kexec May 2014

kexec@lists.fedoraproject.org

9 participants
27 discussions

Question: is there any automated way of building rpm package?
by HATAYAMA Daisuke 05 Jun '15

05 Jun '15

Hello, Is there any automated way of building rpm package? That is, installing files such eppic, kexec-tools-po, makedumpfile and kexec-tools with expected file names necessary for installation, place them proper file path location and then execute rpmbuild command. I first found out there's no Makefile and INSTALL file, and then I tried preparing them manually in an ad-hoc way, but faced build failure several times and gave up. -- Thanks. HATAYAMA, Daisuke

2 2

[PATCH v3] kdump-module-setup.sh: Handle static IPs defined in NetworkManager gui
by Marc Milgram 24 Jun '14

24 Jun '14

NetworkManager changed the format of ifcfg-device files. They may define static IP addresses with the following format: IPADDR0=192.168.122.100 PREFIX0=24 There may be up to 255 ip addresses for a network device - each with a unique number tagged to the end of IPADDR and PREFIX. Prior to this fix, kdump only handled static ip addresses defined with IPADDR=192.168.122.100 PREFIX=24 ie. without the number. The solution is to use "ip" commands to find the correct network information. Tested with both static and dynamic IP addresses. v2: Fixed a local variable that was set incorrectly v3: Fix iscsi case Signed-off-by: Marc Milgram <mmilgram(a)redhat.com> --- diff --git a/dracut-module-setup.sh b/dracut-module-setup.sh index 2a16900..87ad072 100755 --- a/dracut-module-setup.sh +++ b/dracut-module-setup.sh @@ -67,14 +67,17 @@ kdump_setup_dns() { } #$1: netdev name -#checking /etc/sysconfig/network-scripts/ifcfg-$1, +#$2: srcaddr #if it use static ip echo it, or echo null kdump_static_ip() { - . /etc/sysconfig/network-scripts/ifcfg-$1 - if [ -n "$IPADDR" ]; then - [ -z "$NETMASK" -a -n "$PREFIX" ] && \ - NETMASK=$(ipcalc -m $IPADDR/$PREFIX | cut -d'=' -f2) - echo -n "${IPADDR}::${GATEWAY}:${NETMASK}::" + local _netmask _gateway + local _netdev="$1" _srcaddr="$2" + local _ipaddr=$(ip addr show dev $_netdev permanent | \ + awk "/ $_srcaddr\/.* $_netdev\$/{print \$2}") + if [ -n "$_ipaddr" ]; then + _netmask=$(ipcalc -m $_ipaddr | cut -d'=' -f2) + _gateway=$(ip route list dev $_netdev | awk '/^default /{print $3}') + echo -n "${_srcaddr}::${_gateway}:${_netmask}::" fi } @@ -181,7 +184,7 @@ kdump_setup_znet() { # Setup dracut to bringup a given network interface kdump_setup_netdev() { - local _netdev=$1 + local _netdev=$1 _srcaddr=$2 local _static _proto _ip_conf _ip_opts _ifname_opts if [ "$(uname -m)" = "s390x" ]; then @@ -189,7 +192,7 @@ kdump_setup_netdev() { fi _netmac=$(kdump_get_mac_addr $_netdev) - _static=$(kdump_static_ip $_netdev) + _static=$(kdump_static_ip $_netdev $_srcaddr) if [ -n "$_static" ]; then _proto=none else @@ -223,8 +226,9 @@ kdump_setup_netdev() { #Function:kdump_install_net #$1: config values of net line in kdump.conf +#$2: srcaddr of network device kdump_install_net() { - local _server _netdev + local _server _netdev _srcaddr local config_val="$1" _server=`echo $config_val | sed 's/.*@//' | cut -d':' -f1` @@ -239,13 +243,15 @@ kdump_install_net() { if [ -n "`echo $_netdev | grep via`" ] then # we are going to a different subnet + _srcaddr=`echo $_netdev|awk '{print $7}'|head -n 1` _netdev=`echo $_netdev|awk '{print $5;}'|head -n 1` else # we are on the same subnet + _srcaddr=`echo $_netdev|awk '{print $5}'|head -n 1` _netdev=`echo $_netdev|awk '{print $3}'|head -n 1` fi - kdump_setup_netdev "${_netdev}" + kdump_setup_netdev "${_netdev}" "${_srcaddr}" #save netdev used for kdump as cmdline # Whoever calling kdump_install_net() is setting up the default gateway, @@ -364,6 +370,7 @@ kdump_setup_iscsi_device() { local username; local password; local userpwd_str; local username_in; local password_in; local userpwd_in_str; local netdev + local srcaddr local idev local netroot_str ; local initiator_str; local netroot_conf="${initdir}/etc/cmdline.d/50iscsi.conf" @@ -398,9 +405,11 @@ kdump_setup_iscsi_device() { [ -n "$username_in" ] && userpwd_in_str=":$username_in:$password_in" netdev=$(/sbin/ip route get to ${tgt_ipaddr} | \ - sed 's|.*dev $.*$.*|\1|g' | awk '{ print $1; exit }') + sed 's|.*dev $.*$.*|\1|g') + srcaddr=$(echo $netdev | awk '{ print $3; exit }') + netdev=$(echo $netdev | awk '{ print $1; exit }') - kdump_setup_netdev $netdev + kdump_setup_netdev $netdev $srcaddr # prepare netroot= command line # FIXME: IPV6 addresses require explicit [] around $tgt_ipaddr

4 5

[PATCH] kdumpctl: time out after 180 seconds when connecting to ssh host
by WANG Chao 03 Jun '14

03 Jun '14

When starting kdump service with dump target being ssh host, after network-online.target, we connect to ssh host and touch the dump directory to make sure the host is ready to be dumped to. Chances are after network-online.target, the particular network resource we interest in isn't ready for connecting to the specified ssh host. And at that time, we connect to ssh host and fail. What we should do is to wait for the specific network resource, not totally depending on network-online.target. But it's relatively complicated to implement. A simple and direct solution would be try as many time as it needs to connect to the configured ssh host. However to avoid a infinitely loop, we time out and fail. I set this time out value to be 180 seconds, and general speaking, 180 seconds would be enough for almost any kind of network to be up and ready. Signed-off-by: WANG Chao <chaowang(a)redhat.com> --- kdumpctl | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/kdumpctl b/kdumpctl index 9cae0c4..0bd6021 100755 --- a/kdumpctl +++ b/kdumpctl @@ -381,8 +381,19 @@ function check_ssh_config() function check_ssh_target() { local _ret - ssh -q -i $SSH_KEY_LOCATION -o BatchMode=yes $DUMP_TARGET mkdir -p $SAVE_PATH - _ret=$? + local _start _delta + + # Timeout out after 180 seconds, hopefully it's enough. + _start=$(date +%s) + while : ; do + ssh -q -i $SSH_KEY_LOCATION -o BatchMode=yes $DUMP_TARGET mkdir -p $SAVE_PATH + _ret=$? + _delta=$(($(date +%s) - $_start)) + if [[ $_ret -eq 0 || $_delta -gt 180 ]]; then + break + fi + done + if [ $_ret -ne 0 ]; then echo "Could not create $DUMP_TARGET:$SAVE_PATH, you probably need to run \"kdumpctl propagate\"" >&2 return 1 -- 1.9.3

2 4

[PATCH v4 0/8] kdump: Modify kdump init script to support firmware-assisted dump
by Hari Bathini 30 May '14

30 May '14

This patch set implements firmware-assisted dump support for kdump service. Firmware-assisted dump support depends on existing kdump infrastructure (kdump scripts) present in userland to save dump to the disk. Though existing kdump script will work seemlessly, it still needs to modified to make it aware of presense of firmware- assisted dump feature during service start and stop. These changes are tested successfully on a power box with fedora19. Changes in v4: 1. Using a global variable DUMP_MODE to store current dump mode. 2. Updated the fadump-howto.txt doc based on review comments. --- Hari Bathini (8): kdump: Modify status routine to check for firmware-assisted dump kdump: Modify kdump script to start the firmware assisted dump. kdump: Modify kdump script to stop firmware assisted dump kdump: Take a backup of original default initrd before rebuilding. kdump: Rebuild default initrd for firmware assisted dump kdump: Get rid of "function" keyword from all functions kdump: Check for /proc/vmcore existence before capturing the vmcore. kdump: Add firmware-assisted dump howto document dracut-kdump.sh | 3 + fadump-howto.txt | 250 +++++++++++++++++++++++++++++++++++++++++++ kdumpctl | 312 ++++++++++++++++++++++++++++++++++++++++++++++-------- 3 files changed, 516 insertions(+), 49 deletions(-) create mode 100644 fadump-howto.txt -- -Hari

2 17

[PATCH v2] Modify dracut-kdump.sh and dracut-module-setup.sh to support ipv6 nfs dump
by Arthur Zou 30 May '14

30 May '14

Resolves: bz821620 Currently dracut has supported for ipv6, and it is a significant feture for kdump to enhance to support ipv6. For ipv6 nfs dump: if ipv6 address type is link scope, /etc/kdump.conf should be edited like "nfs [fe80::5054:ff:fe48:ca80%eth0]:/mnt" else /etc/kdump.conf should be edited like "nfs [2001:db8:0:f101::2]:/mnt" For ipv6 ssh dump if ipv6 address type is link scope, /etc/kdump.conf should be edited like "ssh root@fe80::5054:ff:fe48:ca80%eth0" else /etc/kdump.conf should be edited like "ssh root@2001:db8:0:f101::2" Signed-off-by: Arthur Zou <zzou(a)redhat.com> --- dracut-kdump.sh | 10 ++++++++-- dracut-module-setup.sh | 34 ++++++++++++++++++++++++++-------- kdump-lib.sh | 17 +++++++++++++++++ 3 files changed, 51 insertions(+), 10 deletions(-) diff --git a/dracut-kdump.sh b/dracut-kdump.sh index cb13d92..c215bee 100755 --- a/dracut-kdump.sh +++ b/dracut-kdump.sh @@ -206,10 +206,16 @@ get_host_ip() then kdumpnic=$(getarg kdumpnic=) [ -z "$kdumpnic" ] && echo "kdump: failed to get kdumpnic!" && return 1 - _host=`ip addr show dev $kdumpnic|grep 'inet '` + if is_ipv6_target + then + _host=`ip addr show dev $kdumpnic|grep 'inet6'` + else + _host=`ip addr show dev $kdumpnic|grep 'inet '` + fi [ $? -ne 0 ] && echo "kdump: wrong kdumpnic: $kdumpnic" && return 1 - _host="${_host##*inet }" + _host="${_host#*inet}" _host="${_host%%/*}" + _host=`echo $_host | cut -d' ' -f2` [ -z "$_host" ] && echo "kdump: wrong kdumpnic: $kdumpnic" && return 1 HOST_IP=$_host fi diff --git a/dracut-module-setup.sh b/dracut-module-setup.sh index 2a16900..c305d8e 100755 --- a/dracut-module-setup.sh +++ b/dracut-module-setup.sh @@ -71,10 +71,20 @@ kdump_setup_dns() { #if it use static ip echo it, or echo null kdump_static_ip() { . /etc/sysconfig/network-scripts/ifcfg-$1 - if [ -n "$IPADDR" ]; then - [ -z "$NETMASK" -a -n "$PREFIX" ] && \ - NETMASK=$(ipcalc -m $IPADDR/$PREFIX | cut -d'=' -f2) - echo -n "${IPADDR}::${GATEWAY}:${NETMASK}::" + if is_ipv6_target + then + if [ -n "$IPV6ADDR" ]; then + IPV6ADDR=${IPV6ADDR%/*} #strip the prefix + IPV6ADDR="[${IPV6ADDR}]" + IPV6_DEFAULTGW="[${IPV6_DEFAULTGW}]" + echo -n "${IPV6ADDR}::${IPV6_DEFAULTGW}:64::" + fi + else + if [ -n "$IPADDR" ]; then + [ -z "$NETMASK" -a -n "$PREFIX" ] && \ + NETMASK=$(ipcalc -m $IPADDR/$PREFIX | cut -d'=' -f2) + echo -n "${IPADDR}::${GATEWAY}:${NETMASK}::" + fi fi } @@ -227,16 +237,24 @@ kdump_install_net() { local _server _netdev local config_val="$1" - _server=`echo $config_val | sed 's/.*@//' | cut -d':' -f1` + _server=`echo $config_val | sed 's/.*@//'` + _server=${_server%:/*} + _server=${_server#[} + _server=${_server%]} + _server=${_server%\%*} #strip the zone_ID if exist - _need_dns=`echo $_server|grep "[a-zA-Z]"` - [ -n "$_need_dns" ] && _server=`getent hosts $_server|cut -d' ' -f1` + #ipv4 address or hostname + if ! is_ipv6_target + then + _need_dns=`echo $_server|grep "[a-zA-Z]"` + [ -n "$_need_dns" ] && _server=`getent hosts $_server|cut -d' ' -f1` + fi _netdev=`/sbin/ip route get to $_server 2>&1` [ $? != 0 ] && echo "Bad kdump location: $config_val" && exit 1 #the field in the ip output changes if we go to another subnet - if [ -n "`echo $_netdev | grep via`" ] + if [ -n "`echo $_netdev | grep -E 'via|from'`" ] then # we are going to a different subnet _netdev=`echo $_netdev|awk '{print $5;}'|head -n 1` diff --git a/kdump-lib.sh b/kdump-lib.sh index a20c6e8..332328f 100755 --- a/kdump-lib.sh +++ b/kdump-lib.sh @@ -44,6 +44,23 @@ strip_comments() echo $@ | sed -e 's/$.*$#.*/\1/' } +# check the remote server ip address tpye +is_ipv6_target() +{ + local _server + if is_ssh_dump_target; then + _server=`grep "^ssh" /etc/kdump.conf` + elif is_nfs_dump_target; then + _server=`grep "^nfs" /etc/kdump.conf` + fi + + [ -z "$_server" ] && return 1 + _server=`strip_comment $_server` + _server=${_server#*@} + _server=${_server%:/*} + echo $_server | grep -q ":" +} + # Check if fence kdump is configured in Pacemaker cluster is_pcs_fence_kdump() { -- 1.8.4.2

1 0

[PATCH v2] kdump-module-setup.sh: Handle static IPs defined in NetworkManager gui
by Marc Milgram 27 May '14

27 May '14

NetworkManager changed the format of ifcfg-device files. They may define static IP addresses with the following format: IPADDR0=192.168.122.100 PREFIX0=24 There may be up to 255 ip addresses for a network device - each with a unique number tagged to the end of IPADDR and PREFIX. Prior to this fix, kdump only handled static ip addresses defined with IPADDR=192.168.122.100 PREFIX=24 ie. without the number. The solution is to use "ip" commands to find the correct network information. Tested with both static and dynamic IP addresses. v2: Fixed a local variable that was set incorrectly Signed-off-by: Marc Milgram <mmilgram(a)redhat.com> diff --git a/dracut-module-setup.sh b/dracut-module-setup.sh index 2a16900..bfe1924 100755 --- a/dracut-module-setup.sh +++ b/dracut-module-setup.sh @@ -67,14 +67,17 @@ kdump_setup_dns() { } #$1: netdev name -#checking /etc/sysconfig/network-scripts/ifcfg-$1, +#$2: srcaddr #if it use static ip echo it, or echo null kdump_static_ip() { - . /etc/sysconfig/network-scripts/ifcfg-$1 - if [ -n "$IPADDR" ]; then - [ -z "$NETMASK" -a -n "$PREFIX" ] && \ - NETMASK=$(ipcalc -m $IPADDR/$PREFIX | cut -d'=' -f2) - echo -n "${IPADDR}::${GATEWAY}:${NETMASK}::" + local _netmask _gateway + local _netdev="$1" _srcaddr="$2" + local _ipaddr=$(ip addr show dev $_netdev permanent | \ + awk "/ $_srcaddr\/.* $_netdev\$/{print \$2}") + if [ -n "$_ipaddr" ]; then + _netmask=$(ipcalc -m $_ipaddr | cut -d'=' -f2) + _gateway=$(ip route list dev $_netdev | awk '/^default /{print $3}') + echo -n "${_srcaddr}::${_gateway}:${_netmask}::" fi } @@ -181,7 +184,7 @@ kdump_setup_znet() { # Setup dracut to bringup a given network interface kdump_setup_netdev() { - local _netdev=$1 + local _netdev=$1 _srcaddr=$2 local _static _proto _ip_conf _ip_opts _ifname_opts if [ "$(uname -m)" = "s390x" ]; then @@ -189,7 +192,7 @@ kdump_setup_netdev() { fi _netmac=$(kdump_get_mac_addr $_netdev) - _static=$(kdump_static_ip $_netdev) + _static=$(kdump_static_ip $_netdev $_srcaddr) if [ -n "$_static" ]; then _proto=none else @@ -223,8 +226,9 @@ kdump_setup_netdev() { #Function:kdump_install_net #$1: config values of net line in kdump.conf +#$2: srcaddr of network device kdump_install_net() { - local _server _netdev + local _server _netdev _srcaddr local config_val="$1" _server=`echo $config_val | sed 's/.*@//' | cut -d':' -f1` @@ -239,13 +243,15 @@ kdump_install_net() { if [ -n "`echo $_netdev | grep via`" ] then # we are going to a different subnet + _srcaddr=`echo $_netdev|awk '{print $7}'|head -n 1` _netdev=`echo $_netdev|awk '{print $5;}'|head -n 1` else # we are on the same subnet + _srcaddr=`echo $_netdev|awk '{print $5}'|head -n 1` _netdev=`echo $_netdev|awk '{print $3}'|head -n 1` fi - kdump_setup_netdev "${_netdev}" + kdump_setup_netdev "${_netdev}" "${_srcaddr}" #save netdev used for kdump as cmdline # Whoever calling kdump_install_net() is setting up the default gateway,

4 6

[PATCH] Modify dracut-kdump.sh and dracut-module-setup.sh to support ipv6 nfs dump
by Arthur Zou 27 May '14

27 May '14

Resolves: bz821620 Currently dracut has supported for ipv6, and it is a significant feture for kdump to enhance to support ipv6. For ipv6 nfs dump: if ipv6 address type is link scope, /etc/kdump.conf should be edited like "mount [fe80::5054:ff:fe48:ca80%eth0]:/mnt /mnt" else /etc/kdump.conf should be edited like "mount [2001:db8:0:f101::2]:/mnt /mnt" For ipv6 ssh dump if ipv6 address type is link scope, /etc/kdump.conf should be edited like "ssh root@fe80::5054:ff:fe48:ca80%eth0" else /etc/kdump.conf should be edited like "ssh root@2001:db8:0:f101::2" Signed-off-by: Arthur Zou <zzou(a)redhat.com> --- dracut-kdump.sh | 5 +++-- dracut-module-setup.sh | 37 +++++++++++++++++++++++++++++-------- 2 files changed, 32 insertions(+), 10 deletions(-) diff --git a/dracut-kdump.sh b/dracut-kdump.sh index cb13d92..12a1c8c 100755 --- a/dracut-kdump.sh +++ b/dracut-kdump.sh @@ -206,10 +206,11 @@ get_host_ip() then kdumpnic=$(getarg kdumpnic=) [ -z "$kdumpnic" ] && echo "kdump: failed to get kdumpnic!" && return 1 - _host=`ip addr show dev $kdumpnic|grep 'inet '` + _host=`ip addr show dev $kdumpnic|grep 'inet'` [ $? -ne 0 ] && echo "kdump: wrong kdumpnic: $kdumpnic" && return 1 - _host="${_host##*inet }" + _host="${_host#*inet}" _host="${_host%%/*}" + _host=`echo $_host | cut -d' ' -f2` [ -z "$_host" ] && echo "kdump: wrong kdumpnic: $kdumpnic" && return 1 HOST_IP=$_host fi diff --git a/dracut-module-setup.sh b/dracut-module-setup.sh index 2a16900..20bdb38 100755 --- a/dracut-module-setup.sh +++ b/dracut-module-setup.sh @@ -71,11 +71,22 @@ kdump_setup_dns() { #if it use static ip echo it, or echo null kdump_static_ip() { . /etc/sysconfig/network-scripts/ifcfg-$1 - if [ -n "$IPADDR" ]; then - [ -z "$NETMASK" -a -n "$PREFIX" ] && \ - NETMASK=$(ipcalc -m $IPADDR/$PREFIX | cut -d'=' -f2) - echo -n "${IPADDR}::${GATEWAY}:${NETMASK}::" + if [ -z "$ipv6" ] + then + if [ -n "$IPADDR" ]; then + [ -z "$NETMASK" -a -n "$PREFIX" ] && \ + NETMASK=$(ipcalc -m $IPADDR/$PREFIX | cut -d'=' -f2) + echo -n "${IPADDR}::${GATEWAY}:${NETMASK}::" + fi + else + if [ -n "$IPV6ADDR" ]; then + IPV6ADDR=${IPV6ADDR%/*} #strip the prefix + IPV6ADDR="[${IPV6ADDR}]" + IPV6_DEFAULTGW="[${IPV6_DEFAULTGW}]" + echo -n "${IPV6ADDR}::${IPV6_DEFAULTGW}:64::" + fi fi + unset ipv6 } kdump_get_mac_addr() { @@ -227,16 +238,26 @@ kdump_install_net() { local _server _netdev local config_val="$1" - _server=`echo $config_val | sed 's/.*@//' | cut -d':' -f1` + _server=`echo $config_val | sed 's/.*@//'` + _server=${_server%:/*} + _server=${_server#[} + _server=${_server%]} + _server=${_server%\%*} #strip the zone_ID if exist + + ipv6=`echo $_server | grep ":"` - _need_dns=`echo $_server|grep "[a-zA-Z]"` - [ -n "$_need_dns" ] && _server=`getent hosts $_server|cut -d' ' -f1` + #ipv4 address or hostname + if [ -z "$ipv6" ] + then + _need_dns=`echo $_server|grep "[a-zA-Z]"` + [ -n "$_need_dns" ] && _server=`getent hosts $_server|cut -d' ' -f1` + fi _netdev=`/sbin/ip route get to $_server 2>&1` [ $? != 0 ] && echo "Bad kdump location: $config_val" && exit 1 #the field in the ip output changes if we go to another subnet - if [ -n "`echo $_netdev | grep via`" ] + if [ -n "`echo $_netdev | grep -E 'via|from'`" ] then # we are going to a different subnet _netdev=`echo $_netdev|awk '{print $5;}'|head -n 1` -- 1.8.4.2

1 0

[PATCH REPOST 0/5] Kdump error handling service
by WANG Chao 23 May '14

23 May '14

Hi, All This patchset introduce a new kdump emergency service. It will override the existing emergency.service. When fatal error occurs, this emergency service will be triggered and systemd will isolate to emergency path. This kdump emergency service can will read kdump.conf and act according to the configired "default action" (reboot/poweroff/halt/shell/dump_to_rootfs). Along with this patchset, kdump-capture.service is introduced as a service unit to run kdump.sh. When kdump-capture.service fails, systemd will isolate to kdump emergency service. I copied all the dependencies from dracut-pre-pivot.service to kdump-capture.service so that kdump.sh will be called the correct time window. WANG Chao (5): mkdumprd: changes for mount point and options in 2nd kernel cleanup: extract functions from kdump.sh to kdump-lib.sh Introduce kdump error handling service Introduce kdump capture service disable dracut-emergency.service the whole time dracut-kdump-capture.service | 32 ++++++++ dracut-kdump-emergency.service | 32 ++++++++ dracut-kdump-error-handler.sh | 10 +++ dracut-kdump.sh | 161 +--------------------------------------- dracut-module-setup.sh | 7 +- kdump-lib.sh | 163 +++++++++++++++++++++++++++++++++++++++++ kexec-tools.spec | 7 +- mkdumprd | 25 ++++--- 8 files changed, 266 insertions(+), 171 deletions(-) create mode 100644 dracut-kdump-capture.service create mode 100644 dracut-kdump-emergency.service create mode 100755 dracut-kdump-error-handler.sh -- 1.9.0

2 16

[PATCH] Rename the subpackage kdump-anaconda-addon
by Arthur Zou 22 May '14

22 May '14

Rename the subpackage kdump-anaconda-addon to kexec-tools-anaconda-addon to keep consistency and make fedpkg build happy Because every time fedpkg builds a new release the package version number should increase. But kdump-annaconda-addon just keep same version, so let's rename it to kexec-tools-annaconda-addon here kexec-tools- is a default prefix. For version let's use default top level version. At the same time, rename the kdump-anaconda-addon directory name to anaconda-addon to make it more standard. Using the current data instead of version number as a surfix of kdump-anaconda-addon tarball just like kexec-tools-po did. Signed-off-by: Arthur Zou <zzou(a)redhat.com> --- {kdump-anaconda-addon => anaconda-addon}/Makefile | 18 ++++++++---------- {kdump-anaconda-addon => anaconda-addon}/README | 0 .../com_redhat_kdump/__init__.py | 0 .../com_redhat_kdump/common.py | 0 .../com_redhat_kdump/constants.py | 0 .../com_redhat_kdump/gui/__init__.py | 0 .../com_redhat_kdump/gui/spokes/RHEL.glade | 0 .../com_redhat_kdump/gui/spokes/__init__.py | 0 .../com_redhat_kdump/gui/spokes/fedora.glade | 0 .../com_redhat_kdump/gui/spokes/kdump.py | 0 .../com_redhat_kdump/i18n.py | 0 .../com_redhat_kdump/ks/__init__.py | 0 .../com_redhat_kdump/ks/kdump.py | 0 .../com_redhat_kdump/tui/__init__.py | 0 .../com_redhat_kdump/tui/spokes/__init__.py | 0 .../com_redhat_kdump/tui/spokes/kdump.py | 0 {kdump-anaconda-addon => anaconda-addon}/po/Makefile | 0 {kdump-anaconda-addon => anaconda-addon}/po/ar.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/as.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/bg.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/bn.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/bn_IN.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/bs.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/ca.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/cs.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/cy.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/da.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/de.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/el.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/en_GB.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/es.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/et.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/fa.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/fi.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/fr.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/gu.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/he.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/hi.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/hr.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/hu.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/hy.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/id.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/is.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/it.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/ja.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/ka.po | 0 .../po/kdump-anaconda-addon.pot | 0 {kdump-anaconda-addon => anaconda-addon}/po/kn.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/ko.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/ku.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/lo.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/lv.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/mk.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/ml.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/mr.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/ms.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/my.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/nb.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/nl.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/or.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/pa.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/pl.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/pom.xml | 0 {kdump-anaconda-addon => anaconda-addon}/po/pt.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/pt_BR.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/ru.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/si.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/sk.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/sl.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/sq.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/sr.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/sr(a)Latn.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/sv.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/ta.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/ta_IN.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/te.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/tr.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/uk.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/ur.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/vi.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/zanata.xml | 0 {kdump-anaconda-addon => anaconda-addon}/po/zh_CN.po | 0 {kdump-anaconda-addon => anaconda-addon}/po/zh_TW.po | 0 kexec-tools.spec | 14 ++++++-------- 84 files changed, 14 insertions(+), 18 deletions(-) rename {kdump-anaconda-addon => anaconda-addon}/Makefile (84%) rename {kdump-anaconda-addon => anaconda-addon}/README (100%) rename {kdump-anaconda-addon => anaconda-addon}/com_redhat_kdump/__init__.py (100%) rename {kdump-anaconda-addon => anaconda-addon}/com_redhat_kdump/common.py (100%) rename {kdump-anaconda-addon => anaconda-addon}/com_redhat_kdump/constants.py (100%) rename {kdump-anaconda-addon => anaconda-addon}/com_redhat_kdump/gui/__init__.py (100%) rename {kdump-anaconda-addon => anaconda-addon}/com_redhat_kdump/gui/spokes/RHEL.glade (100%) rename {kdump-anaconda-addon => anaconda-addon}/com_redhat_kdump/gui/spokes/__init__.py (100%) rename {kdump-anaconda-addon => anaconda-addon}/com_redhat_kdump/gui/spokes/fedora.glade (100%) rename {kdump-anaconda-addon => anaconda-addon}/com_redhat_kdump/gui/spokes/kdump.py (100%) rename {kdump-anaconda-addon => anaconda-addon}/com_redhat_kdump/i18n.py (100%) rename {kdump-anaconda-addon => anaconda-addon}/com_redhat_kdump/ks/__init__.py (100%) rename {kdump-anaconda-addon => anaconda-addon}/com_redhat_kdump/ks/kdump.py (100%) rename {kdump-anaconda-addon => anaconda-addon}/com_redhat_kdump/tui/__init__.py (100%) rename {kdump-anaconda-addon => anaconda-addon}/com_redhat_kdump/tui/spokes/__init__.py (100%) rename {kdump-anaconda-addon => anaconda-addon}/com_redhat_kdump/tui/spokes/kdump.py (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/Makefile (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/ar.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/as.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/bg.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/bn.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/bn_IN.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/bs.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/ca.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/cs.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/cy.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/da.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/de.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/el.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/en_GB.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/es.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/et.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/fa.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/fi.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/fr.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/gu.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/he.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/hi.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/hr.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/hu.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/hy.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/id.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/is.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/it.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/ja.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/ka.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/kdump-anaconda-addon.pot (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/kn.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/ko.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/ku.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/lo.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/lv.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/mk.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/ml.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/mr.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/ms.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/my.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/nb.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/nl.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/or.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/pa.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/pl.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/pom.xml (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/pt.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/pt_BR.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/ru.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/si.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/sk.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/sl.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/sq.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/sr.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/sr(a)Latn.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/sv.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/ta.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/ta_IN.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/te.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/tr.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/uk.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/ur.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/vi.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/zanata.xml (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/zh_CN.po (100%) rename {kdump-anaconda-addon => anaconda-addon}/po/zh_TW.po (100%) diff --git a/kdump-anaconda-addon/Makefile b/anaconda-addon/Makefile similarity index 84% rename from kdump-anaconda-addon/Makefile rename to anaconda-addon/Makefile index affd8f5..1b30e44 100644 --- a/kdump-anaconda-addon/Makefile +++ b/anaconda-addon/Makefile @@ -1,7 +1,5 @@ NAME = kdump-anaconda-addon -VERSION = 0.1 - ADDON = com_redhat_kdump TESTS = test @@ -20,7 +18,7 @@ all: @echo " make install" @echo " make uninstall" -DISTNAME = $(NAME)-$(VERSION) +DISTNAME = $(NAME)-$(shell date +%Y%m%d) ADDONDIR = /usr/share/anaconda/addons/ DISTBALL = $(DISTNAME).tar.gz NUM_PROCS = $$(getconf _NPROCESSORS_ONLN) @@ -34,28 +32,28 @@ uninstall: rm -rfv $(DESTDIR)$(ADDONDIR) dist: - rm -rf $(DISTNAME) - mkdir -p $(DISTNAME) + rm -rf $(NAME) + mkdir -p $(NAME) @if test -d ".git"; \ then \ echo Creating ChangeLog && \ ( cd "$(top_srcdir)" && \ echo '# Generate automatically. Do not edit.'; echo; \ git log --stat --date=short ) > ChangeLog.tmp \ - && mv -f ChangeLog.tmp $(DISTNAME)/ChangeLog \ + && mv -f ChangeLog.tmp $(NAME)/ChangeLog \ || ( rm -f ChangeLog.tmp ; \ echo Failed to generate ChangeLog >&2 ); \ else \ echo A git clone is required to generate a ChangeLog >&2; \ fi for file in $(FILES); do \ - cp -rpv $$file $(DISTNAME)/$$file; \ + cp -rpv $$file $(NAME)/$$file; \ done for excl in $(EXCLUDES); do \ - find $(DISTNAME) -name "$$excl" -delete; \ + find $(NAME) -name "$$excl" -delete; \ done - tar -czvf ../$(DISTBALL) $(DISTNAME) - rm -rf $(DISTNAME) + tar -czvf ../$(DISTBALL) $(NAME) + rm -rf $(NAME) potfile: $(MAKE) DESTDIR=$(DESTDIR) -C po potfile diff --git a/kdump-anaconda-addon/README b/anaconda-addon/README similarity index 100% rename from kdump-anaconda-addon/README rename to anaconda-addon/README diff --git a/kdump-anaconda-addon/com_redhat_kdump/__init__.py b/anaconda-addon/com_redhat_kdump/__init__.py similarity index 100% rename from kdump-anaconda-addon/com_redhat_kdump/__init__.py rename to anaconda-addon/com_redhat_kdump/__init__.py diff --git a/kdump-anaconda-addon/com_redhat_kdump/common.py b/anaconda-addon/com_redhat_kdump/common.py similarity index 100% rename from kdump-anaconda-addon/com_redhat_kdump/common.py rename to anaconda-addon/com_redhat_kdump/common.py diff --git a/kdump-anaconda-addon/com_redhat_kdump/constants.py b/anaconda-addon/com_redhat_kdump/constants.py similarity index 100% rename from kdump-anaconda-addon/com_redhat_kdump/constants.py rename to anaconda-addon/com_redhat_kdump/constants.py diff --git a/kdump-anaconda-addon/com_redhat_kdump/gui/__init__.py b/anaconda-addon/com_redhat_kdump/gui/__init__.py similarity index 100% rename from kdump-anaconda-addon/com_redhat_kdump/gui/__init__.py rename to anaconda-addon/com_redhat_kdump/gui/__init__.py diff --git a/kdump-anaconda-addon/com_redhat_kdump/gui/spokes/RHEL.glade b/anaconda-addon/com_redhat_kdump/gui/spokes/RHEL.glade similarity index 100% rename from kdump-anaconda-addon/com_redhat_kdump/gui/spokes/RHEL.glade rename to anaconda-addon/com_redhat_kdump/gui/spokes/RHEL.glade diff --git a/kdump-anaconda-addon/com_redhat_kdump/gui/spokes/__init__.py b/anaconda-addon/com_redhat_kdump/gui/spokes/__init__.py similarity index 100% rename from kdump-anaconda-addon/com_redhat_kdump/gui/spokes/__init__.py rename to anaconda-addon/com_redhat_kdump/gui/spokes/__init__.py diff --git a/kdump-anaconda-addon/com_redhat_kdump/gui/spokes/fedora.glade b/anaconda-addon/com_redhat_kdump/gui/spokes/fedora.glade similarity index 100% rename from kdump-anaconda-addon/com_redhat_kdump/gui/spokes/fedora.glade rename to anaconda-addon/com_redhat_kdump/gui/spokes/fedora.glade diff --git a/kdump-anaconda-addon/com_redhat_kdump/gui/spokes/kdump.py b/anaconda-addon/com_redhat_kdump/gui/spokes/kdump.py similarity index 100% rename from kdump-anaconda-addon/com_redhat_kdump/gui/spokes/kdump.py rename to anaconda-addon/com_redhat_kdump/gui/spokes/kdump.py diff --git a/kdump-anaconda-addon/com_redhat_kdump/i18n.py b/anaconda-addon/com_redhat_kdump/i18n.py similarity index 100% rename from kdump-anaconda-addon/com_redhat_kdump/i18n.py rename to anaconda-addon/com_redhat_kdump/i18n.py diff --git a/kdump-anaconda-addon/com_redhat_kdump/ks/__init__.py b/anaconda-addon/com_redhat_kdump/ks/__init__.py similarity index 100% rename from kdump-anaconda-addon/com_redhat_kdump/ks/__init__.py rename to anaconda-addon/com_redhat_kdump/ks/__init__.py diff --git a/kdump-anaconda-addon/com_redhat_kdump/ks/kdump.py b/anaconda-addon/com_redhat_kdump/ks/kdump.py similarity index 100% rename from kdump-anaconda-addon/com_redhat_kdump/ks/kdump.py rename to anaconda-addon/com_redhat_kdump/ks/kdump.py diff --git a/kdump-anaconda-addon/com_redhat_kdump/tui/__init__.py b/anaconda-addon/com_redhat_kdump/tui/__init__.py similarity index 100% rename from kdump-anaconda-addon/com_redhat_kdump/tui/__init__.py rename to anaconda-addon/com_redhat_kdump/tui/__init__.py diff --git a/kdump-anaconda-addon/com_redhat_kdump/tui/spokes/__init__.py b/anaconda-addon/com_redhat_kdump/tui/spokes/__init__.py similarity index 100% rename from kdump-anaconda-addon/com_redhat_kdump/tui/spokes/__init__.py rename to anaconda-addon/com_redhat_kdump/tui/spokes/__init__.py diff --git a/kdump-anaconda-addon/com_redhat_kdump/tui/spokes/kdump.py b/anaconda-addon/com_redhat_kdump/tui/spokes/kdump.py similarity index 100% rename from kdump-anaconda-addon/com_redhat_kdump/tui/spokes/kdump.py rename to anaconda-addon/com_redhat_kdump/tui/spokes/kdump.py diff --git a/kdump-anaconda-addon/po/Makefile b/anaconda-addon/po/Makefile similarity index 100% rename from kdump-anaconda-addon/po/Makefile rename to anaconda-addon/po/Makefile diff --git a/kdump-anaconda-addon/po/ar.po b/anaconda-addon/po/ar.po similarity index 100% rename from kdump-anaconda-addon/po/ar.po rename to anaconda-addon/po/ar.po diff --git a/kdump-anaconda-addon/po/as.po b/anaconda-addon/po/as.po similarity index 100% rename from kdump-anaconda-addon/po/as.po rename to anaconda-addon/po/as.po diff --git a/kdump-anaconda-addon/po/bg.po b/anaconda-addon/po/bg.po similarity index 100% rename from kdump-anaconda-addon/po/bg.po rename to anaconda-addon/po/bg.po diff --git a/kdump-anaconda-addon/po/bn.po b/anaconda-addon/po/bn.po similarity index 100% rename from kdump-anaconda-addon/po/bn.po rename to anaconda-addon/po/bn.po diff --git a/kdump-anaconda-addon/po/bn_IN.po b/anaconda-addon/po/bn_IN.po similarity index 100% rename from kdump-anaconda-addon/po/bn_IN.po rename to anaconda-addon/po/bn_IN.po diff --git a/kdump-anaconda-addon/po/bs.po b/anaconda-addon/po/bs.po similarity index 100% rename from kdump-anaconda-addon/po/bs.po rename to anaconda-addon/po/bs.po diff --git a/kdump-anaconda-addon/po/ca.po b/anaconda-addon/po/ca.po similarity index 100% rename from kdump-anaconda-addon/po/ca.po rename to anaconda-addon/po/ca.po diff --git a/kdump-anaconda-addon/po/cs.po b/anaconda-addon/po/cs.po similarity index 100% rename from kdump-anaconda-addon/po/cs.po rename to anaconda-addon/po/cs.po diff --git a/kdump-anaconda-addon/po/cy.po b/anaconda-addon/po/cy.po similarity index 100% rename from kdump-anaconda-addon/po/cy.po rename to anaconda-addon/po/cy.po diff --git a/kdump-anaconda-addon/po/da.po b/anaconda-addon/po/da.po similarity index 100% rename from kdump-anaconda-addon/po/da.po rename to anaconda-addon/po/da.po diff --git a/kdump-anaconda-addon/po/de.po b/anaconda-addon/po/de.po similarity index 100% rename from kdump-anaconda-addon/po/de.po rename to anaconda-addon/po/de.po diff --git a/kdump-anaconda-addon/po/el.po b/anaconda-addon/po/el.po similarity index 100% rename from kdump-anaconda-addon/po/el.po rename to anaconda-addon/po/el.po diff --git a/kdump-anaconda-addon/po/en_GB.po b/anaconda-addon/po/en_GB.po similarity index 100% rename from kdump-anaconda-addon/po/en_GB.po rename to anaconda-addon/po/en_GB.po diff --git a/kdump-anaconda-addon/po/es.po b/anaconda-addon/po/es.po similarity index 100% rename from kdump-anaconda-addon/po/es.po rename to anaconda-addon/po/es.po diff --git a/kdump-anaconda-addon/po/et.po b/anaconda-addon/po/et.po similarity index 100% rename from kdump-anaconda-addon/po/et.po rename to anaconda-addon/po/et.po diff --git a/kdump-anaconda-addon/po/fa.po b/anaconda-addon/po/fa.po similarity index 100% rename from kdump-anaconda-addon/po/fa.po rename to anaconda-addon/po/fa.po diff --git a/kdump-anaconda-addon/po/fi.po b/anaconda-addon/po/fi.po similarity index 100% rename from kdump-anaconda-addon/po/fi.po rename to anaconda-addon/po/fi.po diff --git a/kdump-anaconda-addon/po/fr.po b/anaconda-addon/po/fr.po similarity index 100% rename from kdump-anaconda-addon/po/fr.po rename to anaconda-addon/po/fr.po diff --git a/kdump-anaconda-addon/po/gu.po b/anaconda-addon/po/gu.po similarity index 100% rename from kdump-anaconda-addon/po/gu.po rename to anaconda-addon/po/gu.po diff --git a/kdump-anaconda-addon/po/he.po b/anaconda-addon/po/he.po similarity index 100% rename from kdump-anaconda-addon/po/he.po rename to anaconda-addon/po/he.po diff --git a/kdump-anaconda-addon/po/hi.po b/anaconda-addon/po/hi.po similarity index 100% rename from kdump-anaconda-addon/po/hi.po rename to anaconda-addon/po/hi.po diff --git a/kdump-anaconda-addon/po/hr.po b/anaconda-addon/po/hr.po similarity index 100% rename from kdump-anaconda-addon/po/hr.po rename to anaconda-addon/po/hr.po diff --git a/kdump-anaconda-addon/po/hu.po b/anaconda-addon/po/hu.po similarity index 100% rename from kdump-anaconda-addon/po/hu.po rename to anaconda-addon/po/hu.po diff --git a/kdump-anaconda-addon/po/hy.po b/anaconda-addon/po/hy.po similarity index 100% rename from kdump-anaconda-addon/po/hy.po rename to anaconda-addon/po/hy.po diff --git a/kdump-anaconda-addon/po/id.po b/anaconda-addon/po/id.po similarity index 100% rename from kdump-anaconda-addon/po/id.po rename to anaconda-addon/po/id.po diff --git a/kdump-anaconda-addon/po/is.po b/anaconda-addon/po/is.po similarity index 100% rename from kdump-anaconda-addon/po/is.po rename to anaconda-addon/po/is.po diff --git a/kdump-anaconda-addon/po/it.po b/anaconda-addon/po/it.po similarity index 100% rename from kdump-anaconda-addon/po/it.po rename to anaconda-addon/po/it.po diff --git a/kdump-anaconda-addon/po/ja.po b/anaconda-addon/po/ja.po similarity index 100% rename from kdump-anaconda-addon/po/ja.po rename to anaconda-addon/po/ja.po diff --git a/kdump-anaconda-addon/po/ka.po b/anaconda-addon/po/ka.po similarity index 100% rename from kdump-anaconda-addon/po/ka.po rename to anaconda-addon/po/ka.po diff --git a/kdump-anaconda-addon/po/kdump-anaconda-addon.pot b/anaconda-addon/po/kdump-anaconda-addon.pot similarity index 100% rename from kdump-anaconda-addon/po/kdump-anaconda-addon.pot rename to anaconda-addon/po/kdump-anaconda-addon.pot diff --git a/kdump-anaconda-addon/po/kn.po b/anaconda-addon/po/kn.po similarity index 100% rename from kdump-anaconda-addon/po/kn.po rename to anaconda-addon/po/kn.po diff --git a/kdump-anaconda-addon/po/ko.po b/anaconda-addon/po/ko.po similarity index 100% rename from kdump-anaconda-addon/po/ko.po rename to anaconda-addon/po/ko.po diff --git a/kdump-anaconda-addon/po/ku.po b/anaconda-addon/po/ku.po similarity index 100% rename from kdump-anaconda-addon/po/ku.po rename to anaconda-addon/po/ku.po diff --git a/kdump-anaconda-addon/po/lo.po b/anaconda-addon/po/lo.po similarity index 100% rename from kdump-anaconda-addon/po/lo.po rename to anaconda-addon/po/lo.po diff --git a/kdump-anaconda-addon/po/lv.po b/anaconda-addon/po/lv.po similarity index 100% rename from kdump-anaconda-addon/po/lv.po rename to anaconda-addon/po/lv.po diff --git a/kdump-anaconda-addon/po/mk.po b/anaconda-addon/po/mk.po similarity index 100% rename from kdump-anaconda-addon/po/mk.po rename to anaconda-addon/po/mk.po diff --git a/kdump-anaconda-addon/po/ml.po b/anaconda-addon/po/ml.po similarity index 100% rename from kdump-anaconda-addon/po/ml.po rename to anaconda-addon/po/ml.po diff --git a/kdump-anaconda-addon/po/mr.po b/anaconda-addon/po/mr.po similarity index 100% rename from kdump-anaconda-addon/po/mr.po rename to anaconda-addon/po/mr.po diff --git a/kdump-anaconda-addon/po/ms.po b/anaconda-addon/po/ms.po similarity index 100% rename from kdump-anaconda-addon/po/ms.po rename to anaconda-addon/po/ms.po diff --git a/kdump-anaconda-addon/po/my.po b/anaconda-addon/po/my.po similarity index 100% rename from kdump-anaconda-addon/po/my.po rename to anaconda-addon/po/my.po diff --git a/kdump-anaconda-addon/po/nb.po b/anaconda-addon/po/nb.po similarity index 100% rename from kdump-anaconda-addon/po/nb.po rename to anaconda-addon/po/nb.po diff --git a/kdump-anaconda-addon/po/nl.po b/anaconda-addon/po/nl.po similarity index 100% rename from kdump-anaconda-addon/po/nl.po rename to anaconda-addon/po/nl.po diff --git a/kdump-anaconda-addon/po/or.po b/anaconda-addon/po/or.po similarity index 100% rename from kdump-anaconda-addon/po/or.po rename to anaconda-addon/po/or.po diff --git a/kdump-anaconda-addon/po/pa.po b/anaconda-addon/po/pa.po similarity index 100% rename from kdump-anaconda-addon/po/pa.po rename to anaconda-addon/po/pa.po diff --git a/kdump-anaconda-addon/po/pl.po b/anaconda-addon/po/pl.po similarity index 100% rename from kdump-anaconda-addon/po/pl.po rename to anaconda-addon/po/pl.po diff --git a/kdump-anaconda-addon/po/pom.xml b/anaconda-addon/po/pom.xml similarity index 100% rename from kdump-anaconda-addon/po/pom.xml rename to anaconda-addon/po/pom.xml diff --git a/kdump-anaconda-addon/po/pt.po b/anaconda-addon/po/pt.po similarity index 100% rename from kdump-anaconda-addon/po/pt.po rename to anaconda-addon/po/pt.po diff --git a/kdump-anaconda-addon/po/pt_BR.po b/anaconda-addon/po/pt_BR.po similarity index 100% rename from kdump-anaconda-addon/po/pt_BR.po rename to anaconda-addon/po/pt_BR.po diff --git a/kdump-anaconda-addon/po/ru.po b/anaconda-addon/po/ru.po similarity index 100% rename from kdump-anaconda-addon/po/ru.po rename to anaconda-addon/po/ru.po diff --git a/kdump-anaconda-addon/po/si.po b/anaconda-addon/po/si.po similarity index 100% rename from kdump-anaconda-addon/po/si.po rename to anaconda-addon/po/si.po diff --git a/kdump-anaconda-addon/po/sk.po b/anaconda-addon/po/sk.po similarity index 100% rename from kdump-anaconda-addon/po/sk.po rename to anaconda-addon/po/sk.po diff --git a/kdump-anaconda-addon/po/sl.po b/anaconda-addon/po/sl.po similarity index 100% rename from kdump-anaconda-addon/po/sl.po rename to anaconda-addon/po/sl.po diff --git a/kdump-anaconda-addon/po/sq.po b/anaconda-addon/po/sq.po similarity index 100% rename from kdump-anaconda-addon/po/sq.po rename to anaconda-addon/po/sq.po diff --git a/kdump-anaconda-addon/po/sr.po b/anaconda-addon/po/sr.po similarity index 100% rename from kdump-anaconda-addon/po/sr.po rename to anaconda-addon/po/sr.po diff --git a/kdump-anaconda-addon/po/sr(a)Latn.po b/anaconda-addon/po/sr(a)Latn.po similarity index 100% rename from kdump-anaconda-addon/po/sr(a)Latn.po rename to anaconda-addon/po/sr(a)Latn.po diff --git a/kdump-anaconda-addon/po/sv.po b/anaconda-addon/po/sv.po similarity index 100% rename from kdump-anaconda-addon/po/sv.po rename to anaconda-addon/po/sv.po diff --git a/kdump-anaconda-addon/po/ta.po b/anaconda-addon/po/ta.po similarity index 100% rename from kdump-anaconda-addon/po/ta.po rename to anaconda-addon/po/ta.po diff --git a/kdump-anaconda-addon/po/ta_IN.po b/anaconda-addon/po/ta_IN.po similarity index 100% rename from kdump-anaconda-addon/po/ta_IN.po rename to anaconda-addon/po/ta_IN.po diff --git a/kdump-anaconda-addon/po/te.po b/anaconda-addon/po/te.po similarity index 100% rename from kdump-anaconda-addon/po/te.po rename to anaconda-addon/po/te.po diff --git a/kdump-anaconda-addon/po/tr.po b/anaconda-addon/po/tr.po similarity index 100% rename from kdump-anaconda-addon/po/tr.po rename to anaconda-addon/po/tr.po diff --git a/kdump-anaconda-addon/po/uk.po b/anaconda-addon/po/uk.po similarity index 100% rename from kdump-anaconda-addon/po/uk.po rename to anaconda-addon/po/uk.po diff --git a/kdump-anaconda-addon/po/ur.po b/anaconda-addon/po/ur.po similarity index 100% rename from kdump-anaconda-addon/po/ur.po rename to anaconda-addon/po/ur.po diff --git a/kdump-anaconda-addon/po/vi.po b/anaconda-addon/po/vi.po similarity index 100% rename from kdump-anaconda-addon/po/vi.po rename to anaconda-addon/po/vi.po diff --git a/kdump-anaconda-addon/po/zanata.xml b/anaconda-addon/po/zanata.xml similarity index 100% rename from kdump-anaconda-addon/po/zanata.xml rename to anaconda-addon/po/zanata.xml diff --git a/kdump-anaconda-addon/po/zh_CN.po b/anaconda-addon/po/zh_CN.po similarity index 100% rename from kdump-anaconda-addon/po/zh_CN.po rename to anaconda-addon/po/zh_CN.po diff --git a/kdump-anaconda-addon/po/zh_TW.po b/anaconda-addon/po/zh_TW.po similarity index 100% rename from kdump-anaconda-addon/po/zh_TW.po rename to anaconda-addon/po/zh_TW.po diff --git a/kexec-tools.spec b/kexec-tools.spec index f810271..2b275f2 100644 --- a/kexec-tools.spec +++ b/kexec-tools.spec @@ -26,7 +26,7 @@ Source19: eppic_030413.tar.gz Source20: kdump-lib.sh Source21: kdump-in-cluster-environment.txt Source22: kdump-dep-generator.sh -Source23: kdump-anaconda-addon-0.1.tar.gz +Source23: kdump-anaconda-addon-20140522.tar.gz ####################################### # These are sources for mkdumpramfs @@ -97,12 +97,10 @@ The eppic_makedumpfile.so shared object is loaded by the or confidential kernel data from a dumpfile. %endif -%package -n kdump-anaconda-addon -Version: 0.1 -Release: 1%{?dist} +%package anaconda-addon Summary: Kdump configration anaconda addon Requires: anaconda >= 21.33 -%description -n kdump-anaconda-addon +%description anaconda-addon Kdump anaconda addon %prep @@ -143,7 +141,7 @@ make -C eppic/libeppic make -C makedumpfile-1.5.6 LINKTYPE=dynamic USELZO=on USESNAPPY=on %endif make -C kexec-tools-po -make -C kdump-anaconda-addon-0.1/po +make -C kdump-anaconda-addon/po %install make install DESTDIR=$RPM_BUILD_ROOT @@ -191,7 +189,7 @@ install -m 755 makedumpfile-1.5.6/eppic_makedumpfile.so $RPM_BUILD_ROOT/%{_libdi %endif make -C kexec-tools-po install DESTDIR=$RPM_BUILD_ROOT %find_lang %{name} -make -C kdump-anaconda-addon-0.1 install DESTDIR=$RPM_BUILD_ROOT +make -C kdump-anaconda-addon install DESTDIR=$RPM_BUILD_ROOT %find_lang kdump-anaconda-addon %define remove_dracut_prefix() %(echo -n %1|sed 's/.*dracut-//g') @@ -325,7 +323,7 @@ done %{_libdir}/eppic_makedumpfile.so %endif -%files -n kdump-anaconda-addon -f kdump-anaconda-addon.lang +%files anaconda-addon -f kdump-anaconda-addon.lang %{_datadir}/anaconda/addons/com_redhat_kdump %doc -- 1.8.4.2

1 0

[PATCH] Rename the subpackage kdump-anaconda-addon
by Arthur Zou 22 May '14

22 May '14

Rename the subpackage kdump-anaconda-addon to kexec-tool-anaconda-addon to keep consistency Signed-off-by: Arthur Zou <zzou(a)redhat.com> --- kdump-anaconda-addon/Makefile | 14 +++++++------- kexec-tools.spec | 12 +++++------- 2 files changed, 12 insertions(+), 14 deletions(-) diff --git a/kdump-anaconda-addon/Makefile b/kdump-anaconda-addon/Makefile index affd8f5..7f8747d 100644 --- a/kdump-anaconda-addon/Makefile +++ b/kdump-anaconda-addon/Makefile @@ -34,28 +34,28 @@ uninstall: rm -rfv $(DESTDIR)$(ADDONDIR) dist: - rm -rf $(DISTNAME) - mkdir -p $(DISTNAME) + rm -rf $(NAME) + mkdir -p $(NAME) @if test -d ".git"; \ then \ echo Creating ChangeLog && \ ( cd "$(top_srcdir)" && \ echo '# Generate automatically. Do not edit.'; echo; \ git log --stat --date=short ) > ChangeLog.tmp \ - && mv -f ChangeLog.tmp $(DISTNAME)/ChangeLog \ + && mv -f ChangeLog.tmp $(NAME)/ChangeLog \ || ( rm -f ChangeLog.tmp ; \ echo Failed to generate ChangeLog >&2 ); \ else \ echo A git clone is required to generate a ChangeLog >&2; \ fi for file in $(FILES); do \ - cp -rpv $$file $(DISTNAME)/$$file; \ + cp -rpv $$file $(NAME)/$$file; \ done for excl in $(EXCLUDES); do \ - find $(DISTNAME) -name "$$excl" -delete; \ + find $(NAME) -name "$$excl" -delete; \ done - tar -czvf ../$(DISTBALL) $(DISTNAME) - rm -rf $(DISTNAME) + tar -czvf ../$(DISTBALL) $(NAME) + rm -rf $(NAME) potfile: $(MAKE) DESTDIR=$(DESTDIR) -C po potfile diff --git a/kexec-tools.spec b/kexec-tools.spec index f810271..afe5aa9 100644 --- a/kexec-tools.spec +++ b/kexec-tools.spec @@ -97,12 +97,10 @@ The eppic_makedumpfile.so shared object is loaded by the or confidential kernel data from a dumpfile. %endif -%package -n kdump-anaconda-addon -Version: 0.1 -Release: 1%{?dist} +%package anaconda-addon Summary: Kdump configration anaconda addon Requires: anaconda >= 21.33 -%description -n kdump-anaconda-addon +%description anaconda-addon Kdump anaconda addon %prep @@ -143,7 +141,7 @@ make -C eppic/libeppic make -C makedumpfile-1.5.6 LINKTYPE=dynamic USELZO=on USESNAPPY=on %endif make -C kexec-tools-po -make -C kdump-anaconda-addon-0.1/po +make -C kdump-anaconda-addon/po %install make install DESTDIR=$RPM_BUILD_ROOT @@ -191,7 +189,7 @@ install -m 755 makedumpfile-1.5.6/eppic_makedumpfile.so $RPM_BUILD_ROOT/%{_libdi %endif make -C kexec-tools-po install DESTDIR=$RPM_BUILD_ROOT %find_lang %{name} -make -C kdump-anaconda-addon-0.1 install DESTDIR=$RPM_BUILD_ROOT +make -C kdump-anaconda-addon install DESTDIR=$RPM_BUILD_ROOT %find_lang kdump-anaconda-addon %define remove_dracut_prefix() %(echo -n %1|sed 's/.*dracut-//g') @@ -325,7 +323,7 @@ done %{_libdir}/eppic_makedumpfile.so %endif -%files -n kdump-anaconda-addon -f kdump-anaconda-addon.lang +%files anaconda-addon -f kdump-anaconda-addon.lang %{_datadir}/anaconda/addons/com_redhat_kdump %doc -- 1.8.4.2

2 1

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

kexec May 2014