255.255.0
> > console=a0000
> > e=ttyS0,115200
> > CASset=min
> > MALLOC_len=1
> > U-Boot 1.1.4 (Sep 14 2009 - 15:36:37) Marvell version: 3.4.19
> > Marvell>>
> There is a bug in Sheevaplug uboot 3.4.19 which corrupts the
> (see console=a0000 and following line above).
> This is now fixed in 3.4.27, but two further issues have been
> found, and
> pingtoo has produced fixes -see
> that the best uboot is 3.4.27 as patched by pingtoo,
Dear Quentin Armitage
Can you please try latest mainlined u-boot for this problem?
Prafulla . .
> Beware though, and it applies not only to 3.4.27, but also
> 3.4.16 and probably earlier, that it appears there is a bug
> in the SDHC
> handling, and that uboot will not be able to handle offsets
> greater than
> 4Gb on the card; you should be safe with your 4Gb card of course.
> Quentin Armitage
> fedora-arm mailing list