Still no go with the 3194 Kernel.
Dave, any idea when Chuck's patches will go in?
On 5/23/07, bugzilla@redhat.com bugzilla@redhat.com wrote:
Please do not reply directly to this email. All additional comments should be made in the comments box of this bug report.
Summary: ICH7 No Sound after 2944 Kernel
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=240081
cebbert@redhat.com changed:
What |Removed |Added
Status|NEW |MODIFIED------- Additional Comments From cebbert@redhat.com 2007-05-23 16:45 EST ------- I sent davej two patches that should fix this.
-- Configure bugmail: https://bugzilla.redhat.com/bugzilla/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You reported the bug, or are watching the reporter.
--- "Dr. Diesel" dr.diesel@gmail.com wrote:
Still no go with the 3194 Kernel.
Dave, any idea when Chuck's patches will go in?
On 5/23/07, bugzilla@redhat.com bugzilla@redhat.com wrote:
Please do not reply directly to this email. All
additional
comments should be made in the comments box of
this bug report.
Summary: ICH7 No Sound after 2944 Kernel
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=240081
cebbert@redhat.com changed:
What |Removed|Added
----------------------------------------------------------------------------
Status|NEW|MODIFIED
------- Additional Comments From
cebbert@redhat.com 2007-05-23 16:45 EST -------
I sent davej two patches that should fix this.
-- Configure bugmail:
https://bugzilla.redhat.com/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because:
You reported the bug, or are watching the
reporter.
-- fedora-test-list mailing list fedora-test-list@redhat.com To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-test-list
Same with my laptop! Should I send scsconfig.log as well because I did not send mine in.
Thanks,
Antonio
____________________________________________________________________________________Looking for a deal? Find great prices on flights and hotels with Yahoo! FareChase. http://farechase.yahoo.com/
On 5/27/07, sean seandarcy2@gmail.com wrote:
Chuck Ebbert wrote:
On 05/25/2007 06:09 PM, Dr. Diesel wrote:
Still no go with the 3194 Kernel.
Dave, any idea when Chuck's patches will go in?
3201
It's not in rawhide yet. Is it available somewhere?
On Sun, 2007-05-27 at 14:53 -0400, sean wrote:
Chuck Ebbert wrote:
On 05/25/2007 06:09 PM, Dr. Diesel wrote:
Still no go with the 3194 Kernel.
Dave, any idea when Chuck's patches will go in?
3201
It's not in rawhide yet. Is it available somewhere?
Thanks to the merge, the whole wide world has access to "Koji", the build system. From there you can get packages as soon as they are built.
First, go to the koji web interface: http://koji.fedoraproject.org/koji/
And hit 'search' and search for the package 'kernel' and you'll get: http://koji.fedoraproject.org/koji/packageinfo?packageID=8
From there you can download the newest kernel. Be sure to comment on the bug if that kernel fixes your problem.
-w
Will Woods wrote:
On Sun, 2007-05-27 at 14:53 -0400, sean wrote:
Chuck Ebbert wrote:
On 05/25/2007 06:09 PM, Dr. Diesel wrote:
Still no go with the 3194 Kernel.
Dave, any idea when Chuck's patches will go in?
3201
It's not in rawhide yet. Is it available somewhere?
Thanks to the merge, the whole wide world has access to "Koji", the build system. From there you can get packages as soon as they are built.
First, go to the koji web interface: http://koji.fedoraproject.org/koji/
And hit 'search' and search for the package 'kernel' and you'll get: http://koji.fedoraproject.org/koji/packageinfo?packageID=8
From there you can download the newest kernel. Be sure to comment on the bug if that kernel fixes your problem.
-w
Incredible.
Thanks for the lead.
sean
Will Woods wrote:
Thanks to the merge, the whole wide world has access to "Koji", the build system. From there you can get packages as soon as they are built.
First, go to the koji web interface: http://koji.fedoraproject.org/koji/
And hit 'search' and search for the package 'kernel' and you'll get: http://koji.fedoraproject.org/koji/packageinfo?packageID=8
From there you can download the newest kernel. Be sure to comment on the bug if that kernel fixes your problem.
Heh! Tried 3201 out and it broke my suspend (restarts X coming out of suspend)...
Tested 3207.i686 based on a couple fixes Dave made:
* Thu May 24 2007 Dave Jones davej@redhat.com - [ALSA] hda-intel - Probe additional slots only - [ALSA] hda-intel - Fix detection of audio codec
Still no sound, dmesg does show a codec error, but I'm not exactly sure what to look for! But here it the output!
Thanks Andy
[root@localhost ~]# dmesg Linux version 2.6.21-1.3207.fc7 (kojibuilder@xenbuilder3.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Mon May 28 02:33:25 EDT 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000003f580000 end: 000000003f680000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000003f680000 size: 0000000000080000 end: 000000003f700000 type: 4 copy_e820_map() start: 000000003f700000 size: 0000000000900000 end: 0000000040000000 type: 2 copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2 copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2 copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2 copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2 copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2 copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f680000 (usable) BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 118MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f7670 Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 259712) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 259712 early_node_map[1] active PFN ranges 0: 0 -> 259712 On node 0 totalpages: 259712 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 237 pages used for memmap HighMem zone: 30099 pages, LIFO batch:7 DMI present. Using APIC driver default ACPI: RSDP 000F75E0, 0014 (r0 TOSCPL) ACPI: RSDT 3F6888D5, 0054 (r1 TOSCPL TOSCPL00 6040000 LTP 0) ACPI: FACP 3F690C78, 0074 (r1 TOSCPL CALISTGA 6040000 LOHR 5A) ACPI: DSDT 3F68A640, 6638 (r1 TOSCPL CALISTGA 6040000 INTL 20060608) ACPI: FACS 3F691FC0, 0040 ACPI: SLIC 3F690CEC, 0176 (r1 TOSCPL TOSCPL00 6040000 LOHR 0) ACPI: APIC 3F690E62, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A) ACPI: HPET 3F690ECA, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A) ACPI: MCFG 3F690F02, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A) ACPI: BOOT 3F690FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: APIC 3F690F70, 0068 (r1 PTLTD APIC 6040000 LTP 0) ACPI: SSDT 3F689FED, 064F (r1 SataRe SataPri 1000 INTL 20050624) ACPI: SSDT 3F68995B, 0692 (r1 SataRe SataSec 1000 INTL 20050624) ACPI: SSDT 3F688EB5, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) ACPI: SSDT 3F688E0F, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) ACPI: SSDT 3F688929, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:14 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:14 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Built 1 zonelists. Total pages: 257683 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c077c000 soft=c075c000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1729.072 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1021432k/1038848k available (2066k kernel code, 16756k reserved, 1092k data, 240k init, 121344k highmem) virtual kernel memory layout: fixmap : 0xffc56000 - 0xfffff000 (3748 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc071b000 - 0xc0757000 ( 240 kB) .data : 0xc0604a2a - 0xc0715cb4 (1092 kB) .text : 0xc0400000 - 0xc0604a2a (2066 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Calibrating delay using timer specific routine.. 3461.10 BogoMIPS (lpj=1730551) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfe9f3ff 00000000 00000000 00002940 0000c189 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: Intel Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c077d000 soft=c075d000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3458.01 BogoMIPS (lpj=1729008) CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9f3ff 00000000 00000000 00002940 0000c189 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c Total of 2 processors activated (6919.11 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=336 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=488 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=176 bytes sizeof(task_struct)=1376 bytes migration_cost=42 Time: 10:03:29 Date: 04/28/107 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS BUG #81[00000000] found PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:01: ioport range 0xfe00-0xfe7f has been reserved pnp: 00:01: ioport range 0xfe80-0xfeff has been reserved pnp: 00:01: ioport range 0xff00-0xff7f has been reserved pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved Time: tsc clocksource has been installed. PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: d6000000-d7ffffff PREFETCH window: d0000000-d1ffffff PCI: Bridge: 0000:00:1c.1 IO window: 3000-3fff MEM window: d8000000-d9ffffff PREFETCH window: d2000000-d3ffffff PCI: Bridge: 0000:00:1c.2 IO window: 4000-4fff MEM window: da000000-dbffffff PREFETCH window: d4000000-d5ffffff PCI: Bus 7, cardbus bridge: 0000:06:04.0 IO window: 00005000-000050ff IO window: 00005400-000054ff PREFETCH window: 50000000-53ffffff MEM window: 54000000-57ffffff PCI: Bridge: 0000:00:1e.0 IO window: 5000-5fff MEM window: dc000000-dc0fffff PREFETCH window: 50000000-53ffffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 17 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs...<6>Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 it is Freeing initrd memory: 3490k freed Simple Boot Flag at 0x36 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1180346609.342:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key F23BC8AFC0DD8B38 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: SSDT 3F68965B, 0238 (r1 PmRef Cpu0Ist 3000 INTL 20050624) ACPI: SSDT 3F689114, 04C2 (r1 PmRef Cpu0Cst 3001 INTL 20050624) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: SSDT 3F689893, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) ACPI: SSDT 3F6895D6, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) Time: hpet clocksource has been installed. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected an Intel 945GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xc0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 Yenta: CardBus bridge found at 0000:06:04.0 [1179:ff00] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:06:04.0, mfunc 0x10aa1b22, devctl 0x64 Yenta: ISA IRQ mask 0x0cf8, PCI irq 17 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff cs: IO port probe 0x5000-0x5fff: clean. pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 7:669:73 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 240k freed Write protecting the kernel read-only data: 820k USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected Clocksource tsc unstable (delta = -330234838 ns) ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0 synaptics: Toshiba Satellite A135 detected, limiting rate to 40pps. ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected input: SynPS/2 Synaptics TouchPad as /class/input/input1 input: AT Translated Set 2 keyboard as /class/input/input2 usb 2-1: new low speed USB device using uhci_hcd and address 2 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdc444000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected SCSI subsystem initialized libata version 2.20 loaded. ata_piix 0000:00:1f.2: version 2.10ac1 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15 scsi0 : ata_piix ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC7DP, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 ata1.00: configured for UDMA/100 scsi1 : ata_piix usb 2-1: new low speed USB device using uhci_hcd and address 3 usb 2-1: configuration #1 chosen from 1 choice input: Microsoft Basic Optical Mouse as /class/input/input3 input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.1-1 ata2.00: ATAPI, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5 SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.90 PQ: 0 ANSI: 5 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1180346616.236:2): selinux=0 auid=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) intel_rng: FWH not detected input: PC Speaker as /class/input/input4 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 20 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:06:04.3 [104c:803c] (rev 0) ACPI: PCI Interrupt 0000:06:04.3[D] -> GSI 19 (level, low) -> IRQ 20 mmc0: SDHCI at 0xdc005800 irq 20 DMA r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:05:00.0 to 64 eth0: RTL8101e at 0xf89e6000, 00:16:d4:97:2e:e5, IRQ 18 ACPI: PCI Interrupt 0000:06:04.2[C] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:06:04.1[B] -> GSI 17 (level, low) -> IRQ 16 fw_ohci: Added fw-ohci device 0000:06:04.1, OHCI version 1.10 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS... si3054: cannot initialize. EXT MID = 0000 fw_core: created new fw device fw0 (0 config rom retries) loop: loaded (max 8 devices) floppy0: no floppy controllers found lp: driver loaded but no devices found sonypi: Sony Programmable I/O Controller Driver v1.26. ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 BUG: warning at kernel/softirq.c:144/local_bh_enable() (Not tainted) [<c042b119>] local_bh_enable+0x4f/0x92 [<c060029d>] cond_resched_softirq+0x2c/0x42 [<c059add3>] release_sock+0x4f/0x9d [<c05c66ed>] tcp_sendmsg+0x90b/0x9f9 [<c059ad96>] release_sock+0x12/0x9d [<c05c7735>] tcp_recvmsg+0x8d2/0x9de [<c05dec75>] inet_sendmsg+0x3b/0x45 [<c0598711>] sock_aio_write+0xf6/0x102 [<c04753ea>] do_sync_readv_writev+0xc1/0xfe [<c04754ee>] do_sync_write+0xc7/0x10a [<c0436e71>] autoremove_wake_function+0x0/0x35 [<c0475d47>] vfs_write+0xbc/0x154 [<c0476342>] sys_write+0x41/0x67 [<c0404f70>] syscall_call+0x7/0xb [<c0600000>] __sched_text_start+0x708/0x89e ======================= ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) No dock devices found. input: Power Button (FF) as /class/input/input5 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input6 ACPI: Lid Switch [LID0] input: Power Button (CM) as /class/input/input7 ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found set_level status: 0 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) set_level status: 0 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k IA-32 Microcode Update Driver: v1.14a tigran@aivazian.fsnet.co.uk ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8116 buckets, 64928 max) r8169: eth0: link up r8169: eth0: link up audit(1180361043.446:3): audit_pid=1982 old=0 by auid=4294967295 Bridge firewalling registered [drm] Initialized drm 1.1.0 20060810 [drm] Initialized i915 1.6.0 20060119 on minor 0 [root@localhost ~]#
On 5/27/07, Jeff Guerdat jguerdat@gmail.com wrote:
Will Woods wrote:
Thanks to the merge, the whole wide world has access to "Koji", the build system. From there you can get packages as soon as they are built.
First, go to the koji web interface: http://koji.fedoraproject.org/koji/
And hit 'search' and search for the package 'kernel' and you'll get: http://koji.fedoraproject.org/koji/packageinfo?packageID=8
From there you can download the newest kernel. Be sure to comment on the bug if that kernel fixes your problem.
Heh! Tried 3201 out and it broke my suspend (restarts X coming out of suspend)...
-- Jeff Guerdat
The two most abundant things in the universe are hydrogen and stupidity. Harlan Ellison
-- fedora-test-list mailing list fedora-test-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list
Dave, Chuck,
Can we provide any additional info? Not complaining (in fact, I don't even use sound on this machine), just hate to see the 6th most popular audio device (according to smolt) not work in FC7 final.
I'll get you in if that will help :D
Andy
On 5/28/07, Dr. Diesel dr.diesel@gmail.com wrote:
Tested 3207.i686 based on a couple fixes Dave made:
- Thu May 24 2007 Dave Jones davej@redhat.com
- [ALSA] hda-intel - Probe additional slots only
- [ALSA] hda-intel - Fix detection of audio codec
Still no sound, dmesg does show a codec error, but I'm not exactly sure what to look for! But here it the output!
Thanks Andy
[root@localhost ~]# dmesg Linux version 2.6.21-1.3207.fc7 (kojibuilder@xenbuilder3.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Mon May 28 02:33:25 EDT 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000003f580000 end: 000000003f680000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000003f680000 size: 0000000000080000 end: 000000003f700000 type: 4 copy_e820_map() start: 000000003f700000 size: 0000000000900000 end: 0000000040000000 type: 2 copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2 copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2 copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2 copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2 copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2 copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f680000 (usable) BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 118MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f7670 Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 259712) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 259712 early_node_map[1] active PFN ranges 0: 0 -> 259712 On node 0 totalpages: 259712 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 237 pages used for memmap HighMem zone: 30099 pages, LIFO batch:7 DMI present. Using APIC driver default ACPI: RSDP 000F75E0, 0014 (r0 TOSCPL) ACPI: RSDT 3F6888D5, 0054 (r1 TOSCPL TOSCPL00 6040000 LTP 0) ACPI: FACP 3F690C78, 0074 (r1 TOSCPL CALISTGA 6040000 LOHR 5A) ACPI: DSDT 3F68A640, 6638 (r1 TOSCPL CALISTGA 6040000 INTL 20060608) ACPI: FACS 3F691FC0, 0040 ACPI: SLIC 3F690CEC, 0176 (r1 TOSCPL TOSCPL00 6040000 LOHR 0) ACPI: APIC 3F690E62, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A) ACPI: HPET 3F690ECA, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A) ACPI: MCFG 3F690F02, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A) ACPI: BOOT 3F690FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: APIC 3F690F70, 0068 (r1 PTLTD APIC 6040000 LTP 0) ACPI: SSDT 3F689FED, 064F (r1 SataRe SataPri 1000 INTL 20050624) ACPI: SSDT 3F68995B, 0692 (r1 SataRe SataSec 1000 INTL 20050624) ACPI: SSDT 3F688EB5, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) ACPI: SSDT 3F688E0F, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) ACPI: SSDT 3F688929, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:14 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:14 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Built 1 zonelists. Total pages: 257683 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c077c000 soft=c075c000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1729.072 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1021432k/1038848k available (2066k kernel code, 16756k reserved, 1092k data, 240k init, 121344k highmem) virtual kernel memory layout: fixmap : 0xffc56000 - 0xfffff000 (3748 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc071b000 - 0xc0757000 ( 240 kB) .data : 0xc0604a2a - 0xc0715cb4 (1092 kB) .text : 0xc0400000 - 0xc0604a2a (2066 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Calibrating delay using timer specific routine.. 3461.10 BogoMIPS (lpj=1730551) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfe9f3ff 00000000 00000000 00002940 0000c189 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: Intel Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c077d000 soft=c075d000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3458.01 BogoMIPS (lpj=1729008) CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9f3ff 00000000 00000000 00002940 0000c189 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c Total of 2 processors activated (6919.11 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=336 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=488 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=176 bytes sizeof(task_struct)=1376 bytes migration_cost=42 Time: 10:03:29 Date: 04/28/107 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS BUG #81[00000000] found PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:01: ioport range 0xfe00-0xfe7f has been reserved pnp: 00:01: ioport range 0xfe80-0xfeff has been reserved pnp: 00:01: ioport range 0xff00-0xff7f has been reserved pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved Time: tsc clocksource has been installed. PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: d6000000-d7ffffff PREFETCH window: d0000000-d1ffffff PCI: Bridge: 0000:00:1c.1 IO window: 3000-3fff MEM window: d8000000-d9ffffff PREFETCH window: d2000000-d3ffffff PCI: Bridge: 0000:00:1c.2 IO window: 4000-4fff MEM window: da000000-dbffffff PREFETCH window: d4000000-d5ffffff PCI: Bus 7, cardbus bridge: 0000:06:04.0 IO window: 00005000-000050ff IO window: 00005400-000054ff PREFETCH window: 50000000-53ffffff MEM window: 54000000-57ffffff PCI: Bridge: 0000:00:1e.0 IO window: 5000-5fff MEM window: dc000000-dc0fffff PREFETCH window: 50000000-53ffffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 17 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs...<6>Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 it is Freeing initrd memory: 3490k freed Simple Boot Flag at 0x36 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1180346609.342:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring
- Added public key F23BC8AFC0DD8B38
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: SSDT 3F68965B, 0238 (r1 PmRef Cpu0Ist 3000 INTL 20050624) ACPI: SSDT 3F689114, 04C2 (r1 PmRef Cpu0Cst 3001 INTL 20050624) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: SSDT 3F689893, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) ACPI: SSDT 3F6895D6, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) Time: hpet clocksource has been installed. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected an Intel 945GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xc0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 Yenta: CardBus bridge found at 0000:06:04.0 [1179:ff00] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:06:04.0, mfunc 0x10aa1b22, devctl 0x64 Yenta: ISA IRQ mask 0x0cf8, PCI irq 17 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff cs: IO port probe 0x5000-0x5fff: clean. pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 7:669:73 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 240k freed Write protecting the kernel read-only data: 820k USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected Clocksource tsc unstable (delta = -330234838 ns) ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0 synaptics: Toshiba Satellite A135 detected, limiting rate to 40pps. ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected input: SynPS/2 Synaptics TouchPad as /class/input/input1 input: AT Translated Set 2 keyboard as /class/input/input2 usb 2-1: new low speed USB device using uhci_hcd and address 2 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdc444000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected SCSI subsystem initialized libata version 2.20 loaded. ata_piix 0000:00:1f.2: version 2.10ac1 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15 scsi0 : ata_piix ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC7DP, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 ata1.00: configured for UDMA/100 scsi1 : ata_piix usb 2-1: new low speed USB device using uhci_hcd and address 3 usb 2-1: configuration #1 chosen from 1 choice input: Microsoft Basic Optical Mouse as /class/input/input3 input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.1-1 ata2.00: ATAPI, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5 SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.90 PQ: 0 ANSI: 5 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1180346616.236:2): selinux=0 auid=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) intel_rng: FWH not detected input: PC Speaker as /class/input/input4 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 20 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:06:04.3 [104c:803c] (rev 0) ACPI: PCI Interrupt 0000:06:04.3[D] -> GSI 19 (level, low) -> IRQ 20 mmc0: SDHCI at 0xdc005800 irq 20 DMA r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:05:00.0 to 64 eth0: RTL8101e at 0xf89e6000, 00:16:d4:97:2e:e5, IRQ 18 ACPI: PCI Interrupt 0000:06:04.2[C] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:06:04.1[B] -> GSI 17 (level, low) -> IRQ 16 fw_ohci: Added fw-ohci device 0000:06:04.1, OHCI version 1.10 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS... si3054: cannot initialize. EXT MID = 0000 fw_core: created new fw device fw0 (0 config rom retries) loop: loaded (max 8 devices) floppy0: no floppy controllers found lp: driver loaded but no devices found sonypi: Sony Programmable I/O Controller Driver v1.26. ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 BUG: warning at kernel/softirq.c:144/local_bh_enable() (Not tainted) [<c042b119>] local_bh_enable+0x4f/0x92 [<c060029d>] cond_resched_softirq+0x2c/0x42 [<c059add3>] release_sock+0x4f/0x9d [<c05c66ed>] tcp_sendmsg+0x90b/0x9f9 [<c059ad96>] release_sock+0x12/0x9d [<c05c7735>] tcp_recvmsg+0x8d2/0x9de [<c05dec75>] inet_sendmsg+0x3b/0x45 [<c0598711>] sock_aio_write+0xf6/0x102 [<c04753ea>] do_sync_readv_writev+0xc1/0xfe [<c04754ee>] do_sync_write+0xc7/0x10a [<c0436e71>] autoremove_wake_function+0x0/0x35 [<c0475d47>] vfs_write+0xbc/0x154 [<c0476342>] sys_write+0x41/0x67 [<c0404f70>] syscall_call+0x7/0xb [<c0600000>] __sched_text_start+0x708/0x89e ======================= ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) No dock devices found. input: Power Button (FF) as /class/input/input5 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input6 ACPI: Lid Switch [LID0] input: Power Button (CM) as /class/input/input7 ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found set_level status: 0 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) set_level status: 0 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k IA-32 Microcode Update Driver: v1.14a tigran@aivazian.fsnet.co.uk ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8116 buckets, 64928 max) r8169: eth0: link up r8169: eth0: link up audit(1180361043.446:3): audit_pid=1982 old=0 by auid=4294967295 Bridge firewalling registered [drm] Initialized drm 1.1.0 20060810 [drm] Initialized i915 1.6.0 20060119 on minor 0 [root@localhost ~]#
On 5/27/07, Jeff Guerdat jguerdat@gmail.com wrote:
Will Woods wrote:
Thanks to the merge, the whole wide world has access to "Koji", the build system. From there you can get packages as soon as they are built.
First, go to the koji web interface: http://koji.fedoraproject.org/koji/
And hit 'search' and search for the package 'kernel' and you'll get: http://koji.fedoraproject.org/koji/packageinfo?packageID=8
From there you can download the newest kernel. Be sure to comment on the bug if that kernel fixes your problem.
Heh! Tried 3201 out and it broke my suspend (restarts X coming out of suspend)...
-- Jeff Guerdat
The two most abundant things in the universe are hydrogen and stupidity. Harlan Ellison
-- fedora-test-list mailing list fedora-test-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list
On 06/01/2007 03:14 PM, Dr. Diesel wrote:
Dave, Chuck,
Can we provide any additional info? Not complaining (in fact, I don't even use sound on this machine), just hate to see the 6th most popular audio device (according to smolt) not work in FC7 final.
it works fine for most people. Each combination of vendor/BIOS/codec seems to be a little different and some just don't work.
Well, your welcome to poke around, i'll give you ssh access if it helps anyone out. This machines sole purpose it so play in rawhide, so crashing it is no problem!
On 6/1/07, Chuck Ebbert cebbert@redhat.com wrote:
On 06/01/2007 03:14 PM, Dr. Diesel wrote:
Dave, Chuck,
Can we provide any additional info? Not complaining (in fact, I don't even use sound on this machine), just hate to see the 6th most popular audio device (according to smolt) not work in FC7 final.
it works fine for most people. Each combination of vendor/BIOS/codec seems to be a little different and some just don't work.
-- fedora-test-list mailing list fedora-test-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list
Chuck, remember this worked fine in 2944, so whatever you were doing there worked.
On 6/1/07, Dr. Diesel dr.diesel@gmail.com wrote:
Well, your welcome to poke around, i'll give you ssh access if it helps anyone out. This machines sole purpose it so play in rawhide, so crashing it is no problem!
On 6/1/07, Chuck Ebbert cebbert@redhat.com wrote:
On 06/01/2007 03:14 PM, Dr. Diesel wrote:
Dave, Chuck,
Can we provide any additional info? Not complaining (in fact, I don't even use sound on this machine), just hate to see the 6th most popular audio device (according to smolt) not work in FC7 final.
it works fine for most people. Each combination of vendor/BIOS/codec seems to be a little different and some just don't work.
-- fedora-test-list mailing list fedora-test-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list
I also have a no sound problem under F 7 with intel-hda-audio (Gigabyte DS3 rev 3.3 MB integrated audio) which seems to have started happening after an update a few days ago, but not until I did a cold boot.
I get this error:
"Sound server informational message: Error while initializing the sound driver: device: default can't be opened for playback (No such file or directory) The sound server will continue, using the null output device."
[user@localhost [1] etc]$ cat modprobe.conf alias eth0 sky2 alias scsi_hostadapter pata_jmicron alias scsi_hostadapter1 ata_piix alias scsi_hostadapter2 ahci alias snd-card-0 snd-hda-intel options snd-card-0 index=0 options snd-hda-intel index=0 [user@localhost [2] etc]$
The first time this happened yesterday a warm reboot fixed it. I'm not sure how to diagnose whether this is a hardware problem, or a Linux problem...
Links: ------ [1] mailto:user@localhost [2] mailto:user@localhost
This is fixed in the test kernel (kernel-2.6.21-1.3255) on my Dell D820. With the new one, the ALSA system works and media players go out of the box. With earlier kenels, ALSA did not work, but the other sound system, OSS, did work, and programs that allow user to choose sould system could be made to work. system-config-sound will tell you what you need to know.
pj
ps: on the D820, the kernel boot line hpet=disable is needed. Otherwise it does not start. That's a known bug, AFAIK
On 7/10/07, critofur no-reply-gw@fcp.surfsite.org wrote:
I also have a no sound problem under F 7 with intel-hda-audio (Gigabyte DS3 rev 3.3 MB integrated audio) which seems to have started happening after an update a few days ago, but not until I did a cold boot.
I get this error:
"Sound server informational message: Error while initializing the sound driver: device: default can't be opened for playback (No such file or directory) The sound server will continue, using the null output device."
[user@localhost [1] etc]$ cat modprobe.conf alias eth0 sky2 alias scsi_hostadapter pata_jmicron alias scsi_hostadapter1 ata_piix alias scsi_hostadapter2 ahci alias snd-card-0 snd-hda-intel options snd-card-0 index=0 options snd-hda-intel index=0 [user@localhost [2] etc]$
The first time this happened yesterday a warm reboot fixed it. I'm not sure how to diagnose whether this is a hardware problem, or a Linux problem...
Links:
[1] mailto:user@localhost [2] mailto:user@localhost
-- This is an email sent via The Fedora Community Portal https://fcp.surfsite.org https://fcp.surfsite.org/modules/newbb/viewtopic.php?post_id=185060&topi... If you think, this is spam, please report this to webmaster@fcp.surfsite.org and/or blame critofur@yahoo.com.
-- fedora-test-list mailing list fedora-test-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list
Chuck, 3201 does not fix the sound.
On 5/25/07, Chuck Ebbert cebbert@redhat.com wrote:
On 05/25/2007 06:09 PM, Dr. Diesel wrote:
Still no go with the 3194 Kernel.
Dave, any idea when Chuck's patches will go in?
3201
-- fedora-test-list mailing list fedora-test-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list
On 5/27/07, Dr. Diesel dr.diesel@gmail.com wrote:
Chuck, 3201 does not fix the sound.
how have you tryed to play sound? also which mixer does the gnome-mixer-applet use? output of dmesg?
Default mixer is Intel HDA (Alsa mixer). Also listed is the RealTek ACL-861-VD (OSS). I tried both. I attempted to play with the SoundCard Detection utility and play an mp3 in Amarok.
According the the Soundcard utility here are the versions:
ALSA Driver version: 1.0.14.rc3 ALSA Lib packages: alsa-lib-1.0.14-0.4.rc3.fc7 ALSA Utils packages: alsa-utils-1.0.14-0.5.rc2.fc7
Here is dmesg: thanks!
[root@localhost ~]# dmesg Linux version 2.6.21-1.3201.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Thu May 24 19:23:45 EDT 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000003f580000 end: 000000003f680000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000003f680000 size: 0000000000080000 end: 000000003f700000 type: 4 copy_e820_map() start: 000000003f700000 size: 0000000000900000 end: 0000000040000000 type: 2 copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2 copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2 copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2 copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2 copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2 copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f680000 (usable) BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 118MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f7670 Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 259712) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 259712 early_node_map[1] active PFN ranges 0: 0 -> 259712 On node 0 totalpages: 259712 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 237 pages used for memmap HighMem zone: 30099 pages, LIFO batch:7 DMI present. Using APIC driver default ACPI: RSDP 000F75E0, 0014 (r0 TOSCPL) ACPI: RSDT 3F6888D5, 0054 (r1 TOSCPL TOSCPL00 6040000 LTP 0) ACPI: FACP 3F690C78, 0074 (r1 TOSCPL CALISTGA 6040000 LOHR 5A) ACPI Warning (tbfadt-0360): Ignoring BIOS FADT r1 C-state control [20070126] ACPI: DSDT 3F68A640, 6638 (r1 TOSCPL CALISTGA 6040000 INTL 20060608) ACPI: FACS 3F691FC0, 0040 ACPI: SLIC 3F690CEC, 0176 (r1 TOSCPL TOSCPL00 6040000 LOHR 0) ACPI: APIC 3F690E62, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A) ACPI: HPET 3F690ECA, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A) ACPI: MCFG 3F690F02, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A) ACPI: BOOT 3F690FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: APIC 3F690F70, 0068 (r1 PTLTD APIC 6040000 LTP 0) ACPI: SSDT 3F689FED, 064F (r1 SataRe SataPri 1000 INTL 20050624) ACPI: SSDT 3F68995B, 0692 (r1 SataRe SataSec 1000 INTL 20050624) ACPI: SSDT 3F688EB5, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) ACPI: SSDT 3F688E0F, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) ACPI: SSDT 3F688929, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:14 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:14 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Built 1 zonelists. Total pages: 257683 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c077c000 soft=c075c000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1729.167 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1021432k/1038848k available (2066k kernel code, 16756k reserved, 1092k data, 240k init, 121344k highmem) virtual kernel memory layout: fixmap : 0xffc56000 - 0xfffff000 (3748 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc071b000 - 0xc0757000 ( 240 kB) .data : 0xc0604a4a - 0xc0715cb4 (1092 kB) .text : 0xc0400000 - 0xc0604a4a (2066 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Calibrating delay using timer specific routine.. 3461.10 BogoMIPS (lpj=1730552) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfe9f3ff 00000000 00000000 00002940 0000c189 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: Intel Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c077d000 soft=c075d000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3458.04 BogoMIPS (lpj=1729020) CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9f3ff 00000000 00000000 00002940 0000c189 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c Total of 2 processors activated (6919.14 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=336 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=488 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=176 bytes sizeof(task_struct)=1376 bytes migration_cost=40 Time: 15:24:08 Date: 04/27/107 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS BUG #81[00000000] found PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:01: ioport range 0xfe00-0xfe7f has been reserved pnp: 00:01: ioport range 0xfe80-0xfeff has been reserved pnp: 00:01: ioport range 0xff00-0xff7f has been reserved pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved Time: tsc clocksource has been installed. PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: d6000000-d7ffffff PREFETCH window: d0000000-d1ffffff PCI: Bridge: 0000:00:1c.1 IO window: 3000-3fff MEM window: d8000000-d9ffffff PREFETCH window: d2000000-d3ffffff PCI: Bridge: 0000:00:1c.2 IO window: 4000-4fff MEM window: da000000-dbffffff PREFETCH window: d4000000-d5ffffff PCI: Bus 7, cardbus bridge: 0000:06:04.0 IO window: 00005000-000050ff IO window: 00005400-000054ff PREFETCH window: 50000000-53ffffff MEM window: 54000000-57ffffff PCI: Bridge: 0000:00:1e.0 IO window: 5000-5fff MEM window: dc000000-dc0fffff PREFETCH window: 50000000-53ffffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 17 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 Freeing initrd memory: 3489k freed Simple Boot Flag at 0x36 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1180279448.261:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key E17FAE2BF49726D6 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: SSDT 3F68965B, 0238 (r1 PmRef Cpu0Ist 3000 INTL 20050624) ACPI: SSDT 3F689114, 04C2 (r1 PmRef Cpu0Cst 3001 INTL 20050624) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: SSDT 3F689893, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) ACPI: SSDT 3F6895D6, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) Time: hpet clocksource has been installed. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected an Intel 945GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xc0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 Yenta: CardBus bridge found at 0000:06:04.0 [1179:ff00] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:06:04.0, mfunc 0x10aa1b22, devctl 0x64 Yenta: ISA IRQ mask 0x0cf8, PCI irq 17 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff cs: IO port probe 0x5000-0x5fff: clean. pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 7:986:437 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 240k freed Write protecting the kernel read-only data: 820k USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected Clocksource tsc unstable (delta = -352664629 ns) ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0 synaptics: Toshiba Satellite A135 detected, limiting rate to 40pps. input: SynPS/2 Synaptics TouchPad as /class/input/input1 input: AT Translated Set 2 keyboard as /class/input/input2 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdc444000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected SCSI subsystem initialized libata version 2.20 loaded. ata_piix 0000:00:1f.2: version 2.10ac1 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15 scsi0 : ata_piix ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC7DP, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 ata1.00: configured for UDMA/100 scsi1 : ata_piix ata2.00: ATAPI, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5 SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.90 PQ: 0 ANSI: 5 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1180279455.651:2): selinux=0 auid=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) input: PC Speaker as /class/input/input3 intel_rng: FWH not detected cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 20 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:05:00.0 to 64 eth0: RTL8101e at 0xf88fe000, 00:16:d4:97:2e:e5, IRQ 18 ACPI: PCI Interrupt 0000:06:04.1[B] -> GSI 17 (level, low) -> IRQ 16 fw_ohci: Added fw-ohci device 0000:06:04.1, OHCI version 1.10 ACPI: PCI Interrupt 0000:06:04.2[C] -> GSI 18 (level, low) -> IRQ 18 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:06:04.3 [104c:803c] (rev 0) ACPI: PCI Interrupt 0000:06:04.3[D] -> GSI 19 (level, low) -> IRQ 20 mmc0: SDHCI at 0xdc005800 irq 20 DMA ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS... si3054: cannot initialize. EXT MID = 0000 fw_core: created new fw device fw0 (0 config rom retries) loop: loaded (max 8 devices) floppy0: no floppy controllers found lp: driver loaded but no devices found sonypi: Sony Programmable I/O Controller Driver v1.26. ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 BUG: warning at kernel/softirq.c:144/local_bh_enable() (Not tainted) [<c042b119>] local_bh_enable+0x4f/0x92 [<c06002bd>] cond_resched_softirq+0x2c/0x42 [<c059adf3>] release_sock+0x4f/0x9d [<c05c670d>] tcp_sendmsg+0x90b/0x9f9 [<c059adb6>] release_sock+0x12/0x9d [<c05c7755>] tcp_recvmsg+0x8d2/0x9de [<c05dec95>] inet_sendmsg+0x3b/0x45 [<c0598731>] sock_aio_write+0xf6/0x102 [<c04753ea>] do_sync_readv_writev+0xc1/0xfe [<c04754ee>] do_sync_write+0xc7/0x10a [<c0436e71>] autoremove_wake_function+0x0/0x35 [<c0475d47>] vfs_write+0xbc/0x154 [<c0476342>] sys_write+0x41/0x67 [<c0404f70>] syscall_call+0x7/0xb [<c0600000>] __sched_text_start+0x6e8/0x89e ======================= ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) No dock devices found. input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input5 ACPI: Lid Switch [LID0] input: Power Button (CM) as /class/input/input6 ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found set_level status: 0 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) set_level status: 0 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k IA-32 Microcode Update Driver: v1.14a tigran@aivazian.fsnet.co.uk ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8116 buckets, 64928 max) r8169: eth0: link up r8169: eth0: link up audit(1180293880.146:3): audit_pid=1979 old=0 by auid=4294967295 Bridge firewalling registered [drm] Initialized drm 1.1.0 20060810 [drm] Initialized i915 1.6.0 20060119 on minor 0 usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice input: Microsoft Basic Optical Mouse as /class/input/input7 input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.1-1 [root@localhost ~]#
On 5/27/07, dragoran drago01@gmail.com wrote:
On 5/27/07, Dr. Diesel dr.diesel@gmail.com wrote:
Chuck, 3201 does not fix the sound.
how have you tryed to play sound? also which mixer does the gnome-mixer-applet use? output of dmesg?
-- fedora-test-list mailing list fedora-test-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list
On 5/27/07, Dr. Diesel dr.diesel@gmail.com wrote:
Default mixer is Intel HDA (Alsa mixer). Also listed is the RealTek ACL-861-VD (OSS). I tried both. I attempted to play with the SoundCard Detection utility and play an mp3 in Amarok.
ok but what does it control? I had the same problem because it used "line-in" but it should use pcm
Thanks, how do I know? Where do I look? This one is new to me!
Thanks Andy
On 5/27/07, dragoran drago01@gmail.com wrote:
On 5/27/07, Dr. Diesel dr.diesel@gmail.com wrote:
Default mixer is Intel HDA (Alsa mixer). Also listed is the RealTek ACL-861-VD (OSS). I tried both. I attempted to play with the SoundCard Detection utility and play an mp3 in Amarok.
ok but what does it control? I had the same problem because it used "line-in" but it should use pcm
-- fedora-test-list mailing list fedora-test-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list
On 5/27/07, Dr. Diesel dr.diesel@gmail.com wrote:
Thanks, how do I know? Where do I look? This one is new to me!
right click on the mixer applet and choose settings .. you should see some options (not the mixer itself only but also the controlls) which one is selected? it should be pcm.
Yes, PCM was selected.
On 5/27/07, dragoran drago01@gmail.com wrote:
On 5/27/07, Dr. Diesel dr.diesel@gmail.com wrote:
Thanks, how do I know? Where do I look? This one is new to me!
right click on the mixer applet and choose settings .. you should see some options (not the mixer itself only but also the controlls) which one is selected? it should be pcm.
-- fedora-test-list mailing list fedora-test-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list
On 5/27/07, Dr. Diesel dr.diesel@gmail.com wrote:
Yes, PCM was selected.
but still no sound? ok so its a different problem...
Correct, still no sound. Still a Kernel bug I bet. Kernel 2944 worked fine.
On 5/27/07, dragoran drago01@gmail.com wrote:
On 5/27/07, Dr. Diesel dr.diesel@gmail.com wrote:
Yes, PCM was selected.
but still no sound? ok so its a different problem...
-- fedora-test-list mailing list fedora-test-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list
--- "Dr. Diesel" dr.diesel@gmail.com wrote:
Correct, still no sound. Still a Kernel bug I bet. Kernel 2944 worked fine.
On 5/27/07, dragoran drago01@gmail.com wrote:
On 5/27/07, Dr. Diesel dr.diesel@gmail.com
wrote:
Yes, PCM was selected.
but still no sound? ok so its a different problem...
-- fedora-test-list mailing list fedora-test-list@redhat.com To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-test-list
-- fedora-test-list mailing list fedora-test-list@redhat.com To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-test-list
Dr. Diesel,
Out of curiosity, does the line blacklist snd-hda-intel
appear in /etc/modprobe.d/blacklist file Try to comment it out by putting in a "#" and reboot. One of the problems here is that there are 3 or so devices one being the pcm, the other the headphones and the third being the modem,
from /etc/modprobe.conf
remove snd-hda-intel { /usr/sbin/alsactl store 0
/dev/null 2>&1 || :
; }; /sbin/modprobe -r --ignore-remove snd-hda-intel options snd cards_limit=8 alias snd-card-0 snd-hda-intel options snd-hda-intel index=0
# ALSA modules to support sound modems. These should be loaded manually # if needed. For most people they just break sound support... blacklist snd-atiixp-modem blacklist snd-intel8x0m blacklist snd-via82xx-modem blacklist snd-hda-intel
I'll take a look at it tomorrow and hopefully we both have sound or at least get very close to achieving it.
Regards,
Antonio
____________________________________________________________________________________Got a little couch potato? Check out fun summer activities for kids. http://search.yahoo.com/search?fr=oni_on_mail&p=summer+activities+for+ki...
--- "Dr. Diesel" dr.diesel@gmail.com wrote:
Correct, still no sound. Still a Kernel bug I bet. Kernel 2944 worked fine.
On 5/27/07, dragoran drago01@gmail.com wrote:
On 5/27/07, Dr. Diesel dr.diesel@gmail.com
wrote:
Yes, PCM was selected.
but still no sound? ok so its a different problem...
-- fedora-test-list mailing list fedora-test-list@redhat.com To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-test-list
-- fedora-test-list mailing list fedora-test-list@redhat.com To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-test-list
Dr. Diesel,
Out of curiosity, does the line blacklist snd-hda-intel
appear in /etc/modprobe.d/blacklist file Try to comment it out by putting in a "#" and reboot. One of the problems here is that there are 3 or so devices one being the pcm, the other the headphones and the third being the modem,
from /etc/modprobe.conf
remove snd-hda-intel { /usr/sbin/alsactl store 0
/dev/null 2>&1 || :
; }; /sbin/modprobe -r --ignore-remove snd-hda-intel options snd cards_limit=8 alias snd-card-0 snd-hda-intel options snd-hda-intel index=0
# ALSA modules to support sound modems. These should be loaded manually # if needed. For most people they just break sound support... blacklist snd-atiixp-modem blacklist snd-intel8x0m blacklist snd-via82xx-modem blacklist snd-hda-intel
I'll take a look at it tomorrow and hopefully we both have sound or at least get very close to achieving it.
Regards,
Antonio
____________________________________________________________________________________Sick sense of humor? Visit Yahoo! TV's Comedy with an Edge to see what's on, when. http://tv.yahoo.com/collections/222
Thanks Antonio, I don't have snd-hda-intel blacklisted, here is the output:
# watchdog drivers blacklist i8xx_tco
# framebuffer drivers blacklist aty128fb blacklist atyfb blacklist radeonfb blacklist i810fb blacklist cirrusfb blacklist intelfb blacklist kyrofb blacklist i2c-matroxfb blacklist hgafb blacklist nvidiafb blacklist rivafb blacklist savagefb blacklist sstfb blacklist neofb blacklist tridentfb blacklist tdfxfb blacklist virgefb blacklist vga16fb
# ISDN - see bugs 154799, 159068 blacklist hisax blacklist hisax_fcpcipnp
On 5/27/07, Antonio Olivares olivares14031@yahoo.com wrote:
--- "Dr. Diesel" dr.diesel@gmail.com wrote:
Correct, still no sound. Still a Kernel bug I bet. Kernel 2944 worked fine.
On 5/27/07, dragoran drago01@gmail.com wrote:
On 5/27/07, Dr. Diesel dr.diesel@gmail.com
wrote:
Yes, PCM was selected.
but still no sound? ok so its a different problem...
-- fedora-test-list mailing list fedora-test-list@redhat.com To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-test-list
-- fedora-test-list mailing list fedora-test-list@redhat.com To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-test-list
Dr. Diesel,
Out of curiosity, does the line blacklist snd-hda-intel
appear in /etc/modprobe.d/blacklist file Try to comment it out by putting in a "#" and reboot. One of the problems here is that there are 3 or so devices one being the pcm, the other the headphones and the third being the modem,
from /etc/modprobe.conf
remove snd-hda-intel { /usr/sbin/alsactl store 0
/dev/null 2>&1 || :
; }; /sbin/modprobe -r --ignore-remove snd-hda-intel options snd cards_limit=8 alias snd-card-0 snd-hda-intel options snd-hda-intel index=0
# ALSA modules to support sound modems. These should be loaded manually # if needed. For most people they just break sound support... blacklist snd-atiixp-modem blacklist snd-intel8x0m blacklist snd-via82xx-modem blacklist snd-hda-intel
I'll take a look at it tomorrow and hopefully we both have sound or at least get very close to achieving it.
Regards,
Antonio
____________________________________________________________________________________Sick sense of humor? Visit Yahoo! TV's Comedy with an Edge to see what's on, when. http://tv.yahoo.com/collections/222
-- fedora-test-list mailing list fedora-test-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list
-
Andy Lawrence -
Antonio Olivares -
Chuck Ebbert -
drago01 -
Jeff Guerdat -
Paul Johnson -
potat0 -
sean darcy -
Will Woods