users April 2018

users@lists.fedoraproject.org

107 participants
91 discussions

How to turn on networking from rescue boot
by vendor＠billoblog.com 29 Oct '18

29 Oct '18

So... I did a "sudo dnf upgrade" and things seemed to do well. However, when I rebooted, it hangs on bootup with the statment "Holding until bootup processes complete" or something like that -- I'm doing this from memory. I tried with a couple of older kernels, but they also hung. I assume that this is some transient thing associated with the upgrade. Over the years, I've had glitches appear on an upgrade and disappear on the next upgrade. Accordingly, I'd like to boot into rescue mode and see if I can upgrade again. However, I've forgotten how to turn on wifi networking from rescue mode. Can anybody point me to a tutorial? Thanks, billo

6 5

suspends shutdowns system instead of suspending
by Sudhir Khanger 21 Jul '18

21 Jul '18

Hi, A new bug has cropped up on my system Dell Precision 5510 running Fedora 25 Plasma Desktop. Anytime I suspend my device it shutdowns and obviously I lose all my unsaved work. I have tried all the kernel currently installed on my system 4.10.10-200.fc25.x86_64, 4.10.9, and 4.10.8. I have also tried downgrading systemd to systemd-231-10.fc25.x86_64. I continue to have the problem. sysinfo - https://paste.fedoraproject.org/paste/9nY1-YH4IKXt4wJhyIbMGV5M1UNdIGYhyRLiv… dmesg - https://paste.fedoraproject.org/paste/WK2NAqy3PRxrR6Fze2baIl5M1UNdIGYhyRLiv… What I can do to troubleshoot the problem?

8 17

4% battery; dpesn't suspend
by Dave Mitchell 02 Jun '18

02 Jun '18

F27. I ran a new laptop battery down to 4% (as claimed by gnome) and my laptop didn't auto-suspend, nor hibernate. In settings / power, the only option for battery power these days seems to be to automatically suspend after a set time period; not at a certain battery level. So a) did I imagine it that earlier fedoras used to have this feature? b) any way I can enable auto-suspect on low battery for F27? -- print+qq&$}$"$/$s$,$a$d$g$s$@$.$q$,$:$.$q$^$,$@$a$~$;$.$q$m&if+map{m,^\d{0\,},,${$::{$'}}=chr($"+=$&||1)}q&10m22,42}6:17a2~2.3@3;^2dg3q/s"&=~m*\d\*.*g

6 15

H.264 video broken after updating to Fedora 28
by Sam Varshavchik 25 May '18

25 May '18

After upgrading to Fedora 28, most of Youtube is broken in Firefox, claiming lack of H.264 codec support. Googling around, found this: https://fedoraproject.org/wiki/OpenH264 But none of the packages are currently available: [root@thinkpad yum.repos.d]# dnf config-manager --set-enabled fedora-cisco-openh264 [root@thinkpad yum.repos.d]# dnf install gstreamer1-plugin-openh264 mozilla-openh264 Last metadata expiration check: 0:00:00 ago on Thu 26 Apr 2018 09:40:47 PM EDT. No match for argument: gstreamer1-plugin-openh264 No match for argument: mozilla-openh264 Error: Unable to find a match Meanwhile, back on Fedora 27, H.264 video works fine in Firefox, without any of this.

9 27

portable (really) Fedora on stick
by Aleksandar Kostadinov 21 May '18

21 May '18

Hi, I'm reading documentation [1] for Fedora on a USB stick. The only option to have a portable fedora on a stick seems to be by creating an overlay FS and this certainly leads to getting out of disk space at some point. I would really like to create Fedora on USB that I can plug anywhere and work off it. I was thinking that perhaps I can just install regular fedora on a USB stick like I would do on a hard drive. Then it can be updated and used just like any other Fedora machine. Perhaps disable persistent logging and swap so that flash memory doesn't wear out. One issue I presently know about is dracut. It creates by default images that only support a specific hardware. i.e. if I install kernel on a machine with an nforce disk controller, it will put in intird only that module thus Fedora will not boot on a machine with AHCI controller. Maybe this wouldn't matter when all things are on the USB drive but then can there be a problem with different USB controller modules? I was wondering if anybody tried that and has tips for greated portability. Thank you, Aleksandar [1] https://docs.fedoraproject.org/quick-docs/en-US/creating-and-using-a-live-i…

7 11

alternative to skype
by Patrick Dupre 18 May '18

18 May '18

Hello, Is there an alternative to skype which would also allow me to exchange documents ? Thank. =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire de Physico-Chimie de l'Atmosphère | | Université du Littoral-Côte d'Opale | | Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44 189A, avenue Maurice Schumann | | 59140 Dunkerque, France ===========================================================================

24 61

Fonts in F27
by Gordon Messmer 11 May '18

11 May '18

After upgrading to F27, I noticed that fonts looked "off". I made a screenshot of Thunderbird and gnome-terminal displaying roughly identical contents on Fedora 25, 26, and 27. The older two releases are identical, but F27's fonts (both fixed-width and variable-width) appear to be the same width as they were previously, but taller. Characters like monospace 'o' used to be round and are now oblong. Everything seems slightly heavier as a result of the additional pixels. Does anyone know if this change was intentional? Personally, I think it's worse than before.

5 6

empty messages from fedora users list.
by William Mattison 10 May '18

10 May '18

Good morning, Since March 08, I've received 11 messages from this list that appear empty, including 2 so far today. I have received a few (less) not empty, none today and 3 yesterday. What's causing this problem, and how do I fix it? My e-mail client is Thunderbird 52.5.2. I will occasionally check the Fedora Hyperkitty for replies. thanks, Bill.

9 61

printer and Fedora support.
by home user 08 May '18

08 May '18

I'm having to replace my 5-year old desktop printer. Like any good project, I start with requirements! 1. desktop printer. 2. the manufacturer provides real support for the printer running on Fedora as well as windows-7. 3. has printing, scanning, and copying. 4. color and black-and-white, colors are correct when printing from Fedora as well as when from windows-7. 5. at least 600 dpi. 6. USB cable connection (not ethernet or wi-fi) between printer and workstation's tower. 7. either laser or LED, not ink-jet (I'm in a very low-humidity climate). I am especially concerned with requirement #1, and that's why I'm asking this list. What fulfils all the above requirements? Support needs to be more than simply providing a driver for me to download. The at least 600 DPI has to be real, not merely "effective", "simulated", etc. My now dead printer, a Xerox Workcentre 6015, claimed either 1200x1200 or 1200x2400 resolution, but I only got 600 real dots per inch, both in windows-7 and in Fedora. When printing from Fedora, colors were not even close, but were ok when printing from windows-7. Which is better overall: laser or LED? Thank-you for your advice. Bill.

10 17

F26 update: gnome-terminal doesn't launch; locale issues
by Mike Zingale 07 May '18

07 May '18

I just did an update from F25 to F26 via dnf. After it boots, I can no longer start gnome terminal (nothing shows). If I ssh into the machine and try it remotely, I see the following: $ gnome-terminal (process:3586): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. Error constructing proxy for org.gnome.Terminal:/org/gnome/Terminal/Factory0: Error calling StartServiceByName for org.gnome.Terminal: Timeout was reached So it looks like there is a locale issue in my update. Does anyone know how to fix this?

2 2

← Newer
1
2
3
4
5
6
7
8
9
10
Older →