I am trying to install after an uninstall the freeipa-server package on Debian, which is now failing. I normally removed all packages and config files, something seems to still cause issues. The installation output is as follows, after running apt install freeipa-server (I^m first extracting main warning and failure lines I identified).
————— Warning: found usr.sbin.sssd in /etc/apparmor.d/force-complain, forcing complain mode Warning failed to create cache: usr.sbin.sssd ————— Failed to preset unit: Unit file /etc/systemd/system/bind9.service is masked. /usr/bin/deb-systemd-helper: error: systemctl preset failed on bind9.service: No such file or directory ————— ob for krb5-kdc.service failed because the control process exited with error code. See "systemctl status krb5-kdc.service" and "journalctl -xe" for details. invoke-rc.d: initscript krb5-kdc, action "start" failed. ● krb5-kdc.service - Kerberos 5 Key Distribution Center Loaded: loaded (/lib/systemd/system/krb5-kdc.service; enabled; vendor preset: enabled) Drop-In: /lib/systemd/system/krb5-kdc.service.d └─slapd-before-kdc.conf Active: failed (Result: exit-code) since Mon 2018-10-15 14:24:00 CEST; 16ms ago Process: 17099 ExecStart=/usr/sbin/krb5kdc -P /var/run/krb5-kdc.pid $DAEMON_ARGS (code=exited, status=1/FAILURE)
Oct 15 14:24:00 freeipa.mdpi.com systemd[1]: Starting Kerberos 5 Key Distribution Center... Oct 15 14:24:00 freeipa.mdpi.com krb5kdc[17099]: Couldn't open log file /var/log/krb5kdc.log: Read-only file system Oct 15 14:24:00 freeipa.mdpi.com krb5kdc[17099]: Server error - while fetching master key K/M for realm IPA.MDPI.COM Oct 15 14:24:00 freeipa.mdpi.com krb5kdc[17099]: krb5kdc: cannot initialize realm IPA.MDPI.COM - see log file for details Oct 15 14:24:00 freeipa.mdpi.com systemd[1]: krb5-kdc.service: Control process exited, code=exited status=1 Oct 15 14:24:00 freeipa.mdpi.com systemd[1]: krb5-kdc.service: Failed with result 'exit-code'. Oct 15 14:24:00 freeipa.mdpi.com systemd[1]: Failed to start Kerberos 5 Key Distribution Center. ————— pki-tomcatd-nuxwdog.target is a disabled or a static unit, not starting it. Job for pki-tomcatd.service failed because the control process exited with error code. See "systemctl status pki-tomcatd.service" and "journalctl -xe" for details. invoke-rc.d: initscript pki-tomcatd, action "start" failed. ● pki-tomcatd.service - LSB: Start pki-tomcatd at boot time Loaded: loaded (/etc/init.d/pki-tomcatd; generated) Active: failed (Result: exit-code) since Mon 2018-10-15 14:24:03 CEST; 17ms ago Docs: man:systemd-sysv-generator(8) Process: 17421 ExecStart=/etc/init.d/pki-tomcatd start (code=exited, status=1/FAILURE)
Oct 15 14:24:03 freeipa.mdpi.com systemd[1]: Starting LSB: Start pki-tomcatd at boot time... Oct 15 14:24:03 freeipa.mdpi.com pki-tomcatd[17421]: /usr/share/pki/scripts/config: line 41: break: only meaningful in a `for', `while', or `until' loop Oct 15 14:24:03 freeipa.mdpi.com pki-tomcatd[17421]: ERROR: No 'tomcat' instances installed! Oct 15 14:24:03 freeipa.mdpi.com systemd[1]: pki-tomcatd.service: Control process exited, code=exited status=1 Oct 15 14:24:03 freeipa.mdpi.com systemd[1]: pki-tomcatd.service: Failed with result 'exit-code'. Oct 15 14:24:03 freeipa.mdpi.com systemd[1]: Failed to start LSB: Start pki-tomcatd at boot time. ————— Setting up freeipa-server (4.7.0~pre1+git20180411-2ubuntu2) ... dpkg: error processing package freeipa-server (--configure): installed freeipa-server package post-installation script subprocess returned error exit status 1 dpkg: dependency problems prevent configuration of freeipa-server-dns: freeipa-server-dns depends on freeipa-server (>= 4.7.0~pre1+git20180411-2ubuntu2); however: Package freeipa-server is not configured yet.
dpkg: error processing package freeipa-server-dns (--configure): dependency problems - leaving unconfigured Processing triggers for libc-bin (2.27-3ubuntu1) ... Processing triggers for dbus (1.12.2-1ubuntu1) ... No apport report written because the error message indicates its a followup error from a previous failure. Processing triggers for oddjob (0.34.3-4) ... Errors were encountered while processing: freeipa-server freeipa-server-dns E: Sub-process /usr/bin/dpkg returned an error code (1) —————
FULL OUTPUT: Setting up libsymkey-jni (10.6.0-1ubuntu2) ... Setting up python-dnspython (1.15.0-1) ... Setting up libxcb-present0:amd64 (1.13-1) ... Setting up libslf4j-java (1.7.25-3) ... Setting up libglvnd0:amd64 (1.0.0-2ubuntu2.2) ... Setting up oddjob (0.34.3-4) ... Setting up libxinerama1:amd64 (2:1.1.3-1) ... Setting up libplexus-classworlds-java (2.5.2-2) ... Processing triggers for ufw (0.35-5) ... Setting up libxcb-dri2-0:amd64 (1.13-1) ... Setting up libsss-idmap0 (1.16.1-1ubuntu1) ... Setting up libhttp-parser2.7.1:amd64 (2.7.1-2) ... Setting up libxcb-dri3-0:amd64 (1.13-1) ... Setting up libxcb-glx0:amd64 (1.13-1) ... Setting up libcommons-io-java (2.6-2) ... Setting up libstax-java (1.2.0-4) ... Setting up libargs4j-java (2.33-1) ... Setting up python-urllib3 (1.22-1) ... Setting up libapache2-mod-lookup-identity (1.0.0-1) ... apache2_invoke: Enable module lookup_identity Setting up libpath-utils1:amd64 (0.6.1-1) ... Setting up libjettison-java (1.4.0-1) ... Setting up libsocket-getaddrinfo-perl (0.22-3) ... Setting up libknopflerfish-osgi-framework-java (6.1.1-2) ... Setting up libperl4-corelibs-perl (0.004-1) ... Setting up libsss-nss-idmap0 (1.16.1-1ubuntu1) ... Setting up libnfsidmap2:amd64 (0.25-5.1) ... Setting up python-usb (1.0.0-1) ... Setting up libxdamage1:amd64 (1:1.1.4-3) ... Setting up libhawtjni-runtime-java (1.15-2) ... Setting up libhttpcore-java (4.4.9-1) ... Setting up libjackson2-core-java (2.9.4-1) ... Setting up ieee-data (20180204.1) ... Setting up libjsr311-api-java (1.1.1-1) ... Setting up python-yubico (1.3.2-1) ... Setting up libyaml-snake-java (1.20-1) ... Setting up libxfixes3:amd64 (1:5.0.3-1) ... Setting up oddjob-mkhomedir (0.34.3-4) ... Processing triggers for ureadahead (0.100.0-20) ... Setting up libdrm-amdgpu1:amd64 (2.4.91-2) ... Setting up libllvm6.0:amd64 (1:6.0-1ubuntu2) ... Setting up chrony (3.2-4ubuntu4.2) ... Setting up libisorelax-java (20041111-10) ... Setting up python-openssl (17.5.0-1ubuntu1) ... Setting up libplexus-cipher-java (1.7-3) ... Setting up python-ply (3.11-1) ... Setting up python-kdcproxy (0.3.2-5) ... Setting up python-netaddr (0.7.19-1) ... Setting up python-jwcrypto (0.4.2-1) ... Setting up libatspi2.0-0:amd64 (2.28.0-1) ... Setting up libdtd-parser-java (1.2~svn20110404-1) ... Setting up libsvrcore0:amd64 (1:4.1.2+dfsg1-3) ... Setting up at-spi2-core (2.28.0-1) ... Setting up libsss-certmap0 (1.16.1-1ubuntu1) ... Setting up libxshmfence1:amd64 (1.3-1) ... Setting up libjaxb-api-java (2.2.9-1) ... Setting up krb5-pkinit:amd64 (1.16-2build1) ... Setting up libstax2-api-java (3.1.1-1) ... Setting up python-certifi (2018.1.18-2) ... Setting up libstax-ex-java (1.7.8-1) ... Setting up libipa-hbac0 (1.16.1-1ubuntu1) ... Setting up dogtag-pki-server-theme (10.6.0-1ubuntu2) ... Setting up libplexus-interpolation-java (1.24-1) ... Setting up libnl-route-3-200:amd64 (3.2.29-0ubuntu3) ... Setting up libglapi-mesa:amd64 (18.0.5-0ubuntu0~18.04.1) ... Setting up fonts-open-sans (1.11-1) ... Setting up python-sss (1.16.1-1ubuntu1) ... Setting up libplexus-component-annotations-java (1.7.1-7) ... Setting up python-pkg-resources (39.0.1-2) ... Setting up freeipa-common (4.7.0~pre1+git20180411-2ubuntu2) ... Setting up opendnssec-common (1:2.1.3-0.2build1) ... Setting up libmaven-shared-utils-java (3.1.0-2) ... Setting up python-pyasn1-modules (0.2.1-0.2) ... Setting up libdhash1:amd64 (0.6.1-1) ... Setting up python-nss (1.0.0-1build3) ... Setting up python-markupsafe (1.0-1build1) ... Setting up fonts-font-awesome (4.7.0~dfsg-3) ... Setting up python-netifaces (0.10.4-0.1build4) ... Setting up libjackson2-annotations-java (2.9.4-1) ... Setting up libldns2:amd64 (1.7.0-3ubuntu4) ... Setting up sqlite3 (3.22.0-1) ... Setting up libjoda-time-java (2.9.9-1) ... Setting up libplexus-utils2-java (3.0.24-3) ... Setting up libjackson2-dataformat-cbor (2.7.8-3) ... Setting up libcollection4:amd64 (0.6.1-1) ... Setting up libwagon-provider-api-java (3.0.0-2) ... Setting up libxcb-sync1:amd64 (1.13-1) ... Setting up libjsr305-java (0.1~+svn49-10) ... Setting up python-dateutil (2.6.1-1) ... Setting up ldap-utils (2.4.45+dfsg-1ubuntu1) ... Setting up libatk1.0-data (2.28.1-1) ... Setting up libjackson2-databind-java (2.9.5-1) ... Setting up libjackson2-dataformat-yaml (2.8.10-3) ... Setting up libx11-xcb1:amd64 (2:1.6.4-3ubuntu0.1) ... Setting up libnetaddr-ip-perl (4.079+dfsg-1build2) ... Setting up python-gi (3.26.1-2) ... Setting up libmozilla-ldap-perl (1.5.3-2build4) ... Setting up libservlet3.1-java (8.5.30-1ubuntu1.4) ... Setting up libjboss-jdeparser2-java (2.0.2-1) ... Setting up libjavassist-java (1:3.21.0-2) ... Setting up p11-kit-modules:amd64 (0.23.9-2) ... Setting up libnss-sss:amd64 (1.16.1-1ubuntu1) ... Setting up softhsm2-common (2.2.0-3.1build1) ... Setting up libhsm-bin (1:2.1.3-0.2build1) ... Setting up python3-sss (1.16.1-1ubuntu1) ... Setting up libjackson2-module-jaxb-annotations-java (2.8.10-2) ... Setting up libxmlrpc-core-c3 (1.33.14-8build1) ... Setting up libxxf86dga1:amd64 (2:1.1.4-1) ... Processing triggers for libc-bin (2.27-3ubuntu1) ... Setting up libjackson-json-java (1.9.2-9) ... Setting up python-bs4 (4.6.0-1) ... Setting up python-selinux (2.7-2build2) ... Setting up libgeronimo-interceptor-3.0-spec-java (1.0.1-4fakesync) ... Setting up libmaven-resolver-java (1.1.0-3) ... Setting up libsocket6-perl (0.27-1build2) ... Setting up libnsspem:amd64 (1.0.3-0ubuntu2) ... Setting up 389-ds-base-libs (1.3.7.10-1ubuntu1) ... Setting up libplexus-utils-java (1:1.5.15-5) ... Setting up libnss3-tools (2:3.35-2ubuntu2) ... Setting up python-libipa-hbac (1.16.1-1ubuntu1) ... Setting up libnuxwdog0 (1.0.3-4) ... Setting up libjackson2-dataformat-xml-java (2.9.4-1) ... Setting up libcommons-compress-java (1.13-2) ... Setting up libatk1.0-0:amd64 (2.28.1-1) ... Setting up libcommons-lang3-java (3.5-2ubuntu1) ... Setting up libjaxen-java (1.1.6-3) ... Setting up libwebpmux3:amd64 (0.6.1-2) ... Setting up libsnappy1v5:amd64 (1.1.7-1) ... Setting up libjansi-native-java (1.7-1) ... Setting up python-systemd (234-1build1) ... Processing triggers for systemd (237-3ubuntu10.3) ... Setting up libpwquality-common (1.4.0-2) ... Setting up augeas-lenses (1.10.1-2) ... Setting up python-lxml:amd64 (4.2.1-1) ... Setting up libatk-bridge2.0-0:amd64 (2.26.2-1) ... Setting up libjaxrs-api-java (2.1-1) ... Setting up libice6:amd64 (2:1.0.9-2) ... Setting up libasm-java (6.0-1) ... Setting up libfontenc1:amd64 (1:1.1.3-1) ... Setting up libxcomposite1:amd64 (1:0.4.4-2) ... Setting up libcrack2:amd64 (2.9.2-5build1) ... Setting up python-olefile (0.45.1-1) ... Setting up libwebpdemux2:amd64 (0.6.1-2) ... Setting up libxcb-shape0:amd64 (1.13-1) ... Setting up libpciaccess0:amd64 (0.14-1) ... Setting up libstreambuffer-java (1.5.4-1) ... Setting up libxv1:amd64 (2:1.0.11-1) ... Processing triggers for man-db (2.8.3-2) ... Setting up libatinject-jsr330-api-java (1.0+ds1-5) ... Setting up libjboss-logging-tools-java (2.1.0-2) ... Setting up libbasicobjects0:amd64 (0.6.1-1) ... Setting up libmaven-parent-java (27-2) ... Setting up python3-ply (3.11-1) ... Setting up libdrm-radeon1:amd64 (2.4.91-2) ... Setting up libref-array1:amd64 (0.6.1-1) ... Processing triggers for dbus (1.12.2-1ubuntu1) ... Setting up libxxf86vm1:amd64 (1:1.1.4-1) ... Setting up libdrm-nouveau2:amd64 (2.4.91-2) ... Setting up libxft2:amd64 (2.3.2-1) ... Setting up python-dbus (1.2.6-1) ... Setting up libcommons-codec-java (1.11-1) ... Setting up libjss-java (4.4.3-1) ... Setting up libjackson2-dataformat-smile (2.7.8-3) ... Setting up slapi-nis (0.56.1-1build1) ... Setting up libcommons-lang-java (2.6-8) ... Setting up libcurl3-nss:amd64 (7.58.0-2ubuntu3.3) ... Setting up python-pil:amd64 (5.1.0-1) ... Setting up libcommons-httpclient-java (3.1-14) ... Setting up libaopalliance-java (20070526-6) ... Setting up libc-ares2:amd64 (1.14.0-1) ... Setting up libjs-dojo-core (1.11.0+dfsg-1) ... Setting up python-webencodings (0.5-2) ... Setting up libgeronimo-annotation-1.3-spec-java (1.0-1) ... Setting up libdbi-perl (1.640-1) ... Setting up libjboss-logging-java (3.3.2-1) ... Setting up libsss-sudo (1.16.1-1ubuntu1) ... Checking NSS setup... Setting up libxrandr2:amd64 (2:1.5.1-1) ... Setting up librelaxng-datatype-java (1.0+ds1-3) ... Setting up libcommons-cli-java (1.4-1) ... Setting up libini-config5:amd64 (0.6.1-1) ... Setting up libplexus-sec-dispatcher-java (1.4-3) ... Setting up sssd-common (1.16.1-1ubuntu1) ... Warning: found usr.sbin.sssd in /etc/apparmor.d/force-complain, forcing complain mode Warning failed to create cache: usr.sbin.sssd sssd-secrets.service is a disabled or a static unit not running, not starting it. Setting up python-ldap (3.0.0-1) ... Setting up 389-ds-base (1.3.7.10-1ubuntu1) ... dirsrv-snmp.service is a disabled or a static unit, not starting it. dirsrv.target is a disabled or a static unit, not starting it. Setting up bind9utils (1:9.11.3+dfsg-1ubuntu1.2) ... Setting up libdom4j-java (2.1.0-2) ... Setting up python-setuptools (39.0.1-2) ... Setting up libsm6:amd64 (2:1.2.2-1) ... Setting up libplexus-io-java (3.0.0-1) ... Setting up libscannotation-java (1.0.2+svn20110812-3) ... Setting up libsymkey-java (10.6.0-1ubuntu2) ... Setting up python-libsss-nss-idmap (1.16.1-1ubuntu1) ... Setting up sssd-krb5-common (1.16.1-1ubuntu1) ... Setting up python-chardet (3.0.4-1) ... Setting up libdbd-sqlite3-perl (1.56-1) ... Setting up python-pycparser (2.18-2) ... Setting up libnuxwdog-java (1.0.3-4) ... Setting up libjs-dojo-dijit (1.11.0+dfsg-1) ... Setting up libsofthsm2 (2.2.0-3.1build1) ... Setting up libcglib-java (3.2.6-2) ... Setting up opendnssec-signer (1:2.1.3-0.2build1) ... Setting up python-jinja2 (2.10-1) ... Setting up libtomcatjss-java (7.3.0~rc-1) ... Setting up cracklib-runtime (2.9.2-5build1) ... Setting up libjs-dojo-dojox (1.11.0+dfsg-1) ... Setting up libsnappy-jni (1.1.4-1) ... Setting up libldap-java (4.19+dfsg1-1) ... Setting up libjansi-java (1.16-1) ... Setting up p11-kit (0.23.9-2) ... Setting up libaugeas0:amd64 (1.10.1-2) ... Setting up libxsom-java (2.3.0-3) ... Setting up bind9 (1:9.11.3+dfsg-1ubuntu1.2) ... Failed to preset unit: Unit file /etc/systemd/system/bind9.service is masked. /usr/bin/deb-systemd-helper: error: systemctl preset failed on bind9.service: No such file or directory bind9-pkcs11.service is a disabled or a static unit not running, not starting it. bind9-resolvconf.service is a disabled or a static unit not running, not starting it. Setting up libguava-java (19.0-1) ... Setting up python-qrcode (5.3-1) ... update-alternatives: using /usr/bin/python2-qr to provide /usr/bin/qr (qr) in auto mode Setting up sssd-ad-common (1.16.1-1ubuntu1) ... Setting up libfastinfoset-java (1.2.12-3) ... Setting up velocity (1.7-5) ... Setting up sssd-krb5 (1.16.1-1ubuntu1) ... Setting up libmsv-java (2009.1+dfsg1-5) ... Setting up sssd-ldap (1.16.1-1ubuntu1) ... Setting up sssd-proxy (1.16.1-1ubuntu1) ... Setting up libcdi-api-java (1.2-2) ... Setting up libpwquality1:amd64 (1.4.0-2) ... Setting up libdrm-intel1:amd64 (2.4.91-2) ... Setting up python-augeas (0.5.0-1) ... Setting up sssd-dbus (1.16.1-1ubuntu1) ... Setting up certmonger (0.79.5-3ubuntu1) ... Setting up libsnappy-java (1.1.4-1) ... Setting up libplexus-archiver-java (3.5-2) ... Setting up libhttpclient-java (4.5.5-1) ... Setting up softhsm2 (2.2.0-3.1build1) ... Setting up bind9-dyndb-ldap (11.1-3ubuntu1) ... Setting up librngom-java (2.3.0-3) ... Setting up python-cffi (1.11.5-1) ... Setting up libxt6:amd64 (1:1.1.5-1) ... Setting up python-requests (2.18.4-2) ... Setting up python-ipalib (4.7.0~pre1+git20180411-2ubuntu2) ... Setting up libsisu-guice-java (4.2.0-1) ... Setting up python-html5lib (0.999999999-1) ... Setting up libsisu-ioc-java (2.3.0-11) ... Setting up opendnssec-enforcer-sqlite3 (1:2.1.3-0.2build1) ... Setting up sssd-ad (1.16.1-1ubuntu1) ... Setting up python-custodia (0.5.0-3) ... Setting up libpam-pwquality:amd64 (1.4.0-2) ... Setting up libguice-java (4.0-4) ... Setting up pki-base (10.6.0-1ubuntu2) ... Setting up sssd-ipa (1.16.1-1ubuntu1) ... Setting up sssd (1.16.1-1ubuntu1) ... Setting up libgl1-mesa-dri:amd64 (18.0.5-0ubuntu0~18.04.1) ... Setting up libpam-sss:amd64 (1.16.1-1ubuntu1) ... Setting up libwoodstox-java (1:4.1.3-1) ... Setting up libxmu6:amd64 (2:1.1.2-2) ... Setting up libjackson2-jaxrs-providers-java (2.9.4-1) ... Setting up python-ipaclient (4.7.0~pre1+git20180411-2ubuntu2) ... Setting up opendnssec-enforcer (1:2.1.3-0.2build1) ... Setting up libsisu-inject-java (0.3.2-2) ... Setting up pki-tools (10.6.0-1ubuntu2) ... Setting up libglx-mesa0:amd64 (18.0.5-0ubuntu0~18.04.1) ... Setting up opendnssec (1:2.1.3-0.2build1) ... Setting up libxaw7:amd64 (2:1.0.13-1) ... Setting up custodia (0.5.0-3) ... Setting up freeipa-client (4.7.0~pre1+git20180411-2ubuntu2) ... Setting up libsisu-plexus-java (0.3.3-3) ... Setting up libglx0:amd64 (1.0.0-2ubuntu2.2) ... Setting up libmaven3-core-java (3.5.2-2) ... Setting up libmaven-shared-io-java (3.0.0-3) ... Setting up libgl1:amd64 (1.0.0-2ubuntu2.2) ... Setting up libmaven-file-management-java (3.0.0-1) ... Setting up x11-utils (7.7+3build1) ... Setting up libgl1-mesa-glx:amd64 (18.0.5-0ubuntu0~18.04.1) ... Setting up libatk-wrapper-java (0.33.3-20ubuntu0.1) ... Setting up libatk-wrapper-java-jni:amd64 (0.33.3-20ubuntu0.1) ... Setting up libistack-commons-java (3.0.6-1) ... Setting up libcodemodel-java (2.6+jaxb2.3.0-3) ... Setting up libtxw2-java (2.3.0-3) ... Setting up libverto-libevent1:amd64 (0.2.4-2.1ubuntu3) ... Setting up libverto1:amd64 (0.2.4-2.1ubuntu3) ... Setting up libjaxb-java (2.3.0-3) ... Setting up gssproxy (0.8.0-1) ... Setting up libresteasy3.0-java (3.0.19-2) ... Setting up krb5-kdc (1.16-2build1) ... Job for krb5-kdc.service failed because the control process exited with error code. See "systemctl status krb5-kdc.service" and "journalctl -xe" for details. invoke-rc.d: initscript krb5-kdc, action "start" failed. ● krb5-kdc.service - Kerberos 5 Key Distribution Center Loaded: loaded (/lib/systemd/system/krb5-kdc.service; enabled; vendor preset: enabled) Drop-In: /lib/systemd/system/krb5-kdc.service.d └─slapd-before-kdc.conf Active: failed (Result: exit-code) since Mon 2018-10-15 14:24:00 CEST; 16ms ago Process: 17099 ExecStart=/usr/sbin/krb5kdc -P /var/run/krb5-kdc.pid $DAEMON_ARGS (code=exited, status=1/FAILURE)
Oct 15 14:24:00 freeipa.mdpi.com systemd[1]: Starting Kerberos 5 Key Distribution Center... Oct 15 14:24:00 freeipa.mdpi.com krb5kdc[17099]: Couldn't open log file /var/log/krb5kdc.log: Read-only file system Oct 15 14:24:00 freeipa.mdpi.com krb5kdc[17099]: Server error - while fetching master key K/M for realm IPA.MDPI.COM Oct 15 14:24:00 freeipa.mdpi.com krb5kdc[17099]: krb5kdc: cannot initialize realm IPA.MDPI.COM - see log file for details Oct 15 14:24:00 freeipa.mdpi.com systemd[1]: krb5-kdc.service: Control process exited, code=exited status=1 Oct 15 14:24:00 freeipa.mdpi.com systemd[1]: krb5-kdc.service: Failed with result 'exit-code'. Oct 15 14:24:00 freeipa.mdpi.com systemd[1]: Failed to start Kerberos 5 Key Distribution Center. Setting up libkrad0:amd64 (1.16-2build1) ... Setting up krb5-kdc-ldap (1.16-2build1) ... Setting up krb5-admin-server (1.16-2build1) ... Setting up pki-base-java (10.6.0-1ubuntu2) ... Setting up krb5-otp:amd64 (1.16-2build1) ... Setting up pki-server (10.6.0-1ubuntu2) ... pki-tomcatd-nuxwdog.target is a disabled or a static unit, not starting it. Job for pki-tomcatd.service failed because the control process exited with error code. See "systemctl status pki-tomcatd.service" and "journalctl -xe" for details. invoke-rc.d: initscript pki-tomcatd, action "start" failed. ● pki-tomcatd.service - LSB: Start pki-tomcatd at boot time Loaded: loaded (/etc/init.d/pki-tomcatd; generated) Active: failed (Result: exit-code) since Mon 2018-10-15 14:24:03 CEST; 17ms ago Docs: man:systemd-sysv-generator(8) Process: 17421 ExecStart=/etc/init.d/pki-tomcatd start (code=exited, status=1/FAILURE)
Oct 15 14:24:03 freeipa.mdpi.com systemd[1]: Starting LSB: Start pki-tomcatd at boot time... Oct 15 14:24:03 freeipa.mdpi.com pki-tomcatd[17421]: /usr/share/pki/scripts/config: line 41: break: only meaningful in a `for', `while', or `until' loop Oct 15 14:24:03 freeipa.mdpi.com pki-tomcatd[17421]: ERROR: No 'tomcat' instances installed! Oct 15 14:24:03 freeipa.mdpi.com systemd[1]: pki-tomcatd.service: Control process exited, code=exited status=1 Oct 15 14:24:03 freeipa.mdpi.com systemd[1]: pki-tomcatd.service: Failed with result 'exit-code'. Oct 15 14:24:03 freeipa.mdpi.com systemd[1]: Failed to start LSB: Start pki-tomcatd at boot time. pki-tomcatd start failed because no instance has been configured yet Setting up python-ipaserver (4.7.0~pre1+git20180411-2ubuntu2) ... Setting up pki-kra (10.6.0-1ubuntu2) ... Setting up pki-ca (10.6.0-1ubuntu2) ... Setting up freeipa-server (4.7.0~pre1+git20180411-2ubuntu2) ... dpkg: error processing package freeipa-server (--configure): installed freeipa-server package post-installation script subprocess returned error exit status 1 dpkg: dependency problems prevent configuration of freeipa-server-dns: freeipa-server-dns depends on freeipa-server (>= 4.7.0~pre1+git20180411-2ubuntu2); however: Package freeipa-server is not configured yet.
dpkg: error processing package freeipa-server-dns (--configure): dependency problems - leaving unconfigured Processing triggers for libc-bin (2.27-3ubuntu1) ... Processing triggers for dbus (1.12.2-1ubuntu1) ... No apport report written because the error message indicates its a followup error from a previous failure. Processing triggers for oddjob (0.34.3-4) ... Errors were encountered while processing: freeipa-server freeipa-server-dns E: Sub-process /usr/bin/dpkg returned an error code (1)
Thank you!
Milos
Anyone who could help?
Milos Cuculovic
On 15 Oct 2018, at 14:29, Milos Cuculovic cuculovic@mdpi.com wrote:
I am trying to install after an uninstall the freeipa-server package on Debian, which is now failing. I normally removed all packages and config files, something seems to still cause issues. The installation output is as follows, after running apt install freeipa-server (I^m first extracting main warning and failure lines I identified).
————— Warning: found usr.sbin.sssd in /etc/apparmor.d/force-complain, forcing complain mode Warning failed to create cache: usr.sbin.sssd ————— Failed to preset unit: Unit file /etc/systemd/system/bind9.service is masked. /usr/bin/deb-systemd-helper: error: systemctl preset failed on bind9.service: No such file or directory ————— ob for krb5-kdc.service failed because the control process exited with error code. See "systemctl status krb5-kdc.service" and "journalctl -xe" for details. invoke-rc.d: initscript krb5-kdc, action "start" failed. ● krb5-kdc.service - Kerberos 5 Key Distribution Center Loaded: loaded (/lib/systemd/system/krb5-kdc.service; enabled; vendor preset: enabled) Drop-In: /lib/systemd/system/krb5-kdc.service.d └─slapd-before-kdc.conf Active: failed (Result: exit-code) since Mon 2018-10-15 14:24:00 CEST; 16ms ago Process: 17099 ExecStart=/usr/sbin/krb5kdc -P /var/run/krb5-kdc.pid $DAEMON_ARGS (code=exited, status=1/FAILURE)
Oct 15 14:24:00 freeipa.mdpi.com systemd[1]: Starting Kerberos 5 Key Distribution Center... Oct 15 14:24:00 freeipa.mdpi.com krb5kdc[17099]: Couldn't open log file /var/log/krb5kdc.log: Read-only file system Oct 15 14:24:00 freeipa.mdpi.com krb5kdc[17099]: Server error - while fetching master key K/M for realm IPA.MDPI.COM Oct 15 14:24:00 freeipa.mdpi.com krb5kdc[17099]: krb5kdc: cannot initialize realm IPA.MDPI.COM - see log file for details Oct 15 14:24:00 freeipa.mdpi.com systemd[1]: krb5-kdc.service: Control process exited, code=exited status=1 Oct 15 14:24:00 freeipa.mdpi.com systemd[1]: krb5-kdc.service: Failed with result 'exit-code'. Oct 15 14:24:00 freeipa.mdpi.com systemd[1]: Failed to start Kerberos 5 Key Distribution Center. ————— pki-tomcatd-nuxwdog.target is a disabled or a static unit, not starting it. Job for pki-tomcatd.service failed because the control process exited with error code. See "systemctl status pki-tomcatd.service" and "journalctl -xe" for details. invoke-rc.d: initscript pki-tomcatd, action "start" failed. ● pki-tomcatd.service - LSB: Start pki-tomcatd at boot time Loaded: loaded (/etc/init.d/pki-tomcatd; generated) Active: failed (Result: exit-code) since Mon 2018-10-15 14:24:03 CEST; 17ms ago Docs: man:systemd-sysv-generator(8) Process: 17421 ExecStart=/etc/init.d/pki-tomcatd start (code=exited, status=1/FAILURE)
Oct 15 14:24:03 freeipa.mdpi.com systemd[1]: Starting LSB: Start pki-tomcatd at boot time... Oct 15 14:24:03 freeipa.mdpi.com pki-tomcatd[17421]: /usr/share/pki/scripts/config: line 41: break: only meaningful in a `for', `while', or `until' loop Oct 15 14:24:03 freeipa.mdpi.com pki-tomcatd[17421]: ERROR: No 'tomcat' instances installed! Oct 15 14:24:03 freeipa.mdpi.com systemd[1]: pki-tomcatd.service: Control process exited, code=exited status=1 Oct 15 14:24:03 freeipa.mdpi.com systemd[1]: pki-tomcatd.service: Failed with result 'exit-code'. Oct 15 14:24:03 freeipa.mdpi.com systemd[1]: Failed to start LSB: Start pki-tomcatd at boot time. ————— Setting up freeipa-server (4.7.0~pre1+git20180411-2ubuntu2) ... dpkg: error processing package freeipa-server (--configure): installed freeipa-server package post-installation script subprocess returned error exit status 1 dpkg: dependency problems prevent configuration of freeipa-server-dns: freeipa-server-dns depends on freeipa-server (>= 4.7.0~pre1+git20180411-2ubuntu2); however: Package freeipa-server is not configured yet.
dpkg: error processing package freeipa-server-dns (--configure): dependency problems - leaving unconfigured Processing triggers for libc-bin (2.27-3ubuntu1) ... Processing triggers for dbus (1.12.2-1ubuntu1) ... No apport report written because the error message indicates its a followup error from a previous failure. Processing triggers for oddjob (0.34.3-4) ... Errors were encountered while processing: freeipa-server freeipa-server-dns E: Sub-process /usr/bin/dpkg returned an error code (1) —————
FULL OUTPUT: Setting up libsymkey-jni (10.6.0-1ubuntu2) ... Setting up python-dnspython (1.15.0-1) ... Setting up libxcb-present0:amd64 (1.13-1) ... Setting up libslf4j-java (1.7.25-3) ... Setting up libglvnd0:amd64 (1.0.0-2ubuntu2.2) ... Setting up oddjob (0.34.3-4) ... Setting up libxinerama1:amd64 (2:1.1.3-1) ... Setting up libplexus-classworlds-java (2.5.2-2) ... Processing triggers for ufw (0.35-5) ... Setting up libxcb-dri2-0:amd64 (1.13-1) ... Setting up libsss-idmap0 (1.16.1-1ubuntu1) ... Setting up libhttp-parser2.7.1:amd64 (2.7.1-2) ... Setting up libxcb-dri3-0:amd64 (1.13-1) ... Setting up libxcb-glx0:amd64 (1.13-1) ... Setting up libcommons-io-java (2.6-2) ... Setting up libstax-java (1.2.0-4) ... Setting up libargs4j-java (2.33-1) ... Setting up python-urllib3 (1.22-1) ... Setting up libapache2-mod-lookup-identity (1.0.0-1) ... apache2_invoke: Enable module lookup_identity Setting up libpath-utils1:amd64 (0.6.1-1) ... Setting up libjettison-java (1.4.0-1) ... Setting up libsocket-getaddrinfo-perl (0.22-3) ... Setting up libknopflerfish-osgi-framework-java (6.1.1-2) ... Setting up libperl4-corelibs-perl (0.004-1) ... Setting up libsss-nss-idmap0 (1.16.1-1ubuntu1) ... Setting up libnfsidmap2:amd64 (0.25-5.1) ... Setting up python-usb (1.0.0-1) ... Setting up libxdamage1:amd64 (1:1.1.4-3) ... Setting up libhawtjni-runtime-java (1.15-2) ... Setting up libhttpcore-java (4.4.9-1) ... Setting up libjackson2-core-java (2.9.4-1) ... Setting up ieee-data (20180204.1) ... Setting up libjsr311-api-java (1.1.1-1) ... Setting up python-yubico (1.3.2-1) ... Setting up libyaml-snake-java (1.20-1) ... Setting up libxfixes3:amd64 (1:5.0.3-1) ... Setting up oddjob-mkhomedir (0.34.3-4) ... Processing triggers for ureadahead (0.100.0-20) ... Setting up libdrm-amdgpu1:amd64 (2.4.91-2) ... Setting up libllvm6.0:amd64 (1:6.0-1ubuntu2) ... Setting up chrony (3.2-4ubuntu4.2) ... Setting up libisorelax-java (20041111-10) ... Setting up python-openssl (17.5.0-1ubuntu1) ... Setting up libplexus-cipher-java (1.7-3) ... Setting up python-ply (3.11-1) ... Setting up python-kdcproxy (0.3.2-5) ... Setting up python-netaddr (0.7.19-1) ... Setting up python-jwcrypto (0.4.2-1) ... Setting up libatspi2.0-0:amd64 (2.28.0-1) ... Setting up libdtd-parser-java (1.2~svn20110404-1) ... Setting up libsvrcore0:amd64 (1:4.1.2+dfsg1-3) ... Setting up at-spi2-core (2.28.0-1) ... Setting up libsss-certmap0 (1.16.1-1ubuntu1) ... Setting up libxshmfence1:amd64 (1.3-1) ... Setting up libjaxb-api-java (2.2.9-1) ... Setting up krb5-pkinit:amd64 (1.16-2build1) ... Setting up libstax2-api-java (3.1.1-1) ... Setting up python-certifi (2018.1.18-2) ... Setting up libstax-ex-java (1.7.8-1) ... Setting up libipa-hbac0 (1.16.1-1ubuntu1) ... Setting up dogtag-pki-server-theme (10.6.0-1ubuntu2) ... Setting up libplexus-interpolation-java (1.24-1) ... Setting up libnl-route-3-200:amd64 (3.2.29-0ubuntu3) ... Setting up libglapi-mesa:amd64 (18.0.5-0ubuntu0~18.04.1) ... Setting up fonts-open-sans (1.11-1) ... Setting up python-sss (1.16.1-1ubuntu1) ... Setting up libplexus-component-annotations-java (1.7.1-7) ... Setting up python-pkg-resources (39.0.1-2) ... Setting up freeipa-common (4.7.0~pre1+git20180411-2ubuntu2) ... Setting up opendnssec-common (1:2.1.3-0.2build1) ... Setting up libmaven-shared-utils-java (3.1.0-2) ... Setting up python-pyasn1-modules (0.2.1-0.2) ... Setting up libdhash1:amd64 (0.6.1-1) ... Setting up python-nss (1.0.0-1build3) ... Setting up python-markupsafe (1.0-1build1) ... Setting up fonts-font-awesome (4.7.0~dfsg-3) ... Setting up python-netifaces (0.10.4-0.1build4) ... Setting up libjackson2-annotations-java (2.9.4-1) ... Setting up libldns2:amd64 (1.7.0-3ubuntu4) ... Setting up sqlite3 (3.22.0-1) ... Setting up libjoda-time-java (2.9.9-1) ... Setting up libplexus-utils2-java (3.0.24-3) ... Setting up libjackson2-dataformat-cbor (2.7.8-3) ... Setting up libcollection4:amd64 (0.6.1-1) ... Setting up libwagon-provider-api-java (3.0.0-2) ... Setting up libxcb-sync1:amd64 (1.13-1) ... Setting up libjsr305-java (0.1~+svn49-10) ... Setting up python-dateutil (2.6.1-1) ... Setting up ldap-utils (2.4.45+dfsg-1ubuntu1) ... Setting up libatk1.0-data (2.28.1-1) ... Setting up libjackson2-databind-java (2.9.5-1) ... Setting up libjackson2-dataformat-yaml (2.8.10-3) ... Setting up libx11-xcb1:amd64 (2:1.6.4-3ubuntu0.1) ... Setting up libnetaddr-ip-perl (4.079+dfsg-1build2) ... Setting up python-gi (3.26.1-2) ... Setting up libmozilla-ldap-perl (1.5.3-2build4) ... Setting up libservlet3.1-java (8.5.30-1ubuntu1.4) ... Setting up libjboss-jdeparser2-java (2.0.2-1) ... Setting up libjavassist-java (1:3.21.0-2) ... Setting up p11-kit-modules:amd64 (0.23.9-2) ... Setting up libnss-sss:amd64 (1.16.1-1ubuntu1) ... Setting up softhsm2-common (2.2.0-3.1build1) ... Setting up libhsm-bin (1:2.1.3-0.2build1) ... Setting up python3-sss (1.16.1-1ubuntu1) ... Setting up libjackson2-module-jaxb-annotations-java (2.8.10-2) ... Setting up libxmlrpc-core-c3 (1.33.14-8build1) ... Setting up libxxf86dga1:amd64 (2:1.1.4-1) ... Processing triggers for libc-bin (2.27-3ubuntu1) ... Setting up libjackson-json-java (1.9.2-9) ... Setting up python-bs4 (4.6.0-1) ... Setting up python-selinux (2.7-2build2) ... Setting up libgeronimo-interceptor-3.0-spec-java (1.0.1-4fakesync) ... Setting up libmaven-resolver-java (1.1.0-3) ... Setting up libsocket6-perl (0.27-1build2) ... Setting up libnsspem:amd64 (1.0.3-0ubuntu2) ... Setting up 389-ds-base-libs (1.3.7.10-1ubuntu1) ... Setting up libplexus-utils-java (1:1.5.15-5) ... Setting up libnss3-tools (2:3.35-2ubuntu2) ... Setting up python-libipa-hbac (1.16.1-1ubuntu1) ... Setting up libnuxwdog0 (1.0.3-4) ... Setting up libjackson2-dataformat-xml-java (2.9.4-1) ... Setting up libcommons-compress-java (1.13-2) ... Setting up libatk1.0-0:amd64 (2.28.1-1) ... Setting up libcommons-lang3-java (3.5-2ubuntu1) ... Setting up libjaxen-java (1.1.6-3) ... Setting up libwebpmux3:amd64 (0.6.1-2) ... Setting up libsnappy1v5:amd64 (1.1.7-1) ... Setting up libjansi-native-java (1.7-1) ... Setting up python-systemd (234-1build1) ... Processing triggers for systemd (237-3ubuntu10.3) ... Setting up libpwquality-common (1.4.0-2) ... Setting up augeas-lenses (1.10.1-2) ... Setting up python-lxml:amd64 (4.2.1-1) ... Setting up libatk-bridge2.0-0:amd64 (2.26.2-1) ... Setting up libjaxrs-api-java (2.1-1) ... Setting up libice6:amd64 (2:1.0.9-2) ... Setting up libasm-java (6.0-1) ... Setting up libfontenc1:amd64 (1:1.1.3-1) ... Setting up libxcomposite1:amd64 (1:0.4.4-2) ... Setting up libcrack2:amd64 (2.9.2-5build1) ... Setting up python-olefile (0.45.1-1) ... Setting up libwebpdemux2:amd64 (0.6.1-2) ... Setting up libxcb-shape0:amd64 (1.13-1) ... Setting up libpciaccess0:amd64 (0.14-1) ... Setting up libstreambuffer-java (1.5.4-1) ... Setting up libxv1:amd64 (2:1.0.11-1) ... Processing triggers for man-db (2.8.3-2) ... Setting up libatinject-jsr330-api-java (1.0+ds1-5) ... Setting up libjboss-logging-tools-java (2.1.0-2) ... Setting up libbasicobjects0:amd64 (0.6.1-1) ... Setting up libmaven-parent-java (27-2) ... Setting up python3-ply (3.11-1) ... Setting up libdrm-radeon1:amd64 (2.4.91-2) ... Setting up libref-array1:amd64 (0.6.1-1) ... Processing triggers for dbus (1.12.2-1ubuntu1) ... Setting up libxxf86vm1:amd64 (1:1.1.4-1) ... Setting up libdrm-nouveau2:amd64 (2.4.91-2) ... Setting up libxft2:amd64 (2.3.2-1) ... Setting up python-dbus (1.2.6-1) ... Setting up libcommons-codec-java (1.11-1) ... Setting up libjss-java (4.4.3-1) ... Setting up libjackson2-dataformat-smile (2.7.8-3) ... Setting up slapi-nis (0.56.1-1build1) ... Setting up libcommons-lang-java (2.6-8) ... Setting up libcurl3-nss:amd64 (7.58.0-2ubuntu3.3) ... Setting up python-pil:amd64 (5.1.0-1) ... Setting up libcommons-httpclient-java (3.1-14) ... Setting up libaopalliance-java (20070526-6) ... Setting up libc-ares2:amd64 (1.14.0-1) ... Setting up libjs-dojo-core (1.11.0+dfsg-1) ... Setting up python-webencodings (0.5-2) ... Setting up libgeronimo-annotation-1.3-spec-java (1.0-1) ... Setting up libdbi-perl (1.640-1) ... Setting up libjboss-logging-java (3.3.2-1) ... Setting up libsss-sudo (1.16.1-1ubuntu1) ... Checking NSS setup... Setting up libxrandr2:amd64 (2:1.5.1-1) ... Setting up librelaxng-datatype-java (1.0+ds1-3) ... Setting up libcommons-cli-java (1.4-1) ... Setting up libini-config5:amd64 (0.6.1-1) ... Setting up libplexus-sec-dispatcher-java (1.4-3) ... Setting up sssd-common (1.16.1-1ubuntu1) ... Warning: found usr.sbin.sssd in /etc/apparmor.d/force-complain, forcing complain mode Warning failed to create cache: usr.sbin.sssd sssd-secrets.service is a disabled or a static unit not running, not starting it. Setting up python-ldap (3.0.0-1) ... Setting up 389-ds-base (1.3.7.10-1ubuntu1) ... dirsrv-snmp.service is a disabled or a static unit, not starting it. dirsrv.target is a disabled or a static unit, not starting it. Setting up bind9utils (1:9.11.3+dfsg-1ubuntu1.2) ... Setting up libdom4j-java (2.1.0-2) ... Setting up python-setuptools (39.0.1-2) ... Setting up libsm6:amd64 (2:1.2.2-1) ... Setting up libplexus-io-java (3.0.0-1) ... Setting up libscannotation-java (1.0.2+svn20110812-3) ... Setting up libsymkey-java (10.6.0-1ubuntu2) ... Setting up python-libsss-nss-idmap (1.16.1-1ubuntu1) ... Setting up sssd-krb5-common (1.16.1-1ubuntu1) ... Setting up python-chardet (3.0.4-1) ... Setting up libdbd-sqlite3-perl (1.56-1) ... Setting up python-pycparser (2.18-2) ... Setting up libnuxwdog-java (1.0.3-4) ... Setting up libjs-dojo-dijit (1.11.0+dfsg-1) ... Setting up libsofthsm2 (2.2.0-3.1build1) ... Setting up libcglib-java (3.2.6-2) ... Setting up opendnssec-signer (1:2.1.3-0.2build1) ... Setting up python-jinja2 (2.10-1) ... Setting up libtomcatjss-java (7.3.0~rc-1) ... Setting up cracklib-runtime (2.9.2-5build1) ... Setting up libjs-dojo-dojox (1.11.0+dfsg-1) ... Setting up libsnappy-jni (1.1.4-1) ... Setting up libldap-java (4.19+dfsg1-1) ... Setting up libjansi-java (1.16-1) ... Setting up p11-kit (0.23.9-2) ... Setting up libaugeas0:amd64 (1.10.1-2) ... Setting up libxsom-java (2.3.0-3) ... Setting up bind9 (1:9.11.3+dfsg-1ubuntu1.2) ... Failed to preset unit: Unit file /etc/systemd/system/bind9.service is masked. /usr/bin/deb-systemd-helper: error: systemctl preset failed on bind9.service: No such file or directory bind9-pkcs11.service is a disabled or a static unit not running, not starting it. bind9-resolvconf.service is a disabled or a static unit not running, not starting it. Setting up libguava-java (19.0-1) ... Setting up python-qrcode (5.3-1) ... update-alternatives: using /usr/bin/python2-qr to provide /usr/bin/qr (qr) in auto mode Setting up sssd-ad-common (1.16.1-1ubuntu1) ... Setting up libfastinfoset-java (1.2.12-3) ... Setting up velocity (1.7-5) ... Setting up sssd-krb5 (1.16.1-1ubuntu1) ... Setting up libmsv-java (2009.1+dfsg1-5) ... Setting up sssd-ldap (1.16.1-1ubuntu1) ... Setting up sssd-proxy (1.16.1-1ubuntu1) ... Setting up libcdi-api-java (1.2-2) ... Setting up libpwquality1:amd64 (1.4.0-2) ... Setting up libdrm-intel1:amd64 (2.4.91-2) ... Setting up python-augeas (0.5.0-1) ... Setting up sssd-dbus (1.16.1-1ubuntu1) ... Setting up certmonger (0.79.5-3ubuntu1) ... Setting up libsnappy-java (1.1.4-1) ... Setting up libplexus-archiver-java (3.5-2) ... Setting up libhttpclient-java (4.5.5-1) ... Setting up softhsm2 (2.2.0-3.1build1) ... Setting up bind9-dyndb-ldap (11.1-3ubuntu1) ... Setting up librngom-java (2.3.0-3) ... Setting up python-cffi (1.11.5-1) ... Setting up libxt6:amd64 (1:1.1.5-1) ... Setting up python-requests (2.18.4-2) ... Setting up python-ipalib (4.7.0~pre1+git20180411-2ubuntu2) ... Setting up libsisu-guice-java (4.2.0-1) ... Setting up python-html5lib (0.999999999-1) ... Setting up libsisu-ioc-java (2.3.0-11) ... Setting up opendnssec-enforcer-sqlite3 (1:2.1.3-0.2build1) ... Setting up sssd-ad (1.16.1-1ubuntu1) ... Setting up python-custodia (0.5.0-3) ... Setting up libpam-pwquality:amd64 (1.4.0-2) ... Setting up libguice-java (4.0-4) ... Setting up pki-base (10.6.0-1ubuntu2) ... Setting up sssd-ipa (1.16.1-1ubuntu1) ... Setting up sssd (1.16.1-1ubuntu1) ... Setting up libgl1-mesa-dri:amd64 (18.0.5-0ubuntu0~18.04.1) ... Setting up libpam-sss:amd64 (1.16.1-1ubuntu1) ... Setting up libwoodstox-java (1:4.1.3-1) ... Setting up libxmu6:amd64 (2:1.1.2-2) ... Setting up libjackson2-jaxrs-providers-java (2.9.4-1) ... Setting up python-ipaclient (4.7.0~pre1+git20180411-2ubuntu2) ... Setting up opendnssec-enforcer (1:2.1.3-0.2build1) ... Setting up libsisu-inject-java (0.3.2-2) ... Setting up pki-tools (10.6.0-1ubuntu2) ... Setting up libglx-mesa0:amd64 (18.0.5-0ubuntu0~18.04.1) ... Setting up opendnssec (1:2.1.3-0.2build1) ... Setting up libxaw7:amd64 (2:1.0.13-1) ... Setting up custodia (0.5.0-3) ... Setting up freeipa-client (4.7.0~pre1+git20180411-2ubuntu2) ... Setting up libsisu-plexus-java (0.3.3-3) ... Setting up libglx0:amd64 (1.0.0-2ubuntu2.2) ... Setting up libmaven3-core-java (3.5.2-2) ... Setting up libmaven-shared-io-java (3.0.0-3) ... Setting up libgl1:amd64 (1.0.0-2ubuntu2.2) ... Setting up libmaven-file-management-java (3.0.0-1) ... Setting up x11-utils (7.7+3build1) ... Setting up libgl1-mesa-glx:amd64 (18.0.5-0ubuntu0~18.04.1) ... Setting up libatk-wrapper-java (0.33.3-20ubuntu0.1) ... Setting up libatk-wrapper-java-jni:amd64 (0.33.3-20ubuntu0.1) ... Setting up libistack-commons-java (3.0.6-1) ... Setting up libcodemodel-java (2.6+jaxb2.3.0-3) ... Setting up libtxw2-java (2.3.0-3) ... Setting up libverto-libevent1:amd64 (0.2.4-2.1ubuntu3) ... Setting up libverto1:amd64 (0.2.4-2.1ubuntu3) ... Setting up libjaxb-java (2.3.0-3) ... Setting up gssproxy (0.8.0-1) ... Setting up libresteasy3.0-java (3.0.19-2) ... Setting up krb5-kdc (1.16-2build1) ... Job for krb5-kdc.service failed because the control process exited with error code. See "systemctl status krb5-kdc.service" and "journalctl -xe" for details. invoke-rc.d: initscript krb5-kdc, action "start" failed. ● krb5-kdc.service - Kerberos 5 Key Distribution Center Loaded: loaded (/lib/systemd/system/krb5-kdc.service; enabled; vendor preset: enabled) Drop-In: /lib/systemd/system/krb5-kdc.service.d └─slapd-before-kdc.conf Active: failed (Result: exit-code) since Mon 2018-10-15 14:24:00 CEST; 16ms ago Process: 17099 ExecStart=/usr/sbin/krb5kdc -P /var/run/krb5-kdc.pid $DAEMON_ARGS (code=exited, status=1/FAILURE)
Oct 15 14:24:00 freeipa.mdpi.com systemd[1]: Starting Kerberos 5 Key Distribution Center... Oct 15 14:24:00 freeipa.mdpi.com krb5kdc[17099]: Couldn't open log file /var/log/krb5kdc.log: Read-only file system Oct 15 14:24:00 freeipa.mdpi.com krb5kdc[17099]: Server error - while fetching master key K/M for realm IPA.MDPI.COM Oct 15 14:24:00 freeipa.mdpi.com krb5kdc[17099]: krb5kdc: cannot initialize realm IPA.MDPI.COM - see log file for details Oct 15 14:24:00 freeipa.mdpi.com systemd[1]: krb5-kdc.service: Control process exited, code=exited status=1 Oct 15 14:24:00 freeipa.mdpi.com systemd[1]: krb5-kdc.service: Failed with result 'exit-code'. Oct 15 14:24:00 freeipa.mdpi.com systemd[1]: Failed to start Kerberos 5 Key Distribution Center. Setting up libkrad0:amd64 (1.16-2build1) ... Setting up krb5-kdc-ldap (1.16-2build1) ... Setting up krb5-admin-server (1.16-2build1) ... Setting up pki-base-java (10.6.0-1ubuntu2) ... Setting up krb5-otp:amd64 (1.16-2build1) ... Setting up pki-server (10.6.0-1ubuntu2) ... pki-tomcatd-nuxwdog.target is a disabled or a static unit, not starting it. Job for pki-tomcatd.service failed because the control process exited with error code. See "systemctl status pki-tomcatd.service" and "journalctl -xe" for details. invoke-rc.d: initscript pki-tomcatd, action "start" failed. ● pki-tomcatd.service - LSB: Start pki-tomcatd at boot time Loaded: loaded (/etc/init.d/pki-tomcatd; generated) Active: failed (Result: exit-code) since Mon 2018-10-15 14:24:03 CEST; 17ms ago Docs: man:systemd-sysv-generator(8) Process: 17421 ExecStart=/etc/init.d/pki-tomcatd start (code=exited, status=1/FAILURE)
Oct 15 14:24:03 freeipa.mdpi.com systemd[1]: Starting LSB: Start pki-tomcatd at boot time... Oct 15 14:24:03 freeipa.mdpi.com pki-tomcatd[17421]: /usr/share/pki/scripts/config: line 41: break: only meaningful in a `for', `while', or `until' loop Oct 15 14:24:03 freeipa.mdpi.com pki-tomcatd[17421]: ERROR: No 'tomcat' instances installed! Oct 15 14:24:03 freeipa.mdpi.com systemd[1]: pki-tomcatd.service: Control process exited, code=exited status=1 Oct 15 14:24:03 freeipa.mdpi.com systemd[1]: pki-tomcatd.service: Failed with result 'exit-code'. Oct 15 14:24:03 freeipa.mdpi.com systemd[1]: Failed to start LSB: Start pki-tomcatd at boot time. pki-tomcatd start failed because no instance has been configured yet Setting up python-ipaserver (4.7.0~pre1+git20180411-2ubuntu2) ... Setting up pki-kra (10.6.0-1ubuntu2) ... Setting up pki-ca (10.6.0-1ubuntu2) ... Setting up freeipa-server (4.7.0~pre1+git20180411-2ubuntu2) ... dpkg: error processing package freeipa-server (--configure): installed freeipa-server package post-installation script subprocess returned error exit status 1 dpkg: dependency problems prevent configuration of freeipa-server-dns: freeipa-server-dns depends on freeipa-server (>= 4.7.0~pre1+git20180411-2ubuntu2); however: Package freeipa-server is not configured yet.
dpkg: error processing package freeipa-server-dns (--configure): dependency problems - leaving unconfigured Processing triggers for libc-bin (2.27-3ubuntu1) ... Processing triggers for dbus (1.12.2-1ubuntu1) ... No apport report written because the error message indicates its a followup error from a previous failure. Processing triggers for oddjob (0.34.3-4) ... Errors were encountered while processing: freeipa-server freeipa-server-dns E: Sub-process /usr/bin/dpkg returned an error code (1)
Thank you!
Milos
On 24.10.2018 09:57, Milos Cuculovic via FreeIPA-users wrote:
Anyone who could help?
You are mixing Debian and Ubuntu repositories, I don't think that's a proper solution in the long run. Server install on Ubuntu 18.10 should work more or less, stock 18.04 has issues, and Debian is missing some dependencies like libnss-pem, until certmonger is ported to openssl (if ever).
Thank you Timo,
In the meantime I installed the freeipa-server on another clean Ubuntu server, which worked well. Then installed the client on this one, which also worked well. Would be good however to understand what’s the issue with the first server.
Milos
On 24 Oct 2018, at 13:20, Timo Aaltonen tjaalton@ubuntu.com wrote:
On 24.10.2018 09:57, Milos Cuculovic via FreeIPA-users wrote:
Anyone who could help?
You are mixing Debian and Ubuntu repositories, I don't think that's a proper solution in the long run. Server install on Ubuntu 18.10 should work more or less, stock 18.04 has issues, and Debian is missing some dependencies like libnss-pem, until certmonger is ported to openssl (if ever).
-- t
Hi Timo At present, the introduction of java11 in debian leads to the use of dogtag, the freeipa-server installation fails, and the following error message is reported.
root@node1:~# java -version
openjdk version "11.0.4-ea" 2019-07-16
OpenJDK Runtime Environment (build 11.0.4-ea+10-post-Debian-1)
OpenJDK 64-Bit Server VM (build 11.0.4-ea+10-post-Debian-1, mixed mode, sharing)
root@node1:~#
root@node1:~# BtoA
-Djava.ext.dirs=/usr/share/pki/lib is not supported. Use -classpath instead.
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
Can we use the previous java8 solution to replace java11 in debian? Or there are other ways to achieve freeipa-server installation on debian. We can only find the 10.6.8 version in the official website of the pki package, how to get the old version?
When can this dogtag bug be fixed? Currently, freeipa4.7.2 does not have a server deb package.
Thanks a lot.
On 16.7.2019 19.29, 810410559--- via FreeIPA-users wrote:
Hi Timo At present, the introduction of java11 in debian leads to the use of dogtag, the freeipa-server installation fails, and the following error message is reported.
root@node1:~# java -version
openjdk version "11.0.4-ea" 2019-07-16
OpenJDK Runtime Environment (build 11.0.4-ea+10-post-Debian-1)
OpenJDK 64-Bit Server VM (build 11.0.4-ea+10-post-Debian-1, mixed mode, sharing)
root@node1:~#
root@node1:~# BtoA
-Djava.ext.dirs=/usr/share/pki/lib is not supported. Use -classpath instead.
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
Can we use the previous java8 solution to replace java11 in debian? Or there are other ways to achieve freeipa-server installation on debian. We can only find the 10.6.8 version in the official website of the pki package, how to get the old version?
When can this dogtag bug be fixed? Currently, freeipa4.7.2 does not have a server deb package.
Hmm actually a correction to my earlier reply to the other thread; Debian doesn't have a working Dogtag right now, because they removed JDK8 for a while. It's back now, so I've uploaded new jss/tomcatjss/dogtag to unstable. It still leaves freeipa-server which isn't fully ready yet and exists only in experimental for now.
Anyway, I'm pretty sure you'd find a better/working solution with another distro (Fedora/Centos/RHEL/...) if you need ipa server now.
Hi Milos Want to know if your freeipa-server installed with debian9 is normal, which version of freeipa is installed? At present, we can't install on debian because of the problem of jdk11. I would like to ask you for the installation experience. Tanks ahead.
freeipa-users@lists.fedorahosted.org
-
810410559＠qq.com -
Milos Cuculovic -
Timo Aaltonen