Hi, I had f7t4 installed and have been taking updates regularly and with every update some or the other feature stops working (no i am not complaining :) )
Wireless was working fine till 2.6.21-1.3189.fc7 but completely stopped after that. I did not do any change. In the new kernel or wireless tools network manager stopped showing wireless options.
This has happened with 2.6.21-1.319x.fc7, 2.6.21-1.3200.fc7 and 2.6.21-1.3207.fc8. I am not sure if this is kernel issue or network manager update issue or wireless tools.
my laptop: http://smolt.fedoraproject.org/show?UUID=22c8710a-e702-4bcb-b002-448a3e53805...
Can anyone please advice me what can I do to enable it again?
Thanks.
[amit@localhost ~]$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 01) 03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) 0b:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
On Thu, Jun 07, 2007 at 10:14:53PM +0530, Amit Rana wrote:
Hi, I had f7t4 installed and have been taking updates regularly and with every update some or the other feature stops working (no i am not complaining :) )
Wireless was working fine till 2.6.21-1.3189.fc7 but completely stopped after that. I did not do any change. In the new kernel or wireless tools network manager stopped showing wireless options.
This has happened with 2.6.21-1.319x.fc7, 2.6.21-1.3200.fc7 and 2.6.21-1.3207.fc8. I am not sure if this is kernel issue or network manager update issue or wireless tools.
The f8 kernels will be flaky for a while.
From time to time, the wireless patches may even be completely
dropped until such time that they get rediffed. This means various new drivers like iwl3945 etc will just disappear temporarily.
Dave
Hi-
Did anybody else see this. I just allowed the sw updater to run, but it aborted with an internal error. I last ran the updater only about a week ago.
I think there may have been some bad cross-dependency relations involved. The system (a recent Acer x86 laptop) can reboot, but some key system libs have been left in an unstable state and a lot of lib-related warnings are issued to the console during startup/shutdown. X now aborts on startup, but lucky for me, I normally run in text-mode anyway... ;)
ron
On Mon, Jul 16, 2007 at 09:27:30AM -0500, ron flory wrote:
Did anybody else see this. I just allowed the sw updater to run,
.....
The system (a recent Acer x86 laptop) can reboot, but some key system libs have been left in an unstable state and a lot of lib-related warnings are issued to the console during startup/shutdown.
The most likely you bumped into a problem of a kernel which says that is of one version and 'uname -r' shows a different one. Hence various modules are not found in an initial sequence and assorted pieces of userspace do not start.
That was mentioned already on this list, and there exist a correponding bugzilla report, and a temporary workaround was posted a few days ago. You can also boot some older kernel instead which does not suffer from the issue.
Michal
ron flory wrote:
Hi-
Did anybody else see this. I just allowed the sw updater to run, but it aborted with an internal error. I last ran the updater only about a week ago.
I think there may have been some bad cross-dependency relations involved. The system (a recent Acer x86 laptop) can reboot, but some key system libs have been left in an unstable state and a lot of lib-related warnings are issued to the console during startup/shutdown. X now aborts on startup, but lucky for me, I normally run in text-mode anyway... ;)
ron
I just updated and got an exception report today. attached is the report.
Running package-cleanup --problems showed a slew of errors. Updates-testing is enabled for me.
Jim
Setting up yum No Repositories Available to Set Up Reading local RPM database Processing all local requires Missing dependencies: Package atomorun requires libSDL_mixer-1.2.so.0 Package perl-SDL requires libSDL_mixer-1.2.so.0 Package freetennis requires libSDL_mixer-1.2.so.0 Package gl-117 requires libSDL_mixer-1.2.so.0 Package kdenetwork-devel requires kdelibs-devel Package pygame requires libSDL_mixer-1.2.so.0 Package kdepim-devel requires kdelibs-devel >= 6:3.5.7 Package hal-cups-utils requires cups Package ppracer requires libSDL_mixer-1.2.so.0 Package glibc-headers requires kernel-headers Package glibc-headers requires kernel-headers >= 2.2.1 Package kdevelop requires kdelibs-apidocs Package kdevelop requires kdelibs-devel >= 6:3.5.7 Package penguin-command requires libSDL_mixer-1.2.so.0 Package tuxpaint requires libSDL_mixer-1.2.so.0 Package pinball requires libSDL_mixer-1.2.so.0 Package desktop-printing requires cups Package gcompris requires libSDL_mixer-1.2.so.0 Package kdnssd-avahi-devel requires kdelibs-devel Package tuxtype2 requires libSDL_mixer-1.2.so.0 Package neverball requires libSDL_mixer-1.2.so.0 Package csmash requires libSDL_mixer-1.2.so.0 Package libgnomecups requires cups Package redhat-lsb requires /usr/bin/lp Package redhat-lsb requires /usr/bin/lpr Package kdebase-devel requires kdelibs-devel >= 3.5.7 Package viruskiller requires libSDL_mixer-1.2.so.0 Package fbg requires libwx_baseu-2.8.so.0 Package fbg requires libwx_baseu-2.8.so.0(WXU_2.8) Package fbg requires libwx_baseu_net-2.8.so.0 Package fbg requires libwx_baseu_xml-2.8.so.0 Package fbg requires libwx_gtk2u_adv-2.8.so.0 Package fbg requires libwx_gtk2u_aui-2.8.so.0 Package fbg requires libwx_gtk2u_core-2.8.so.0 Package fbg requires libwx_gtk2u_core-2.8.so.0(WXU_2.8) Package fbg requires libwx_gtk2u_html-2.8.so.0 Package fbg requires libwx_gtk2u_qa-2.8.so.0 Package fbg requires libwx_gtk2u_xrc-2.8.so.0 Package crack-attack requires libSDL_mixer-1.2.so.0 Package frozen-bubble requires libSDL_mixer-1.2.so.0 Package trackballs requires libSDL_mixer-1.2.so.0 Package starfighter requires libSDL_mixer-1.2.so.0 Package stellarium requires libSDL_mixer-1.2.so.0 Package gcompris-libs requires libSDL_mixer-1.2.so.0
Jim
Component: Software Updater Summary: TBedf28128 Progress.py:85:callback:TypeError: unsupported operand type(s) for /: 'int' and 'NoneType'
Traceback (most recent call last): File "/usr/sbin/pup", line 409, in _apply self.applyChanges(self.mainwin) File "/usr/lib/python2.5/site-packages/pirut/__init__.py", line 726, in applyChanges self.runTransaction(mainwin) File "/usr/lib/python2.5/site-packages/pirut/__init__.py", line 701, in runTransaction tserrors = yum.YumBase.runTransaction(self, tsprog) File "/usr/lib/python2.5/site-packages/yum/__init__.py", line 540, in runTransaction errors = self.ts.run(cb.callback, '') File "/usr/lib/python2.5/site-packages/pirut/Progress.py", line 85, in callback self.progress.set_fraction(self.num / self.total * (1 - PREP) + PREP) TypeError: unsupported operand type(s) for /: 'int' and 'NoneType'
Local variables in innermost frame: what: 8 h: (<rpm.hdr object at 0xc848020>, u'//var/cache/yum/updates-testing/packages/kdesdk-3.5.7-6.fc7.i386.rpm') self: <pirut.Progress.PirutTransactionProgress instance at 0xb9d644c> logmsg: amount: 0 user: total: 0 PREP: 0.25
-
Amit Rana -
Dave Jones -
Jim Cornette -
Michal Jaegermann -
ron flory