Gitweb: http://git.fedorahosted.org/git/?p=gfs2-utils.git;a=commitdiff;h=8ed638b27a2... Commit: 8ed638b27a21dfa1776f55709592a453974c5d90 Parent: 982979702a7f23b069e31f171cc38fc4c87a018a Author: Andrew Price anprice@redhat.com AuthorDate: Thu May 30 12:12:08 2013 +0100 Committer: Andrew Price anprice@redhat.com CommitterDate: Thu May 30 12:22:23 2013 +0100

gfs2-utils: Remove some unused build files

This removes some build files which are either no longer used or are generated by autoconf and needn't have been committed.

Signed-off-by: Andrew Price anprice@redhat.com --- .gitignore | 7 + Makefile.am | 2 +- Makefile.new | 126 --------- README.build | 12 +- config.rpath | 672 ------------------------------------------------ po/Makefile.in.in | 444 -------------------------------- po/Rules-quot | 47 ---- po/boldquot.sed | 10 - po/insert-header.sin | 23 -- po/quot.sed | 6 - po/remove-potcdate.sin | 19 -- 11 files changed, 9 insertions(+), 1359 deletions(-)

diff --git a/.gitignore b/.gitignore index a1eadd0..f8f8a82 100644 --- a/.gitignore +++ b/.gitignore @@ -11,6 +11,7 @@ config.guess config.log config.sub config.status +config.rpath Makefile depcomp install-sh @@ -50,3 +51,9 @@ po/Makevars.template po/POTFILES po/stamp-po po/remove-potcdate.sed +po/Makefile.in.in +po/Rules-quot +po/boldquot.sed +po/insert-header.sin +po/quot.sed +po/remove-potcdate.sin diff --git a/Makefile.am b/Makefile.am index 210ab15..1eea44c 100644 --- a/Makefile.am +++ b/Makefile.am @@ -1,4 +1,4 @@ -EXTRA_DIST = config.rpath m4/ChangeLog autogen.sh +EXTRA_DIST = autogen.sh

AUTOMAKE_OPTIONS = foreign

diff --git a/Makefile.new b/Makefile.new deleted file mode 100644 index 1534c87..0000000 --- a/Makefile.new +++ /dev/null @@ -1,126 +0,0 @@ -# -# Makefile for gfs2-utils -# -.PHONY: all install clean test testprog testlib libraries programs strings -.SUFFIXES: .po .pot .d - -subdir = $(patsubst %/target.mk,%,$(word $(words $(MAKEFILE_LIST)), $(MAKEFILE_LIST))) - -# $(call make-binary, name, libs) -# -# This is used to make a binary from all the sources in a -# directory. The name should be that of the final installed -# binary. -# -define make-binary - $(eval local_bin = $(subdir)/$(notdir $(strip $1))) - $(eval local_src = $(wildcard $(subdir)/*.c)) - - programs += $(local_bin) - install += install-$(local_bin) - sources += $(local_src) - -$(local_bin): $2 $(subst .c,.o,$(local_src)) - $(LINK.c) $$^ $2 -o $$@ -install-$(local_bin): $(local_bin) - $(INSTALL) -m 0755 $(local_bin) $(strip $1) -endef - -# $(call make-trans-binary,name,libs) -# -# As above, but binary has translatable strings -# -define make-trans-binary - $(call make-binary,$1,$2) - posources += $(wildcard $(subdir)/*.c) -endef - -# $(call make-library, name) -# -# This is called to make a library from all the sources -# in a directory/ -# -define make-library - $(eval local_libs = $(subdir)/$(notdir $(strip $1))) - $(eval local_src = $(wildcard $(subdir)/*.c)) - $(eval local_objs = $(subst .c,.o,$(local_src))) - libraries += $(local_libs) - sources += $(local_src) - -$(local_libs): $(local_objs) - $(AR) $(ARFLAGS) $$@ $$^ -$(local_objs): %.o: %.c - $(COMPILE.c) -fPIC $$< -o $$@ -endef - - -CC=gcc -LD=gcc -AR=ar -SED=sed -MV=mv -GT=xgettext -INSTALL=install -CFLAGS=-O2 -Wall -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -fno-strict-aliasing -Werror -DVERSION="3.1.0" -LDFLAGS= -ARFLAGS=rcs - -# Programs -programs := -# Install -install := -# All source files -sources := -# All source files from which translatable strings are extracted -posources := -# All libraries -libraries := -# All man pages -manpages := - -# These are created automatically from the above -objects = $(subst .c,.o,$(sources)) -dependencies = $(subst .o,.d,$(objects)) - -# -# Need to trim down the list of include dirs to something more reasonable -# -include_dirs := gfs2/include gfs2/libgfs2 group/include group/libgfscontrol make group/gfs_controld -CFLAGS += $(addprefix -I ,$(include_dirs)) -vpath %.h $(include_dirs) - - -all: -include $(shell find . -mindepth 2 -type f -name target.mk -print) -all: $(programs) - -libraries: $(libraries) -programs: $(programs) -strings: po/gfs2-utils.pot -po/gfs2-utils.pot: $(posources) - $(GT) -k_ -o po/gfs2-utils.pot $^ -install: $(install) - -clean: - rm -f $(objects) $(programs) $(libraries) $(dependencies) - -test: progtest libtest -progtest: $(programs) -libtest: $(libraries) - -ifneq "$(MAKECMDGOALS)" "clean" --include $(dependencies) -endif - -%.po: %.pot - mv %< $(basename %<).pp - msgmerge -o %< ($basename %<).pp $(basename %<).pot - rm -f $(basename %<).pp - -%.d: %.c - $(CC) $(CFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -M $< | \ - $(SED) 's,($(nodir $*).o) *:,$(dir $@)\1 $@: ,' > $@.tmp - $(MV) $@.tmp $@ - -%: %.o - $(LINK.c) $(LDLIBS) $^ -o $@ diff --git a/README.build b/README.build index 7832e2b..1f73b1d 100644 --- a/README.build +++ b/README.build @@ -38,14 +38,4 @@ To install gfs2-utils, run:

make install

-There is also an alternative (experimental, but eventually will take over -from the current build system) build system which requires only GNU make. -To use that build system, simply run: - -make -f Makefile.new <target> - -Where <target> is all, install, etc. - -Both build systems are designed to run alongside each other for the time -being. - +See also README.contributing for details on submitting patches. diff --git a/config.rpath b/config.rpath deleted file mode 100755 index 17298f2..0000000 --- a/config.rpath +++ /dev/null @@ -1,672 +0,0 @@ -#! /bin/sh -# Output a system dependent set of variables, describing how to set the -# run time search path of shared libraries in an executable. -# -# Copyright 1996-2010 Free Software Foundation, Inc. -# Taken from GNU libtool, 2001 -# Originally by Gordon Matzigkeit gord@gnu.ai.mit.edu, 1996 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. -# -# The first argument passed to this file is the canonical host specification, -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld -# should be set by the caller. -# -# The set of defined variables is at the end of this script. - -# Known limitations: -# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer -# than 256 bytes, otherwise the compiler driver will dump core. The only -# known workaround is to choose shorter directory names for the build -# directory and/or the installation directory. - -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a -shrext=.so - -host="$1" -host_cpu=`echo "$host" | sed 's/^([^-]*)-([^-]*)-(.*)$/\1/'` -host_vendor=`echo "$host" | sed 's/^([^-]*)-([^-]*)-(.*)$/\2/'` -host_os=`echo "$host" | sed 's/^([^-]*)-([^-]*)-(.*)$/\3/'` - -# Code taken from libtool.m4's _LT_CC_BASENAME. - -for cc_temp in $CC""; do - case $cc_temp in - compile | *[\/]compile | ccache | *[\/]ccache ) ;; - distcc | *[\/]distcc | purify | *[\/]purify ) ;; - -*) ;; - *) break;; - esac -done -cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'` - -# Code taken from libtool.m4's _LT_COMPILER_PIC. - -wl= -if test "$GCC" = yes; then - wl='-Wl,' -else - case "$host_os" in - aix*) - wl='-Wl,' - ;; - darwin*) - case $cc_basename in - xlc*) - wl='-Wl,' - ;; - esac - ;; - mingw* | cygwin* | pw32* | os2* | cegcc*) - ;; - hpux9* | hpux10* | hpux11*) - wl='-Wl,' - ;; - irix5* | irix6* | nonstopux*) - wl='-Wl,' - ;; - newsos6) - ;; - linux* | k*bsd*-gnu) - case $cc_basename in - ecc*) - wl='-Wl,' - ;; - icc* | ifort*) - wl='-Wl,' - ;; - lf95*) - wl='-Wl,' - ;; - pgcc | pgf77 | pgf90) - wl='-Wl,' - ;; - ccc*) - wl='-Wl,' - ;; - como) - wl='-lopt=' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - wl='-Wl,' - ;; - esac - ;; - esac - ;; - osf3* | osf4* | osf5*) - wl='-Wl,' - ;; - rdos*) - ;; - solaris*) - wl='-Wl,' - ;; - sunos4*) - wl='-Qoption ld ' - ;; - sysv4 | sysv4.2uw2* | sysv4.3*) - wl='-Wl,' - ;; - sysv4*MP*) - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - wl='-Wl,' - ;; - unicos*) - wl='-Wl,' - ;; - uts4*) - ;; - esac -fi - -# Code taken from libtool.m4's _LT_LINKER_SHLIBS. - -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no - -case "$host_os" in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; -esac - -ld_shlibs=yes -if test "$with_gnu_ld" = yes; then - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - # Unlike libtool, we use -rpath here, not --rpath, since the documented - # option of GNU ld is called -rpath, not --rpath. - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - case "$host_os" in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs=no - fi - ;; - amigaos*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # Samuel A. Falvo II kc5tja@dolphin.openprojects.net reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we cannot use - # them. - ld_shlibs=no - ;; - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - cygwin* | mingw* | pw32* | cegcc*) - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - interix[3-9]*) - hardcode_direct=no - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - gnu* | linux* | k*bsd*-gnu) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - netbsd*) - ;; - solaris*) - if $LD -v 2>&1 | grep 'BFD 2.8' > /dev/null; then - ld_shlibs=no - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' - else - ld_shlibs=no - fi - ;; - esac - ;; - sunos4*) - hardcode_direct=yes - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - esac - if test "$ld_shlibs" = no; then - hardcode_libdir_flag_spec= - fi -else - case "$host_os" in - aix3*) - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - else - aix_use_runtimelinking=no - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - fi - hardcode_direct=yes - hardcode_libdir_separator=':' - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct=unsupported - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - fi - # Begin _LT_AC_SYS_LIBPATH_AIX. - echo 'int main () { return 0; }' > conftest.c - ${CC} ${LDFLAGS} conftest.c -o conftest - aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *(.*)$/\1/; p; } -}'` - if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *(.*)$/\1/; p; } -}'` - fi - if test -z "$aix_libpath"; then - aix_libpath="/usr/lib:/lib" - fi - rm -f conftest.c conftest - # End _LT_AC_SYS_LIBPATH_AIX. - if test "$aix_use_runtimelinking" = yes; then - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - else - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - fi - fi - ;; - amigaos*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no - ;; - bsdi[45]*) - ;; - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - libext=lib - ;; - darwin* | rhapsody*) - hardcode_direct=no - if test "$GCC" = yes ; then - : - else - case $cc_basename in - xlc*) - ;; - *) - ld_shlibs=no - ;; - esac - fi - ;; - dgux*) - hardcode_libdir_flag_spec='-L$libdir' - ;; - freebsd1*) - ld_shlibs=no - ;; - freebsd2.2*) - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - ;; - freebsd2*) - hardcode_direct=yes - hardcode_minus_L=yes - ;; - freebsd* | dragonfly*) - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - ;; - hpux9*) - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - hpux10*) - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi - ;; - hpux11*) - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct=no - ;; - *) - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - irix5* | irix6* | nonstopux*) - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - netbsd*) - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - ;; - newsos6) - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct=yes - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - else - case "$host_os" in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - else - ld_shlibs=no - fi - ;; - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - osf3*) - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - osf4* | osf5*) - if test "$GCC" = yes; then - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - # Both cc and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; - solaris*) - hardcode_libdir_flag_spec='-R$libdir' - ;; - sunos4*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - ;; - sysv4) - case $host_vendor in - sni) - hardcode_direct=yes # is this really true??? - ;; - siemens) - hardcode_direct=no - ;; - motorola) - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - ;; - sysv4.3*) - ;; - sysv4*MP*) - if test -d /usr/nec; then - ld_shlibs=yes - fi - ;; - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - ;; - sysv5* | sco3.2v5* | sco5v6*) - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - hardcode_libdir_separator=':' - ;; - uts4*) - hardcode_libdir_flag_spec='-L$libdir' - ;; - *) - ld_shlibs=no - ;; - esac -fi - -# Check dynamic linker characteristics -# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER. -# Unlike libtool.m4, here we don't care about _all_ names of the library, but -# only about the one the linker finds when passed -lNAME. This is the last -# element of library_names_spec in libtool.m4, or possibly two of them if the -# linker has special search rules. -library_names_spec= # the last element of library_names_spec in libtool.m4 -libname_spec='lib$name' -case "$host_os" in - aix3*) - library_names_spec='$libname.a' - ;; - aix[4-9]*) - library_names_spec='$libname$shrext' - ;; - amigaos*) - library_names_spec='$libname.a' - ;; - beos*) - library_names_spec='$libname$shrext' - ;; - bsdi[45]*) - library_names_spec='$libname$shrext' - ;; - cygwin* | mingw* | pw32* | cegcc*) - shrext=.dll - library_names_spec='$libname.dll.a $libname.lib' - ;; - darwin* | rhapsody*) - shrext=.dylib - library_names_spec='$libname$shrext' - ;; - dgux*) - library_names_spec='$libname$shrext' - ;; - freebsd1*) - ;; - freebsd* | dragonfly*) - case "$host_os" in - freebsd[123]*) - library_names_spec='$libname$shrext$versuffix' ;; - *) - library_names_spec='$libname$shrext' ;; - esac - ;; - gnu*) - library_names_spec='$libname$shrext' - ;; - hpux9* | hpux10* | hpux11*) - case $host_cpu in - ia64*) - shrext=.so - ;; - hppa*64*) - shrext=.sl - ;; - *) - shrext=.sl - ;; - esac - library_names_spec='$libname$shrext' - ;; - interix[3-9]*) - library_names_spec='$libname$shrext' - ;; - irix5* | irix6* | nonstopux*) - library_names_spec='$libname$shrext' - case "$host_os" in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; - *) libsuff= shlibsuff= ;; - esac - ;; - esac - ;; - linux*oldld* | linux*aout* | linux*coff*) - ;; - linux* | k*bsd*-gnu) - library_names_spec='$libname$shrext' - ;; - knetbsd*-gnu) - library_names_spec='$libname$shrext' - ;; - netbsd*) - library_names_spec='$libname$shrext' - ;; - newsos6) - library_names_spec='$libname$shrext' - ;; - nto-qnx*) - library_names_spec='$libname$shrext' - ;; - openbsd*) - library_names_spec='$libname$shrext$versuffix' - ;; - os2*) - libname_spec='$name' - shrext=.dll - library_names_spec='$libname.a' - ;; - osf3* | osf4* | osf5*) - library_names_spec='$libname$shrext' - ;; - rdos*) - ;; - solaris*) - library_names_spec='$libname$shrext' - ;; - sunos4*) - library_names_spec='$libname$shrext$versuffix' - ;; - sysv4 | sysv4.3*) - library_names_spec='$libname$shrext' - ;; - sysv4*MP*) - library_names_spec='$libname$shrext' - ;; - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - library_names_spec='$libname$shrext' - ;; - uts4*) - library_names_spec='$libname$shrext' - ;; -esac - -sed_quote_subst='s/(["`$\])/\\1/g' -escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` -shlibext=`echo "$shrext" | sed -e 's,^.,,'` -escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` -escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` -escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` - -LC_ALL=C sed -e 's/^([a-zA-Z0-9_]*)=/acl_cv_\1=/' <<EOF - -# How to pass a linker flag through the compiler. -wl="$escaped_wl" - -# Static library suffix (normally "a"). -libext="$libext" - -# Shared library suffix (normally "so"). -shlibext="$shlibext" - -# Format of library name prefix. -libname_spec="$escaped_libname_spec" - -# Library names that the linker finds when passed -lNAME. -library_names_spec="$escaped_library_names_spec" - -# Flag to hardcode $libdir into a binary during linking. -# This must work even if $libdir does not exist. -hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec" - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator="$hardcode_libdir_separator" - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct="$hardcode_direct" - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L="$hardcode_minus_L" - -EOF diff --git a/po/Makefile.in.in b/po/Makefile.in.in deleted file mode 100644 index 83d8838..0000000 --- a/po/Makefile.in.in +++ /dev/null @@ -1,444 +0,0 @@ -# Makefile for PO directory in any package using GNU gettext. -# Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper drepper@gnu.ai.mit.edu -# -# This file can be copied and used freely without restrictions. It can -# be used in projects which are not available under the GNU General Public -# License but which still want to provide support for the GNU gettext -# functionality. -# Please note that the actual code of GNU gettext is covered by the GNU -# General Public License and is *not* in the public domain. -# -# Origin: gettext-0.18 -GETTEXT_MACRO_VERSION = 0.18 - -PACKAGE = @PACKAGE@ -VERSION = @VERSION@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ - -SHELL = /bin/sh -@SET_MAKE@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ - -prefix = @prefix@ -exec_prefix = @exec_prefix@ -datarootdir = @datarootdir@ -datadir = @datadir@ -localedir = @localedir@ -gettextsrcdir = $(datadir)/gettext/po - -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ - -# We use $(mkdir_p). -# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as -# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions, -# @install_sh@ does not start with $(SHELL), so we add it. -# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined -# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake -# versions, $(mkinstalldirs) and $(install_sh) are unused. -mkinstalldirs = $(SHELL) @install_sh@ -d -install_sh = $(SHELL) @install_sh@ -MKDIR_P = @MKDIR_P@ -mkdir_p = @mkdir_p@ - -GMSGFMT_ = @GMSGFMT@ -GMSGFMT_no = @GMSGFMT@ -GMSGFMT_yes = @GMSGFMT_015@ -GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT)) -MSGFMT_ = @MSGFMT@ -MSGFMT_no = @MSGFMT@ -MSGFMT_yes = @MSGFMT_015@ -MSGFMT = $(MSGFMT_$(USE_MSGCTXT)) -XGETTEXT_ = @XGETTEXT@ -XGETTEXT_no = @XGETTEXT@ -XGETTEXT_yes = @XGETTEXT_015@ -XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT)) -MSGMERGE = msgmerge -MSGMERGE_UPDATE = @MSGMERGE@ --update -MSGINIT = msginit -MSGCONV = msgconv -MSGFILTER = msgfilter - -POFILES = @POFILES@ -GMOFILES = @GMOFILES@ -UPDATEPOFILES = @UPDATEPOFILES@ -DUMMYPOFILES = @DUMMYPOFILES@ -DISTFILES.common = Makefile.in.in remove-potcdate.sin \ -$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3) -DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \ -$(POFILES) $(GMOFILES) \ -$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3) - -POTFILES = \ - -CATALOGS = @CATALOGS@ - -# Makevars gets inserted here. (Don't remove this line!) - -.SUFFIXES: -.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update - -.po.mo: - @echo "$(MSGFMT) -c -o $@ $<"; \ - $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@ - -.po.gmo: - @lang=`echo $* | sed -e 's,.*/,,'`; \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \ - cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo - -.sin.sed: - sed -e '/^#/d' $< > t-$@ - mv t-$@ $@ - - -all: check-macro-version all-@USE_NLS@ - -all-yes: stamp-po -all-no: - -# Ensure that the gettext macros and this Makefile.in.in are in sync. -check-macro-version: - @test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \ - || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \ - exit 1; \ - } - -# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no -# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because -# we don't want to bother translators with empty POT files). We assume that -# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty. -# In this case, stamp-po is a nop (i.e. a phony target). - -# stamp-po is a timestamp denoting the last time at which the CATALOGS have -# been loosely updated. Its purpose is that when a developer or translator -# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS, -# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent -# invocations of "make" will do nothing. This timestamp would not be necessary -# if updating the $(CATALOGS) would always touch them; however, the rule for -# $(POFILES) has been designed to not touch files that don't need to be -# changed. -stamp-po: $(srcdir)/$(DOMAIN).pot - test ! -f $(srcdir)/$(DOMAIN).pot || \ - test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES) - @test ! -f $(srcdir)/$(DOMAIN).pot || { \ - echo "touch stamp-po" && \ - echo timestamp > stamp-poT && \ - mv stamp-poT stamp-po; \ - } - -# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update', -# otherwise packages like GCC can not be built if only parts of the source -# have been downloaded. - -# This target rebuilds $(DOMAIN).pot; it is an expensive operation. -# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed. -$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed - if LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null | grep -v 'libtool:' >/dev/null; then \ - package_gnu='GNU '; \ - else \ - package_gnu=''; \ - fi; \ - if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \ - msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \ - else \ - msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \ - fi; \ - case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \ - $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ - --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ - --files-from=$(srcdir)/POTFILES.in \ - --copyright-holder='$(COPYRIGHT_HOLDER)' \ - --msgid-bugs-address="$$msgid_bugs_address" \ - ;; \ - *) \ - $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ - --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ - --files-from=$(srcdir)/POTFILES.in \ - --copyright-holder='$(COPYRIGHT_HOLDER)' \ - --package-name="$${package_gnu}@PACKAGE@" \ - --package-version='@VERSION@' \ - --msgid-bugs-address="$$msgid_bugs_address" \ - ;; \ - esac - test ! -f $(DOMAIN).po || { \ - if test -f $(srcdir)/$(DOMAIN).pot; then \ - sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \ - sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \ - if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \ - rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \ - else \ - rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \ - mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ - fi; \ - else \ - mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ - fi; \ - } - -# This rule has no dependencies: we don't need to update $(DOMAIN).pot at -# every "make" invocation, only create it when it is missing. -# Only "make $(DOMAIN).pot-update" or "make dist" will force an update. -$(srcdir)/$(DOMAIN).pot: - $(MAKE) $(DOMAIN).pot-update - -# This target rebuilds a PO file if $(DOMAIN).pot has changed. -# Note that a PO file is not touched if it doesn't need to be changed. -$(POFILES): $(srcdir)/$(DOMAIN).pot - @lang=`echo $@ | sed -e 's,.*/,,' -e 's/.po$$//'`; \ - if test -f "$(srcdir)/$${lang}.po"; then \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \ - cd $(srcdir) \ - && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \ - $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \ - *) \ - $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \ - esac; \ - }; \ - else \ - $(MAKE) $${lang}.po-create; \ - fi - - -install: install-exec install-data -install-exec: -install-data: install-data-@USE_NLS@ - if test "$(PACKAGE)" = "gettext-tools"; then \ - $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ - for file in $(DISTFILES.common) Makevars.template; do \ - $(INSTALL_DATA) $(srcdir)/$$file \ - $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - for file in Makevars; do \ - rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - else \ - : ; \ - fi -install-data-no: all -install-data-yes: all - @catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/.gmo$$//'`; \ - dir=$(localedir)/$$lang/LC_MESSAGES; \ - $(mkdir_p) $(DESTDIR)$$dir; \ - if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \ - $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \ - echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \ - for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ - if test -n "$$lc"; then \ - if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ - link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ - mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ - for file in *; do \ - if test -f $$file; then \ - ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ - fi; \ - done); \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - else \ - if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ - :; \ - else \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - fi; \ - fi; \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ - ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ - cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \ - fi; \ - done; \ - done - -install-strip: install - -installdirs: installdirs-exec installdirs-data -installdirs-exec: -installdirs-data: installdirs-data-@USE_NLS@ - if test "$(PACKAGE)" = "gettext-tools"; then \ - $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ - else \ - : ; \ - fi -installdirs-data-no: -installdirs-data-yes: - @catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/.gmo$$//'`; \ - dir=$(localedir)/$$lang/LC_MESSAGES; \ - $(mkdir_p) $(DESTDIR)$$dir; \ - for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ - if test -n "$$lc"; then \ - if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ - link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ - mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ - for file in *; do \ - if test -f $$file; then \ - ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ - fi; \ - done); \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - else \ - if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ - :; \ - else \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - fi; \ - fi; \ - fi; \ - done; \ - done - -# Define this as empty until I found a useful application. -installcheck: - -uninstall: uninstall-exec uninstall-data -uninstall-exec: -uninstall-data: uninstall-data-@USE_NLS@ - if test "$(PACKAGE)" = "gettext-tools"; then \ - for file in $(DISTFILES.common) Makevars.template; do \ - rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - else \ - : ; \ - fi -uninstall-data-no: -uninstall-data-yes: - catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/.gmo$$//'`; \ - for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - done; \ - done - -check: all - -info dvi ps pdf html tags TAGS ctags CTAGS ID: - -mostlyclean: - rm -f remove-potcdate.sed - rm -f stamp-poT - rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po - rm -fr *.o - -clean: mostlyclean - -distclean: clean - rm -f Makefile Makefile.in POTFILES *.mo - -maintainer-clean: distclean - @echo "This command is intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." - rm -f stamp-po $(GMOFILES) - -distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) -dist distdir: - $(MAKE) update-po - @$(MAKE) dist2 -# This is a separate target because 'update-po' must be executed before. -dist2: stamp-po $(DISTFILES) - dists="$(DISTFILES)"; \ - if test "$(PACKAGE)" = "gettext-tools"; then \ - dists="$$dists Makevars.template"; \ - fi; \ - if test -f $(srcdir)/$(DOMAIN).pot; then \ - dists="$$dists $(DOMAIN).pot stamp-po"; \ - fi; \ - if test -f $(srcdir)/ChangeLog; then \ - dists="$$dists ChangeLog"; \ - fi; \ - for i in 0 1 2 3 4 5 6 7 8 9; do \ - if test -f $(srcdir)/ChangeLog.$$i; then \ - dists="$$dists ChangeLog.$$i"; \ - fi; \ - done; \ - if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \ - for file in $$dists; do \ - if test -f $$file; then \ - cp -p $$file $(distdir) || exit 1; \ - else \ - cp -p $(srcdir)/$$file $(distdir) || exit 1; \ - fi; \ - done - -update-po: Makefile - $(MAKE) $(DOMAIN).pot-update - test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES) - $(MAKE) update-gmo - -# General rule for creating PO files. - -.nop.po-create: - @lang=`echo $@ | sed -e 's/.po-create$$//'`; \ - echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \ - exit 1 - -# General rule for updating PO files. - -.nop.po-update: - @lang=`echo $@ | sed -e 's/.po-update$$//'`; \ - if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \ - tmpdir=`pwd`; \ - echo "$$lang:"; \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \ - cd $(srcdir); \ - if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \ - $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ - *) \ - $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ - esac; \ - }; then \ - if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ - rm -f $$tmpdir/$$lang.new.po; \ - else \ - if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ - :; \ - else \ - echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ - exit 1; \ - fi; \ - fi; \ - else \ - echo "msgmerge for $$lang.po failed!" 1>&2; \ - rm -f $$tmpdir/$$lang.new.po; \ - fi - -$(DUMMYPOFILES): - -update-gmo: Makefile $(GMOFILES) - @: - -# Recreate Makefile by invoking config.status. Explicitly invoke the shell, -# because execution permission bits may not work on the current file system. -# Use @SHELL@, which is the shell determined by autoconf for the use by its -# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient. -Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@ - cd $(top_builddir) \ - && @SHELL@ ./config.status $(subdir)/$@.in po-directories - -force: - -# Tell versions [3.59,3.63) of GNU make not to export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/po/Rules-quot b/po/Rules-quot deleted file mode 100644 index af52487..0000000 --- a/po/Rules-quot +++ /dev/null @@ -1,47 +0,0 @@ -# Special Makefile rules for English message catalogs with quotation marks. - -DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot - -.SUFFIXES: .insert-header .po-update-en - -en@quot.po-create: - $(MAKE) en@quot.po-update -en@boldquot.po-create: - $(MAKE) en@boldquot.po-update - -en@quot.po-update: en@quot.po-update-en -en@boldquot.po-update: en@boldquot.po-update-en - -.insert-header.po-update-en: - @lang=`echo $@ | sed -e 's/.po-update-en$$//'`; \ - if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \ - tmpdir=`pwd`; \ - echo "$$lang:"; \ - ll=`echo $$lang | sed -e 's/@.*//'`; \ - LC_ALL=C; export LC_ALL; \ - cd $(srcdir); \ - if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \ - if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ - rm -f $$tmpdir/$$lang.new.po; \ - else \ - if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ - :; \ - else \ - echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ - exit 1; \ - fi; \ - fi; \ - else \ - echo "creation of $$lang.po failed!" 1>&2; \ - rm -f $$tmpdir/$$lang.new.po; \ - fi - -en@quot.insert-header: insert-header.sin - sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header - -en@boldquot.insert-header: insert-header.sin - sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header - -mostlyclean: mostlyclean-quot -mostlyclean-quot: - rm -f *.insert-header diff --git a/po/boldquot.sed b/po/boldquot.sed deleted file mode 100644 index 4b937aa..0000000 --- a/po/boldquot.sed +++ /dev/null @@ -1,10 +0,0 @@ -s/"([^"]*)"/“\1”/g -s/`([^`']*)'/‘\1’/g -s/ '([^`']*)' / ‘\1’ /g -s/ '([^`']*)'$/ ‘\1’/g -s/^'([^`']*)' /‘\1’ /g -s/“”/""/g -s/“/“/g -s/”/”/g -s/‘/‘/g -s/’/’/g diff --git a/po/insert-header.sin b/po/insert-header.sin deleted file mode 100644 index b26de01..0000000 --- a/po/insert-header.sin +++ /dev/null @@ -1,23 +0,0 @@ -# Sed script that inserts the file called HEADER before the header entry. -# -# At each occurrence of a line starting with "msgid ", we execute the following -# commands. At the first occurrence, insert the file. At the following -# occurrences, do nothing. The distinction between the first and the following -# occurrences is achieved by looking at the hold space. -/^msgid /{ -x -# Test if the hold space is empty. -s/m/m/ -ta -# Yes it was empty. First occurrence. Read the file. -r HEADER -# Output the file's contents by reading the next line. But don't lose the -# current line while doing this. -g -N -bb -:a -# The hold space was nonempty. Following occurrences. Do nothing. -x -:b -} diff --git a/po/quot.sed b/po/quot.sed deleted file mode 100644 index 0122c46..0000000 --- a/po/quot.sed +++ /dev/null @@ -1,6 +0,0 @@ -s/"([^"]*)"/“\1”/g -s/`([^`']*)'/‘\1’/g -s/ '([^`']*)' / ‘\1’ /g -s/ '([^`']*)'$/ ‘\1’/g -s/^'([^`']*)' /‘\1’ /g -s/“”/""/g diff --git a/po/remove-potcdate.sin b/po/remove-potcdate.sin deleted file mode 100644 index 2436c49..0000000 --- a/po/remove-potcdate.sin +++ /dev/null @@ -1,19 +0,0 @@ -# Sed script that remove the POT-Creation-Date line in the header entry -# from a POT file. -# -# The distinction between the first and the following occurrences of the -# pattern is achieved by looking at the hold space. -/^"POT-Creation-Date: .*"$/{ -x -# Test if the hold space is empty. -s/P/P/ -ta -# Yes it was empty. First occurrence. Remove the line. -g -d -bb -:a -# The hold space was nonempty. Following occurrences. Do nothing. -x -:b -}