users April 2011

users@lists.fedoraproject.org

258 participants
299 discussions

Wallet mysteries
by Timothy Murphy 07 May '11

07 May '11

Is there a one-page explanation of wallet (actually I am using KDE Wallet) anywhere? On one laptop I have to give my wallet password everytime I go to my news account at news.eternal-september.org ; on my other laptop I am not asked for this. What is the explanation? And how can I stop this request being made?

4 5

anyone running android sdk to talk to a real phone on fedora 14?
by Tom Horsley 07 May '11

07 May '11

I can't figure out if this is a kernel problem or what (though I lean towards kernel since it works one way immediately after powering up the system and a different way after that). If I plug in my samsung intercept phone right after powering off then powering back up and booting fedora 14, I see this show up in /var/log/messages: Apr 23 22:31:52 zooty kernel: [ 242.131064] usb 2-3: new high speed USB device using ehci_hcd and address 4 Apr 23 22:31:52 zooty kernel: [ 242.354901] usb 2-3: New USB device found, idVendor=04e8, idProduct=681c Apr 23 22:31:52 zooty kernel: [ 242.354905] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Apr 23 22:31:52 zooty kernel: [ 242.374157] usb 2-3: can't set config #1, error -71 And lsusb shows this: Bus 002 Device 004: ID 04e8:681c Samsung Electronics Co., Ltd Galaxy Portal/Spica Android Phone which isn't really right as it is an Intercept, not a Galaxy. Now I unplug the phone, and leaving the system up, plug the phone back in again: unplug: Apr 23 22:38:48 zooty kernel: [ 658.159285] usb 2-3: USB disconnect, address 4 replug: Apr 23 22:39:26 zooty kernel: [ 696.061086] usb 2-3: new high speed USB device using ehci_hcd and address 5 Apr 23 22:39:26 zooty kernel: [ 696.257079] usb 2-3: device descriptor read/64, error -71 Apr 23 22:39:26 zooty kernel: [ 696.559082] usb 2-3: device descriptor read/64, error -71 Apr 23 22:39:26 zooty kernel: [ 696.762074] usb 2-3: new high speed USB device using ehci_hcd and address 6 Apr 23 22:39:27 zooty kernel: [ 696.957078] usb 2-3: device descriptor read/64, error -71 Apr 23 22:39:27 zooty kernel: [ 697.249077] usb 2-3: device descriptor read/64, error -71 Apr 23 22:39:27 zooty kernel: [ 697.452060] usb 2-3: new high speed USB device using ehci_hcd and address 7 Apr 23 22:39:38 zooty kernel: [ 707.854076] usb 2-3: device not accepting address 7, error -110 Apr 23 22:39:38 zooty kernel: [ 707.956083] usb 2-3: new high speed USB device using ehci_hcd and address 8 Apr 23 22:39:38 zooty kernel: [ 707.956083] usb 2-3: new high speed USB device using ehci_hcd and address 8 Apr 23 22:39:48 zooty kernel: [ 718.358072] usb 2-3: device not accepting address 8, error -110 Apr 23 22:39:48 zooty kernel: [ 718.358083] hub 2-0:1.0: unable to enumerate USB device on port 3 Apr 23 22:39:48 zooty kernel: [ 718.599078] usb 10-1: new full speed USB device using uhci_hcd and address 2 Apr 23 22:40:03 zooty kernel: [ 733.704071] usb 10-1: device descriptor read/64, error -110 Apr 23 22:40:19 zooty kernel: [ 748.911074] usb 10-1: device descriptor read/64, error -110 Apr 23 22:40:19 zooty kernel: [ 749.114059] usb 10-1: new full speed USB device using uhci_hcd and address 3 Apr 23 22:40:20 zooty kernel: [ 750.534082] hub 10-0:1.0: unable to enumerate USB device on port 1 It just goes completely wacko after the first time I plug it in. No matter how many times I plug in in after that, I'll see the same thing. On the other hand, an ancient crappy system I have with only usb 1 ports seems to work fine. It detects a communications device and creates a /dev/ttyACM0 (or something like that) as well as a storage device for the SD card. Does this sound like something I should report as a kernel bug?

5 12

installing gnome-bluetooth on LXDE spin brings in host of packages
by Ranjan Maitra 06 May '11

06 May '11

Hi, I am running the LXDE spin with a host of other packages and I tried to bring in gnome-bluetooth. %sudo yum install gnome-bluetooth Loaded plugins: fastestmirror, langpacks, presto, refresh-packagekit, remove- : with-leaves Adding en_US to language list Loading mirror speeds from cached hostfile * fedora: fedora.mirror.iweb.ca * rpmfusion-free: mirror.hiwaay.net * rpmfusion-free-updates: mirror.hiwaay.net * updates: fedora.mirror.iweb.ca Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package gnome-bluetooth.x86_64 1:2.32.0-1.fc14 set to be installed --> Processing Dependency: bluez >= 4.42 for package: 1:gnome-bluetooth-2.32.0-1.fc14.x86_64 --> Processing Dependency: control-center for package: 1:gnome-bluetooth-2.32.0-1.fc14.x86_64 --> Processing Dependency: obexd for package: 1:gnome-bluetooth-2.32.0-1.fc14.x86_64 --> Processing Dependency: gvfs-obexftp for package: 1:gnome-bluetooth-2.32.0-1.fc14.x86_64 --> Processing Dependency: pulseaudio-module-bluetooth for package: 1:gnome-bluetooth-2.32.0-1.fc14.x86_64 --> Running transaction check ---> Package bluez.x86_64 0:4.77-1.fc14 set to be installed ---> Package control-center.x86_64 1:2.32.0-1.fc14 set to be installed --> Processing Dependency: control-center-filesystem = 1:2.32.0-1.fc14 for package: 1:control-center-2.32.0-1.fc14.x86_64 --> Processing Dependency: gnome-settings-daemon >= 2.21.91-3 for package: 1:control-center-2.32.0-1.fc14.x86_64 --> Processing Dependency: gnome-desktop >= 2.30 for package: 1:control-center-2.32.0-1.fc14.x86_64 --> Processing Dependency: fprintd for package: 1:control-center-2.32.0-1.fc14.x86_64 --> Processing Dependency: libgnome-desktop-2.so.17()(64bit) for package: 1:control-center-2.32.0-1.fc14.x86_64 --> Processing Dependency: libgnomekbdui.so.4()(64bit) for package: 1:control-center-2.32.0-1.fc14.x86_64 --> Processing Dependency: libgnomekbd.so.4()(64bit) for package: 1:control-center-2.32.0-1.fc14.x86_64 --> Processing Dependency: libebook-1.2.so.10()(64bit) for package: 1:control-center-2.32.0-1.fc14.x86_64 --> Processing Dependency: libxklavier.so.16()(64bit) for package: 1:control-center-2.32.0-1.fc14.x86_64 --> Processing Dependency: libmetacity-private.so.0()(64bit) for package: 1:control-center-2.32.0-1.fc14.x86_64 ---> Package gvfs-obexftp.x86_64 0:1.6.6-1.fc14 set to be installed --> Processing Dependency: obex-data-server >= 0.3.4-6 for package: gvfs-obexftp-1.6.6-1.fc14.x86_64 ---> Package obexd.x86_64 0:0.29-1.fc14 set to be installed ---> Package pulseaudio-module-bluetooth.x86_64 0:0.9.21-7.fc14 set to be installed --> Processing Dependency: pulseaudio = 0.9.21-7.fc14 for package: pulseaudio-module-bluetooth-0.9.21-7.fc14.x86_64 --> Processing Dependency: libpulsecore-0.9.21.so()(64bit) for package: pulseaudio-module-bluetooth-0.9.21-7.fc14.x86_64 --> Running transaction check ---> Package control-center-filesystem.x86_64 1:2.32.0-1.fc14 set to be installed ---> Package evolution-data-server.x86_64 0:2.32.2-1.fc14 set to be installed --> Processing Dependency: libgweather.so.1()(64bit) for package: evolution-data-server-2.32.2-1.fc14.x86_64 --> Processing Dependency: libgdata.so.7()(64bit) for package: evolution-data-server-2.32.2-1.fc14.x86_64 ---> Package fprintd.x86_64 0:0.2.0-2.fc14 set to be installed --> Processing Dependency: libfprint.so.0()(64bit) for package: fprintd-0.2.0-2.fc14.x86_64 ---> Package gnome-desktop.x86_64 0:2.32.0-2.fc14 set to be installed --> Processing Dependency: system-backgrounds-gnome for package: gnome-desktop-2.32.0-2.fc14.x86_64 ---> Package gnome-settings-daemon.x86_64 0:2.32.1-1.fc14 set to be installed --> Processing Dependency: libpulse-mainloop-glib.so.0(PULSE_0)(64bit) for package: gnome-settings-daemon-2.32.1-1.fc14.x86_64 --> Processing Dependency: libpulse-mainloop-glib.so.0()(64bit) for package: gnome-settings-daemon-2.32.1-1.fc14.x86_64 ---> Package libgnomekbd.x86_64 0:2.32.0-1.fc14 set to be installed ---> Package libxklavier.x86_64 0:5.0-1.fc13 set to be installed ---> Package metacity.x86_64 0:2.30.3-1.fc14 set to be installed ---> Package obex-data-server.x86_64 1:0.4.5-1.fc13 set to be installed ---> Package pulseaudio.x86_64 0:0.9.21-7.fc14 set to be installed --> Running transaction check ---> Package laughlin-backgrounds-gnome.noarch 0:14.1.0-1.fc14 set to be installed ---> Package libfprint.x86_64 0:0.3.0-1.fc14 set to be installed ---> Package libgdata.x86_64 0:0.6.4-4.fc14 set to be installed ---> Package libgweather.x86_64 0:2.30.3-1.fc14 set to be installed ---> Package pulseaudio-libs-glib2.x86_64 0:0.9.21-7.fc14 set to be installed --> Finished Dependency Resolution Dependencies Resolved =============================================================================== Package Arch Version Repository Size =============================================================================== Installing: gnome-bluetooth x86_64 1:2.32.0-1.fc14 fedora 129 k Installing for dependencies: bluez x86_64 4.77-1.fc14 updates 376 k control-center x86_64 1:2.32.0-1.fc14 fedora 1.7 M control-center-filesystem x86_64 1:2.32.0-1.fc14 fedora 49 k evolution-data-server x86_64 2.32.2-1.fc14 updates 2.6 M fprintd x86_64 0.2.0-2.fc14 updates 41 k gnome-desktop x86_64 2.32.0-2.fc14 updates 1.0 M gnome-settings-daemon x86_64 2.32.1-1.fc14 updates 644 k gvfs-obexftp x86_64 1.6.6-1.fc14 updates 70 k laughlin-backgrounds-gnome noarch 14.1.0-1.fc14 fedora 4.6 k libfprint x86_64 0.3.0-1.fc14 updates 112 k libgdata x86_64 0.6.4-4.fc14 fedora 193 k libgnomekbd x86_64 2.32.0-1.fc14 fedora 149 k libgweather x86_64 2.30.3-1.fc14 fedora 3.5 M libxklavier x86_64 5.0-1.fc13 fedora 56 k metacity x86_64 2.30.3-1.fc14 fedora 1.2 M obex-data-server x86_64 1:0.4.5-1.fc13 fedora 81 k obexd x86_64 0.29-1.fc14 fedora 56 k pulseaudio x86_64 0.9.21-7.fc14 updates 566 k pulseaudio-libs-glib2 x86_64 0.9.21-7.fc14 updates 22 k pulseaudio-module-bluetooth x86_64 0.9.21-7.fc14 updates 68 k Transaction Summary =============================================================================== Install 21 Package(s) Total download size: 13 M Installed size: 60 M Is this ok [y/N] Question: are all these really necessary dependencies, or are they just brought in as a historical relic over successive packagings? Best wishes, Ranjan

2 1

Firefox 4 ?
by Mickey 04 May '11

04 May '11

When will Firefox 4 be coming to Fedora 14 ?

11 11

So where are my workspaces??
by Beartooth 01 May '11

01 May '11

Having had trouble with F15 media, I told preupgrade on an expendable (heavily backed up) pc to go to F15 beta. It did, eventually, after taking an amazingly long time -- and looks worse, so far, than I had feared. I logged in, and it put me onto what has always been my workspace #1. But there are no panels, let alone a workspace switcher; and right- clicking does nothing anywhere. I have it doing yum update at present, also going through an amazing lot of stuff. Will that enable me to orient myself? Or is this release a total loss already for all but Alpha Plus Technoids? -- Beartooth Staffwright, Neo-Redneck Not Quite Clueless Power User I have precious (very precious!) little idea where up is.

13 39

F14 scanner no longer recognised!
by mike cloaked 01 May '11

01 May '11

Until a few months ago my scanner attached to the usb port on my machine was working fine under F14. It needed a simple: Add two lines to /lib/udev/rules.d/65-libsane.rules under the Samsung Lines: # Samsung SCX-4500W ATTRS{idVendor}=="04e8", ATTRS{idProduct}=="342b", ENV{libsane_matched}="yes" and then firing up the Gimp I could scan immediately - however I have not used the scanner for a few months and today when I needed it there it is not recognised. I tried (as root): sane-find-scanner - and it gives: "found USB scanner (vendor=0x04e8 [Samsung Electronics Co., Ltd.], product=0x342b [SCX-4500W Series]) at libusb:001:002" but yet: "[root@home1 ~]# scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages)." My original config is still as it was (I checked) - and also the /etc/sane.d/dll.conf still contains the "xerox_mfp" entry at the bottom that used to be needed. I also made selinux permissive in case that was the issue - and it was the same - Does anyone know if something has changed in F14 recently that may have been the cause of this change to scanner recognition - or a way to work around this? Thanks -- mike c

3 5

lvreduce
by Patrick Dupre 30 Apr '11

30 Apr '11

Hello, I would like to reduce the size of a lvm2 partition (ext4) without losing data. I am confuse by resizef2s and lvresize. Could you tell me the exact way of doing. Thank. -- --- ========================================================================== Patrick DUPRÉ | | Department of Chemistry | | Phone: (44)-(0)-1904-434384 The University of York | | Fax: (44)-(0)-1904-432516 Heslington | | York YO10 5DD United Kingdom | | email: patrick.dupre(a)york.ac.uk ==========================================================================

3 2

HELP - Fedora 14 with kernel 2.6.39-rc5
by John Wendel 30 Apr '11

30 Apr '11

I've got a couple of boxes running F14 and I thought I'd play with a 2.6.39 kernel. I currently run 2.6.38.4 on both, so I do know how to build a kernel. I tried my working 2.6.38 kernel config files and the latest Fedora kernel configs as starting points. Long story short, I can't get any video out of either box. One has a radeon card and the other has nvidia. The system boots, and I can ssh in, but no pretty pictures. I'm stuck. Any hints will be appreciated. Thanks, John

4 14

Fedora 14 , File System Crash - Please Help !!!
by Mickey 30 Apr '11

30 Apr '11

Fedora 14 File System crash on reboot. Buffer I/O error on device sda2, logical block 20980338 thru 20980346 I tried to run FSCK and it won't fix the problem

3 10

Serial Port for Root Only
by mike 30 Apr '11

30 Apr '11

I have a USB serial adapter I am trying to use as a seial console device for putty. It is identified and works like a champ for root but will not work for any other user. For anyone other than root putty returns "Unable to Open Port". I have checked proc/bus/usb/devices and can find nothing that would restrict use. Is there somewhere else I should be looking? Thanks

4 6

← Newer
1
2
3
4
5
6
7
...
30
Older →

Jump to page: