Hello Phil:
Thank you for the response. Your suggested fix resolved the error.
However, I am unable to get the desired effect.
I am not able to prevent a Linux user from running/accessing a Java JAR file using SELinux categories.
I would appreciate any other hints to make this work.
Following are the details of what I did:
# semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemLow user_r xguest_u user SystemLow SystemLow xguest_r
# semanage user -m -r s0-s0:c0.c1023 user_u
# semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemLow-SystemHigh user_r xguest_u user SystemLow SystemLow xguest_r
# cat setrans.conf
# # Multi-Category Security translation table for SELinux # # Uncomment the following to disable translation libary # disable=1 # # Objects can be categorized with 0-1023 categories defined by the admin. # Objects can be in more than one category at a time. # Categories are stored in the system as c0-c1023. Users can use this # table to translate the categories into a more meaningful output. # Examples: # s0:c0=CompanyConfidential # s0:c1=PatientRecord # s0:c2=Unclassified # s0:c3=TopSecret # s0:c1,c3=CompanyConfidentialRedHat s0:c0=NetworkAdministrator s0:c1=Operator s0=SystemLow s0-s0:c0.c1023=SystemLow-SystemHigh s0:c0.c1023=SystemHigh
# service mcstrans restart Stopping mcstransd: [ OK ] Starting mcstransd: [ OK ]
# chcat -L s0:c0 NetworkAdministrator s0:c1 Operator s0 SystemLow s0-s0:c0.c1023 SystemLow-SystemHigh s0:c0.c1023 SystemHigh
# useradd foo
# useradd bar
# passwd foo Changing password for user foo. New password: Retype new password: passwd: all authentication tokens updated successfully.
# passwd bar Changing password for user bar. New password: Retype new password: passwd: all authentication tokens updated successfully.
# semanage login -a foo
# semanage login -a bar
# chcat -l -- +NetworkAdministrator foo
# chcat -l -- +Operator bar
# chcat -L -l bar foo bar: s0:c0.c1023,c1 <===== why is it not just s0:c1? foo: s0:c0.c1023,c0 <===== why is it not just just s0:c0?
# chcat -- +NetworkAdministrator /usr/local/soup/bin/Foo.jar
# ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar
Now Login as the 'foo' Linux user and notice that it can run Foo.jar as expected
$ whoami foo
$ id -Z user_u:user_r:user_t:SystemLow-SystemHigh
$ ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar
$ java -jar /usr/local/soup/bin/Foo.jar Hello Foo
Now login as the 'bar' Linux user and notice that it can also run Foo.jar which is NOT expected
$ whoami bar
$ id -Z user_u:user_r:user_t:SystemLow-SystemHigh
$ ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar
$ java -jar /usr/local/soup/bin/Foo.jar Hello Foo
Why is Linux user 'bar' able to run/access Foo.jar when its category doesn't match Foo.jar's category?
Following is how to create the Foo.jar file:
$ cat Foo.java public class Foo { public static void main(String[] args) { System.out.println("Hello Foo"); } }
$ cat manifest.txt Main-Class:
$ javac Foo.java
$ jar cvfe Foo.jar Foo Foo.class added manifest adding: Foo.class(in = 409) (out= 282)(deflated 31%)
Best Regards,
Bill
On 05/24/2017 04:39 PM, Philip Seeley wrote:
Hi Bill,
I think this was my mistake in transcribing. The user_u line after the "semanage user -m" command should be:
user_u user SystemLow SystemLow-SystemHigh user_r
So the command should have been:
semanage user -m -r s0-s0:c0.c1023 user_u
Or even:
semanage user -m -r SystemLow-SystemHigh user_u
Appologies for that.
Phil
Inactive hide details for Bill D ---25/05/2017 02:28:19---Hello Phil, I have tried your suggestion of extending the user_u defiBill D ---25/05/2017 02:28:19---Hello Phil, I have tried your suggestion of extending the user_u definition without
From: Bill D littus@icloud.com To: Philip Seeley pseeley@au1.ibm.com Cc: littus@icloud.com, selinux@lists.fedoraproject.org Date: 25/05/2017 02:28 Subject: Re: Controlling execution of Java JAR files with SELinux RBAC
Hello Phil,
I have tried your suggestion of extending the user_u definition without success:
# semanage user -l
Labeling MLS/ MLS/SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemLow user_r xguest_u user SystemLow SystemLow xguest_r
# semanage user -m -r s0:c0.c1023 user_u
# semanage user -l
Labeling MLS/ MLS/SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemHigh user_r xguest_u user SystemLow SystemLow xguest_r
# useradd kate
# passwd kate Changing password for user kate. New password: Retype new password: passwd: all authentication tokens updated successfully.
# semanage login -a kate libsemanage.validate_handler: MLS range s0 for Unix user regularuser exceeds allowed range s0:c0.c1023 for SELinux user user_u (No such file or directory). libsemanage.validate_handler: seuser mapping [regularuser -> (user_u, s0)] is invalid (No such file or directory). libsemanage.dbase_llist_iterate: could not iterate over records (No such file or directory). /usr/sbin/semanage: Could not commit semanage transaction
I would greatly appreciate any other hints to make this work.
Regards,
Bill
On 5/23/2017 8:42 PM, Philip Seeley wrote:
Hi Bill, This is probably because the default RHEL6 configuration does not include any categories in the user_u SELinux user's range: # semanage user -l Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles guest_u user s0 s0 guest_r root user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r staff_u user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r sysadm_u user s0 s0-s0:c0.c1023 sysadm_r system_u user s0 s0-s0:c0.c1023 system_r unconfined_r unconfined_u user s0 s0-s0:c0.c1023 system_r unconfined_r user_u user s0 s0 user_r You probably have to extend the user definition to include the categories you're using. As an example, this gives all categories: # semanage user -m -r s0:c0.c1023 user_u # semanage user -l Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles guest_u user s0 s0 guest_r root user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r staff_u user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r sysadm_u user s0 s0-s0:c0.c1023 sysadm_r system_u user s0 s0-s0:c0.c1023 system_r unconfined_r unconfined_u user s0 s0-s0:c0.c1023 system_r unconfined_r user_u user s0 s0:c0.c1023 user_r Hope that helps. Phil Inactive hide details for Bill Durant ---24/05/2017 12:34:53---Hello Phil: Thank you for the suggestion. I have tried the stepBill Durant ---24/05/2017 12:34:53---Hello Phil: Thank you for the suggestion. I have tried the steps from the URL that From: Bill Durant _<littus@icloud.com>_ <mailto:littus@icloud.com> To: Philip Seeley _<pseeley@au1.ibm.com>_ <mailto:pseeley@au1.ibm.com> Cc: _littus@icloud.com_ <mailto:littus@icloud.com>, _selinux@lists.fedoraproject.org_ <mailto:selinux@lists.fedoraproject.org> Date: 24/05/2017 12:34 Subject: Re: Controlling execution of Java JAR files with SELinux RBAC ------------------------------------------------------------------------ Hello Phil: Thank you for the suggestion. I have tried the steps from the URL that you provided without success. I get an error when I try to assign Linux user mary to an SELinux login as follows: # cat /etc/redhat-release CentOS release 6.9 (Final) ;;; Add "s0:c0=NetworkAdministrator" and "s0:c1=Operator" to /etc/selinux/targeted/setrans.conf # cat /etc/selinux/targeted/setrans.conf # # Multi-Category Security translation table for SELinux # # Uncomment the following to disable translation libary # disable=1 # # Objects can be categorized with 0-1023 categories defined by the admin. # Objects can be in more than one category at a time. # Categories are stored in the system as c0-c1023. Users can use this # table to translate the categories into a more meaningful output. # Examples: # s0:c0=CompanyConfidential # s0:c1=PatientRecord # s0:c2=Unclassified # s0:c3=TopSecret # s0:c1,c3=CompanyConfidentialRedHat s0:c0=NetworkAdministrator s0:c1=Operator s0=SystemLow s0-s0:c0.c1023=SystemLow-SystemHigh s0:c0.c1023=SystemHigh # service mcstrans start # chcat -L s0:c0 NetworkAdministrator s0:c1 Operator s0 SystemLow s0-s0:c0.c1023 SystemLow-SystemHigh s0:c0.c1023 SystemHigh # useradd mary # passwd mary Changing password for user mary. New password: Retype new password: passwd: all authentication tokens updated successfully. # semanage login -a mary # chcat -l -- +NetworkAdministrator mary libsemanage.validate_handler: MLS range s0-s0:c0 for Unix user mary exceeds allowed range s0 for SELinux user user_u (No such file or directory). libsemanage.validate_handler: seuser mapping [mary -> (user_u, s0-s0:c0)] is invalid (No such file or directory). libsemanage.dbase_llist_iterate: could not iterate over records (No such file or directory). /usr/sbin/semanage: Could not commit semanage transaction I would appreciate any hints on how to resolve that error. Thanks! Bill On 05/23/2017 05:49 PM, Philip Seeley wrote: Hi Bill, Have you thought about using categories?_ __https://www.centos.org/docs/5/html/Deployment_Guide-en-US/sec-mcs-getstarted.html_ Cheers Phil Inactive hide details for Bill D ---24/05/2017 09:52:00---Greetings: I have been trying to figure out how to control the executBill D ---24/05/2017 09:52:00---Greetings: I have been trying to figure out how to control the execution of Java From: Bill D _<littus@icloud.com>_ <mailto:littus@icloud.com> To: _selinux@lists.fedoraproject.org_ <mailto:selinux@lists.fedoraproject.org> Cc: _littus@icloud.com_ <mailto:littus@icloud.com> Date: 24/05/2017 09:52 Subject: Controlling execution of Java JAR files with SELinux RBAC ------------------------------------------------------------------------ Greetings: I have been trying to figure out how to control the execution of Java JAR files with SELinux RBAC. I have two Linux users named joe and mary and two Java JAR files named jack.jar and mary.jar. Here is how jack executes jack.jar: java -jar jack.jar Here is how mary executes mary.jar: java -jar mary.jar I would like SELinux RBAC to prevent jack from executing mary.jar and prevent mary from executing jack.jar. How to configure SELinux RBAC to make that happen? I have tried various approaches without success. I have also tried the steps in _http://forums.fedoraforum.org/archive/index.php/t-222938.html_ without success. I would greatly appreciate any hints. Regards, Bill _______________________________________________ selinux mailing list -- _selinux@lists.fedoraproject.org_ <mailto:selinux@lists.fedoraproject.org> To unsubscribe send an email to _selinux-leave@lists.fedoraproject.org_ <mailto:selinux-leave@lists.fedoraproject.org> _______________________________________________ selinux mailing list -- _selinux@lists.fedoraproject.org_ <mailto:selinux@lists.fedoraproject.org> To unsubscribe send an email to _selinux-leave@lists.fedoraproject.org_ <mailto:selinux-leave@lists.fedoraproject.org>
On Thu, 2017-05-25 at 12:19 -0700, Bill D wrote:
Hello Phil:
Thank you for the response. Your suggested fix resolved the error.
However, I am unable to get the desired effect.
I am not able to prevent a Linux user from running/accessing a Java JAR file using SELinux categories.
I would appreciate any other hints to make this work.
Following are the details of what I did:
# semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemLow user_r xguest_u user SystemLow SystemLow xguest_r
# semanage user -m -r s0-s0:c0.c1023 user_u
# semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemLow-SystemHigh user_r xguest_u user SystemLow SystemLow xguest_r
# cat setrans.conf
# # Multi-Category Security translation table for SELinux # # Uncomment the following to disable translation libary # disable=1 # # Objects can be categorized with 0-1023 categories defined by the admin. # Objects can be in more than one category at a time. # Categories are stored in the system as c0-c1023. Users can use this # table to translate the categories into a more meaningful output. # Examples: # s0:c0=CompanyConfidential # s0:c1=PatientRecord # s0:c2=Unclassified # s0:c3=TopSecret # s0:c1,c3=CompanyConfidentialRedHat s0:c0=NetworkAdministrator s0:c1=Operator s0=SystemLow s0-s0:c0.c1023=SystemLow-SystemHigh s0:c0.c1023=SystemHigh
# service mcstrans restart Stopping mcstransd: [ OK ] Starting mcstransd: [ OK ]
# chcat -L s0:c0 NetworkAdministrator s0:c1 Operator s0 SystemLow s0-s0:c0.c1023 SystemLow-SystemHigh s0:c0.c1023 SystemHigh
# useradd foo
# useradd bar
# passwd foo Changing password for user foo. New password: Retype new password: passwd: all authentication tokens updated successfully.
# passwd bar Changing password for user bar. New password: Retype new password: passwd: all authentication tokens updated successfully.
# semanage login -a foo
# semanage login -a bar
# chcat -l -- +NetworkAdministrator foo
# chcat -l -- +Operator bar
# chcat -L -l bar foo bar: s0:c0.c1023,c1 <===== why is it not just s0:c1? foo: s0:c0.c1023,c0 <===== why is it not just just s0:c0?
# chcat -- +NetworkAdministrator /usr/local/soup/bin/Foo.jar
# ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar
Now Login as the 'foo' Linux user and notice that it can run Foo.jar as expected
$ whoami foo
$ id -Z user_u:user_r:user_t:SystemLow-SystemHigh
$ ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar
$ java -jar /usr/local/soup/bin/Foo.jar Hello Foo
Now login as the 'bar' Linux user and notice that it can also run Foo.jar which is NOT expected
$ whoami bar
$ id -Z user_u:user_r:user_t:SystemLow-SystemHigh
$ ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar
$ java -jar /usr/local/soup/bin/Foo.jar Hello Foo
Why is Linux user 'bar' able to run/access Foo.jar when its category doesn't match Foo.jar's category?
Red Hat changed the way MCS works in modern versions of RHEL. It went from being a user-centric model to being something they only use to separate sandboxes, containers, VMs, openshift instances, etc. So a domain is only restricted by MCS if it is specifically marked as being MCS constrained.
MLS on the other hand is still applied to all domains except those explicitly exempted (trusted to cross levels).
Following is how to create the Foo.jar file:
$ cat Foo.java public class Foo { public static void main(String[] args) { System.out.println("Hello Foo"); } }
$ cat manifest.txt Main-Class:
$ javac Foo.java
$ jar cvfe Foo.jar Foo Foo.class added manifest adding: Foo.class(in = 409) (out= 282)(deflated 31%)
Best Regards,
Bill
On 05/24/2017 04:39 PM, Philip Seeley wrote:
Hi Bill,
I think this was my mistake in transcribing. The user_u line after the "semanage user -m" command should be: user_u user SystemLow SystemLow- SystemHigh user_r
So the command should have been:
semanage user -m -r s0-s0:c0.c1023 user_u
Or even:
semanage user -m -r SystemLow-SystemHigh user_u
Appologies for that.
Phil
Bill D ---25/05/2017 02:28:19---Hello Phil, I have tried your suggestion of extending the user_u definition without
From: Bill D littus@icloud.com To: Philip Seeley pseeley@au1.ibm.com Cc: littus@icloud.com, selinux@lists.fedoraproject.org Date: 25/05/2017 02:28 Subject: Re: Controlling execution of Java JAR files with SELinux RBAC
Hello Phil, I have tried your suggestion of extending the user_u definition without success: # semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow- SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow- SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow- SystemHigh sysadm_r system_u user SystemLow SystemLow- SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow- SystemHigh system_r unconfined_r user_u user SystemLow SystemLow user_r xguest_u user SystemLow SystemLow xguest_r # semanage user -m -r s0:c0.c1023 user_u # semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow- SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow- SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow- SystemHigh sysadm_r system_u user SystemLow SystemLow- SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow- SystemHigh system_r unconfined_r user_u user SystemLow SystemHigh user_r xguest_u user SystemLow SystemLow xguest_r # useradd kate # passwd kate Changing password for user kate. New password: Retype new password: passwd: all authentication tokens updated successfully. # semanage login -a kate libsemanage.validate_handler: MLS range s0 for Unix user regularuser exceeds allowed range s0:c0.c1023 for SELinux user user_u (No such file or directory). libsemanage.validate_handler: seuser mapping [regularuser -> (user_u, s0)] is invalid (No such file or directory). libsemanage.dbase_llist_iterate: could not iterate over records (No such file or directory). /usr/sbin/semanage: Could not commit semanage transaction I would greatly appreciate any other hints to make this work. Regards, Bill On 5/23/2017 8:42 PM, Philip Seeley wrote: Hi Bill,
This is probably because the default RHEL6 configuration does not include any categories in the user_u SELinux user's range:
# semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
guest_u user s0 s0 guest_r root user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r staff_u user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r sysadm_u user s0 s0-s0:c0.c1023 sysadm_r system_u user s0 s0-s0:c0.c1023 system_r unconfined_r unconfined_u user s0 s0-s0:c0.c1023 system_r unconfined_r user_u user s0 s0 user_r
You probably have to extend the user definition to include the categories you're using. As an example, this gives all categories:
# semanage user -m -r s0:c0.c1023 user_u
# semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
guest_u user s0 s0 guest_r root user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r staff_u user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r sysadm_u user s0 s0-s0:c0.c1023 sysadm_r system_u user s0 s0-s0:c0.c1023 system_r unconfined_r unconfined_u user s0 s0-s0:c0.c1023 system_r unconfined_r user_u user s0 s0:c0.c1023 user_r
Hope that helps.
Phil
Bill Durant ---24/05/2017 12:34:53---Hello Phil: Thank you for the suggestion. I have tried the steps from the URL that
From: Bill Durant littus@icloud.com To: Philip Seeley pseeley@au1.ibm.com Cc: littus@icloud.com, selinux@lists.fedoraproject.org Date: 24/05/2017 12:34 Subject: Re: Controlling execution of Java JAR files with SELinux RBAC
Hello Phil: Thank you for the suggestion. I have tried the steps from the URL that you provided without success. I get an error when I try to assign Linux user mary to an SELinux login as follows: # cat /etc/redhat-release CentOS release 6.9 (Final)
;;; Add "s0:c0=NetworkAdministrator" and "s0:c1=Operator" to /etc/selinux/targeted/setrans.conf
# cat /etc/selinux/targeted/setrans.conf # # Multi-Category Security translation table for SELinux # # Uncomment the following to disable translation libary # disable=1 # # Objects can be categorized with 0-1023 categories defined by the admin. # Objects can be in more than one category at a time. # Categories are stored in the system as c0-c1023. Users can use this # table to translate the categories into a more meaningful output. # Examples: # s0:c0=CompanyConfidential # s0:c1=PatientRecord # s0:c2=Unclassified # s0:c3=TopSecret # s0:c1,c3=CompanyConfidentialRedHat s0:c0=NetworkAdministrator s0:c1=Operator s0=SystemLow s0-s0:c0.c1023=SystemLow-SystemHigh s0:c0.c1023=SystemHigh
# service mcstrans start
# chcat -L s0:c0 NetworkAdministrator s0:c1 Operator s0 SystemLow s0-s0:c0.c1023 SystemLow-SystemHigh s0:c0.c1023 SystemHigh
# useradd mary # passwd mary Changing password for user mary. New password: Retype new password: passwd: all authentication tokens updated successfully.
# semanage login -a mary
# chcat -l -- +NetworkAdministrator mary libsemanage.validate_handler: MLS range s0-s0:c0 for Unix user mary exceeds allowed range s0 for SELinux user user_u (No such file or directory). libsemanage.validate_handler: seuser mapping [mary -> (user_u, s0- s0:c0)] is invalid (No such file or directory). libsemanage.dbase_llist_iterate: could not iterate over records (No such file or directory). /usr/sbin/semanage: Could not commit semanage transaction I would appreciate any hints on how to resolve that error. Thanks! Bill
On 05/23/2017 05:49 PM, Philip Seeley wrote: Hi Bill,
Have you thought about using categories?
https://www.centos.org/docs/5/html/Deployment_Guide-en-US/sec-mcs-g etstarted.html
Cheers
Phil
Bill D ---24/05/2017 09:52:00---Greetings: I have been trying to figure out how to control the execution of Java
From: Bill D littus@icloud.com To: selinux@lists.fedoraproject.org Cc: littus@icloud.com Date: 24/05/2017 09:52 Subject: Controlling execution of Java JAR files with SELinux RBAC
Greetings:
I have been trying to figure out how to control the execution of Java JAR files with SELinux RBAC.
I have two Linux users named joe and mary and two Java JAR files named jack.jar and mary.jar.
Here is how jack executes jack.jar: java -jar jack.jar
Here is how mary executes mary.jar: java -jar mary.jar
I would like SELinux RBAC to prevent jack from executing mary.jar and prevent mary from executing jack.jar.
How to configure SELinux RBAC to make that happen?
I have tried various approaches without success. I have also tried the steps in http://forums.fedoraforum.org/archive/index.php/t-222938.h tml without success.
I would greatly appreciate any hints.
Regards,
Bill
selinux mailing list -- selinux@lists.fedoraproject.org To unsubscribe send an email to selinux-leave@lists.fedoraproject.o rg
selinux mailing list -- selinux@lists.fedoraproject.org To unsubscribe send an email to selinux-leave@lists.fedoraproject.o rg
_______________________________________________ selinux mailing list -- selinux@lists.fedoraproject.org To unsubscribe send an email to selinux-leave@lists.fedoraproject.org
On 05/25/2017 01:21 PM, Stephen Smalley wrote:
On Thu, 2017-05-25 at 12:19 -0700, Bill D wrote:
Hello Phil:
Thank you for the response. Your suggested fix resolved the error.
However, I am unable to get the desired effect.
I am not able to prevent a Linux user from running/accessing a Java JAR file using SELinux categories.
I would appreciate any other hints to make this work.
Following are the details of what I did:
# semanage user -l
Labeling MLS/ MLS/SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemLow user_r xguest_u user SystemLow SystemLow xguest_r
# semanage user -m -r s0-s0:c0.c1023 user_u
# semanage user -l
Labeling MLS/ MLS/SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemLow-SystemHigh user_r xguest_u user SystemLow SystemLow xguest_r
# cat setrans.conf
# # Multi-Category Security translation table for SELinux # # Uncomment the following to disable translation libary # disable=1 # # Objects can be categorized with 0-1023 categories defined by the admin. # Objects can be in more than one category at a time. # Categories are stored in the system as c0-c1023. Users can use this # table to translate the categories into a more meaningful output. # Examples: # s0:c0=CompanyConfidential # s0:c1=PatientRecord # s0:c2=Unclassified # s0:c3=TopSecret # s0:c1,c3=CompanyConfidentialRedHat s0:c0=NetworkAdministrator s0:c1=Operator s0=SystemLow s0-s0:c0.c1023=SystemLow-SystemHigh s0:c0.c1023=SystemHigh
# service mcstrans restart Stopping mcstransd: [ OK ] Starting mcstransd: [ OK ]
# chcat -L s0:c0 NetworkAdministrator s0:c1 Operator s0 SystemLow s0-s0:c0.c1023 SystemLow-SystemHigh s0:c0.c1023 SystemHigh
# useradd foo
# useradd bar
# passwd foo Changing password for user foo. New password: Retype new password: passwd: all authentication tokens updated successfully.
# passwd bar Changing password for user bar. New password: Retype new password: passwd: all authentication tokens updated successfully.
# semanage login -a foo
# semanage login -a bar
# chcat -l -- +NetworkAdministrator foo
# chcat -l -- +Operator bar
# chcat -L -l bar foo bar: s0:c0.c1023,c1 <===== why is it not just s0:c1? foo: s0:c0.c1023,c0 <===== why is it not just just s0:c0?
# chcat -- +NetworkAdministrator /usr/local/soup/bin/Foo.jar
# ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar
Now Login as the 'foo' Linux user and notice that it can run Foo.jar as expected
$ whoami foo
$ id -Z user_u:user_r:user_t:SystemLow-SystemHigh
$ ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar
$ java -jar /usr/local/soup/bin/Foo.jar Hello Foo
Now login as the 'bar' Linux user and notice that it can also run Foo.jar which is NOT expected
$ whoami bar
$ id -Z user_u:user_r:user_t:SystemLow-SystemHigh
$ ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar
$ java -jar /usr/local/soup/bin/Foo.jar Hello Foo
Why is Linux user 'bar' able to run/access Foo.jar when its category doesn't match Foo.jar's category?
Red Hat changed the way MCS works in modern versions of RHEL. It went from being a user-centric model to being something they only use to separate sandboxes, containers, VMs, openshift instances, etc. So a domain is only restricted by MCS if it is specifically marked as being MCS constrained.
How to mark a file's domain/type as MCS constrained? Or is that not possible?
MLS on the other hand is still applied to all domains except those explicitly exempted (trusted to cross levels).
I would greatly appreciate any hints on how to use MLS to control file access.
Thanks!
Bill
Following is how to create the Foo.jar file:
$ cat Foo.java public class Foo { public static void main(String[] args) { System.out.println("Hello Foo"); } }
$ cat manifest.txt Main-Class:
$ javac Foo.java
$ jar cvfe Foo.jar Foo Foo.class added manifest adding: Foo.class(in = 409) (out= 282)(deflated 31%)
Best Regards,
Bill
On 05/24/2017 04:39 PM, Philip Seeley wrote:
Hi Bill,
I think this was my mistake in transcribing. The user_u line after the "semanage user -m" command should be: user_u user SystemLow SystemLow- SystemHigh user_r
So the command should have been:
semanage user -m -r s0-s0:c0.c1023 user_u
Or even:
semanage user -m -r SystemLow-SystemHigh user_u
Appologies for that.
Phil
Bill D ---25/05/2017 02:28:19---Hello Phil, I have tried your suggestion of extending the user_u definition without
From: Bill D littus@icloud.com To: Philip Seeley pseeley@au1.ibm.com Cc: littus@icloud.com, selinux@lists.fedoraproject.org Date: 25/05/2017 02:28 Subject: Re: Controlling execution of Java JAR files with SELinux RBAC
Hello Phil, I have tried your suggestion of extending the user_u definition without success: # semanage user -l
Labeling MLS/MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow- SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow- SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow- SystemHigh sysadm_r system_u user SystemLow SystemLow- SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow- SystemHigh system_r unconfined_r user_u user SystemLow SystemLow user_r xguest_u user SystemLow SystemLow xguest_r # semanage user -m -r s0:c0.c1023 user_u # semanage user -l
Labeling MLS/MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow- SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow- SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow- SystemHigh sysadm_r system_u user SystemLow SystemLow- SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow- SystemHigh system_r unconfined_r user_u user SystemLow SystemHigh user_r xguest_u user SystemLow SystemLow xguest_r # useradd kate # passwd kate Changing password for user kate. New password: Retype new password: passwd: all authentication tokens updated successfully. # semanage login -a kate libsemanage.validate_handler: MLS range s0 for Unix user regularuser exceeds allowed range s0:c0.c1023 for SELinux user user_u (No such file or directory). libsemanage.validate_handler: seuser mapping [regularuser -> (user_u, s0)] is invalid (No such file or directory). libsemanage.dbase_llist_iterate: could not iterate over records (No such file or directory). /usr/sbin/semanage: Could not commit semanage transaction I would greatly appreciate any other hints to make this work. Regards, Bill On 5/23/2017 8:42 PM, Philip Seeley wrote: Hi Bill,
This is probably because the default RHEL6 configuration does not include any categories in the user_u SELinux user's range:
# semanage user -l
Labeling MLS/ MLS/SELinux User Prefix MCS Level MCS Range SELinux Roles
guest_u user s0 s0 guest_r root user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r staff_u user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r sysadm_u user s0 s0-s0:c0.c1023 sysadm_r system_u user s0 s0-s0:c0.c1023 system_r unconfined_r unconfined_u user s0 s0-s0:c0.c1023 system_r unconfined_r user_u user s0 s0 user_r
You probably have to extend the user definition to include the categories you're using. As an example, this gives all categories:
# semanage user -m -r s0:c0.c1023 user_u
# semanage user -l
Labeling MLS/ MLS/SELinux User Prefix MCS Level MCS Range SELinux Roles
guest_u user s0 s0 guest_r root user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r staff_u user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r sysadm_u user s0 s0-s0:c0.c1023 sysadm_r system_u user s0 s0-s0:c0.c1023 system_r unconfined_r unconfined_u user s0 s0-s0:c0.c1023 system_r unconfined_r user_u user s0 s0:c0.c1023 user_r
Hope that helps.
Phil
Bill Durant ---24/05/2017 12:34:53---Hello Phil: Thank you for the suggestion. I have tried the steps from the URL that
From: Bill Durant littus@icloud.com To: Philip Seeley pseeley@au1.ibm.com Cc: littus@icloud.com, selinux@lists.fedoraproject.org Date: 24/05/2017 12:34 Subject: Re: Controlling execution of Java JAR files with SELinux RBAC
Hello Phil: Thank you for the suggestion. I have tried the steps from the URL that you provided without success. I get an error when I try to assign Linux user mary to an SELinux login as follows: # cat /etc/redhat-release CentOS release 6.9 (Final)
;;; Add "s0:c0=NetworkAdministrator" and "s0:c1=Operator" to /etc/selinux/targeted/setrans.conf
# cat /etc/selinux/targeted/setrans.conf # # Multi-Category Security translation table for SELinux # # Uncomment the following to disable translation libary # disable=1 # # Objects can be categorized with 0-1023 categories defined by the admin. # Objects can be in more than one category at a time. # Categories are stored in the system as c0-c1023. Users can use this # table to translate the categories into a more meaningful output. # Examples: # s0:c0=CompanyConfidential # s0:c1=PatientRecord # s0:c2=Unclassified # s0:c3=TopSecret # s0:c1,c3=CompanyConfidentialRedHat s0:c0=NetworkAdministrator s0:c1=Operator s0=SystemLow s0-s0:c0.c1023=SystemLow-SystemHigh s0:c0.c1023=SystemHigh
# service mcstrans start
# chcat -L s0:c0 NetworkAdministrator s0:c1 Operator s0 SystemLow s0-s0:c0.c1023 SystemLow-SystemHigh s0:c0.c1023 SystemHigh
# useradd mary # passwd mary Changing password for user mary. New password: Retype new password: passwd: all authentication tokens updated successfully.
# semanage login -a mary
# chcat -l -- +NetworkAdministrator mary libsemanage.validate_handler: MLS range s0-s0:c0 for Unix user mary exceeds allowed range s0 for SELinux user user_u (No such file or directory). libsemanage.validate_handler: seuser mapping [mary -> (user_u, s0- s0:c0)] is invalid (No such file or directory). libsemanage.dbase_llist_iterate: could not iterate over records (No such file or directory). /usr/sbin/semanage: Could not commit semanage transaction I would appreciate any hints on how to resolve that error. Thanks! Bill
On 05/23/2017 05:49 PM, Philip Seeley wrote: Hi Bill,
Have you thought about using categories?
https://www.centos.org/docs/5/html/Deployment_Guide-en-US/sec-mcs-g etstarted.html
Cheers
Phil
Bill D ---24/05/2017 09:52:00---Greetings: I have been trying to figure out how to control the execution of Java
From: Bill D littus@icloud.com To: selinux@lists.fedoraproject.org Cc: littus@icloud.com Date: 24/05/2017 09:52 Subject: Controlling execution of Java JAR files with SELinux RBAC
Greetings:
I have been trying to figure out how to control the execution of Java JAR files with SELinux RBAC.
I have two Linux users named joe and mary and two Java JAR files named jack.jar and mary.jar.
Here is how jack executes jack.jar: java -jar jack.jar
Here is how mary executes mary.jar: java -jar mary.jar
I would like SELinux RBAC to prevent jack from executing mary.jar and prevent mary from executing jack.jar.
How to configure SELinux RBAC to make that happen?
I have tried various approaches without success. I have also tried the steps in http://forums.fedoraforum.org/archive/index.php/t-222938.h tml without success.
I would greatly appreciate any hints.
Regards,
Bill
selinux mailing list -- selinux@lists.fedoraproject.org To unsubscribe send an email to selinux-leave@lists.fedoraproject.o rg
selinux mailing list -- selinux@lists.fedoraproject.org To unsubscribe send an email to selinux-leave@lists.fedoraproject.o rg
selinux mailing list -- selinux@lists.fedoraproject.org To unsubscribe send an email to selinux-leave@lists.fedoraproject.org
Hi Bill,
I saw in a previous post that you were using CentOS 6.9 so this should work for you. It looks like the login configuration is not quite right as both users are showing SystemLow-SystemHigh when they logon.
Check the login config shows they only have the categories they need, i.e. jack has c0 and mary has c1.
If they're not correct try setting the categories rather than adding to them with a "+":
[root@centos6 ~]# chcat -l -- c0 jack [root@centos6 ~]# chcat -l -- c1 mary
[root@centos6 ~]# semanage login -l
Login Name SELinux User MLS/MCS Range
__default__ unconfined_u s0-s0:c0.c1023 jack user_u s0-s0:c0 mary user_u s0-s0:c1 root unconfined_u s0-s0:c0.c1023 system_u system_u s0-s0:c0.c1023
Then with:
# ll -Z /usr/local/bin/ -rw-r--r--. root root unconfined_u:object_r:bin_t:s0:c0 jack -rw-r--r--. root root unconfined_u:object_r:bin_t:s0:c1 mary [root@centos6 ~]# cat /etc/system-release CentOS release 6.9 (Final)
as jack:
[jack@centos6 ~]$ id uid=500(jack) gid=500(jack) groups=500(jack) context=user_u:user_r:user_t:s0-s0:c0 [jack@centos6 ~]$ cat /usr/local/bin/jack Hi [jack@centos6 ~]$ cat /usr/local/bin/mary cat: /usr/local/bin/mary: Permission denied
and as mary:
[mary@centos6 ~]$ id uid=501(mary) gid=501(mary) groups=501(mary) context=user_u:user_r:user_t:s0-s0:c1 [mary@centos6 ~]$ cat /usr/local/bin/jack cat: /usr/local/bin/jack: Permission denied [mary@centos6 ~]$ cat /usr/local/bin/mary Hi
Cheers
Phil
From: Bill D littus@icloud.com To: Philip Seeley pseeley@au1.ibm.com Cc: littus@icloud.com, selinux@lists.fedoraproject.org Date: 26/05/2017 05:19 Subject: Re: Controlling execution of Java JAR files with SELinux RBAC
Hello Phil:
Thank you for the response. Your suggested fix resolved the error.
However, I am unable to get the desired effect.
I am not able to prevent a Linux user from running/accessing a Java JAR file using SELinux categories.
I would appreciate any other hints to make this work.
Following are the details of what I did:
# semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemLow user_r xguest_u user SystemLow SystemLow xguest_r
# semanage user -m -r s0-s0:c0.c1023 user_u
# semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemLow-SystemHigh user_r xguest_u user SystemLow SystemLow xguest_r
# cat setrans.conf
# # Multi-Category Security translation table for SELinux # # Uncomment the following to disable translation libary # disable=1 # # Objects can be categorized with 0-1023 categories defined by the admin. # Objects can be in more than one category at a time. # Categories are stored in the system as c0-c1023. Users can use this # table to translate the categories into a more meaningful output. # Examples: # s0:c0=CompanyConfidential # s0:c1=PatientRecord # s0:c2=Unclassified # s0:c3=TopSecret # s0:c1,c3=CompanyConfidentialRedHat s0:c0=NetworkAdministrator s0:c1=Operator s0=SystemLow s0-s0:c0.c1023=SystemLow-SystemHigh s0:c0.c1023=SystemHigh
# service mcstrans restart Stopping mcstransd: [ OK ] Starting mcstransd: [ OK ]
# chcat -L s0:c0 NetworkAdministrator s0:c1 Operator s0 SystemLow s0-s0:c0.c1023 SystemLow-SystemHigh s0:c0.c1023 SystemHigh
# useradd foo
# useradd bar
# passwd foo Changing password for user foo. New password: Retype new password: passwd: all authentication tokens updated successfully.
# passwd bar Changing password for user bar. New password: Retype new password: passwd: all authentication tokens updated successfully.
# semanage login -a foo
# semanage login -a bar
# chcat -l -- +NetworkAdministrator foo
# chcat -l -- +Operator bar
# chcat -L -l bar foo bar: s0:c0.c1023,c1 <===== why is it not just s0:c1? foo: s0:c0.c1023,c0 <===== why is it not just just s0:c0?
# chcat -- +NetworkAdministrator /usr/local/soup/bin/Foo.jar
# ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar
Now Login as the 'foo' Linux user and notice that it can run Foo.jar as expected
$ whoami foo
$ id -Z user_u:user_r:user_t:SystemLow-SystemHigh
$ ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar
$ java -jar /usr/local/soup/bin/Foo.jar Hello Foo
Now login as the 'bar' Linux user and notice that it can also run Foo.jar which is NOT expected
$ whoami bar
$ id -Z user_u:user_r:user_t:SystemLow-SystemHigh
$ ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar
$ java -jar /usr/local/soup/bin/Foo.jar Hello Foo
Why is Linux user 'bar' able to run/access Foo.jar when its category doesn't match Foo.jar's category?
Following is how to create the Foo.jar file:
$ cat Foo.java public class Foo { public static void main(String[] args) { System.out.println("Hello Foo"); } }
$ cat manifest.txt Main-Class:
$ javac Foo.java
$ jar cvfe Foo.jar Foo Foo.class added manifest adding: Foo.class(in = 409) (out= 282)(deflated 31%)
Best Regards,
Bill
On 05/24/2017 04:39 PM, Philip Seeley wrote:
Hi Bill,
I think this was my mistake in transcribing. The user_u line after the "semanage user -m" command should be:
user_u user SystemLow SystemLow-SystemHigh user_r
So the command should have been:
semanage user -m -r s0-s0:c0.c1023 user_u
Or even:
semanage user -m -r SystemLow-SystemHigh user_u
Appologies for that.
Phil
Inactive hide details for Bill D ---25/05/2017 02:28:19---Hello Phil, I have tried your suggestion of extending the user_u defiBill D ---25/05/2017 02:28:19---Hello Phil, I have tried your suggestion of extending the user_u definition without
From: Bill D littus@icloud.com To: Philip Seeley pseeley@au1.ibm.com Cc: littus@icloud.com, selinux@lists.fedoraproject.org Date: 25/05/2017 02:28 Subject: Re: Controlling execution of Java JAR files with SELinux RBAC
Hello Phil,
I have tried your suggestion of extending the user_u definition without success:
# semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemLow user_r xguest_u user SystemLow SystemLow xguest_r
# semanage user -m -r s0:c0.c1023 user_u
# semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemHigh user_r xguest_u user SystemLow SystemLow xguest_r
# useradd kate
# passwd kate Changing password for user kate. New password: Retype new password: passwd: all authentication tokens updated successfully.
# semanage login -a kate libsemanage.validate_handler: MLS range s0 for Unix user regularuser exceeds allowed range s0:c0.c1023 for SELinux user user_u (No such file or directory). libsemanage.validate_handler: seuser mapping [regularuser -> (user_u, s0)] is invalid (No such file or directory). libsemanage.dbase_llist_iterate: could not iterate over records (No such file or directory). /usr/sbin/semanage: Could not commit semanage transaction
I would greatly appreciate any other hints to make this work.
Regards,
Bill
On 5/23/2017 8:42 PM, Philip Seeley wrote:
Hi Bill,
This is probably because the default RHEL6 configuration does not include any categories in the user_u SELinux user's range:
# semanage user -l
Labeling MLS/ MLS/
SELinux User Prefix MCS Level MCS Range SELinux Roles
guest_u user s0 s0 guest_r root user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r staff_u user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r sysadm_u user s0 s0-s0:c0.c1023 sysadm_r system_u user s0 s0-s0:c0.c1023 system_r unconfined_r unconfined_u user s0 s0-s0:c0.c1023 system_r unconfined_r user_u user s0 s0 user_r
You probably have to extend the user definition to include the categories you're using. As an example, this gives all categories:
# semanage user -m -r s0:c0.c1023 user_u
# semanage user -l
Labeling MLS/ MLS/
SELinux User Prefix MCS Level MCS Range SELinux Roles
guest_u user s0 s0 guest_r root user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r staff_u user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r sysadm_u user s0 s0-s0:c0.c1023 sysadm_r system_u user s0 s0-s0:c0.c1023 system_r unconfined_r unconfined_u user s0 s0-s0:c0.c1023 system_r unconfined_r user_u user s0 s0:c0.c1023 user_r
Hope that helps.
Phil
Inactive hide details for Bill Durant ---24/05/2017 12:34:53---Hello Phil: Thank you for the suggestion. I have tried the stepBill Durant ---24/05/2017 12:34:53---Hello Phil: Thank you for the suggestion. I have tried the steps from the URL that
From: Bill Durant littus@icloud.com To: Philip Seeley pseeley@au1.ibm.com Cc: littus@icloud.com, selinux@lists.fedoraproject.org Date: 24/05/2017 12:34 Subject: Re: Controlling execution of Java JAR files with SELinux RBAC
Hello Phil:
Thank you for the suggestion. I have tried the steps from the URL that you provided without success.
I get an error when I try to assign Linux user mary to an SELinux login as follows:
# cat /etc/redhat-release CentOS release 6.9 (Final)
;;; Add "s0:c0=NetworkAdministrator" and "s0:c1=Operator" to /etc/selinux/targeted/setrans.conf
# cat /etc/selinux/targeted/setrans.conf # # Multi-Category Security translation table for SELinux # # Uncomment the following to disable translation libary # disable=1 # # Objects can be categorized with 0-1023 categories defined by the admin. # Objects can be in more than one category at a time. # Categories are stored in the system as c0-c1023. Users can use this # table to translate the categories into a more meaningful output. # Examples: # s0:c0=CompanyConfidential # s0:c1=PatientRecord # s0:c2=Unclassified # s0:c3=TopSecret # s0:c1,c3=CompanyConfidentialRedHat s0:c0=NetworkAdministrator s0:c1=Operator s0=SystemLow s0-s0:c0.c1023=SystemLow-SystemHigh s0:c0.c1023=SystemHigh
# service mcstrans start
# chcat -L s0:c0 NetworkAdministrator s0:c1 Operator s0 SystemLow s0-s0:c0.c1023 SystemLow-SystemHigh s0:c0.c1023 SystemHigh
# useradd mary # passwd mary Changing password for user mary. New password: Retype new password: passwd: all authentication tokens updated successfully.
# semanage login -a mary
# chcat -l -- +NetworkAdministrator mary libsemanage.validate_handler: MLS range s0-s0:c0 for Unix user mary exceeds allowed range s0 for SELinux user user_u (No such file or directory). libsemanage.validate_handler: seuser mapping [mary -> (user_u, s0-s0:c0)] is invalid (No such file or directory). libsemanage.dbase_llist_iterate: could not iterate over records (No such file or directory). /usr/sbin/semanage: Could not commit semanage transaction
I would appreciate any hints on how to resolve that error.
Thanks!
Bill
On 05/23/2017 05:49 PM, Philip Seeley wrote:
Hi Bill,
Have you thought about using categories?
https://www.centos.org/docs/5/html/Deployment_Guide-en-US/sec-mcs-getstarted...
Cheers
Phil
Inactive hide details for Bill D ---24/05/2017 09:52:00---Greetings: I have been trying to figure out how to control the executBill D ---24/05/2017 09:52:00---Greetings: I have been trying to figure out how to control the execution of Java
From: Bill D littus@icloud.com To: selinux@lists.fedoraproject.org Cc: littus@icloud.com Date: 24/05/2017 09:52 Subject: Controlling execution of Java JAR files with SELinux RBAC
Greetings:
I have been trying to figure out how to control the execution of Java JAR files with SELinux RBAC.
I have two Linux users named joe and mary and two Java JAR files named jack.jar and mary.jar.
Here is how jack executes jack.jar: java -jar jack.jar
Here is how mary executes mary.jar: java -jar mary.jar
I would like SELinux RBAC to prevent jack from executing mary.jar and prevent mary from executing jack.jar.
How to configure SELinux RBAC to make that happen?
I have tried various approaches without success. I have also tried the steps in http://forums.fedoraforum.org/archive/index.php/t-222938.html
without success.
I would greatly appreciate any hints.
Regards,
Bill
_______________________________________________
selinux mailing list -- selinux@lists.fedoraproject.org To unsubscribe send an email to selinux-leave@lists.fedoraproject.org
_______________________________________________
selinux mailing list -- selinux@lists.fedoraproject.org To unsubscribe send an email to selinux-leave@lists.fedoraproject.org
Hello Phil:
Setting the categories instead of adding them with the "+" worked!
So it sounds like the chcat "+" option is not working as expected on CentOS 6.9. Do you concur?
Thank you for your help Phil.
The following series of steps show that it now works as expected:
# uname -a
Linux es300h 2.6.32-696.1.1.el6.x86_64 #1 SMP Tue Apr 11 17:13:24 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
# cat /etc/redhat-release CentOS release 6.9 (Final)
# semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user s0 s0 git_shell_r green_u user s0 s0 green_r guest_u user s0 s0 guest_r red_u user s0 s0 red_r root user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r staff_u user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r sysadm_u user s0 s0-s0:c0.c1023 sysadm_r system_u user s0 s0-s0:c0.c1023 system_r unconfined_r unconfined_u user s0 s0-s0:c0.c1023 system_r unconfined_r user_u user s0 s0 user_r xguest_u user s0 s0 xguest_r
# semanage user -m -r s0-s0:c0.c1023 user_u
# semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user s0 s0 git_shell_r green_u user s0 s0 green_r guest_u user s0 s0 guest_r red_u user s0 s0 red_r root user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r staff_u user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r sysadm_u user s0 s0-s0:c0.c1023 sysadm_r system_u user s0 s0-s0:c0.c1023 system_r unconfined_r unconfined_u user s0 s0-s0:c0.c1023 system_r unconfined_r user_u user s0 s0-s0:c0.c1023 user_r xguest_u user s0 s0 xguest_r
# cat /etc/selinux/targeted/setrans.conf # # Multi-Category Security translation table for SELinux # # Uncomment the following to disable translation libary # disable=1 # # Objects can be categorized with 0-1023 categories defined by the admin. # Objects can be in more than one category at a time. # Categories are stored in the system as c0-c1023. Users can use this # table to translate the categories into a more meaningful output. # Examples: # s0:c0=CompanyConfidential # s0:c1=PatientRecord # s0:c2=Unclassified # s0:c3=TopSecret # s0:c1,c3=CompanyConfidentialRedHat s0:c0=NetworkAdministrator s0:c1=Operator s0=SystemLow s0-s0:c0.c1023=SystemLow-SystemHigh s0:c0.c1023=SystemHigh
# service mcstrans restart Stopping mcstransd: [ OK ] Starting mcstransd: [ OK ]
# chcat -L s0:c0 NetworkAdministrator s0:c1 Operator s0 SystemLow s0-s0:c0.c1023 SystemLow-SystemHigh s0:c0.c1023 SystemHigh
# useradd foo
# useradd bar
# passwd foo Changing password for user foo. New password: Retype new password: passwd: all authentication tokens updated successfully.
# passwd bar Changing password for user bar. New password: Retype new password: passwd: all authentication tokens updated successfully.
# semanage login -a foo
# semanage login -a bar
# chcat -l -- c0 foo
# chcat -l -- c1 bar
# semanage login -l
Login Name SELinux User MLS/MCS Range
__default__ unconfined_u SystemLow-SystemHigh bar user_u SystemLow-Operator foo user_u SystemLow-NetworkAdministrator root unconfined_u SystemLow-SystemHigh system_u system_u SystemLow-SystemHigh
# chcat -L -l foo bar foo: NetworkAdministrator bar: Operator
# chcat -- +NetworkAdministrator /usr/local/soup/bin/foo.jar
# ls -Z /usr/local/soup/bin/foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/foo.jar
Now as the Linux user, foo, it works as expected:
$ whoami foo
$ id -Z user_u:user_r:user_t:SystemLow-NetworkAdministrator
$ java -jar /usr/local/soup/bin/foo.jar
Hello from the foo application
Now as the Linux user, bar, it also works as expected:
$ whoami bar
$ id -Z user_u:user_r:user_t:SystemLow-Operator
$ java -jar /usr/local/soup/bin/foo.jar Error: Unable to access jarfile /usr/local/soup/bin/foo.jar
Regards,
Bill
On 05/28/2017 05:22 PM, Philip Seeley wrote:
Hi Bill,
I saw in a previous post that you were using CentOS 6.9 so this should work for you. It looks like the login configuration is not quite right as both users are showing SystemLow-SystemHigh when they logon.
Check the login config shows they only have the categories they need, i.e. jack has c0 and mary has c1.
If they're not correct try setting the categories rather than adding to them with a "+":
[root@centos6 ~]# chcat -l -- c0 jack [root@centos6 ~]# chcat -l -- c1 mary
[root@centos6 ~]# semanage login -l
Login Name SELinux User MLS/MCS Range
__default__ unconfined_u s0-s0:c0.c1023 jack user_u s0-s0:c0 mary user_u s0-s0:c1 root unconfined_u s0-s0:c0.c1023 system_u system_u s0-s0:c0.c1023
Then with:
# ll -Z /usr/local/bin/ -rw-r--r--. root root unconfined_u:object_r:bin_t:s0:c0 jack -rw-r--r--. root root unconfined_u:object_r:bin_t:s0:c1 mary [root@centos6 ~]# cat /etc/system-release CentOS release 6.9 (Final)
as jack:
[jack@centos6 ~]$ id uid=500(jack) gid=500(jack) groups=500(jack) context=user_u:user_r:user_t:s0-s0:c0 [jack@centos6 ~]$ cat /usr/local/bin/jack Hi [jack@centos6 ~]$ cat /usr/local/bin/mary cat: /usr/local/bin/mary: Permission denied
and as mary:
[mary@centos6 ~]$ id uid=501(mary) gid=501(mary) groups=501(mary) context=user_u:user_r:user_t:s0-s0:c1 [mary@centos6 ~]$ cat /usr/local/bin/jack cat: /usr/local/bin/jack: Permission denied [mary@centos6 ~]$ cat /usr/local/bin/mary Hi
Cheers
Phil
Inactive hide details for Bill D ---26/05/2017 05:19:44---Hello Phil: Thank you for the response. Your suggested fix resolved Bill D ---26/05/2017 05:19:44---Hello Phil: Thank you for the response. Your suggested fix resolved the error.
From: Bill D littus@icloud.com To: Philip Seeley pseeley@au1.ibm.com Cc: littus@icloud.com, selinux@lists.fedoraproject.org Date: 26/05/2017 05:19 Subject: Re: Controlling execution of Java JAR files with SELinux RBAC
Hello Phil:
Thank you for the response. Your suggested fix resolved the error.
However, I am unable to get the desired effect.
I am not able to prevent a Linux user from running/accessing a Java JAR file using SELinux categories.
I would appreciate any other hints to make this work.
Following are the details of what I did:
# semanage user -l
Labeling MLS/ MLS/SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemLow user_r xguest_u user SystemLow SystemLow xguest_r
# semanage user -m -r s0-s0:c0.c1023 user_u
# semanage user -l
Labeling MLS/ MLS/SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemLow-SystemHigh user_r xguest_u user SystemLow SystemLow xguest_r
# cat setrans.conf
# # Multi-Category Security translation table for SELinux # # Uncomment the following to disable translation libary # disable=1 # # Objects can be categorized with 0-1023 categories defined by the admin. # Objects can be in more than one category at a time. # Categories are stored in the system as c0-c1023. Users can use this # table to translate the categories into a more meaningful output. # Examples: # s0:c0=CompanyConfidential # s0:c1=PatientRecord # s0:c2=Unclassified # s0:c3=TopSecret # s0:c1,c3=CompanyConfidentialRedHat s0:c0=NetworkAdministrator s0:c1=Operator s0=SystemLow s0-s0:c0.c1023=SystemLow-SystemHigh s0:c0.c1023=SystemHigh
# service mcstrans restart Stopping mcstransd: [ OK ] Starting mcstransd: [ OK ]
# chcat -L s0:c0 NetworkAdministrator s0:c1 Operator s0 SystemLow s0-s0:c0.c1023 SystemLow-SystemHigh s0:c0.c1023 SystemHigh
# useradd foo
# useradd bar
# passwd foo Changing password for user foo. New password: Retype new password: passwd: all authentication tokens updated successfully.
# passwd bar Changing password for user bar. New password: Retype new password: passwd: all authentication tokens updated successfully.
# semanage login -a foo
# semanage login -a bar
# chcat -l -- +NetworkAdministrator foo
# chcat -l -- +Operator bar
# chcat -L -l bar foo bar: s0:c0.c1023,c1 <===== why is it not just s0:c1? foo: s0:c0.c1023,c0 <===== why is it not just just s0:c0?
# chcat -- +NetworkAdministrator /usr/local/soup/bin/Foo.jar
# ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar
Now Login as the 'foo' Linux user and notice that it can run Foo.jar as expected
$ whoami foo
$ id -Z user_u:user_r:user_t:SystemLow-SystemHigh
$ ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar
$ java -jar /usr/local/soup/bin/Foo.jar Hello Foo
Now login as the 'bar' Linux user and notice that it can also run Foo.jar which is NOT expected
$ whoami bar
$ id -Z user_u:user_r:user_t:SystemLow-SystemHigh
$ ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar
$ java -jar /usr/local/soup/bin/Foo.jar Hello Foo
Why is Linux user 'bar' able to run/access Foo.jar when its category doesn't match Foo.jar's category?
Following is how to create the Foo.jar file:
$ cat Foo.java public class Foo { public static void main(String[] args) { System.out.println("Hello Foo"); } }
$ cat manifest.txt Main-Class:
$ javac Foo.java
$ jar cvfe Foo.jar Foo Foo.class added manifest adding: Foo.class(in = 409) (out= 282)(deflated 31%)
Best Regards,
Bill
On 05/24/2017 04:39 PM, Philip Seeley wrote:
Hi Bill, I think this was my mistake in transcribing. The user_u line after the "semanage user -m" command should be: user_u user SystemLow SystemLow-SystemHigh user_r So the command should have been: semanage user -m -r s0-s0:c0.c1023 user_u Or even: semanage user -m -r SystemLow-SystemHigh user_u Appologies for that. Phil Inactive hide details for Bill D ---25/05/2017 02:28:19---Hello Phil, I have tried your suggestion of extending the user_u defiBill D ---25/05/2017 02:28:19---Hello Phil, I have tried your suggestion of extending the user_u definition without From: Bill D _<littus@icloud.com>_ <mailto:littus@icloud.com> To: Philip Seeley _<pseeley@au1.ibm.com>_ <mailto:pseeley@au1.ibm.com> Cc: _littus@icloud.com_ <mailto:littus@icloud.com>, _selinux@lists.fedoraproject.org_ <mailto:selinux@lists.fedoraproject.org> Date: 25/05/2017 02:28 Subject: Re: Controlling execution of Java JAR files with SELinux RBAC ------------------------------------------------------------------------ Hello Phil, I have tried your suggestion of extending the user_u definition without success: # semanage user -l Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemLow user_r xguest_u user SystemLow SystemLow xguest_r # semanage user -m -r s0:c0.c1023 user_u # semanage user -l Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemHigh user_r xguest_u user SystemLow SystemLow xguest_r # useradd kate # passwd kate Changing password for user kate. New password: Retype new password: passwd: all authentication tokens updated successfully. # semanage login -a kate libsemanage.validate_handler: MLS range s0 for Unix user regularuser exceeds allowed range s0:c0.c1023 for SELinux user user_u (No such file or directory). libsemanage.validate_handler: seuser mapping [regularuser -> (user_u, s0)] is invalid (No such file or directory). libsemanage.dbase_llist_iterate: could not iterate over records (No such file or directory). /usr/sbin/semanage: Could not commit semanage transaction I would greatly appreciate any other hints to make this work. Regards, Bill On 5/23/2017 8:42 PM, Philip Seeley wrote: Hi Bill, This is probably because the default RHEL6 configuration does not include any categories in the user_u SELinux user's range: # semanage user -l Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles guest_u user s0 s0 guest_r root user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r staff_u user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r sysadm_u user s0 s0-s0:c0.c1023 sysadm_r system_u user s0 s0-s0:c0.c1023 system_r unconfined_r unconfined_u user s0 s0-s0:c0.c1023 system_r unconfined_r user_u user s0 s0 user_r You probably have to extend the user definition to include the categories you're using. As an example, this gives all categories: # semanage user -m -r s0:c0.c1023 user_u # semanage user -l Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles guest_u user s0 s0 guest_r root user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r staff_u user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r sysadm_u user s0 s0-s0:c0.c1023 sysadm_r system_u user s0 s0-s0:c0.c1023 system_r unconfined_r unconfined_u user s0 s0-s0:c0.c1023 system_r unconfined_r user_u user s0 s0:c0.c1023 user_r Hope that helps. Phil Inactive hide details for Bill Durant ---24/05/2017 12:34:53---Hello Phil: Thank you for the suggestion. I have tried the stepBill Durant ---24/05/2017 12:34:53---Hello Phil: Thank you for the suggestion. I have tried the steps from the URL that From: Bill Durant _<littus@icloud.com>_ <mailto:littus@icloud.com> To: Philip Seeley _<pseeley@au1.ibm.com>_ <mailto:pseeley@au1.ibm.com> Cc: _littus@icloud.com_ <mailto:littus@icloud.com>, _selinux@lists.fedoraproject.org_ <mailto:selinux@lists.fedoraproject.org> Date: 24/05/2017 12:34 Subject: Re: Controlling execution of Java JAR files with SELinux RBAC ------------------------------------------------------------------------ Hello Phil: Thank you for the suggestion. I have tried the steps from the URL that you provided without success. I get an error when I try to assign Linux user mary to an SELinux login as follows: # cat /etc/redhat-release CentOS release 6.9 (Final) ;;; Add "s0:c0=NetworkAdministrator" and "s0:c1=Operator" to /etc/selinux/targeted/setrans.conf # cat /etc/selinux/targeted/setrans.conf # # Multi-Category Security translation table for SELinux # # Uncomment the following to disable translation libary # disable=1 # # Objects can be categorized with 0-1023 categories defined by the admin. # Objects can be in more than one category at a time. # Categories are stored in the system as c0-c1023. Users can use this # table to translate the categories into a more meaningful output. # Examples: # s0:c0=CompanyConfidential # s0:c1=PatientRecord # s0:c2=Unclassified # s0:c3=TopSecret # s0:c1,c3=CompanyConfidentialRedHat s0:c0=NetworkAdministrator s0:c1=Operator s0=SystemLow s0-s0:c0.c1023=SystemLow-SystemHigh s0:c0.c1023=SystemHigh # service mcstrans start # chcat -L s0:c0 NetworkAdministrator s0:c1 Operator s0 SystemLow s0-s0:c0.c1023 SystemLow-SystemHigh s0:c0.c1023 SystemHigh # useradd mary # passwd mary Changing password for user mary. New password: Retype new password: passwd: all authentication tokens updated successfully. # semanage login -a mary # chcat -l -- +NetworkAdministrator mary libsemanage.validate_handler: MLS range s0-s0:c0 for Unix user mary exceeds allowed range s0 for SELinux user user_u (No such file or directory). libsemanage.validate_handler: seuser mapping [mary -> (user_u, s0-s0:c0)] is invalid (No such file or directory). libsemanage.dbase_llist_iterate: could not iterate over records (No such file or directory). /usr/sbin/semanage: Could not commit semanage transaction I would appreciate any hints on how to resolve that error. Thanks! Bill On 05/23/2017 05:49 PM, Philip Seeley wrote: Hi Bill, Have you thought about using categories?_ __https://www.centos.org/docs/5/html/Deployment_Guide-en-US/sec-mcs-getstarted.html_ Cheers Phil Inactive hide details for Bill D ---24/05/2017 09:52:00---Greetings: I have been trying to figure out how to control the executBill D ---24/05/2017 09:52:00---Greetings: I have been trying to figure out how to control the execution of Java From: Bill D _<littus@icloud.com>_ <mailto:littus@icloud.com> To: _selinux@lists.fedoraproject.org_ <mailto:selinux@lists.fedoraproject.org> Cc: _littus@icloud.com_ <mailto:littus@icloud.com> Date: 24/05/2017 09:52 Subject: Controlling execution of Java JAR files with SELinux RBAC ------------------------------------------------------------------------ Greetings: I have been trying to figure out how to control the execution of Java JAR files with SELinux RBAC. I have two Linux users named joe and mary and two Java JAR files named jack.jar and mary.jar. Here is how jack executes jack.jar: java -jar jack.jar Here is how mary executes mary.jar: java -jar mary.jar I would like SELinux RBAC to prevent jack from executing mary.jar and prevent mary from executing jack.jar. How to configure SELinux RBAC to make that happen? I have tried various approaches without success. I have also tried the steps in _http://forums.fedoraforum.org/archive/index.php/t-222938.html_ without success. I would greatly appreciate any hints. Regards, Bill _______________________________________________ selinux mailing list -- _selinux@lists.fedoraproject.org_ <mailto:selinux@lists.fedoraproject.org> To unsubscribe send an email to _selinux-leave@lists.fedoraproject.org_ <mailto:selinux-leave@lists.fedoraproject.org> _______________________________________________ selinux mailing list -- _selinux@lists.fedoraproject.org_ <mailto:selinux@lists.fedoraproject.org> To unsubscribe send an email to _selinux-leave@lists.fedoraproject.org_ <mailto:selinux-leave@lists.fedoraproject.org>
Hi Bill,
Good news.
The "+" will add to any existing categories already given to the login, which in your initial case was SystemLow-SystemHigh, so had no effect. If it was initially SystemLow then it would have done the desired thing.
For platforms newer than CentOS6/RHEL6, then you can make the user_t domain MCS constrained with:
[root@laptop ~]# cat mcsconstrainedusers.te policy_module(mcsconstrainedusers, 1.0.0)
gen_require(` type user_t; ')
mcs_constrained(user_t);
Compiling this under Fedora 25 gave a bunch of warnings, but the module installed OK and gave the desired effect. I've not had time to look into the warnings, sorry.
[root@laptop ~]# make -f /usr/share/selinux/devel/Makefile /usr/share/selinux/devel/include/contrib/container.if:14: Error: duplicate definition of container_runtime_domtrans(). Original definition on 14. /usr/share/selinux/devel/include/contrib/container.if:40: Error: duplicate definition of container_runtime_run(). Original definition on 40. <snip>... /usr/share/selinux/devel/include/contrib/container.if:589: Error: duplicate definition of docker_spc_stream_connect(). Original definition on 589. /usr/share/selinux/devel/include/contrib/container.if:603: Error: duplicate definition of container_spc_read_state(). Original definition on 603. Compiling targeted mcsconstrainedusers module /usr/bin/checkmodule: loading policy configuration from tmp/mcsconstrainedusers.tmp /usr/bin/checkmodule: policy configuration loaded /usr/bin/checkmodule: writing binary representation (version 17) to tmp/mcsconstrainedusers.mod Creating targeted mcsconstrainedusers.pp policy package rm tmp/mcsconstrainedusers.mod tmp/mcsconstrainedusers.mod.fc
[root@laptop ~]# semodule -i mcsconstrainedusers.pp [root@laptop ~]#
Cheers
Phil
From: Bill Durant littus@icloud.com To: Philip Seeley pseeley@au1.ibm.com Cc: littus@icloud.com, selinux@lists.fedoraproject.org Date: 30/05/2017 07:01 Subject: Re: Controlling execution of Java JAR files with SELinux RBAC
Hello Phil:
Setting the categories instead of adding them with the "+" worked!
So it sounds like the chcat "+" option is not working as expected on CentOS 6.9. Do you concur?
Thank you for your help Phil.
The following series of steps show that it now works as expected:
# uname -a
Linux es300h 2.6.32-696.1.1.el6.x86_64 #1 SMP Tue Apr 11 17:13:24 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
# cat /etc/redhat-release CentOS release 6.9 (Final)
# semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user s0 s0 git_shell_r green_u user s0 s0 green_r guest_u user s0 s0 guest_r red_u user s0 s0 red_r root user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r staff_u user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r sysadm_u user s0 s0-s0:c0.c1023 sysadm_r system_u user s0 s0-s0:c0.c1023 system_r unconfined_r unconfined_u user s0 s0-s0:c0.c1023 system_r unconfined_r user_u user s0 s0 user_r xguest_u user s0 s0 xguest_r
# semanage user -m -r s0-s0:c0.c1023 user_u
# semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user s0 s0 git_shell_r green_u user s0 s0 green_r guest_u user s0 s0 guest_r red_u user s0 s0 red_r root user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r staff_u user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r sysadm_u user s0 s0-s0:c0.c1023 sysadm_r system_u user s0 s0-s0:c0.c1023 system_r unconfined_r unconfined_u user s0 s0-s0:c0.c1023 system_r unconfined_r user_u user s0 s0-s0:c0.c1023 user_r xguest_u user s0 s0 xguest_r
# cat /etc/selinux/targeted/setrans.conf # # Multi-Category Security translation table for SELinux # # Uncomment the following to disable translation libary # disable=1 # # Objects can be categorized with 0-1023 categories defined by the admin. # Objects can be in more than one category at a time. # Categories are stored in the system as c0-c1023. Users can use this # table to translate the categories into a more meaningful output. # Examples: # s0:c0=CompanyConfidential # s0:c1=PatientRecord # s0:c2=Unclassified # s0:c3=TopSecret # s0:c1,c3=CompanyConfidentialRedHat s0:c0=NetworkAdministrator s0:c1=Operator s0=SystemLow s0-s0:c0.c1023=SystemLow-SystemHigh s0:c0.c1023=SystemHigh
# service mcstrans restart Stopping mcstransd: [ OK ] Starting mcstransd: [ OK ]
# chcat -L s0:c0 NetworkAdministrator s0:c1 Operator s0 SystemLow s0-s0:c0.c1023 SystemLow-SystemHigh s0:c0.c1023 SystemHigh
# useradd foo
# useradd bar
# passwd foo Changing password for user foo. New password: Retype new password: passwd: all authentication tokens updated successfully.
# passwd bar Changing password for user bar. New password: Retype new password: passwd: all authentication tokens updated successfully.
# semanage login -a foo
# semanage login -a bar
# chcat -l -- c0 foo
# chcat -l -- c1 bar
# semanage login -l
Login Name SELinux User MLS/MCS Range
__default__ unconfined_u SystemLow-SystemHigh bar user_u SystemLow-Operator foo user_u SystemLow-NetworkAdministrator root unconfined_u SystemLow-SystemHigh system_u system_u SystemLow-SystemHigh
# chcat -L -l foo bar foo: NetworkAdministrator bar: Operator
# chcat -- +NetworkAdministrator /usr/local/soup/bin/foo.jar
# ls -Z /usr/local/soup/bin/foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/foo.jar
Now as the Linux user, foo, it works as expected:
$ whoami foo
$ id -Z user_u:user_r:user_t:SystemLow-NetworkAdministrator
$ java -jar /usr/local/soup/bin/foo.jar
Hello from the foo application
Now as the Linux user, bar, it also works as expected:
$ whoami bar
$ id -Z user_u:user_r:user_t:SystemLow-Operator
$ java -jar /usr/local/soup/bin/foo.jar Error: Unable to access jarfile /usr/local/soup/bin/foo.jar
Regards,
Bill
On 05/28/2017 05:22 PM, Philip Seeley wrote:
Hi Bill,
I saw in a previous post that you were using CentOS 6.9 so this should work for you. It looks like the login configuration is not quite right as both users are showing SystemLow-SystemHigh when they logon.
Check the login config shows they only have the categories they need, i.e. jack has c0 and mary has c1.
If they're not correct try setting the categories rather than adding to them with a "+":
[root@centos6 ~]# chcat -l -- c0 jack [root@centos6 ~]# chcat -l -- c1 mary
[root@centos6 ~]# semanage login -l
Login Name SELinux User MLS/MCS Range
__default__ unconfined_u s0-s0:c0.c1023
jack user_u s0-s0:c0
mary user_u s0-s0:c1
root unconfined_u s0-s0:c0.c1023
system_u system_u s0-s0:c0.c1023
Then with:
# ll -Z /usr/local/bin/ -rw-r--r--. root root unconfined_u:object_r:bin_t:s0:c0 jack -rw-r--r--. root root unconfined_u:object_r:bin_t:s0:c1 mary [root@centos6 ~]# cat /etc/system-release CentOS release 6.9 (Final)
as jack:
[jack@centos6 ~]$ id uid=500(jack) gid=500(jack) groups=500(jack) context=user_u:user_r:user_t:s0-s0:c0 [jack@centos6 ~]$ cat /usr/local/bin/jack Hi [jack@centos6 ~]$ cat /usr/local/bin/mary cat: /usr/local/bin/mary: Permission denied
and as mary:
[mary@centos6 ~]$ id uid=501(mary) gid=501(mary) groups=501(mary) context=user_u:user_r:user_t:s0-s0:c1 [mary@centos6 ~]$ cat /usr/local/bin/jack cat: /usr/local/bin/jack: Permission denied [mary@centos6 ~]$ cat /usr/local/bin/mary Hi
Cheers
Phil
Inactive hide details for Bill D ---26/05/2017 05:19:44---Hello Phil: Thank you for the response. Your suggested fix resolved Bill D ---26/05/2017 05:19:44---Hello Phil: Thank you for the response. Your suggested fix resolved the error.
From: Bill D littus@icloud.com To: Philip Seeley pseeley@au1.ibm.com Cc: littus@icloud.com, selinux@lists.fedoraproject.org Date: 26/05/2017 05:19 Subject: Re: Controlling execution of Java JAR files with SELinux RBAC
Hello Phil:
Thank you for the response. Your suggested fix resolved the error.
However, I am unable to get the desired effect.
I am not able to prevent a Linux user from running/accessing a Java JAR file using SELinux categories.
I would appreciate any other hints to make this work.
Following are the details of what I did:
# semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemLow user_r xguest_u user SystemLow SystemLow xguest_r
# semanage user -m -r s0-s0:c0.c1023 user_u
# semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemLow-SystemHigh user_r xguest_u user SystemLow SystemLow xguest_r
# cat setrans.conf
# # Multi-Category Security translation table for SELinux # # Uncomment the following to disable translation libary # disable=1 # # Objects can be categorized with 0-1023 categories defined by the admin. # Objects can be in more than one category at a time. # Categories are stored in the system as c0-c1023. Users can use this # table to translate the categories into a more meaningful output. # Examples: # s0:c0=CompanyConfidential # s0:c1=PatientRecord # s0:c2=Unclassified # s0:c3=TopSecret # s0:c1,c3=CompanyConfidentialRedHat s0:c0=NetworkAdministrator s0:c1=Operator s0=SystemLow s0-s0:c0.c1023=SystemLow-SystemHigh s0:c0.c1023=SystemHigh
# service mcstrans restart Stopping mcstransd: [ OK ] Starting mcstransd: [ OK ]
# chcat -L s0:c0 NetworkAdministrator s0:c1 Operator s0 SystemLow s0-s0:c0.c1023 SystemLow-SystemHigh s0:c0.c1023 SystemHigh
# useradd foo
# useradd bar
# passwd foo Changing password for user foo. New password: Retype new password: passwd: all authentication tokens updated successfully.
# passwd bar Changing password for user bar. New password: Retype new password: passwd: all authentication tokens updated successfully.
# semanage login -a foo
# semanage login -a bar
# chcat -l -- +NetworkAdministrator foo
# chcat -l -- +Operator bar
# chcat -L -l bar foo bar: s0:c0.c1023,c1 <===== why is it not just s0:c1? foo: s0:c0.c1023,c0 <===== why is it not just just s0:c0?
# chcat -- +NetworkAdministrator /usr/local/soup/bin/Foo.jar
# ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar
Now Login as the 'foo' Linux user and notice that it can run Foo.jar as expected
$ whoami foo
$ id -Z user_u:user_r:user_t:SystemLow-SystemHigh
$ ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar
$ java -jar /usr/local/soup/bin/Foo.jar Hello Foo
Now login as the 'bar' Linux user and notice that it can also run Foo.jar which is NOT expected
$ whoami bar
$ id -Z user_u:user_r:user_t:SystemLow-SystemHigh
$ ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar
$ java -jar /usr/local/soup/bin/Foo.jar Hello Foo
Why is Linux user 'bar' able to run/access Foo.jar when its category doesn't match Foo.jar's category?
Following is how to create the Foo.jar file:
$ cat Foo.java public class Foo { public static void main(String[] args) { System.out.println("Hello Foo"); } }
$ cat manifest.txt Main-Class:
$ javac Foo.java
$ jar cvfe Foo.jar Foo Foo.class added manifest adding: Foo.class(in = 409) (out= 282)(deflated 31%)
Best Regards,
Bill
On 05/24/2017 04:39 PM, Philip Seeley wrote: Hi Bill,
I think this was my mistake in transcribing. The user_u line after the "semanage user -m" command should be:
user_u user SystemLow SystemLow-SystemHigh user_r
So the command should have been:
semanage user -m -r s0-s0:c0.c1023 user_u
Or even:
semanage user -m -r SystemLow-SystemHigh user_u
Appologies for that.
Phil
Inactive hide details for Bill D ---25/05/2017 02:28:19---Hello Phil, I have tried your suggestion of extending the user_u defiBill D ---25/05/2017 02:28:19---Hello Phil, I have tried your suggestion of extending the user_u definition without
From: Bill D littus@icloud.com To: Philip Seeley pseeley@au1.ibm.com Cc: littus@icloud.com, selinux@lists.fedoraproject.org Date: 25/05/2017 02:28 Subject: Re: Controlling execution of Java JAR files with SELinux RBAC
Hello Phil,
I have tried your suggestion of extending the user_u definition without success:
# semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemLow user_r xguest_u user SystemLow SystemLow xguest_r
# semanage user -m -r s0:c0.c1023 user_u
# semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemHigh user_r xguest_u user SystemLow SystemLow xguest_r
# useradd kate
# passwd kate Changing password for user kate. New password: Retype new password: passwd: all authentication tokens updated successfully.
# semanage login -a kate libsemanage.validate_handler: MLS range s0 for Unix user regularuser exceeds allowed range s0:c0.c1023 for SELinux user user_u (No such file or directory). libsemanage.validate_handler: seuser mapping [regularuser -> (user_u, s0)] is invalid (No such file or directory). libsemanage.dbase_llist_iterate: could not iterate over records (No such file or directory). /usr/sbin/semanage: Could not commit semanage transaction
I would greatly appreciate any other hints to make this work.
Regards,
Bill
On 5/23/2017 8:42 PM, Philip Seeley wrote:
Hi Bill,
This is probably because the default RHEL6 configuration does not include any categories in the user_u SELinux user's range:
# semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
guest_u user s0 s0 guest_r root user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r staff_u user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r sysadm_u user s0 s0-s0:c0.c1023 sysadm_r system_u user s0 s0-s0:c0.c1023 system_r unconfined_r unconfined_u user s0 s0-s0:c0.c1023 system_r unconfined_r user_u user s0 s0 user_r
You probably have to extend the user definition to include the categories you're using. As an example, this gives all categories:
# semanage user -m -r s0:c0.c1023 user_u
# semanage user -l
Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles
guest_u user s0 s0 guest_r root user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r staff_u user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r sysadm_u user s0 s0-s0:c0.c1023 sysadm_r system_u user s0 s0-s0:c0.c1023 system_r unconfined_r unconfined_u user s0 s0-s0:c0.c1023 system_r unconfined_r user_u user s0 s0:c0.c1023 user_r
Hope that helps.
Phil
Inactive hide details for Bill Durant ---24/05/2017 12:34:53---Hello Phil: Thank you for the suggestion. I have tried the stepBill Durant ---24/05/2017 12:34:53---Hello Phil: Thank you for the suggestion. I have tried the steps from the URL that
From: Bill Durant littus@icloud.com To: Philip Seeley pseeley@au1.ibm.com Cc: littus@icloud.com, selinux@lists.fedoraproject.org Date: 24/05/2017 12:34 Subject: Re: Controlling execution of Java JAR files with SELinux RBAC
Hello Phil:
Thank you for the suggestion. I have tried the steps from the URL that you provided without success.
I get an error when I try to assign Linux user mary to an SELinux login as follows:
# cat /etc/redhat-release CentOS release 6.9 (Final)
;;; Add "s0:c0=NetworkAdministrator" and "s0:c1=Operator" to /etc/selinux/targeted/setrans.conf
# cat /etc/selinux/targeted/setrans.conf
# # Multi-Category Security translation table for SELinux # # Uncomment the following to disable translation libary # disable=1 # # Objects can be categorized with 0-1023 categories defined by the admin. # Objects can be in more than one category at a time. # Categories are stored in the system as c0-c1023. Users can use this # table to translate the categories into a more meaningful output. # Examples: # s0:c0=CompanyConfidential # s0:c1=PatientRecord # s0:c2=Unclassified # s0:c3=TopSecret # s0:c1,c3=CompanyConfidentialRedHat
s0:c0=NetworkAdministrator s0:c1=Operator s0=SystemLow s0-s0:c0.c1023=SystemLow-SystemHigh
s0:c0.c1023=SystemHigh
# service mcstrans start
# chcat -L s0:c0 NetworkAdministrator s0:c1 Operator s0 SystemLow s0-s0:c0.c1023 SystemLow-SystemHigh s0:c0.c1023 SystemHigh
# useradd mary # passwd mary Changing password for user mary. New password: Retype new password: passwd: all authentication tokens updated successfully.
# semanage login -a mary
# chcat -l -- +NetworkAdministrator mary libsemanage.validate_handler: MLS range s0-s0:c0 for Unix user mary exceeds allowed range s0 for SELinux user user_u (No such file or directory). libsemanage.validate_handler: seuser mapping [mary -> (user_u, s0-s0:c0)] is invalid (No such file or directory). libsemanage.dbase_llist_iterate: could not iterate over records (No such file or directory). /usr/sbin/semanage: Could not commit semanage transaction
I would appreciate any hints on how to resolve that error.
Thanks!
Bill
On 05/23/2017 05:49 PM, Philip Seeley wrote:
Hi Bill,
Have you thought about using categories?
https://www.centos.org/docs/5/html/Deployment_Guide-en-US/sec-mcs-getstarted...
Cheers
Phil
Inactive hide details for Bill D ---24/05/2017 09:52:00---Greetings: I have been trying to figure out how to control the executBill D ---24/05/2017 09:52:00---Greetings: I have been trying to figure out how to control the execution of Java
From: Bill D littus@icloud.com To: selinux@lists.fedoraproject.org Cc: littus@icloud.com Date: 24/05/2017 09:52 Subject: Controlling execution of Java JAR files with SELinux RBAC
Greetings:
I have been trying to figure out how to control the execution of Java JAR files with SELinux RBAC.
I have two Linux users named joe and mary and two Java JAR files named jack.jar and mary.jar.
Here is how jack executes jack.jar: java -jar jack.jar
Here is how mary executes mary.jar: java -jar mary.jar
I would like SELinux RBAC to prevent jack from executing mary.jar and prevent mary from executing jack.jar.
How to configure SELinux RBAC to make that happen?
I have tried various approaches without success. I have also tried the steps in http://forums.fedoraforum.org/archive/index.php/t-222938.html
without success.
I would greatly appreciate any hints.
Regards,
Bill
_______________________________________________ selinux mailing list -- selinux@lists.fedoraproject.org To unsubscribe send an email to selinux-leave@lists.fedoraproject.org
_______________________________________________ selinux mailing list -- selinux@lists.fedoraproject.org To unsubscribe send an email to selinux-leave@lists.fedoraproject.org
selinux@lists.fedoraproject.org
-
Bill D -
Bill Durant
-
Philip Seeley -
Stephen Smalley