test September 2005

test@lists.fedoraproject.org

105 participants
155 discussions

system-config-mouse
by Michal Jaegermann 21 Sep '05

21 Sep '05

Fairly recently system-config-mouse vanished from development packages. Was this a deliberate decision and if yes then what I am supposed to use now to configure mouse properties? It does not look that there something which takes over these functions. Did I miss it? Michal

4 6

gcc-4.0.1-14 problem ?
by Ernest L. Williams Jr. 20 Sep '05

20 Sep '05

Hi, The following code fragment is now causing problems under gcc 4.0.1 Basically, I have "gcc version 4.0.1 20050919 (Red Hat 4.0.1-14)" from rawhide. Everything is perfect under "gcc version 3.4.3" Any recommended work-arounds? ================= code fragment====================================== #ifndef __LOC_PV_FACTORY_H__ #define __LOC_PV_FACTORY_H__ line 10 --> #include "pv_factory.h" line 11 --> line 12 --> class LOC_PV_Factory : public PV_Factory line 13 --> { line 14 --> public: line 15 --> LOC_PV_Factory(); line 16 --> ~LOC_PV_Factory(); line 17 --> ProcessVariable *create(const char *PV_name); line 18 --> private: line 19 --> friend class LOC_ProcessVariable; line 20 --> static void forget(LOC_ProcessVariable *pv); line 21 --> }; ===================================================================== Here is the error and it only happens under gcc 4.0.1: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -I/usr/X11R6/include/X11 ../loc_pv_factory.cc ../loc_pv_factory.h:20: error: ‘LOC_ProcessVariable’ has not been declared ../loc_pv_factory.cc:118: error: prototype for ‘void LOC_PV_Factory::forget(LOC_ProcessVariable*)’ does not match any in class ‘LOC_PV_Factory’ ../loc_pv_factory.h:20: error: candidate is: static void LOC_PV_Factory::forget(int*) ../loc_pv_factory.cc: In destructor ‘virtual LOC_ProcessVariable::~LOC_ProcessVariable()’: ../loc_pv_factory.cc:257: error: cannot call member function ‘void LOC_PV_Factory::forget(LOC_ProcessVariable*)’ without object make[1]: *** [loc_pv_factory.o] Error 1 make[1]: Leaving directory `/ade/epics/supTop/extensions/src/edm/lib/O.linux-x86' make: *** [install.linux-x86] Error 2 [williams@matrix lib]$ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Thanks, Ernesto

2 3

anacron daily - prelink line 47 error
by Jim Cornette 20 Sep '05

20 Sep '05

Has anyone seen this entry in system mail? I have prelink-0.3.6-1 and anacron-2.3-34 installed. Subject: Anacron job 'cron.daily' /etc/cron.daily/prelink: /etc/cron.daily/prelink: line 47: 28738 Aborted +/usr/sbin/prelink -av $PRELINK_OPTS >>/var/log/prelink.log 2>&1 Jim -- QOTD: If it's too loud, you're too old.

2 2

rpmnew & rpmsave
by Justin Conover 20 Sep '05

20 Sep '05

How do you implement this in a spec file? If file is here and there are changes, either replace it and create filename.save, or keep the old and create filename.rpmnew Thank you,

4 3

Fedora Core 4 Test Update: xmltex-20020625-5.1
by Tim Waugh 20 Sep '05

20 Sep '05

--------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2005-899 2005-09-20 --------------------------------------------------------------------- Product : Fedora Core 4 Name : xmltex Version : 20020625 Release : 5.1 Summary : Namespace-aware XML parser written in TeX. Description : Namespace-aware XML parser written in TeX. --------------------------------------------------------------------- Update Information: A problem with building the TeX format file has been corrected. --------------------------------------------------------------------- * Tue Sep 20 2005 Tim Waugh <twaugh(a)redhat.com> 20020625-5.1 - Build fmt file using &latex not &hugelatex (bug #168728). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/4/ 54443d3c78e1608c796e7ccf013331a8 SRPMS/xmltex-20020625-5.1.src.rpm a6b8c827b7c41f5572afe79bed23b213 x86_64/xmltex-20020625-5.1.noarch.rpm a6b8c827b7c41f5572afe79bed23b213 i386/xmltex-20020625-5.1.noarch.rpm This update can also be installed with the Update Agent; you can launch the Update Agent with the 'up2date' command. You may need to edit your up2date channels configuration. Within /etc/sysconfig/rhn/sources enable the following line: yum updates-testing http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/4/$… ---------------------------------------------------------------------

1 0

Fedora Core 4 Test Update: hplip-0.9.5-1.1
by Tim Waugh 20 Sep '05

20 Sep '05

--------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2005-635 2005-09-20 --------------------------------------------------------------------- Product : Fedora Core 4 Name : hplip Version : 0.9.5 Release : 1.1 Summary : HP Linux Imaging and Printing Project Description : The Hewlett-Packard Linux Imaging and Printing Project provides drivers for HP printers and multi-function peripherals. --------------------------------------------------------------------- Update Information: Test package of the Hewlett-Packard Linux Imaging Project. --------------------------------------------------------------------- * Mon Sep 19 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.5-1.1 - Build for Fedora Core 4. - Fix compile errors. - 0.9.5. - No longer need condrestart patch. * Tue Jul 26 2005 Tim Waugh <twaugh(a)redhat.com> - Fix condrestart in the initscript. * Mon Jul 25 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.4-1.1 - Build for Fedora Core 4. - Use 'condrestart' not 'restart' in %post scriptlet. * Fri Jul 22 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.4-1 - forward-decl patch not needed. - 0.9.4. * Fri Jul 1 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.3-8 - Removed Obsoletes: hpoj tags (bug #162222). * Thu Jun 30 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.3-7 - Rebuild to get Python modules precompiled. * Wed Jun 22 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.3-6 - For libsane-hpaio ExcludeArch: s390 s390x, because it requires sane-backends. * Wed Jun 15 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.3-5 - Use static IP ports (for SELinux policy). * Tue Jun 14 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.3-4 - Conflicts: hpijs from before this package provided it. - Conflicts: system-config-printer < 0.6.132 (i.e. before HPLIP support was added) * Thu Jun 9 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.3-3 - Added Obsoletes: for xojpanel and hpoj-devel (but we don't actually package devel files yet). * Thu Jun 9 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.3-2 - Add 'hpaio' to SANE config file, not 'hpoj' (bug #159954). * Thu Jun 9 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.3-1 - Use /usr/share/applications for putting desktop files in (bug #159932). - Requires PyQt (bug #159932). * Tue Jun 7 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.3-0.1 - Initial package, based on Mandriva spec file. --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/4/ c2362084e12eeae33a551f7fbd041707 SRPMS/hplip-0.9.5-1.1.src.rpm f6286a3cbe31785181c25319415e2004 ppc/hplip-0.9.5-1.1.ppc.rpm 89d489c85267ac1a6feec1502874c7a4 ppc/hpijs-0.9.5-1.1.ppc.rpm 44134e5d4664687b7f6f17a4fda946be ppc/libsane-hpaio-0.9.5-1.1.ppc.rpm 37129d21ef8e201b15baa19f08fedd90 ppc/debug/hplip-debuginfo-0.9.5-1.1.ppc.rpm b285beb4af83ce2ed3bd3240c4d82697 x86_64/hplip-0.9.5-1.1.x86_64.rpm 5a27edc985a7a386d5b5d480ced8daa9 x86_64/hpijs-0.9.5-1.1.x86_64.rpm 33073aa6839eeb7e111519864e311b10 x86_64/libsane-hpaio-0.9.5-1.1.x86_64.rpm a900f39b59679b50b9b560134b66648d x86_64/debug/hplip-debuginfo-0.9.5-1.1.x86_64.rpm ccebf0c939f0dcf3c0ee7d05c8a8d0b0 i386/hplip-0.9.5-1.1.i386.rpm 43f8d417760216aa7989a0b60242f6f5 i386/hpijs-0.9.5-1.1.i386.rpm 4a6c3ca2e320ef46b300cfb760eddbb4 i386/libsane-hpaio-0.9.5-1.1.i386.rpm 82160aeeadfabb98ea9e4dab3b934023 i386/debug/hplip-debuginfo-0.9.5-1.1.i386.rpm This update can also be installed with the Update Agent; you can launch the Update Agent with the 'up2date' command. You may need to edit your up2date channels configuration. Within /etc/sysconfig/rhn/sources enable the following line: yum updates-testing http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/4/$… ---------------------------------------------------------------------

1 0

usb hard drive: messages when pluggin in
by Tom London 20 Sep '05

20 Sep '05

Running today's rawhide: When I plug in a USB hardrive, I get the following messages. The drive has 3 partitions: first is NTFS, second is EXT3, third is LVM (ext3 inside). ext3 partition seems properly mounted on /media/usbdisk1. tom Sep 20 08:34:07 localhost kernel: usb 1-1: new high speed USB device using ehci_hcd and address 7 Sep 20 08:34:07 localhost kernel: SCSI subsystem initialized Sep 20 08:34:07 localhost kernel: Initializing USB Mass Storage driver... Sep 20 08:34:07 localhost kernel: scsi0 : SCSI emulation for USB Mass Storage devices Sep 20 08:34:07 localhost kernel: usbcore: registered new driver usb-storage Sep 20 08:34:07 localhost kernel: USB Mass Storage support registered. Sep 20 08:34:12 localhost kernel: Vendor: TOSHIBA Model: MK8026GAX Rev: 0811 Sep 20 08:34:12 localhost kernel: Type: Direct-Access ANSI SCSI revision: 00 Sep 20 08:34:12 localhost kernel: SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) Sep 20 08:34:12 localhost kernel: sda: assuming drive cache: write through Sep 20 08:34:12 localhost kernel: SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) Sep 20 08:34:12 localhost kernel: sda: assuming drive cache: write through Sep 20 08:34:12 localhost kernel: sda: sda1 sda2 sda3 Sep 20 08:34:12 localhost kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Sep 20 08:34:12 localhost udev[3771]: import_file_into_env: can't open '/sbin/path_id /block/sda' Sep 20 08:34:13 localhost udev[3783]: import_file_into_env: can't open '/sbin/vol_id --export /dev/.tmp-8-1' Sep 20 08:34:13 localhost udev[3784]: import_file_into_env: can't open '/sbin/vol_id --export /dev/.tmp-8-2' Sep 20 08:34:13 localhost udev[3785]: import_file_into_env: can't open '/sbin/vol_id --export /dev/.tmp-8-3' Sep 20 08:34:13 localhost fstab-sync[3806]: added mount point /media/usbdisk for /dev/sda1 Sep 20 08:34:13 localhost fstab-sync[3813]: added mount point /media/usbdisk1 for /dev/sda2 Sep 20 08:34:13 localhost kernel: kjournald starting. Commit interval 5 secondsSep 20 08:34:13 localhost kernel: EXT3 FS on sda2, internal journal Sep 20 08:34:13 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode. Sep 20 08:34:13 localhost udevd[692]: get_netlink_msg: no ACTION in payload found, skip event 'mount' Sep 20 08:34:13 localhost kernel: SELinux: initialized (dev sda2, type ext3), uses xattr -- Tom London

1 0

rawhide report: 20050920 changes
by Build System 20 Sep '05

20 Sep '05

New package libiec61883 Streaming library for IEEE1394 Updated Packages: anaconda-10.3.0.23-1 -------------------- * Mon Sep 19 2005 Jeremy Katz <katzj(a)redhat.com> - 10.3.0.23-1 - fix a silly typo that would cause tracebacks - Look for help in /tmp/updates too (#168155) - Add skge driver (#168590) - Some fixes to hopefully get x86_64 trees working bogl-0:0.1.18-10 ---------------- * Tue Sep 20 2005 Miloslav Trmac <mitr(a)redhat.com> - 0:0.1.18-10 - Simplify overzealous bogl-0.1.18-1.1.sigchld.patch * Tue Sep 20 2005 Miloslav Trmac <mitr(a)redhat.com> - 0:0.1.18-9 - Update to bogl-0.1.18-1.1 - Don't ship unused ucs fonts in the SRPM - Remove obsolete URL: (#168673) doxygen-1:1.4.4-2 ----------------- * Mon Sep 19 2005 Than Ngo <than(a)redhat.com> 1:1.4.4-2 - move doxywizard man page to subpackge doxywizard file-4.15-3 ----------- * Mon Sep 19 2005 Radek Vokal <rvokal(a)redhat.com> - 4.15-3 - small fix in previously added patch, now it works for multiple params * Mon Sep 19 2005 Radek Vokal <rvokal(a)redhat.com> - 4.15-2 - print xxx-style only once (#168617) * Tue Aug 09 2005 Radek Vokal <rvokal(a)redhat.com> - 4.15-1 - upgrade to upstream gcc-4.0.1-14 ------------ * Mon Sep 19 2005 Jakub Jelinek <jakub(a)redhat.com> 4.0.1-14 - update from CVS - PRs c++/16171, c++/21135, c++/21514, c++/23139, c++/23624, c++/23691, c++/23789, c++/23839, c++/23841, c++/23842, c++/23896, c++/23914, c++/9782, debug/20998, debug/23190, debug/23806, fortran/16511, fortran/17917, fortran/18870, fortran/18878, fortran/19358, fortran/20848, fortran/22304, fortran/22502, fortran/23270, fortran/23765, libfortran/19872, libfortran/23262, libfortran/23419, libfortran/23784, libgcj/22211, libgcj/23549, libgcj/23662, libgcj/23739, libstdc++/23358, libstdc++/23417, target/23747, target/23774, tree-optimization/22348 - fix libstdc++ ostream oct and hex formatting logic (Paolo Carlini, Janis Johnson, #168205, PR libstdc++/23871) - fix fortran ENTRY handling when ENTRY symbol is passed to a function (PR fortran/23663) - make sure dominance info is computed in stdarg pass (PR tree-optimization/23818) - workaround for stack smashing in Java's fdlibm (Tom Tromey, #166657, PR classpath/23863) hplip-0.9.5-2 ------------- * Mon Sep 19 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.5-2 - 0.9.5. - No longer need condrestart patch. - Fix compile errors. kernel-2.6.13-1.1561_FC5 ------------------------ kudzu-1.2.7-1 ------------- * Mon Sep 19 2005 Bill Nottingham <notting(a)redhat.com> 1.2.7-1 - fix fbProbe to work with X drivers, not card entries - fix crash in matchNetDevices (#168689) libidn-0.5.19-1 --------------- * Mon Sep 19 2005 Joe Orton <jorton(a)redhat.com> 0.5.19-1 - update to 0.5.19 libsetrans-0.1.6-1 ------------------ * Mon Sep 19 2005 Dan Walsh <dwalsh(a)redhat.com> 0.1.6-1 - Fix memory problem logwatch-6.1.2-4 ---------------- * Mon Sep 19 2005 Ivana Varekova <varekova(a)redhat.com> 6.1.2-4 - fixed secure script (part of bug 141116, added a few unknown logs) - bug 168469 - fixed up2date script lsof-4.76-1 ----------- * Mon Sep 19 2005 Karel Zak <kzak(a)redhat.com> 4.76-1 - new upstream version neon-0.24.7-7 ------------- * Mon Sep 19 2005 Joe Orton <jorton(a)redhat.com> 0.24.7-7 - drop static libs, doc/html from devel docdir selinux-policy-strict-1.27.1-3 ------------------------------ * Mon Sep 19 2005 Dan Walsh <dwalsh(a)redhat.com> 1.27.1-3 - Add yppasswdd policy - Change ftpd_anon_t to public_content_t selinux-policy-targeted-1.27.1-3 -------------------------------- * Mon Sep 19 2005 Dan Walsh <dwalsh(a)redhat.com> 1.27.1-3 - Add yppasswdd policy - Change ftpd_anon_t to public_content_t sendmail-8.13.5-1 ----------------- * Mon Sep 19 2005 Thomas Woerner <twoerner(a)redhat.com> 8.13.5-1 - new version 8.13.5 - fixed email address in changelog * Fri May 06 2005 Thomas Woerner <twoerner(a)redhat.com> 8.13.4-2 - using new certificates directory /etc/pki/tls/certs * Wed Apr 27 2005 Thomas Woerner <twoerrner(a)redhat.com> 8.13.4-1.1 - added configuration example for Cyrus-IMAPd to sendmail.mc (#142001) Thanks to Alexander Dalloz sudo-1.6.8p9-4 -------------- * Mon Sep 19 2005 Karel Zak <kzak(a)redhat.com> 1.6.8p9-4 - fix debuginfo * Mon Sep 19 2005 Karel Zak <kzak(a)redhat.com> 1.6.8p9-3 - fix #162623 - sesh hangs when child suspends * Mon Aug 01 2005 Dan Walsh <dwalsh(a)redhat.com> 1.6.8p9-2 - Add back in interfaces call, SELinux has been fixed to work around xchat-1:2.4.5-1 --------------- * Mon Sep 19 2005 Christopher Aillon <caillon(a)redhat.com> 1:2.4.5-1 - X-Chat 2.4.5 Broken deps for ia64 ---------------------------------------------------------- libsetrans - 0.1.6-1.ia64 requires libc.so.6(GLIBC_2.1.3) libsetrans - 0.1.6-1.ia64 requires libc.so.6 libsetrans - 0.1.6-1.ia64 requires libselinux.so.1 libsetrans - 0.1.6-1.ia64 requires libdl.so.2 libsetrans - 0.1.6-1.ia64 requires libc.so.6(GLIBC_2.3) libsetrans - 0.1.6-1.ia64 requires libc.so.6(GLIBC_2.1) libsetrans - 0.1.6-1.ia64 requires libc.so.6(GLIBC_2.0) Broken deps for ppc64 ---------------------------------------------------------- libsetrans - 0.1.6-1.ppc64 requires libc.so.6(GLIBC_2.1.3) libsetrans - 0.1.6-1.ppc64 requires libc.so.6 libsetrans - 0.1.6-1.ppc64 requires libselinux.so.1 libsetrans - 0.1.6-1.ppc64 requires libdl.so.2 libsetrans - 0.1.6-1.ppc64 requires libc.so.6(GLIBC_2.3) libsetrans - 0.1.6-1.ppc64 requires libc.so.6(GLIBC_2.1) libsetrans - 0.1.6-1.ppc64 requires libc.so.6(GLIBC_2.0)

1 0

grub can't access system
by korgull 19 Sep '05

19 Sep '05

Hi, I'm having one hell of a problem with my system after I tired to upgrade. Finally I reinstalled the system and moved my root partition to another partition in order to save the data on the old partition (I didn't reformat this partition during the reinstall, all other partions I reformated). Now grub boots with only a lot of "GRUB" on my screen and I can't access the installed FC4 system. My main harddisk is at /dev/sda and the current boot partition is /dev/sda5 (which is in an extended partition). My old boot partition was /dev/sda2 which for some reason is still found by the rescue disk as a valid boot partition, although I have cleared all directories except my data from it (how can I clear this ?) I also have an IDE drive installed as /dev/hda. I use this only for data and don't want to boot from it. I hope that's fine with grub..... I tried to reinstall grub by using grub-install, but it won't work. Is there any way to fix this issue ? Regards, Marcel

5 8

Re: yum/kudzu/kernel problem
by Rick Marshall 19 Sep '05

19 Sep '05

i'd like to stick with the new kernel - when i have a network cable i do that, but the problem comes back to the madwifi drivers :( at this stage i only have .12 modules. hmmm...... back to source code? i know this is a perma thread, but will downloading from kernel.org be good enough? thanks rick

2 1

← Newer
1
...
4
5
6
7
8
9
10
...
16
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

test September 2005