I tried to use setools in FedoraCore3-test3. I installed from rpm in Fedora project server. setools-1.4.1-5, setools-gui-1.4.1-5
gui tools(apol,sepcut) are very slow before window is shown. In FedoraCore2, it was slow, too.
When I used setools in FedoraCore1, setool is fast enough in the same machine.
--- Yuichi Nakamura Japan SELinux Users Group(JSELUG) http://www.selinux.gr.jp/ Hitachi Software http://www.selinux.hitachi-sk.co.jp/en The George Washington University
-----Original Message----- From: fedora-selinux-list-bounces@redhat.com [mailto:fedora-selinux-list- bounces@redhat.com] On Behalf Of Yuichi Nakamura Sent: Sunday, October 17, 2004 10:14 AM To: fedora-selinux-list@redhat.com Subject: setools in Fedora
I tried to use setools in FedoraCore3-test3. I installed from rpm in Fedora project server. setools-1.4.1-5, setools-gui-1.4.1-5
gui tools(apol,sepcut) are very slow before window is shown. In FedoraCore2, it was slow, too.
When I used setools in FedoraCore1, setool is fast enough in the same machine.
A couple of questions to help narrow things down:
* Once the tool is displayed do things seem normal? * How slow is the startup (10 secs, 30 secs, 1 minute, etc)? * Are you passing any command-line parameters? * Do you use any other TCL/TK apps and do they show similar behavior?
Karl
Karl MacMillan Tresys Technology http://www.tresys.com (410)290-1411 ext 134
Yuichi Nakamura Japan SELinux Users Group(JSELUG) http://www.selinux.gr.jp/ Hitachi Software http://www.selinux.hitachi-sk.co.jp/en The George Washington University
-- fedora-selinux-list mailing list fedora-selinux-list@redhat.com http://www.redhat.com/mailman/listinfo/fedora-selinux-list
"Karl MacMillan" kmacmillan@tresys.com wrote:
A couple of questions to help narrow things down:
- Do you use any other TCL/TK apps and do they show similar behavior?
I ran sample /usr/share/tcl8.4/BWidget-1.4.1/demo. It is slow. It will be problem of tcl/tk or BWidgets.
- Once the tool is displayed do things seem normal?
Yes. First time tabs are displayed, it is slow, but after clicking all tabs and displayed all tabs, it seems normal.
- How slow is the startup (10 secs, 30 secs, 1 minute, etc)?
In my environment(celeron1.7Ghz, memory 256Mb, Gnome), it takes about 10-20 secs for one tab to be displayed.
- Are you passing any command-line parameters?
No command parameters.
--- Yuichi Nakamura Japan SELinux Users Group(JSELUG) http://www.selinux.gr.jp/ Hitachi Software http://www.selinux.hitachi-sk.co.jp/en The George Washington University
-----Original Message----- From: fedora-selinux-list-bounces@redhat.com [mailto:fedora-selinux-list- bounces@redhat.com] On Behalf Of Yuichi Nakamura Sent: Monday, October 18, 2004 2:11 PM To: Fedora SELinux support list for users & developers. Subject: Re: setools in Fedora
"Karl MacMillan" kmacmillan@tresys.com wrote:
A couple of questions to help narrow things down:
- Do you use any other TCL/TK apps and do they show similar behavior?
I ran sample /usr/share/tcl8.4/BWidget-1.4.1/demo. It is slow. It will be problem of tcl/tk or BWidgets.
One solution may be to upgrade to a new version of BWidgets and see if that helps. There shouldn't be any problem with the newer versions, we simply distribute 1.4 because it is compatible with the widest range of Tcl/Tk versions.
Karl
Karl MacMillan Tresys Technology http://www.tresys.com (410)290-1411 ext 134
- Once the tool is displayed do things seem normal?
Yes. First time tabs are displayed, it is slow, but after clicking all tabs and displayed all tabs, it seems normal.
- How slow is the startup (10 secs, 30 secs, 1 minute, etc)?
In my environment(celeron1.7Ghz, memory 256Mb, Gnome), it takes about 10-20 secs for one tab to be displayed.
- Are you passing any command-line parameters?
No command parameters.
Yuichi Nakamura Japan SELinux Users Group(JSELUG) http://www.selinux.gr.jp/ Hitachi Software http://www.selinux.hitachi-sk.co.jp/en The George Washington University
-- fedora-selinux-list mailing list fedora-selinux-list@redhat.com http://www.redhat.com/mailman/listinfo/fedora-selinux-list
"Karl MacMillan" kmacmillan@tresys.com wrote:
One solution may be to upgrade to a new version of BWidgets and see if that helps. There shouldn't be any problem with the newer versions, we simply distribute 1.4 because it is compatible with the widest range of Tcl/Tk versions.
I tried BWidget1.7.0, but it is slow too(Samples in Bwidget and setools). Tcl/Tk application not using BWidget seems not slow.
Does anyone experienced the same trouble ?
--- Yuichi Nakamura Japan SELinux Users Group(JSELUG) http://www.selinux.gr.jp/ Hitachi Software http://www.selinux.hitachi-sk.co.jp/en The George Washington University
We can't reproduce this problem, unfortunately. We will keep a bug open for this in case something comes up in the future. You might try contacting the BWidget developers.
Karl
Karl MacMillan Tresys Technology http://www.tresys.com (410)290-1411 ext 134
-----Original Message----- From: Yuichi Nakamura [mailto:himainu-ynakam@miomio.jp] Sent: Tuesday, October 19, 2004 4:18 PM To: Fedora SELinux support list for users & developers. Cc: 'Selinux-Dev'; himainu-ynakam@miomio.jp Subject: Re: setools in Fedora
"Karl MacMillan" kmacmillan@tresys.com wrote:
One solution may be to upgrade to a new version of BWidgets and see if
that
helps. There shouldn't be any problem with the newer versions, we simply distribute 1.4 because it is compatible with the widest range of Tcl/Tk versions.
I tried BWidget1.7.0, but it is slow too(Samples in Bwidget and setools). Tcl/Tk application not using BWidget seems not slow.
Does anyone experienced the same trouble ?
Yuichi Nakamura Japan SELinux Users Group(JSELUG) http://www.selinux.gr.jp/ Hitachi Software http://www.selinux.hitachi-sk.co.jp/en The George Washington University
"Karl MacMillan" wrote:
We can't reproduce this problem, unfortunately. We will keep a bug open for this in case something comes up in the future. You might try contacting the BWidget developers.
One of Japanese users reported same problem, but he could resolve it. As he say, it seems language dependent problem.
When we install Fedora as Japanese, LANG is ja_JP.UTF-8. When LANG is ja_JP.UTF-8 Bwidget is very slow in some environment.
But, after "unset LANG" Bwidget and setools works normally! When "LANG = en_US.UTF-8" Bwidget works fine as well.
--- Yuichi Nakamura Japan SELinux Users Group(JSELUG) http://www.selinux.gr.jp/ Hitachi Software http://www.selinux.hitachi-sk.co.jp/en The George Washington University
selinux@lists.fedoraproject.org
-
Karl MacMillan -
Yuichi Nakamura