Hello, the subject of the message may sound a little bit strange, but let me explain what I’m trying to do.
I have a machine with an provisioner (xCAT) that is able to boot and control different types of computer nodes. A stateless node is just a machine that boots over the network from a shared image on the server.
What I’m trying to do?
Join those stateless nodes to FreeIPA Server.
To do this, I’m aware that I can’t just run freeipa-client-install on the image chroot, since it will not behave as expected.
At this point xCAT (the provisioner) can create the DNS registers of the stateless nodes on FreeIPA integrated DNS (using TSIG keys). But I need to properly join the nodes to the server.
There’s a way to manually register the nodes on the server? And about the users? How to enable them? Just Configure SSSD on the image and it should be fine? The certificates, client certificates and things like this? There’s something that I need to do? Automount?
Any help is really appreciated.
Thanks,
Hi
Perhaps some boot script to run the ipa-client-install command when a new instance boots up? I'm not sure how the system would behave if you run the ipa-client-install command multiple times, should the same machine name boots more than once.
For HBAC rules you can use "auto-member" to automatically put new hosts into particular host groups for which you would have existing HABC rules.
Regards Angus
________________________________ From: Vinícius Ferrão via FreeIPA-users freeipa-users@lists.fedorahosted.org Sent: 23 September 2019 01:10 To: freeipa-users@lists.fedorahosted.org freeipa-users@lists.fedorahosted.org Cc: Vinícius Ferrão ferrao@versatushpc.com.br Subject: [Freeipa-users] Manually join machines in stateless environment
Hello, the subject of the message may sound a little bit strange, but let me explain what I’m trying to do.
I have a machine with an provisioner (xCAT) that is able to boot and control different types of computer nodes. A stateless node is just a machine that boots over the network from a shared image on the server.
What I’m trying to do?
Join those stateless nodes to FreeIPA Server.
To do this, I’m aware that I can’t just run freeipa-client-install on the image chroot, since it will not behave as expected.
At this point xCAT (the provisioner) can create the DNS registers of the stateless nodes on FreeIPA integrated DNS (using TSIG keys). But I need to properly join the nodes to the server.
There’s a way to manually register the nodes on the server? And about the users? How to enable them? Just Configure SSSD on the image and it should be fine? The certificates, client certificates and things like this? There’s something that I need to do? Automount?
Any help is really appreciated.
Thanks,
On 9/23/19 1:10 AM, Vinícius Ferrão via FreeIPA-users wrote:
Hello, the subject of the message may sound a little bit strange, but let me explain what I’m trying to do.
I have a machine with an provisioner (xCAT) that is able to boot and control different types of computer nodes. A stateless node is just a machine that boots over the network from a shared image on the server.
What I’m trying to do?
Join those stateless nodes to FreeIPA Server.
To do this, I’m aware that I can’t just run freeipa-client-install on the image chroot, since it will not behave as expected.
At this point xCAT (the provisioner) can create the DNS registers of the stateless nodes on FreeIPA integrated DNS (using TSIG keys). But I need to properly join the nodes to the server.
There’s a way to manually register the nodes on the server? And about the users? How to enable them? Just Configure SSSD on the image and it should be fine? The certificates, client certificates and things like this? There’s something that I need to do? Automount?
Any help is really appreciated.
Thanks,
FreeIPA-users mailing list -- freeipa-users@lists.fedorahosted.org To unsubscribe send an email to freeipa-users-leave@lists.fedorahosted.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedorahosted.org/archives/list/freeipa-users@lists.fedorahoste...
Hi, xCAT probably offers you the possibility to run a custom script at the end of the installation. If it's the case, you can use a workflow similar to what is described in "Setting up an IdM Client Through Kickstart" [1]. You need to create a client host entry first, and the custom script on the client will call ipa-client-install.
HTH, flo
[1] https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/htm...
Florence and Angus, thanks for the replies.
xCAT definitely can run scripts at boot time. And the kickstart method seems to be the way to go. But I sill have some questions:
The nodes are stateless, so in a reboot all the configuration is lost and get back from the image. FreeIPA configuration will be lost and then restarted. Which appears to be ok. But there are two issues:
* The password for “joining” the FreeIPA domain that expires after the first use * The necessity of the hostname on the ipa-client-install command: hostname=client.example.com http://client.example.com/
With this two things I think we are unable to move forward, so the first question is:
1. Do I really need this password? Or better, the password can be permanent? It’s a “closed” system, so in terms of security I think there’s no problem.
2. Ipa-client-install can’t use the hostname of the node automatically? Do I really need to fill the hostname? Because this kills the ideia of a generic image.
Thank you all guys.
On 23 Sep 2019, at 04:04, Florence Blanc-Renaud flo@redhat.com wrote:
On 9/23/19 1:10 AM, Vinícius Ferrão via FreeIPA-users wrote:
Hello, the subject of the message may sound a little bit strange, but let me explain what I’m trying to do. I have a machine with an provisioner (xCAT) that is able to boot and control different types of computer nodes. A stateless node is just a machine that boots over the network from a shared image on the server. What I’m trying to do? Join those stateless nodes to FreeIPA Server. To do this, I’m aware that I can’t just run freeipa-client-install on the image chroot, since it will not behave as expected. At this point xCAT (the provisioner) can create the DNS registers of the stateless nodes on FreeIPA integrated DNS (using TSIG keys). But I need to properly join the nodes to the server. There’s a way to manually register the nodes on the server? And about the users? How to enable them? Just Configure SSSD on the image and it should be fine? The certificates, client certificates and things like this? There’s something that I need to do? Automount? Any help is really appreciated. Thanks, _______________________________________________ FreeIPA-users mailing list -- freeipa-users@lists.fedorahosted.org To unsubscribe send an email to freeipa-users-leave@lists.fedorahosted.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedorahosted.org/archives/list/freeipa-users@lists.fedorahoste...
Hi, xCAT probably offers you the possibility to run a custom script at the end of the installation. If it's the case, you can use a workflow similar to what is described in "Setting up an IdM Client Through Kickstart" [1]. You need to create a client host entry first, and the custom script on the client will call ipa-client-install.
HTH, flo
[1] https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/htm...
On Mon, 23 Sep 2019, Vinícius Ferrão via FreeIPA-users wrote:
Florence and Angus, thanks for the replies.
xCAT definitely can run scripts at boot time. And the kickstart method seems to be the way to go. But I sill have some questions:
The nodes are stateless, so in a reboot all the configuration is lost and get back from the image. FreeIPA configuration will be lost and then restarted. Which appears to be ok. But there are two issues:
- The password for “joining” the FreeIPA domain that expires after the first use
- The necessity of the hostname on the ipa-client-install command: hostname=client.example.com http://client.example.com/
With this two things I think we are unable to move forward, so the first question is:
- Do I really need this password? Or better, the password can be
permanent? It’s a “closed” system, so in terms of security I think there’s no problem.
Please check ipa-client-install manual page. It has all explanations for methods of enrollment. You can create a special user that has privileges to create machines and enroll them and record the user's credentials in the kickstart file.
- Ipa-client-install can’t use the hostname of the node automatically?
Do I really need to fill the hostname? Because this kills the ideia of a generic image.
This is also covered in the man page. In short, there is no need to supply hostname explicitly, it will be discovered.
Thank you all guys.
On 23 Sep 2019, at 04:04, Florence Blanc-Renaud flo@redhat.com wrote:
On 9/23/19 1:10 AM, Vinícius Ferrão via FreeIPA-users wrote:
Hello, the subject of the message may sound a little bit strange, but let me explain what I’m trying to do. I have a machine with an provisioner (xCAT) that is able to boot and control different types of computer nodes. A stateless node is just a machine that boots over the network from a shared image on the server. What I’m trying to do? Join those stateless nodes to FreeIPA Server. To do this, I’m aware that I can’t just run freeipa-client-install on the image chroot, since it will not behave as expected. At this point xCAT (the provisioner) can create the DNS registers of the stateless nodes on FreeIPA integrated DNS (using TSIG keys). But I need to properly join the nodes to the server. There’s a way to manually register the nodes on the server? And about the users? How to enable them? Just Configure SSSD on the image and it should be fine? The certificates, client certificates and things like this? There’s something that I need to do? Automount? Any help is really appreciated. Thanks, _______________________________________________ FreeIPA-users mailing list -- freeipa-users@lists.fedorahosted.org To unsubscribe send an email to freeipa-users-leave@lists.fedorahosted.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedorahosted.org/archives/list/freeipa-users@lists.fedorahoste...
Hi, xCAT probably offers you the possibility to run a custom script at the end of the installation. If it's the case, you can use a workflow similar to what is described in "Setting up an IdM Client Through Kickstart" [1]. You need to create a client host entry first, and the custom script on the client will call ipa-client-install.
HTH, flo
[1] https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/htm...
Hello all,
On 23 Sep 2019, at 12:59, Alexander Bokovoy <abokovoy@redhat.commailto:abokovoy@redhat.com> wrote:
On Mon, 23 Sep 2019, Vinícius Ferrão via FreeIPA-users wrote: Florence and Angus, thanks for the replies.
xCAT definitely can run scripts at boot time. And the kickstart method seems to be the way to go. But I sill have some questions:
The nodes are stateless, so in a reboot all the configuration is lost and get back from the image. FreeIPA configuration will be lost and then restarted. Which appears to be ok. But there are two issues:
* The password for “joining” the FreeIPA domain that expires after the first use * The necessity of the hostname on the ipa-client-install command: hostname=client.example.comhttp://client.example.com http://client.example.com/
With this two things I think we are unable to move forward, so the first question is:
1. Do I really need this password? Or better, the password can be permanent? It’s a “closed” system, so in terms of security I think there’s no problem. Please check ipa-client-install manual page. It has all explanations for methods of enrollment. You can create a special user that has privileges to create machines and enroll them and record the user's credentials in the kickstart file.
I was worried about the RTM but I really can’t find the exact answer. That’s why I came to the list. Searching a little but further, I came across the Forced Re-enrollment page and I think you’re mentioning this one, right? https://www.freeipa.org/page/V3/Forced_client_re-enrollment
But in this page it says about the OTP to primary join the FreeIPA domain, but I can’t use another OTP to do the re-enrollment. Is this expected?
The only was to successfully re-enroll a machine is passing the Keytab or passing admin username and password.
With this in mind: * Can I recover the Keytab directly from the server and try to send it to the new booted machine to avoid passing user/pass combination? * If not is it possible to have a service account to do this?
About the service accounts, it’s little confusing in the documentation either. There’s something in this link, but I can’t be sure if it’s the same thing: https://www.freeipa.org/page/HowTo/LDAP
2. Ipa-client-install can’t use the hostname of the node automatically? Do I really need to fill the hostname? Because this kills the ideia of a generic image. This is also covered in the man page. In short, there is no need to supply hostname explicitly, it will be discovered.
Thanks, this one I completely missed:
--hostname The hostname of this machine (FQDN). If specified, the hostname will be set and the system configuration will be updated to persist over reboot. By default a nodename result from uname(2) is used.
Thank you all guys.
On 23 Sep 2019, at 04:04, Florence Blanc-Renaud <flo@redhat.commailto:flo@redhat.com> wrote:
On 9/23/19 1:10 AM, Vinícius Ferrão via FreeIPA-users wrote: Hello, the subject of the message may sound a little bit strange, but let me explain what I’m trying to do. I have a machine with an provisioner (xCAT) that is able to boot and control different types of computer nodes. A stateless node is just a machine that boots over the network from a shared image on the server. What I’m trying to do? Join those stateless nodes to FreeIPA Server. To do this, I’m aware that I can’t just run freeipa-client-install on the image chroot, since it will not behave as expected. At this point xCAT (the provisioner) can create the DNS registers of the stateless nodes on FreeIPA integrated DNS (using TSIG keys). But I need to properly join the nodes to the server. There’s a way to manually register the nodes on the server? And about the users? How to enable them? Just Configure SSSD on the image and it should be fine? The certificates, client certificates and things like this? There’s something that I need to do? Automount? Any help is really appreciated. Thanks, _______________________________________________ FreeIPA-users mailing list -- freeipa-users@lists.fedorahosted.orgmailto:freeipa-users@lists.fedorahosted.org To unsubscribe send an email to freeipa-users-leave@lists.fedorahosted.orgmailto:freeipa-users-leave@lists.fedorahosted.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedorahosted.org/archives/list/freeipa-users@lists.fedorahoste...
Hi, xCAT probably offers you the possibility to run a custom script at the end of the installation. If it's the case, you can use a workflow similar to what is described in "Setting up an IdM Client Through Kickstart" [1]. You need to create a client host entry first, and the custom script on the client will call ipa-client-install.
HTH, flo
[1] https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/htm...
-- / Alexander Bokovoy Sr. Principal Software Engineer Security / Identity Management Engineering Red Hat Limited, Finland
Vinícius Ferrão via FreeIPA-users wrote:
Hello all,
On 23 Sep 2019, at 12:59, Alexander Bokovoy <abokovoy@redhat.com mailto:abokovoy@redhat.com> wrote:
On Mon, 23 Sep 2019, Vinícius Ferrão via FreeIPA-users wrote:
Florence and Angus, thanks for the replies.
xCAT definitely can run scripts at boot time. And the kickstart method seems to be the way to go. But I sill have some questions:
The nodes are stateless, so in a reboot all the configuration is lost and get back from the image. FreeIPA configuration will be lost and then restarted. Which appears to be ok. But there are two issues:
- The password for “joining” the FreeIPA domain that expires after
the first use
- The necessity of the hostname on the ipa-client-install command:
hostname=client.example.com http://client.example.com http://client.example.com/
With this two things I think we are unable to move forward, so the first question is:
- Do I really need this password? Or better, the password can be
permanent? It’s a “closed” system, so in terms of security I think there’s no problem.
Please check ipa-client-install manual page. It has all explanations for methods of enrollment. You can create a special user that has privileges to create machines and enroll them and record the user's credentials in the kickstart file.
I was worried about the RTM but I really can’t find the exact answer. That’s why I came to the list. Searching a little but further, I came across the Forced Re-enrollment page and I think you’re mentioning this one, right? https://www.freeipa.org/page/V3/Forced_client_re-enrollment
But in this page it says about the OTP to primary join the FreeIPA domain, but I can’t use another OTP to do the re-enrollment. Is this expected?
Did you get an error about unenrolling? You probably need to call host-disable to mark it as unenrolled, then you can set a new OTP and enroll. If, when you decommission the machine, you call ipa-client-install --uninstall the host-disable should happen automatically IIRC
The only was to successfully re-enroll a machine is passing the Keytab or passing admin username and password.
With this in mind:
- Can I recover the Keytab directly from the server and try to send it
to the new booted machine to avoid passing user/pass combination?
- If not is it possible to have a service account to do this?
I don't think you can recover the keytab per se but I guess there is no reason you couldn't run ipa-getkeytab to get a new one and use that to enroll.
About the service accounts, it’s little confusing in the documentation either. There’s something in this link, but I can’t be sure if it’s the same thing: https://www.freeipa.org/page/HowTo/LDAP
Service account to do what?
rob
- Ipa-client-install can’t use the hostname of the node automatically?
Do I really need to fill the hostname? Because this kills the ideia of a generic image.
This is also covered in the man page. In short, there is no need to supply hostname explicitly, it will be discovered.
Thanks, this one I completely missed:
--hostname The hostname of this machine (FQDN). If specified, the hostname will be set and the system configuration will be updated to persist over reboot. By default a nodename result from uname(2) is used.
Thank you all guys.
On 23 Sep 2019, at 04:04, Florence Blanc-Renaud <flo@redhat.com mailto:flo@redhat.com> wrote:
On 9/23/19 1:10 AM, Vinícius Ferrão via FreeIPA-users wrote:
Hello, the subject of the message may sound a little bit strange, but let me explain what I’m trying to do. I have a machine with an provisioner (xCAT) that is able to boot and control different types of computer nodes. A stateless node is just a machine that boots over the network from a shared image on the server. What I’m trying to do? Join those stateless nodes to FreeIPA Server. To do this, I’m aware that I can’t just run freeipa-client-install on the image chroot, since it will not behave as expected. At this point xCAT (the provisioner) can create the DNS registers of the stateless nodes on FreeIPA integrated DNS (using TSIG keys). But I need to properly join the nodes to the server. There’s a way to manually register the nodes on the server? And about the users? How to enable them? Just Configure SSSD on the image and it should be fine? The certificates, client certificates and things like this? There’s something that I need to do? Automount? Any help is really appreciated. Thanks, _______________________________________________ FreeIPA-users mailing list -- freeipa-users@lists.fedorahosted.org mailto:freeipa-users@lists.fedorahosted.org To unsubscribe send an email to freeipa-users-leave@lists.fedorahosted.org mailto:freeipa-users-leave@lists.fedorahosted.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedorahosted.org/archives/list/freeipa-users@lists.fedorahoste...
Hi, xCAT probably offers you the possibility to run a custom script at the end of the installation. If it's the case, you can use a workflow similar to what is described in "Setting up an IdM Client Through Kickstart" [1]. You need to create a client host entry first, and the custom script on the client will call ipa-client-install.
HTH, flo
[1] https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/htm...
-- / Alexander Bokovoy Sr. Principal Software Engineer Security / Identity Management Engineering Red Hat Limited, Finland
FreeIPA-users mailing list -- freeipa-users@lists.fedorahosted.org To unsubscribe send an email to freeipa-users-leave@lists.fedorahosted.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedorahosted.org/archives/list/freeipa-users@lists.fedorahoste...
Hello,
First of all thanks for everyone helping out. Answers inline.
On 24 Sep 2019, at 20:48, Rob Crittenden <rcritten@redhat.commailto:rcritten@redhat.com> wrote:
Vinícius Ferrão via FreeIPA-users wrote: Hello all,
On 23 Sep 2019, at 12:59, Alexander Bokovoy <abokovoy@redhat.commailto:abokovoy@redhat.com mailto:abokovoy@redhat.com> wrote:
On Mon, 23 Sep 2019, Vinícius Ferrão via FreeIPA-users wrote: Florence and Angus, thanks for the replies.
xCAT definitely can run scripts at boot time. And the kickstart method seems to be the way to go. But I sill have some questions:
The nodes are stateless, so in a reboot all the configuration is lost and get back from the image. FreeIPA configuration will be lost and then restarted. Which appears to be ok. But there are two issues:
* The password for “joining” the FreeIPA domain that expires after the first use * The necessity of the hostname on the ipa-client-install command: hostname=client.example.comhttp://client.example.com/ <http://client.example.comhttp://client.example.com/> http://client.example.com/
With this two things I think we are unable to move forward, so the first question is:
1. Do I really need this password? Or better, the password can be permanent? It’s a “closed” system, so in terms of security I think there’s no problem. Please check ipa-client-install manual page. It has all explanations for methods of enrollment. You can create a special user that has privileges to create machines and enroll them and record the user's credentials in the kickstart file.
I was worried about the RTM but I really can’t find the exact answer. That’s why I came to the list. Searching a little but further, I came across the Forced Re-enrollment page and I think you’re mentioning this one, right? https://www.freeipa.org/page/V3/Forced_client_re-enrollment
But in this page it says about the OTP to primary join the FreeIPA domain, but I can’t use another OTP to do the re-enrollment. Is this expected?
Did you get an error about unenrolling? You probably need to call host-disable to mark it as unenrolled, then you can set a new OTP and enroll. If, when you decommission the machine, you call ipa-client-install --uninstall the host-disable should happen automatically IIRC
So, the problem is the unenrolling part. I don’t have any automatic machanism (none that I’m aware of) to unenroll the compute nodes (the stateless machines).
At this moment the configuration is working with something being run at boot time, every time it buts: ipa-client-install —domain=cluster.example.comhttp://cluster.example.com -p admin -w adminpassword --force-join -U
Even for new hosts (never registered ones) it works correctly.
The only thing that bugs me is the plaintext password of the admin account in the script. What I’m trying to achieve is avoid this password.
What I have?
During node registration I can register it manually on FreeIPA if needed. At this moment FreeIPA DNS is handled by xCAT with it’s makedns command, that basically do a TSIG update on FreeIPA DNS. So this is the only thing done by the server inside FreeIPA. For this process there’s no need to kinit anything. Which is good.
That’s it.
The only was to successfully re-enroll a machine is passing the Keytab or passing admin username and password.
With this in mind: * Can I recover the Keytab directly from the server and try to send it to the new booted machine to avoid passing user/pass combination? * If not is it possible to have a service account to do this?
I don't think you can recover the keytab per se but I guess there is no reason you couldn't run ipa-getkeytab to get a new one and use that to enroll.
I was able to recover the host Keytab directly from the server. I’ve done this:
ipa-getkeytab -p host/hpclab01.cluster.iq.ufrj.br@CLUSTER.IQ.UFRJ.BRmailto:host/hpclab01.cluster.iq.ufrj.br@CLUSTER.IQ.UFRJ.BR -k /tmp/host.keytab
The problem here is that I need to kinit as admin…
If I had a Service Principal to do that would be good, because I can try workaround the re-enroll process with this. But I wasn’t able to, and I don’t know if FreeIPA supports this.
About the service accounts, it’s little confusing in the documentation either. There’s something in this link, but I can’t be sure if it’s the same thing: https://www.freeipa.org/page/HowTo/LDAP
Service account to do what?
The service account would be a last resort if everything else fails to at lease hide the admin account on the script to re-enroll the stateless nodes.
Thanks!!!!!!!
rob
2. Ipa-client-install can’t use the hostname of the node automatically? Do I really need to fill the hostname? Because this kills the ideia of a generic image. This is also covered in the man page. In short, there is no need to supply hostname explicitly, it will be discovered.
Thanks, this one I completely missed:
--hostname The hostname of this machine (FQDN). If specified, the hostname will be set and the system configuration will be updated to persist over reboot. By default a nodename result from uname(2) is used.
Thank you all guys.
On 23 Sep 2019, at 04:04, Florence Blanc-Renaud <flo@redhat.commailto:flo@redhat.com mailto:flo@redhat.com> wrote:
On 9/23/19 1:10 AM, Vinícius Ferrão via FreeIPA-users wrote: Hello, the subject of the message may sound a little bit strange, but let me explain what I’m trying to do. I have a machine with an provisioner (xCAT) that is able to boot and control different types of computer nodes. A stateless node is just a machine that boots over the network from a shared image on the server. What I’m trying to do? Join those stateless nodes to FreeIPA Server. To do this, I’m aware that I can’t just run freeipa-client-install on the image chroot, since it will not behave as expected. At this point xCAT (the provisioner) can create the DNS registers of the stateless nodes on FreeIPA integrated DNS (using TSIG keys). But I need to properly join the nodes to the server. There’s a way to manually register the nodes on the server? And about the users? How to enable them? Just Configure SSSD on the image and it should be fine? The certificates, client certificates and things like this? There’s something that I need to do? Automount? Any help is really appreciated. Thanks, _______________________________________________ FreeIPA-users mailing list -- freeipa-users@lists.fedorahosted.orgmailto:freeipa-users@lists.fedorahosted.org mailto:freeipa-users@lists.fedorahosted.org To unsubscribe send an email to freeipa-users-leave@lists.fedorahosted.orgmailto:freeipa-users-leave@lists.fedorahosted.org mailto:freeipa-users-leave@lists.fedorahosted.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedorahosted.org/archives/list/freeipa-users@lists.fedorahoste...
Hi, xCAT probably offers you the possibility to run a custom script at the end of the installation. If it's the case, you can use a workflow similar to what is described in "Setting up an IdM Client Through Kickstart" [1]. You need to create a client host entry first, and the custom script on the client will call ipa-client-install.
HTH, flo
[1] https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/htm...
-- / Alexander Bokovoy Sr. Principal Software Engineer Security / Identity Management Engineering Red Hat Limited, Finland
_______________________________________________ FreeIPA-users mailing list -- freeipa-users@lists.fedorahosted.orgmailto:freeipa-users@lists.fedorahosted.org To unsubscribe send an email to freeipa-users-leave@lists.fedorahosted.orgmailto:freeipa-users-leave@lists.fedorahosted.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedorahosted.org/archives/list/freeipa-users@lists.fedorahoste...
Vinícius Ferrão wrote:
Hello,
First of all thanks for everyone helping out. Answers inline.
On 24 Sep 2019, at 20:48, Rob Crittenden <rcritten@redhat.com mailto:rcritten@redhat.com> wrote:
Vinícius Ferrão via FreeIPA-users wrote:
Hello all,
On 23 Sep 2019, at 12:59, Alexander Bokovoy <abokovoy@redhat.com mailto:abokovoy@redhat.com mailto:abokovoy@redhat.com> wrote:
On Mon, 23 Sep 2019, Vinícius Ferrão via FreeIPA-users wrote:
Florence and Angus, thanks for the replies.
xCAT definitely can run scripts at boot time. And the kickstart method seems to be the way to go. But I sill have some questions:
The nodes are stateless, so in a reboot all the configuration is lost and get back from the image. FreeIPA configuration will be lost and then restarted. Which appears to be ok. But there are two issues:
- The password for “joining” the FreeIPA domain that expires after
the first use
- The necessity of the hostname on the ipa-client-install command:
hostname=client.example.com http://client.example.com/ <http://client.example.com http://client.example.com/> http://client.example.com/
With this two things I think we are unable to move forward, so the first question is:
- Do I really need this password? Or better, the password can be
permanent? It’s a “closed” system, so in terms of security I think there’s no problem.
Please check ipa-client-install manual page. It has all explanations for methods of enrollment. You can create a special user that has privileges to create machines and enroll them and record the user's credentials in the kickstart file.
I was worried about the RTM but I really can’t find the exact answer. That’s why I came to the list. Searching a little but further, I came across the Forced Re-enrollment page and I think you’re mentioning this one, right? https://www.freeipa.org/page/V3/Forced_client_re-enrollment
But in this page it says about the OTP to primary join the FreeIPA domain, but I can’t use another OTP to do the re-enrollment. Is this expected?
Did you get an error about unenrolling? You probably need to call host-disable to mark it as unenrolled, then you can set a new OTP and enroll. If, when you decommission the machine, you call ipa-client-install --uninstall the host-disable should happen automatically IIRC
So, the problem is the unenrolling part. I don’t have any automatic machanism (none that I’m aware of) to unenroll the compute nodes (the stateless machines).
Ok, I'm not at all familiar with xCAT so don't know how it does its provisioning. You mentioned makedns, so perhaps there is a way to inject commands prior to instantiating the node?
Typically for this type of provisioning (Foreman, OpenStack novajoin) there is an outside controller that is privileged and can manage IPA entries. These generally do:
- host-add (if needed), or host-disable if the node was enrolled - set OTP
The OTP is then passed into the provisioned system (kickstart in Foreman, cloud-init in novajoin).
The newly provisioned machine then calls ipa-client-install using the provided OTP.
At this moment the configuration is working with something being run at boot time, every time it buts: ipa-client-install —domain=cluster.example.com http://cluster.example.com -p admin -w adminpassword --force-join -U
Even for new hosts (never registered ones) it works correctly.
The only thing that bugs me is the plaintext password of the admin account in the script. What I’m trying to achieve is avoid this password.
Worst case you can create a separate user and delegate them the ability to provision hosts and pass in that password.
What I have?
During node registration I can register it manually on FreeIPA if needed. At this moment FreeIPA DNS is handled by xCAT with it’s makedns command, that basically do a TSIG update on FreeIPA DNS. So this is the only thing done by the server inside FreeIPA. For this process there’s no need to kinit anything. Which is good.
That’s it.
The only was to successfully re-enroll a machine is passing the Keytab or passing admin username and password.
With this in mind:
- Can I recover the Keytab directly from the server and try to send it
to the new booted machine to avoid passing user/pass combination?
- If not is it possible to have a service account to do this?
I don't think you can recover the keytab per se but I guess there is no reason you couldn't run ipa-getkeytab to get a new one and use that to enroll.
I was able to recover the host Keytab directly from the server. I’ve done this:
ipa-getkeytab -p host/hpclab01.cluster.iq.ufrj.br@CLUSTER.IQ.UFRJ.BR mailto:host/hpclab01.cluster.iq.ufrj.br@CLUSTER.IQ.UFRJ.BR -k /tmp/host.keytab
The problem here is that I need to kinit as admin…
If I had a Service Principal to do that would be good, because I can try workaround the re-enroll process with this. But I wasn’t able to, and I don’t know if FreeIPA supports this.
As I mentioned you can delegate to a user (or service principal) the ability to do enrollment.
About the service accounts, it’s little confusing in the documentation either. There’s something in this link, but I can’t be sure if it’s the same thing: https://www.freeipa.org/page/HowTo/LDAP
Service account to do what?
The service account would be a last resort if everything else fails to at lease hide the admin account on the script to re-enroll the stateless nodes.
A service account is the context of IPA is generally just an LDAP bind account. I'm not sure it is appropriate in this context.
rob
Thanks!!!!!!!
rob
- Ipa-client-install can’t use the hostname of the node automatically?
Do I really need to fill the hostname? Because this kills the ideia of a generic image.
This is also covered in the man page. In short, there is no need to supply hostname explicitly, it will be discovered.
Thanks, this one I completely missed:
--hostname The hostname of this machine (FQDN). If specified, the hostname will be set and the system configuration will be updated to persist over reboot. By default a nodename result from uname(2) is used.
Thank you all guys.
On 23 Sep 2019, at 04:04, Florence Blanc-Renaud <flo@redhat.com mailto:flo@redhat.com mailto:flo@redhat.com> wrote:
On 9/23/19 1:10 AM, Vinícius Ferrão via FreeIPA-users wrote: > Hello, the subject of the message may sound a little bit strange, > but let me explain what I’m trying to do. > I have a machine with an provisioner (xCAT) that is able to boot > and control different types of computer nodes. A stateless node is > just a machine that boots over the network from a shared image on > the server. > What I’m trying to do? > Join those stateless nodes to FreeIPA Server. > To do this, I’m aware that I can’t just run freeipa-client-install > on the image chroot, since it will not behave as expected. > At this point xCAT (the provisioner) can create the DNS registers > of the stateless nodes on FreeIPA integrated DNS (using TSIG keys). > But I need to properly join the nodes to the server. > There’s a way to manually register the nodes on the server? > And about the users? How to enable them? Just Configure SSSD on the > image and it should be fine? > The certificates, client certificates and things like this? There’s > something that I need to do? > Automount? > Any help is really appreciated. > Thanks, > _______________________________________________ > FreeIPA-users mailing list > -- freeipa-users@lists.fedorahosted.org > mailto:freeipa-users@lists.fedorahosted.org > mailto:freeipa-users@lists.fedorahosted.org > To unsubscribe send an email to > freeipa-users-leave@lists.fedorahosted.org > mailto:freeipa-users-leave@lists.fedorahosted.org > mailto:freeipa-users-leave@lists.fedorahosted.org > Fedora Code of Conduct: > https://docs.fedoraproject.org/en-US/project/code-of-conduct/ > List Guidelines: > https://fedoraproject.org/wiki/Mailing_list_guidelines > List Archives: > https://lists.fedorahosted.org/archives/list/freeipa-users@lists.fedorahoste...
Hi, xCAT probably offers you the possibility to run a custom script at the end of the installation. If it's the case, you can use a workflow similar to what is described in "Setting up an IdM Client Through Kickstart" [1]. You need to create a client host entry first, and the custom script on the client will call ipa-client-install.
HTH, flo
[1] https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/htm...
-- / Alexander Bokovoy Sr. Principal Software Engineer Security / Identity Management Engineering Red Hat Limited, Finland
FreeIPA-users mailing list -- freeipa-users@lists.fedorahosted.org mailto:freeipa-users@lists.fedorahosted.org To unsubscribe send an email to freeipa-users-leave@lists.fedorahosted.org mailto:freeipa-users-leave@lists.fedorahosted.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedorahosted.org/archives/list/freeipa-users@lists.fedorahoste...
On 25 Sep 2019, at 17:41, Rob Crittenden <rcritten@redhat.commailto:rcritten@redhat.com> wrote:
Vinícius Ferrão wrote: Hello,
First of all thanks for everyone helping out. Answers inline.
On 24 Sep 2019, at 20:48, Rob Crittenden <rcritten@redhat.commailto:rcritten@redhat.com mailto:rcritten@redhat.com> wrote:
Vinícius Ferrão via FreeIPA-users wrote: Hello all,
On 23 Sep 2019, at 12:59, Alexander Bokovoy <abokovoy@redhat.commailto:abokovoy@redhat.com mailto:abokovoy@redhat.com mailto:abokovoy@redhat.com> wrote:
On Mon, 23 Sep 2019, Vinícius Ferrão via FreeIPA-users wrote: Florence and Angus, thanks for the replies.
xCAT definitely can run scripts at boot time. And the kickstart method seems to be the way to go. But I sill have some questions:
The nodes are stateless, so in a reboot all the configuration is lost and get back from the image. FreeIPA configuration will be lost and then restarted. Which appears to be ok. But there are two issues:
* The password for “joining” the FreeIPA domain that expires after the first use * The necessity of the hostname on the ipa-client-install command: hostname=client.example.comhttp://client.example.com http://client.example.com/ <http://client.example.com http://client.example.com/> http://client.example.com/
With this two things I think we are unable to move forward, so the first question is:
1. Do I really need this password? Or better, the password can be permanent? It’s a “closed” system, so in terms of security I think there’s no problem. Please check ipa-client-install manual page. It has all explanations for methods of enrollment. You can create a special user that has privileges to create machines and enroll them and record the user's credentials in the kickstart file.
I was worried about the RTM but I really can’t find the exact answer. That’s why I came to the list. Searching a little but further, I came across the Forced Re-enrollment page and I think you’re mentioning this one, right? https://www.freeipa.org/page/V3/Forced_client_re-enrollment
But in this page it says about the OTP to primary join the FreeIPA domain, but I can’t use another OTP to do the re-enrollment. Is this expected?
Did you get an error about unenrolling? You probably need to call host-disable to mark it as unenrolled, then you can set a new OTP and enroll. If, when you decommission the machine, you call ipa-client-install --uninstall the host-disable should happen automatically IIRC
So, the problem is the unenrolling part. I don’t have any automatic machanism (none that I’m aware of) to unenroll the compute nodes (the stateless machines).
Ok, I'm not at all familiar with xCAT so don't know how it does its provisioning. You mentioned makedns, so perhaps there is a way to inject commands prior to instantiating the node?
Typically for this type of provisioning (Foreman, OpenStack novajoin) there is an outside controller that is privileged and can manage IPA entries. These generally do:
- host-add (if needed), or host-disable if the node was enrolled - set OTP
The OTP is then passed into the provisioned system (kickstart in Foreman, cloud-init in novajoin).
The newly provisioned machine then calls ipa-client-install using the provided OTP.
Hi Rob,
During the node initial configuration I must inform xCAT things like MAC address, hostname, IP, etc. So this is made with some xCAT commands. One of them builds the DNS with this data, it’s the makedns command.
So yes, I can run commands on the headnode to manually host-add and set the OTP. This is good.
The problem is later on. The node boots and everything is OK, but in the case of a reboot of the stateless node it will lose the configuration and since the machine is already configured there’s no way back to detected this and do a host-add again or something similar.
That’s why I’ve done that atrocious force-join with the admin password, it works in both cases. New nodes and already enrolled nodes.
At this moment the configuration is working with something being run at boot time, every time it buts: ipa-client-install —domain=cluster.example.comhttp://cluster.example.com http://cluster.example.com -p admin -w adminpassword --force-join -U
Even for new hosts (never registered ones) it works correctly.
The only thing that bugs me is the plaintext password of the admin account in the script. What I’m trying to achieve is avoid this password. Worst case you can create a separate user and delegate them the ability to provision hosts and pass in that password.
So what I was talking about service account actually is a normal user account with some privileges. Sorry for the mess.
There’s a way to make this a principal instead? I can put some generic things in the stateless image so it can be sufficient to at least re-enroll itself during boot without any password.
To do this I just need to clarify how it works and if it’s viable, or even if this makes sense.
ipa service-add-principal can create service principal for xCAT, but I was not able to add permissions to this principal. Trying to figure out with this documentation: https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/htm...
If you have any ideia it’s extremely welcoming.
What I have?
During node registration I can register it manually on FreeIPA if needed. At this moment FreeIPA DNS is handled by xCAT with it’s makedns command, that basically do a TSIG update on FreeIPA DNS. So this is the only thing done by the server inside FreeIPA. For this process there’s no need to kinit anything. Which is good.
That’s it.
The only was to successfully re-enroll a machine is passing the Keytab or passing admin username and password.
With this in mind: * Can I recover the Keytab directly from the server and try to send it to the new booted machine to avoid passing user/pass combination? * If not is it possible to have a service account to do this?
I don't think you can recover the keytab per se but I guess there is no reason you couldn't run ipa-getkeytab to get a new one and use that to enroll.
I was able to recover the host Keytab directly from the server. I’ve done this:
ipa-getkeytab -p host/hpclab01.cluster.iq.ufrj.br@CLUSTER.IQ.UFRJ.BRmailto:host/hpclab01.cluster.iq.ufrj.br@CLUSTER.IQ.UFRJ.BR mailto:host/hpclab01.cluster.iq.ufrj.br@CLUSTER.IQ.UFRJ.BR -k /tmp/host.keytab
The problem here is that I need to kinit as admin…
If I had a Service Principal to do that would be good, because I can try workaround the re-enroll process with this. But I wasn’t able to, and I don’t know if FreeIPA supports this.
As I mentioned you can delegate to a user (or service principal) the ability to do enrollment.
Ok!
About the service accounts, it’s little confusing in the documentation either. There’s something in this link, but I can’t be sure if it’s the same thing: https://www.freeipa.org/page/HowTo/LDAP
Service account to do what?
The service account would be a last resort if everything else fails to at lease hide the admin account on the script to re-enroll the stateless nodes.
A service account is the context of IPA is generally just an LDAP bind account. I'm not sure it is appropriate in this context.
Sorry for the confusion with the terms here.
Thanks,
rob
Thanks!!!!!!!
rob
2. Ipa-client-install can’t use the hostname of the node automatically? Do I really need to fill the hostname? Because this kills the ideia of a generic image. This is also covered in the man page. In short, there is no need to supply hostname explicitly, it will be discovered.
Thanks, this one I completely missed:
--hostname The hostname of this machine (FQDN). If specified, the hostname will be set and the system configuration will be updated to persist over reboot. By default a nodename result from uname(2) is used.
Thank you all guys.
On 23 Sep 2019, at 04:04, Florence Blanc-Renaud <flo@redhat.commailto:flo@redhat.com mailto:flo@redhat.com mailto:flo@redhat.com> wrote:
On 9/23/19 1:10 AM, Vinícius Ferrão via FreeIPA-users wrote: Hello, the subject of the message may sound a little bit strange, but let me explain what I’m trying to do. I have a machine with an provisioner (xCAT) that is able to boot and control different types of computer nodes. A stateless node is just a machine that boots over the network from a shared image on the server. What I’m trying to do? Join those stateless nodes to FreeIPA Server. To do this, I’m aware that I can’t just run freeipa-client-install on the image chroot, since it will not behave as expected. At this point xCAT (the provisioner) can create the DNS registers of the stateless nodes on FreeIPA integrated DNS (using TSIG keys). But I need to properly join the nodes to the server. There’s a way to manually register the nodes on the server? And about the users? How to enable them? Just Configure SSSD on the image and it should be fine? The certificates, client certificates and things like this? There’s something that I need to do? Automount? Any help is really appreciated. Thanks, _______________________________________________ FreeIPA-users mailing list -- freeipa-users@lists.fedorahosted.orgmailto:freeipa-users@lists.fedorahosted.org mailto:freeipa-users@lists.fedorahosted.org mailto:freeipa-users@lists.fedorahosted.org To unsubscribe send an email to freeipa-users-leave@lists.fedorahosted.orgmailto:freeipa-users-leave@lists.fedorahosted.org mailto:freeipa-users-leave@lists.fedorahosted.org mailto:freeipa-users-leave@lists.fedorahosted.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedorahosted.org/archives/list/freeipa-users@lists.fedorahoste...
Hi, xCAT probably offers you the possibility to run a custom script at the end of the installation. If it's the case, you can use a workflow similar to what is described in "Setting up an IdM Client Through Kickstart" [1]. You need to create a client host entry first, and the custom script on the client will call ipa-client-install.
HTH, flo
[1] https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/htm...
-- / Alexander Bokovoy Sr. Principal Software Engineer Security / Identity Management Engineering Red Hat Limited, Finland
_______________________________________________ FreeIPA-users mailing list -- freeipa-users@lists.fedorahosted.orgmailto:freeipa-users@lists.fedorahosted.org mailto:freeipa-users@lists.fedorahosted.org To unsubscribe send an email to freeipa-users-leave@lists.fedorahosted.orgmailto:freeipa-users-leave@lists.fedorahosted.org mailto:freeipa-users-leave@lists.fedorahosted.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedorahosted.org/archives/list/freeipa-users@lists.fedorahoste...
Hmm, yes I see the problem, when a previously registered node reboots, all the local configuration is lost however it still has entries in IPA server.
I've not tried running ipa-client-install on such a node but it sounds like you have and the --force option is achieving what you desire.
Alternatively, you could identify all the configuration files that the ipa-client-install command updates locally and move them to some stateful filesystem (NFS for example) and sym-link back (I'm just thinking out loud - I've successfully done such things on other topics before now!) From memory, you would need at least:
/etc/krb5.conf /etc/krb5.keytab /etc/ipa/default.conf /etc/sssd/sssd.conf
I'm keeping in mind that the DNS is still correct as per the original names initially registered in IPA ...
You can create a separate account for registering/adding hosts to IPA with restricted privileges to do just that.
Regards Angus
________________________________ From: Vinícius Ferrão via FreeIPA-users freeipa-users@lists.fedorahosted.org Sent: 26 September 2019 01:20 To: Rob Crittenden rcritten@redhat.com Cc: FreeIPA users list freeipa-users@lists.fedorahosted.org; Alexander Bokovoy abokovoy@redhat.com; Florence Blanc-Renaud flo@redhat.com; Vinícius Ferrão ferrao@versatushpc.com.br Subject: [Freeipa-users] Re: Manually join machines in stateless environment
On 25 Sep 2019, at 17:41, Rob Crittenden <rcritten@redhat.commailto:rcritten@redhat.com> wrote:
Vinícius Ferrão wrote: Hello,
First of all thanks for everyone helping out. Answers inline.
On 24 Sep 2019, at 20:48, Rob Crittenden <rcritten@redhat.commailto:rcritten@redhat.com mailto:rcritten@redhat.com> wrote:
Vinícius Ferrão via FreeIPA-users wrote: Hello all,
On 23 Sep 2019, at 12:59, Alexander Bokovoy <abokovoy@redhat.commailto:abokovoy@redhat.com mailto:abokovoy@redhat.com mailto:abokovoy@redhat.com> wrote:
On Mon, 23 Sep 2019, Vinícius Ferrão via FreeIPA-users wrote: Florence and Angus, thanks for the replies.
xCAT definitely can run scripts at boot time. And the kickstart method seems to be the way to go. But I sill have some questions:
The nodes are stateless, so in a reboot all the configuration is lost and get back from the image. FreeIPA configuration will be lost and then restarted. Which appears to be ok. But there are two issues:
* The password for “joining” the FreeIPA domain that expires after the first use * The necessity of the hostname on the ipa-client-install command: hostname=client.example.comhttps://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fclient.example.com&data=02%7C01%7C%7C286b6634e76f4f89fd7808d7420f0210%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637050504537208792&sdata=uysHRhUOZ08RkTA%2B66NZDXhWRgNfK7usQNUrHkRwCW8%3D&reserved=0 <http://client.example.com/https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fclient.example.com%2F&data=02%7C01%7C%7C286b6634e76f4f89fd7808d7420f0210%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637050504537218803&sdata=xtCsGZYOAym%2FfAluig%2FQI434ZXPJ0b%2FQwb7PrkJPnM8%3D&reserved=0> <http://client.example.comhttps://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fclient.example.com&data=02%7C01%7C%7C286b6634e76f4f89fd7808d7420f0210%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637050504537228808&sdata=qN5AW5FnsJgPgRKRyfN6FGQR%2BStcgq0IHEXHBc8oGpE%3D&reserved=0 <http://client.example.com/https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fclient.example.com%2F&data=02%7C01%7C%7C286b6634e76f4f89fd7808d7420f0210%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637050504537238819&sdata=vzwHJ%2BfzM84GEphQ2BJFIadvbk8Ks%2FytE3ybj%2BY46Ks%3D&reserved=0>> <http://client.example.com/https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fclient.example.com%2F&data=02%7C01%7C%7C286b6634e76f4f89fd7808d7420f0210%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637050504537238819&sdata=vzwHJ%2BfzM84GEphQ2BJFIadvbk8Ks%2FytE3ybj%2BY46Ks%3D&reserved=0>
With this two things I think we are unable to move forward, so the first question is:
1. Do I really need this password? Or better, the password can be permanent? It’s a “closed” system, so in terms of security I think there’s no problem. Please check ipa-client-install manual page. It has all explanations for methods of enrollment. You can create a special user that has privileges to create machines and enroll them and record the user's credentials in the kickstart file.
I was worried about the RTM but I really can’t find the exact answer. That’s why I came to the list. Searching a little but further, I came across the Forced Re-enrollment page and I think you’re mentioning this one, right? https://www.freeipa.org/page/V3/Forced_client_re-enrollmenthttps://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.freeipa.org%2Fpage%2FV3%2FForced_client_re-enrollment&data=02%7C01%7C%7C286b6634e76f4f89fd7808d7420f0210%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637050504537248824&sdata=SDVUj0tqaP3jq4uDSgXEgehj14%2B2G%2BusYSF2YmrKxXM%3D&reserved=0
But in this page it says about the OTP to primary join the FreeIPA domain, but I can’t use another OTP to do the re-enrollment. Is this expected?
Did you get an error about unenrolling? You probably need to call host-disable to mark it as unenrolled, then you can set a new OTP and enroll. If, when you decommission the machine, you call ipa-client-install --uninstall the host-disable should happen automatically IIRC
So, the problem is the unenrolling part. I don’t have any automatic machanism (none that I’m aware of) to unenroll the compute nodes (the stateless machines).
Ok, I'm not at all familiar with xCAT so don't know how it does its provisioning. You mentioned makedns, so perhaps there is a way to inject commands prior to instantiating the node?
Typically for this type of provisioning (Foreman, OpenStack novajoin) there is an outside controller that is privileged and can manage IPA entries. These generally do:
- host-add (if needed), or host-disable if the node was enrolled - set OTP
The OTP is then passed into the provisioned system (kickstart in Foreman, cloud-init in novajoin).
The newly provisioned machine then calls ipa-client-install using the provided OTP.
Hi Rob,
During the node initial configuration I must inform xCAT things like MAC address, hostname, IP, etc. So this is made with some xCAT commands. One of them builds the DNS with this data, it’s the makedns command.
So yes, I can run commands on the headnode to manually host-add and set the OTP. This is good.
The problem is later on. The node boots and everything is OK, but in the case of a reboot of the stateless node it will lose the configuration and since the machine is already configured there’s no way back to detected this and do a host-add again or something similar.
That’s why I’ve done that atrocious force-join with the admin password, it works in both cases. New nodes and already enrolled nodes.
At this moment the configuration is working with something being run at boot time, every time it buts: ipa-client-install —domain=cluster.example.comhttps://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fcluster.example.com&data=02%7C01%7C%7C286b6634e76f4f89fd7808d7420f0210%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637050504537258835&sdata=rQ12mAMckNe3PJIJ1%2BWJHMP7pitljaL5vNN2iexQd%2BY%3D&reserved=0 <http://cluster.example.comhttps://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fcluster.example.com&data=02%7C01%7C%7C286b6634e76f4f89fd7808d7420f0210%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637050504537268846&sdata=r8bI5T%2BXwudwO2Wjh%2FycjP%2FoU4E2GyfU6NEBK4Z6yCI%3D&reserved=0> -p admin -w adminpassword --force-join -U
Even for new hosts (never registered ones) it works correctly.
The only thing that bugs me is the plaintext password of the admin account in the script. What I’m trying to achieve is avoid this password. Worst case you can create a separate user and delegate them the ability to provision hosts and pass in that password.
So what I was talking about service account actually is a normal user account with some privileges. Sorry for the mess.
There’s a way to make this a principal instead? I can put some generic things in the stateless image so it can be sufficient to at least re-enroll itself during boot without any password.
To do this I just need to clarify how it works and if it’s viable, or even if this makes sense.
ipa service-add-principal can create service principal for xCAT, but I was not able to add permissions to this principal. Trying to figure out with this documentation: https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/htm...https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Faccess.redhat.com%2Fdocumentation%2Fen-us%2Fred_hat_enterprise_linux%2F7%2Fhtml%2Flinux_domain_identity_authentication_and_policy_guide%2Fmanaging-kerberos-aliases&data=02%7C01%7C%7C286b6634e76f4f89fd7808d7420f0210%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637050504537278851&sdata=wj0penXMWB%2FzWRribigcYW2hM2m%2B6qTMqGpJWeAkhdY%3D&reserved=0
If you have any ideia it’s extremely welcoming.
What I have?
During node registration I can register it manually on FreeIPA if needed. At this moment FreeIPA DNS is handled by xCAT with it’s makedns command, that basically do a TSIG update on FreeIPA DNS. So this is the only thing done by the server inside FreeIPA. For this process there’s no need to kinit anything. Which is good.
That’s it.
The only was to successfully re-enroll a machine is passing the Keytab or passing admin username and password.
With this in mind: * Can I recover the Keytab directly from the server and try to send it to the new booted machine to avoid passing user/pass combination? * If not is it possible to have a service account to do this?
I don't think you can recover the keytab per se but I guess there is no reason you couldn't run ipa-getkeytab to get a new one and use that to enroll.
I was able to recover the host Keytab directly from the server. I’ve done this:
ipa-getkeytab -p host/hpclab01.cluster.iq.ufrj.br@CLUSTER.IQ.UFRJ.BRmailto:host/hpclab01.cluster.iq.ufrj.br@CLUSTER.IQ.UFRJ.BR mailto:host/hpclab01.cluster.iq.ufrj.br@CLUSTER.IQ.UFRJ.BR -k /tmp/host.keytab
The problem here is that I need to kinit as admin…
If I had a Service Principal to do that would be good, because I can try workaround the re-enroll process with this. But I wasn’t able to, and I don’t know if FreeIPA supports this.
As I mentioned you can delegate to a user (or service principal) the ability to do enrollment.
Ok!
About the service accounts, it’s little confusing in the documentation either. There’s something in this link, but I can’t be sure if it’s the same thing: https://www.freeipa.org/page/HowTo/LDAPhttps://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.freeipa.org%2Fpage%2FHowTo%2FLDAP&data=02%7C01%7C%7C286b6634e76f4f89fd7808d7420f0210%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637050504537288856&sdata=ibilBwKpIbBwc8ZK1u0oXenu%2F4BhXmX3FFvPgdP%2BaMY%3D&reserved=0
Service account to do what?
The service account would be a last resort if everything else fails to at lease hide the admin account on the script to re-enroll the stateless nodes.
A service account is the context of IPA is generally just an LDAP bind account. I'm not sure it is appropriate in this context.
Sorry for the confusion with the terms here.
Thanks,
rob
Thanks!!!!!!!
rob
2. Ipa-client-install can’t use the hostname of the node automatically? Do I really need to fill the hostname? Because this kills the ideia of a generic image. This is also covered in the man page. In short, there is no need to supply hostname explicitly, it will be discovered.
Thanks, this one I completely missed:
--hostname The hostname of this machine (FQDN). If specified, the hostname will be set and the system configuration will be updated to persist over reboot. By default a nodename result from uname(2) is used.
Thank you all guys.
On 23 Sep 2019, at 04:04, Florence Blanc-Renaud <flo@redhat.commailto:flo@redhat.com mailto:flo@redhat.com mailto:flo@redhat.com> wrote:
On 9/23/19 1:10 AM, Vinícius Ferrão via FreeIPA-users wrote: Hello, the subject of the message may sound a little bit strange, but let me explain what I’m trying to do. I have a machine with an provisioner (xCAT) that is able to boot and control different types of computer nodes. A stateless node is just a machine that boots over the network from a shared image on the server. What I’m trying to do? Join those stateless nodes to FreeIPA Server. To do this, I’m aware that I can’t just run freeipa-client-install on the image chroot, since it will not behave as expected. At this point xCAT (the provisioner) can create the DNS registers of the stateless nodes on FreeIPA integrated DNS (using TSIG keys). But I need to properly join the nodes to the server. There’s a way to manually register the nodes on the server? And about the users? How to enable them? Just Configure SSSD on the image and it should be fine? The certificates, client certificates and things like this? There’s something that I need to do? Automount? Any help is really appreciated. Thanks, _______________________________________________ FreeIPA-users mailing list -- freeipa-users@lists.fedorahosted.orgmailto:freeipa-users@lists.fedorahosted.org mailto:freeipa-users@lists.fedorahosted.org mailto:freeipa-users@lists.fedorahosted.org To unsubscribe send an email to freeipa-users-leave@lists.fedorahosted.orgmailto:freeipa-users-leave@lists.fedorahosted.org mailto:freeipa-users-leave@lists.fedorahosted.org mailto:freeipa-users-leave@lists.fedorahosted.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedorahosted.org/archives/list/freeipa-users@lists.fedorahoste...
Hi, xCAT probably offers you the possibility to run a custom script at the end of the installation. If it's the case, you can use a workflow similar to what is described in "Setting up an IdM Client Through Kickstart" [1]. You need to create a client host entry first, and the custom script on the client will call ipa-client-install.
HTH, flo
[1] https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/htm...https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Faccess.redhat.com%2Fdocumentation%2Fen-us%2Fred_hat_enterprise_linux%2F7%2Fhtml%2Flinux_domain_identity_authentication_and_policy_guide%2Fclient-kickstart&data=02%7C01%7C%7C286b6634e76f4f89fd7808d7420f0210%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637050504537298866&sdata=JZhsJ9uLnDo%2FNmohIpRfTsfhQzn5lQVMUEOzJf7myhA%3D&reserved=0
-- / Alexander Bokovoy Sr. Principal Software Engineer Security / Identity Management Engineering Red Hat Limited, Finland
_______________________________________________ FreeIPA-users mailing list -- freeipa-users@lists.fedorahosted.orgmailto:freeipa-users@lists.fedorahosted.org mailto:freeipa-users@lists.fedorahosted.org To unsubscribe send an email to freeipa-users-leave@lists.fedorahosted.orgmailto:freeipa-users-leave@lists.fedorahosted.org mailto:freeipa-users-leave@lists.fedorahosted.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdocs.fedoraproject.org%2Fen-US%2Fproject%2Fcode-of-conduct%2F&data=02%7C01%7C%7C286b6634e76f4f89fd7808d7420f0210%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637050504537308871&sdata=tk0q2qtsM2Clnk7S9fkFE2xHGmrrnFb%2B3HBjZgy0efc%3D&reserved=0 List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelineshttps://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Ffedoraproject.org%2Fwiki%2FMailing_list_guidelines&data=02%7C01%7C%7C286b6634e76f4f89fd7808d7420f0210%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637050504537318882&sdata=TSdBu%2Fsoz51iyG8z612FdufWeEb89RDr5YpQub3fXyc%3D&reserved=0 List Archives: https://lists.fedorahosted.org/archives/list/freeipa-users@lists.fedorahoste...https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.fedorahosted.org%2Farchives%2Flist%2Ffreeipa-users%40lists.fedorahosted.org&data=02%7C01%7C%7C286b6634e76f4f89fd7808d7420f0210%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637050504537328893&sdata=M2w0DqhXM9fI1V2ZVajwEJ5C3pjrHpBdgyB2aAM9KWY%3D&reserved=0
freeipa-users@lists.fedorahosted.org
-
Alexander Bokovoy -
Angus Clarke -
Florence Blanc-Renaud -
Rob Crittenden -
Vinícius Ferrão