-------- Original Message -------- From: Lance Lassetter lancelassetter@gmail.com Sent: July 26, 2015 9:46:22 AM CDT To: Josh Boyer jwboyer@fedoraproject.org Subject: Re: failed to build kernel from kernel-4.2.0-0.rc3.git3.1.fc23.src.rpm
On July 26, 2015 9:06:35 AM CDT, Josh Boyer jwboyer@fedoraproject.org wrote:
On Sun, Jul 26, 2015 at 9:39 AM, Masami Ichikawa masami256@gmail.com wrote:
Hi,
I tried to rebuild kernel from
kernel-4.2.0-0.rc3.git3.1.fc23.src.rpm
but I got following error.
Applying: lib/cpumask: Make CPUMASK_OFFSTACK usable without debug
dependency
Applying: amd-xgbe-a0: Add support for XGBE on A0 Applying: amd-xgbe-phy-a0: Add support for XGBE PHY on A0 Applying: arm64: avoid needing console= to enable serial console Applying: usb: make xhci platform driver use 64 bit or 32 bit DMA Applying: arm64: acpi drop expert patch Applying: ARM: tegra: usb no reset error: drivers/usb/core/hub.c: does not exist in index Patch failed at 0007 ARM: tegra: usb no reset The copy of the patch that failed is found in:
/home/masami/rpmbuild/BUILD/kernel-4.1.fc23/linux-4.2.0-0.rc3.git3.1.fc23.x86_64/.git/rebase-apply/patch
When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am
--abort".
error: Bad exit status from /var/tmp/rpm-tmp.yWoA78 (%prep)
Failed patch is this.
masami@f23-test:~$ cat
rpmbuild/BUILD/kernel-4.1.fc23/linux-4.2.0-0.rc3.git3.1.fc23.x86_64/.git/rebase-apply/patch
drivers/usb/core/hub.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 43cb2f2e3b43..7f838ec11c81 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4996,6 +4996,13 @@ static void hub_event(struct work_struct
*work)
(u16) hub->change_bits[0], (u16) hub->event_bits[0]);
/* Don't disconnect USB-SATA on TrimSlice */
if (strcmp(dev_name(hdev->bus->controller), "tegra-ehci.0")
== 0) {
if ((hdev->state == 7) && (hub->change_bits[0] == 0)
&&
(hub->event_bits[0] == 0x2))
hub->event_bits[0] = 0;
}
/* Lock the device, then check to see if we were * disconnected while waiting for the lock to succeed. */ usb_lock_device(hdev);
any idea?
I did following command to rebuild on fedora 23(x86_64) environment. rpmbuild -bp --target=$(uname -m) kernel.spec
We'd likely need to see the whole log. Also, why are you rebuilding something that is already built on koji? Normally that is done if someone makes modifications, so I'm curious if you have done so.
josh
possibly unrelated:
I'm getting kernel panics when issuing legacy Fedora/Red Hat commands like and latest stable kernel in F22:
service network restart - kernel panic
Also with NetworkManager I get no kernel panics; however, it hoses my routing table when using a public VPN.
init 5 back to init 3 back to init 5 i lose display (but if I systemctl isolate graphical.target, multi-user.target...I do not lose display.
Maybe a document is needed for users to not use legacy tools?
Lance
kernel mailing list kernel@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/kernel
kernel@lists.fedoraproject.org