users April 2016

users@lists.fedoraproject.org

109 participants
109 discussions

Kickstart Help
by Alex Thomas 25 Apr '16

25 Apr '16

Looking for help in building a .ks file for my laptop. I have looked at the anaconda-ks.cfg file you are given when installing Fedora 23 Workstation, and it seams like all of the disk partitioning information is missing. Is this file a condensed version with some shortcuts? Is there another file I should be looking at as I teach myself about kickstart? Specifically I want to build a ks file that for partitioning I can set up so it does full disk encryption with / = ext4 and /home = xfs . Thank you, Alex Thomas

3 2

Has anyone configured Fedora to use a joystick as a mouse, or know of a tutorial?
by stan 23 Apr '16

23 Apr '16

The subject says it. I find instructions on the web, but they seem to be more about dual use with gaming, and for more modern hardware. I just want to use an old joystick as an ergonomic mouse replacement, kind of like a weird trackball. And if I have to, I'll muck about and muddle through to try to get it working. But if someone can point to a tutorial that specifically targets Fedora, that would be great. I've found xboxdrv, antimicro, and qjoydrv so far, though the last seems to be obsolete. If you know that this doesn't work in the latest Fedoras, that would be useful to know also. https://steamcommunity.com/app/221410/discussions/0/558748653738497361/#p2 http://askubuntu.com/questions/114895/how-can-a-gamepad-control-the-mouse

1 0

filesystem error
by Jeffrey Ross 22 Apr '16

22 Apr '16

I have the following error reported in my logs, I've had it for quite some time and through several reboots EXT4-fs (md2): error count: 1 EXT4-fs (md2): initial error at 1452554514: ext4_lookup:1343: inode 1308162 EXT4-fs (md2): last error at 1452554514: ext4_lookup:1343: inode 1308162 md2 is my root partition, I ran "find / -mount -inum 1308162" find didn't return any value. How can I track down this error, identify what file it refers to and clear the error out? if it matters, its an older Fedora system (16 to be exact) Thanks, Jeff

6 9

Cant read superblocks
by Weiner, Michael 22 Apr '16

22 Apr '16

I have a Dell PowerEdge R910 with a PERC 700 controller that has a virtual drive configured as a RAID 5 with 15 disks in it. We're running CentOS 5.10 at the moment, and I created a 15Tb ext3 filesystem on that RAID group (set this up a few years back) that has been running fine up until yesterday. I had the opportunity to add another PERC H810 controller along with a PowerVault MD1200 to add more space (44Tb as XFS), but when we went to turn the server back on, we noticed one of the disks in the RAID group had apparently failed. I didn't think much of it at the time, as it was a RAID 5, but when the server came up and I tried to mount it, I received the following error: mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so I tried to get a listing of backup superblocks by doing the following: [root@raos_apps01 ~]# mke2fs -b 8192 -n /dev/sdb1 Warning: blocksize 8192 not usable on most systems. mke2fs 1.39 (29-May-2006) mke2fs: 8192-byte blocks too big for system (max 4096) Proceed anyway? (y,n) y Warning: 8192-byte blocks too big for system (max 4096), forced to continue Filesystem label= OS type: Linux Block size=8192 (log=3) Fragment size=8192 (log=3) 1828894848 inodes, 1830420355 blocks 91521017 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=4311218176 27934 block groups 65528 blocks per group, 65528 fragments per group 65472 inodes per group Superblock backups stored on blocks: 65528, 196584, 327640, 458696, 589752, 1638200, 1769256, 3210872, 5307768, 8191000, 15923304, 22476104, 40955000, 47769912, 143309736, 157332728, 204775000, 429929208, 1023875000, 1101329096, 1289787624 But I am unable to actually use any of these, as they all end up giving the same error: [root@raos_apps01 ~]# e2fsck -b 65528 /dev/sdb1 e2fsck 1.39 (29-May-2006) e2fsck: Bad magic number in super-block while trying to open /dev/sdb1 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> any idea how I can get the FS back? I ordered another drive to replace the failed on thinking that *might* be part of the problem, so I will have to wait and see on that, but I SHOULD be able to mount it, but I am not able to. Thanks in advance Michael =================================== Please consider the environment before printing this e-mail Cleveland Clinic is ranked as one of the top hospitals in America by U.S.News & World Report (2015). Visit us online at http://www.clevelandclinic.org for a complete listing of our services, staff and locations. Confidentiality Note: This message is intended for use only by the individual or entity to which it is addressed and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. Thank you.

5 43

mate autologin
by Pasha R 22 Apr '16

22 Apr '16

Hi all, I'm using Fedora 23 with mate and trying to setup autologin. I edited a file /etc/lightdm/lightdm.conf and uncommented lines autologin-user=pasha autologin-user-timeout=0 but after boot, I still get a login window. I also tried to uncomment pam-autologin-service=lightdm-autologin then after boot, I got login window with message "Unable to authenticate" over it. Any ideas where else to look? Thanks.

1 0

Bitmap font resizer (or: good classic-style terminal font)?
by Chris Adams 21 Apr '16

21 Apr '16

I guess I've been using xterm forever, and I'm really used to the classic X "fixed" font (aka "6x13"). However, as display DPI has gone up, it has gotten a little harder to see. I got a new notebook today with a 14" 2560x1440 display (210 DPI), and "fixed" isn't going to work any more. Is there an easy tool that could take the old bitmap font and double the size? That would probably be about right on this new display. In a perfect world, somebody would create a TrueType vector font with the same outline, but that's beyond my ability. Alternately: is there a good vector/scalable font that has a similar look? -- Chris Adams <linux(a)cmadams.net>

2 2

dnf - deprecated update cmd
by Jon LaBadie 20 Apr '16

20 Apr '16

On F22, the manpage for dnf says the update and update-to commands are deprecated aliases for upgrade and upgrade-to. That being the case, shouldn't the update-info and check-update commands also be deprecated and have corresponding upgrade versions? jl -- Jon H. LaBadie jonfu(a)jgcomp.com

11 21

How to fix : GPG key retrivial failed
by Angelo Moreschini 20 Apr '16

20 Apr '16

Hi, I cannot finish the installation of VLC 'because in my computer there' is not the key GCG. The *command*:* sudo install VLC* ends with the error message: GPG key retrieval failed: [Errno 14] curl # 37 - "Could not open file / etc / pki / rpm-gpg / RPM-GPG-KEY-RPMFusion-free-fedora-21" to my knowledge, it should be, in the / etc / pki / rpm-gpg, the file / RPM-GPG-KEY-RPMFusion-free-fedora-21 (which has the encryption key required for installation). I do not know the reason, but I didn't get this file, and currently the installation can not 'be completed ... May some one sais me *how I can find and import this file* (/ RPM-GPG-KEY-RPMFusion-free-fedora-21) on my computer?? Thank you Angelo

3 12

Libvirt networking question
by Patrick O'Callaghan 20 Apr '16

20 Apr '16

I've been occasionally using a Windows 7 VM with the libvirt system for several months now and have had no problems up to now. However recently I've been getting error messages from Windows about the network being "unknown" and my shared host/guest volume is unavailable. On the most recent attempt I see: Virtual network 'default': NAT (Inactive) as the entry under the Network Source drop-down in Virtual Machine Manager's "Show Hardware Details" menu. This is most likely PEBKAC but I'd be grateful for a newbie's guide to how this stuff should be set up without straying too far from defaults. My goal is pretty simple: a bridged network to get shared folders with my Fedora 23 host and Internet client access from the guest. poc

4 22

Blank screen after 5 minutes idle
by Timothy Murphy 19 Apr '16

19 Apr '16

I'm running Fedora/KDE 23 on a ThinkPad T510 laptop. If I leave the laptop open but idle for about 5 minutes the screen goes blank, and I see no way to "wake" it. The laptop seems to be alive, as the WiFi LED is flashing, and Ctrl-Alt-Delete causes the disk LED to flash briefly. I've tried everything I can to wake the laptop, including many combinations of Fn, Ctrl, Alt and F*, as well as what I take to be the SysReq button. But the only solution I have found to date is to power-off and power-on again. Any suggestions? -- Timothy Murphy gayleard /at/ eircom.net School of Mathematics, Trinity College, Dublin

4 4

← Newer
1
2
3
4
5
6
7
...
11
Older →