rhq-users November 2010

rhq-users@lists.stg.fedorahosted.org

7 participants
10 discussions

Priority configuration
by Al Amyot 10 Jan '11

10 Jan '11

I have a requirement to send alert notifications to an incident management system. I see that I can customize the the alert emails but is there a way to remove the "!" marks from the alert priorities? I just want to send High/medium/Low Al Amyot | Consultant Sierra Systems (eHealth): 204-926-4257 (T): 204-942-2575 (F): 204-942-2047 444 St. Mary Avenue, Suite 1050 Winnipeg, MB R3C 3T1 Management Consulting | System Integration | Managed Services website: www.SierraSystems.com <http://www.sierrasystems.com/> This email and/or any documents in this transmission is intended for the addressee(s) only and may contain legally privileged or confidential information. Any unauthorized use, disclosure, distribution, copying or dissemination is strictly prohibited. If you receive this transmission in error, please notify the sender immediately and return the original. Ce courriel et tout document dans cette transmission est destiné à la personne ou aux personnes à qui il est adressé. Il peut contenir des informations privilégiées ou confidentielles. Toute utilisation, divulgation, distribution, copie, ou diffusion non autorisée est strictement défendue. Si vous n'êtes pas le destinataire de ce message, veuillez en informer l'expéditeur immédiatement et lui remettre l'original.

4 3

Performance Monitoring with GWT
by Joseph Marques 29 Nov '10

29 Nov '10

http://josephmarques.wordpress.com/2010/11/29/performance-monitoring-using-… If you want to see the statistics in your own environment, go to /coregui/CoreGUI.html#Test There you'll see the new "Remote Service Statistics" item in the Misc section. It represents all statistics that have been collected since the last time you hit F5.

1 0

restoring an un-inventoried platform
by Al Amyot 23 Nov '10

23 Nov '10

Is there a mechanism to restore a platform that has been removed from the inventory? What about its manually added resources? ...Al This email and/or any documents in this transmission is intended for the addressee(s) only and may contain legally privileged or confidential information. Any unauthorized use, disclosure, distribution, copying or dissemination is strictly prohibited. If you receive this transmission in error, please notify the sender immediately and return the original. Ce courriel et tout document dans cette transmission est destiné à la personne ou aux personnes à qui il est adressé. Il peut contenir des informations privilégiées ou confidentielles. Toute utilisation, divulgation, distribution, copie, ou diffusion non autorisée est strictement défendue. Si vous n'êtes pas le destinataire de ce message, veuillez en informer l'expéditeur immédiatement et lui remettre l'original.

2 1

CLI results: exitcode=[null]
by Al Amyot 22 Nov '10

22 Nov '10

What does an exitcode of null from a script imply? When using the Script plugin, I usually see an exitcode =-999 if the script cannot be executed (e.g. its not found). Executing the same Script plugin using the Execute operation and the same arguments as on the Availability check, returns the expected output. But those same arguments executed on the Availability scan, returns the following. Has it timed out? CLI results: exitcode=[null]; error=[null]; output=<cr><lf> Al Amyot This email and/or any documents in this transmission is intended for the addressee(s) only and may contain legally privileged or confidential information. Any unauthorized use, disclosure, distribution, copying or dissemination is strictly prohibited. If you receive this transmission in error, please notify the sender immediately and return the original. Ce courriel et tout document dans cette transmission est destiné à la personne ou aux personnes à qui il est adressé. Il peut contenir des informations privilégiées ou confidentielles. Toute utilisation, divulgation, distribution, copie, ou diffusion non autorisée est strictement défendue. Si vous n'êtes pas le destinataire de ce message, veuillez en informer l'expéditeur immédiatement et lui remettre l'original.

2 1

initial i18n work is complete
by Joseph Marques 19 Nov '10

19 Nov '10

The initial work for internationalizing the web application is now complete. You can see the tokens with their values in: ...coregui/src/main/resources/org/rhq/enterprise/gui/coregui/client/Messages.properties If you want to add translations for other languages, all you need to do is add another file in the same directory suffixed with the locale like so: ...coregui/src/main/resources/org/rhq/enterprise/gui/coregui/client/Messages_de.properties Once the translation is complete, go to CoreGUI.gwt.xml and enable that localization in the build: <extend-property name="locale" values="de" /> Keep in mind that due to the fact that we're using the static string initialization technique [1], this will lengthen the overall build time when you do this. If you were previously compiling two versions of the application - one for FF, one for WebKit - this will now double the number of compilation permutations - one for FF 'en', one for FF 'de', one for WebKit 'en', and one for WebKit 'de'. Once built, you can access the translated web application by going to: ...CoreGUI.html?locale=de Keep in mind that when you switch locales, it's effectively loading an entirely different application because the translated strings are compiled directly into each permutation separately, thus you'll experience the initial download/startup time again). There are other ways to invoke the correct localized application, such as <meta> tags and property providers [2], but we can cross that bridge a bit later. Note: the Messages*.properties files should use UTF-8 encoding, which will allow Unicode characters to be used directly in the properties. I've already added the necessary <meta> tag to CoreGUI.html, to support rendering correctly: <meta http-equiv="content-type" content="text/html;charset=utf-8" /> If you have any questions, feel free to ping back. -joseph [1] - http://code.google.com/webtoolkit/doc/latest/DevGuideI18n.html#DevGuideStat… [2] - http://code.google.com/webtoolkit/doc/latest/DevGuideI18nLocale.html#Locale…

1 0

Custom JMX plugin problems
by Al Amyot 19 Nov '10

19 Nov '10

I previously had a simple customized JMX server working which included an application MBean with %engine% and %port% as dynamic parts of the name. It successfully discovered the MBean and a couple of metrics. Today, I tried to refine it so that it would discover all the MBeans and all by replacing a fixed string with the %interaction% variable to the objectName pattern and the new simple-property element for it. There are about 15 MBeans matching this pattern. The XML comment below illustrates a concrete MBean name. Now, the resource is not dynamically discovered so I tried manually adding it and get this error: There are no connection properties defined for ResourceType[id=10222, category=Server, name=Initiate JMX server, plugin=Initiate Hub] (At one point, in error, I changed the plugin name from "Initiate JMX" to "Initiate Hub". After some work, it nows accepts this new name.) This is the new plugin descriptor. Can anyone suggest what the problen night be? <plugin name="Initiate Hub" displayName="Initiate Hub JMX Interface" description="Extends the JMX Plugin to support the Initiate Mbeans" version="1.7" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="urn:xmlns:rhq-plugin" xmlns:c="urn:xmlns:rhq-configuration"> <depends plugin="JMX" useClasses="true"/> <server name="Initiate JMX server" supportsManualAdd="true" createDeletePolicy="both">  <service name="Initiate Interaction MBean" discovery="org.rhq.plugins.jmx.MBeanResourceDiscoveryComponent" class="org.rhq.plugins.jmx.MBeanResourceComponent" description="Initiate interaction metrics"> <runs-inside> <parent-resource-type name="JMX Server" plugin="JMX"/> </runs-inside> <plugin-configuration> <c:simple-property name="objectName" readOnly="true" default="com.initiatesystems:service=%engine%,category=Listeners,id=%por t%,type=Interactions,ixn=%interaction%"/>  <c:simple-property name="nameTemplate" default="{engine}:{port} {interaction}"/> <c:simple-property name="descriptionTemplate" default="Initiate Hub {engine} on port {port} Interaction [interaction}"/> <c:simple-property name="engine" type="string" description="Engine instance name"/> <c:simple-property name="port" type="integer" description="Listener port number"/> <c:simple-property name="interaction" type="string" description="Interaction type"/> </plugin-configuration> <metric displayName="Audit level for the specific interaction" etc... Al Amyot | Consultant Sierra Systems (eHealth): 204-926-4257 (T): 204-942-2575 (F): 204-942-2047 444 St. Mary Avenue, Suite 1050 Winnipeg, MB R3C 3T1 Management Consulting | System Integration | Managed Services website: www.SierraSystems.com <http://www.sierrasystems.com/> This email and/or any documents in this transmission is intended for the addressee(s) only and may contain legally privileged or confidential information. Any unauthorized use, disclosure, distribution, copying or dissemination is strictly prohibited. If you receive this transmission in error, please notify the sender immediately and return the original. Ce courriel et tout document dans cette transmission est destiné à la personne ou aux personnes à qui il est adressé. Il peut contenir des informations privilégiées ou confidentielles. Toute utilisation, divulgation, distribution, copie, ou diffusion non autorisée est strictement défendue. Si vous n'êtes pas le destinataire de ce message, veuillez en informer l'expéditeur immédiatement et lui remettre l'original.

3 7

Sync Repository gives succesfull message but there is no data
by Ezequiel Martin Rodriguez 18 Nov '10

18 Nov '10

Hi! I created my content-source and my repository and associated them. I used the generatePackageIndex() method from SimpleIndexParser class to generate my index-content.txt file. Can check it here: http://svn.rhq-project.org/repos/rhq/branches/HEIKO-EXP/modules/enterprise/… because it is not created by default. I checked in the content-index file to my svn repository. But when I sync I get no data. I also tried with a local folder but I've got the same output: Wed Nov 17 03:00:00 ARST 2010: Start synchronization of Repository [repoSVN] Wed Nov 17 03:00:00 ARST 2010: Getting currently known list of content source packages... Wed Nov 17 03:00:01 ARST 2010: Removing...0 Wed Nov 17 03:00:01 ARST 2010: Adding...0 Wed Nov 17 03:00:01 ARST 2010: Updating...0 Wed Nov 17 03:00:01 ARST 2010: MERGE COMPLETE. Lazy load enabled for source [prueba], skipping package bits sync for repo [repoSVN] Wed Nov 17 03:00:01 ARST 2010: Repository [repoSVN] completed syncing with no errors. What am I doing wrong? Thanks in advance, Ezequiel.

2 1

Sync Repository gives succesfull message but there is no data
by Ezequiel Martin Rodriguez 18 Nov '10

18 Nov '10

1 0

Tomcat response times
by Al Amyot 05 Nov '10

05 Nov '10

I've just configured a Tomcat server in RHQ and have two questions: 1) It appears you can't graph response times. From some of the past discussion, it appears this feature was removed as being not useful. Is that true? 2) According to the RHQ 3.0 release notes: It is now possible to do alerting on Call Time data ( Session Bean method stats, Web response times). This has been contributed by Frank Brüseke (Univ. Paderborn). I don't see call time as an option on the Alert Definition page and HTTP Response Time is not in the Metric drop down list (it IS enabled on the Monitor->Schedules page). Where /how can I configure an alert on HTTP response times? Al Amyot | Consultant Sierra Systems (eHealth): 204-926-4257 (T): 204-942-2575 (F): 204-942-2047 444 St. Mary Avenue, Suite 1050 Winnipeg, MB R3C 3T1 Management Consulting | System Integration | Managed Services website: www.SierraSystems.com <http://www.sierrasystems.com/> This email and/or any documents in this transmission is intended for the addressee(s) only and may contain legally privileged or confidential information. Any unauthorized use, disclosure, distribution, copying or dissemination is strictly prohibited. If you receive this transmission in error, please notify the sender immediately and return the original. Ce courriel et tout document dans cette transmission est destiné à la personne ou aux personnes à qui il est adressé. Il peut contenir des informations privilégiées ou confidentielles. Toute utilisation, divulgation, distribution, copie, ou diffusion non autorisée est strictement défendue. Si vous n'êtes pas le destinataire de ce message, veuillez en informer l'expéditeur immédiatement et lui remettre l'original.

2 1

RHQ 3 overview video from JUDCon 2010 Berlin session is available
by Heiko W.Rupp 02 Nov '10

02 Nov '10

Hi, I've made a video recording of my RHQ 3 overview talk available on vimeo: http://vimeo.com/16424369 Check it out! Heiko -- Reg. Adresse: Red Hat GmbH, Otto-Hahn-Strasse 20, 85609 Dornach bei München Handelsregister: Amtsgericht München HRB 153243 Geschaeftsführer: Brendan Lane, Charlie Peters, Michael Cunningham, Charles Cachera

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

rhq-users November 2010