users August 2018

users@lists.fedoraproject.org

102 participants
89 discussions

Regionset - a little known utility that is a globetrotter's friend
by Temlakos 31 Aug '18

31 Aug '18

Everyone: I don't bring a question or a complaint here. I want to mention a utility I never even knew was part of Fedora. But it is, and it's a great boon to anyone who wants to sample DVD content from regions other than your region of residence. It's called: regionset. It resets the region code of any internal /or external/ DVD player/burner, /no matter how it's connected/. I just used it to reset the region on a USB-connected external burner (Samsung/TSST BDDVDW SE-506BB TS00). Installation is a breeze. If you have the Fedora repos enabled (and, being in this community, of course you do), execute: sudo dnf install regionset (Replace "sudo" with "su -c" if you're not a member of the "wheel" group.) To use, execute: sudo regionset /dev/dvd where you replace "dvd" with a particular device name. (My system does not use the dvd name. It numbers my drives sr0, sr1, etc. I used vlc to figure out the device name.) Make sure you load a disk in the drive before you begin! Otherwise it will throw an error and tell you to make sure you put a readable disk in. When you get through, you get back the make and model of the drive, the current region code (if it has one--the SE-506BB didn't have one), how many times the /vendor/ can change the code, and how many times /you/ (the user) can change the code. Then it asks you whether you want to change the code or not. If you do, then it asks you to specify a region (1 through 8, according to convention) and confirm twice. (The second confirmation shows you the proper "back mask." Second-guessing that is an advanced concept.) If successful, it will confirm that for you. What does that mean? Well, if you're used to traveling extensively and picking up optical media along the way, you need to do one of two things: 1. Shell out big bucks (or quid or euros or whatever) to buy a multiregion player. (Do /not/ bother with the old region-free players! Studios are wise to that and now encrypt their disks so that they will play in one region and /only/ one region. If your player doesn't have the code to match, you're out of luck. Which is why I /had to/ set the region on my SE-506BB to play anything other than a Region 1 disk. But some of the new players will read the region code on the disk and adapt to it pro-actively.) 2. Have at least one drive available so that you can reset its region. Depending on how many regions you regularly visit, I'd recommend buying as many external USB drives as you have regions (other than your home region) you travel to, setting one for each region, and labeling them. Problem solved. Of course if you travel the whole world, you might as well get one of those standalone multi-region machines. Beyond a certain point, you'll pay more for the extra drives than for one device. (Except for one thing: when you're on the road, those little portable drives are a lot easier to carry, and to power up, than a big monster you have to lug around and entrust to non-gentloe baggage handlers and customs officers!) I don't do that. I use disks from Regions 1 and 2. (Some titles aren't available in Region 1, and my retailer will import them.) I then /rip/ the disks so I have the playable files on hand. But: /to do that, I needed a drive set to Region 2 to rip my Region 2 material/. Now I have that. And I just used MakeMKV to rip a Region 2 disk. Success. Temlakos

1 0

Software to create bootable USB stick
by Danny Horne 31 Aug '18

31 Aug '18

Hi all, I'm running Fedora Workstation 28. What software can I use to install a downloaded OS .ISO onto a USB stick so the OS can be installed on another machine? Thanks for looking

8 10

[F28] dnf upgrade -> failure to remove sssd-libwbclient-devel and other errors
by Frédéric 29 Aug '18

29 Aug '18

Hi, I have just upgraded one of my F28 systems and got many errors, in particular related to sssd-libwbclient-devel (failed to remove), chromium (value error) and kernel (failed to remove 4.17.12). Below is an exerpt of the log (sorry, it's in French). Is this a problem? Is my system corrupted now? Kind regards, F # dnf upgrade -y Dernière vérification de l’expiration des métadonnées effectuée il y a 0:48:33 le mer. 29 août 2018 20:46:25 CEST. ... Téléchargement des paquets : ... [MIRROR] kolourpaint-18.04.3-1.fc28.x86_64.rpm: Curl error (56): Failure when receiving data from the peer for http://ftp.lip6.fr/ftp/pub/linux/distributions/fedora/updates/28/Everything… [Recv failure: Connection reset by peer] [MIRROR] ktouch-18.04.3-1.fc28.x86_64.rpm: Curl error (56): Failure when receiving data from the peer for http://ftp.lip6.fr/ftp/pub/linux/distributions/fedora/updates/28/Everything… [Recv failure: Connection reset by peer] ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Total 1.4 MB/s | 669 MB 08:08 Delta RPMs a réduit la taille des mises à jour de 753.2 Mio à 668.9 Mio (11.1% économisés) Test de la transaction en cours La vérification de la transaction a réussi. Lancement de la transaction de test Transaction de test réussie. Exécution de la transaction ... Mise à jour de : chromium-68.0.3440.106-3.fc28.x86_64 173/567 Exécution du scriptlet: chromium-68.0.3440.106-3.fc28.x86_64 173/567 ValueError: File context for /usr/lib/chromium-browser already defined ValueError: File context for /usr/lib/chromium-browser/chromium-browser.sh already defined ValueError: File context for /usr/lib/chrome-sandbox already defined Mise à jour de : geogebra5-5.0.488.0-636770.x86_64 264/567 Exécution du scriptlet: geogebra5-5.0.488.0-636770.x86_64 264/567 /var/tmp/rpm-tmp.MPdKp1: ligne 1: /usr/local/bin/update-mime-database: No such file or directory ... Suppression de : kmod-nvidia-340xx-4.17.12-100.fc27.x86_64-1:340.107-2.fc27.x86_64 331/567 Exécution du scriptlet: kmod-nvidia-340xx-4.17.12-100.fc27.x86_64-1:340.107-2.fc27.x86_64 331/567 Exécution du scriptlet: sssd-libwbclient-devel-1.16.3-1.fc28.x86_64 332/567 /var/lib/alternatives/libwbclient.so-64 est vide ! erreur : %preun(sssd-libwbclient-devel-1.16.3-1.fc28.x86_64) scriptlet échoué, état de sortie 2 Error in PREUN scriptlet in rpm package sssd-libwbclient-devel Error in PREUN scriptlet in rpm package sssd-libwbclient-devel Nettoyage de : perl-Pod-Perldoc-3.28-396.fc28.noarch 333/567 erreur : sssd-libwbclient-devel-1.16.3-1.fc28.x86_64: effacer échoué ... Suppression de : kernel-devel-4.17.12-100.fc27.x86_64 504/567 Exécution du scriptlet: None 505/567 /var/lib/alternatives/libwbclient.so-64 est vide ! erreur : %preun(sssd-libwbclient-devel-1.16.2-4.fc27.x86_64) scriptlet échoué, état de sortie 2 Error in PREUN scriptlet in rpm package sssd-libwbclient-devel Error in PREUN scriptlet in rpm package sssd-libwbclient-devel Nettoyage de : pango-1.42.3-1.fc28.i686 506/567 erreur : sssd-libwbclient-devel-1.16.2-4.fc27.x86_64: effacer échoué Exécution du scriptlet: pango-1.42.3-1.fc28.i686 506/567 ... Nettoyage de : geogebra5-5.0.486.0-635380.x86_64 510/567 Exécution du scriptlet: geogebra5-5.0.486.0-635380.x86_64 510/567 /var/tmp/rpm-tmp.ibufyA: ligne 1: /usr/local/bin/update-mime-database: No such file or directory ... Exécution du scriptlet: kernel-core-4.17.12-100.fc27.x86_64 528/567 Suppression de : kernel-core-4.17.12-100.fc27.x86_64 528/567 attention : fichier /lib/modules/4.17.12-100.fc27.x86_64/updates : échec de la suppression : No such file or directory ... Exécution du scriptlet: sssd-libwbclient-devel-1.16.3-2.fc28.x86_64 567/567 /var/lib/alternatives/libwbclient.so-64 est vide ! attention : %posttrans(sssd-libwbclient-devel-1.16.3-2.fc28.x86_64) scriptlet échoué, état de sortie 2 Non-fatal POSTTRANS scriptlet failure in rpm package sssd-libwbclient-devel Non-fatal POSTTRANS scriptlet failure in rpm package sssd-libwbclient-devel ... Vérification de : sssd-proxy-1.16.3-1.fc28.x86_64 524/566 sssd-libwbclient-devel-1.16.3-1.fc28.x86_64 est censé être supprimé, mais ne l’est pas ! Vérification de : sssd-libwbclient-devel-1.16.3-1.fc28.x86_64 525/566 Vérification de : sssd-nfs-idmap-1.16.3-1.fc28.x86_64 526/566 ... Échec: sssd-libwbclient-devel.x86_64 1.16.3-2.fc28 Erreur : La transaction a échoué

2 1

Time -
by Bob Goodwin 29 Aug '18

29 Aug '18

In the past if I wanted to time a process in the darkroom or the kitchen I had a wind up timer, twist the dial to 27 minutes or whatever I wanted and a bell would ring when that time had elapsed. Certainly by today a Fedora computer should be able to do that basic task forme. I would be happy typing a line inxterm that would run aplay some.wav at the end of the period. Can anyone tell me how to do that? Until recently I have used xfce4-timer but that has never been as convenient as I would like and recently I have had problems with it. Any suggestions will be appreciated, Bob -- Bob Goodwin - Zuni, Virginia, USA http://www.qrz.com/db/W2BOD box10 FEDORA-27/64bit LINUX XFCE Fastmail POP3

5 6

directories at the top ??
by ToddAndMargo 29 Aug '18

29 Aug '18

Hi All, Fedora 28, x64 Xfce 4.12 I have noticed lately when opening and saving files, that my folders (directories) are mixed in with my files in alphabetical order. This annoys the snot out of me. Is there a way to tell them to put the folders at the top like it use to do? Many thanks, -T

2 3

Problem w/ Fedora 28 & HP lt4120 WWAN card
by Thomas Portmann 29 Aug '18

29 Aug '18

Hello, I am currently trying to set up Fedora 28 on a HP EliteBook x360 1030 G2 and everything is working quite nicely. My main problem is with the WWAN card (HP lt4120, 03f0:9d1d) which, currently does not seem to work correctly after a cold boot, but which is OK after a warm boot (restart). I suspect a timing issue or some initial configuration that does not get done upon cold boot, but do not know where to start searching. I tried to attach both logs (journalctl) but did not see the mail appear. Here are a few lines which seem significant to me. It seems as if the device gets rediscovered again and again: grep --color=always -i '$modemmanager\|lt4120\|1-5$' wwan_problem.log | head -28 Aug 27 10:56:00 localhost.localdomain kernel: Linux version 4.17.14-202.fc28.x86_64 (mockbuild(a)bkernel01.phx2.fedoraproject.org) (gcc version 8.1.1 20180712 (Red Hat 8.1.1-5) (GCC)) #1 SMP Wed Aug 15 12:29:25 UTC 2018 Aug 27 10:56:01 localhost.localdomain kernel: usb 1-5: new high-speed USB device number 3 using xhci_hcd Aug 27 10:56:01 localhost.localdomain kernel: usb 1-5: New USB device found, idVendor=03f0, idProduct=9d1d, bcdDevice= 2.28 Aug 27 10:56:01 localhost.localdomain kernel: usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 27 10:56:01 localhost.localdomain kernel: usb 1-5: Product: HP lt4120 Snapdragon X5 LTE Aug 27 10:56:01 localhost.localdomain kernel: usb 1-5: Manufacturer: HP Aug 27 10:56:01 localhost.localdomain kernel: usb 1-5: SerialNumber: 0123456789ABCDEF Aug 27 10:56:07 localhost.localdomain kernel: usb 1-5: USB disconnect, device number 3 Aug 27 10:56:12 localhost.localdomain ModemManager[978]: <info> ModemManager (version 1.6.12-3.fc28) starting in system bus... Aug 27 10:56:12 localhost.localdomain audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=ModemManager comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Aug 27 10:56:13 localhost.localdomain NetworkManager[1075]: <info> [1535360173.3092] modem-manager: ModemManager available Aug 27 10:56:17 localhost.localdomain kernel: usb 1-5: new high-speed USB device number 8 using xhci_hcd Aug 27 10:56:17 localhost.localdomain kernel: usb 1-5: New USB device found, idVendor=03f0, idProduct=9d1d, bcdDevice= 2.28 Aug 27 10:56:17 localhost.localdomain kernel: usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 27 10:56:17 localhost.localdomain kernel: usb 1-5: Product: HP lt4120 Snapdragon X5 LTE Aug 27 10:56:17 localhost.localdomain kernel: usb 1-5: Manufacturer: HP Aug 27 10:56:17 localhost.localdomain kernel: usb 1-5: SerialNumber: 0123456789ABCDEF Aug 27 10:56:17 localhost.localdomain mtp-probe[2069]: checking bus 1, device 8: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5" Aug 27 10:56:17 localhost.localdomain systemd[1]: Starting USB_ModeSwitch_1-5... Aug 27 10:56:18 localhost.localdomain kernel: cdc_ether 1-5:2.0 usb0: register 'cdc_ether' at usb-0000:00:14.0-5, CDC Ethernet Device, b6:7f:f9:9f:0b:c9 Aug 27 10:56:18 localhost.localdomain upowerd[1559]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-5 Aug 27 10:56:18 localhost.localdomain upowerd[1559]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:2.1 Aug 27 10:56:18 localhost.localdomain kernel: cdc_ether 1-5:2.0 enp0s20f0u5c2: renamed from usb0 Aug 27 10:56:18 localhost.localdomain upowerd[1559]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:2.0 Aug 27 10:56:18 localhost.localdomain kernel: usb 1-5: USB disconnect, device number 8 Aug 27 10:56:18 localhost.localdomain kernel: cdc_ether 1-5:2.0 enp0s20f0u5c2: unregister 'cdc_ether' usb-0000:00:14.0-5, CDC Ethernet Device Aug 27 10:56:18 localhost.localdomain ModemManager[978]: <info> (net/enp0s20f0u5c2): released by modem /sys/devices/pci0000:00/0000:00:14.0/usb1/1-5 Aug 27 10:56:18 localhost.localdomain ModemManager[978]: <info> Couldn't check support for device at '/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5': Operation was cancelled grep --color=always -i '$modemmanager\|lt4120\|1-5$' wwan_ok.log Aug 27 10:59:22 localhost.localdomain kernel: Linux version 4.17.14-202.fc28.x86_64 (mockbuild(a)bkernel01.phx2.fedoraproject.org) (gcc version 8.1.1 20180712 (Red Hat 8.1.1-5) (GCC)) #1 SMP Wed Aug 15 12:29:25 UTC 2018 Aug 27 10:59:22 localhost.localdomain kernel: usb 1-5: new high-speed USB device number 2 using xhci_hcd Aug 27 10:59:22 localhost.localdomain kernel: usb 1-5: New USB device found, idVendor=03f0, idProduct=9d1d, bcdDevice= 2.28 Aug 27 10:59:22 localhost.localdomain kernel: usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 27 10:59:22 localhost.localdomain kernel: usb 1-5: Product: HP lt4120 Snapdragon X5 LTE Aug 27 10:59:22 localhost.localdomain kernel: usb 1-5: Manufacturer: HP Aug 27 10:59:22 localhost.localdomain kernel: usb 1-5: SerialNumber: 0123456789ABCDEF Aug 27 10:59:30 localhost.localdomain mtp-probe[807]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5" Aug 27 10:59:31 localhost.localdomain kernel: cdc_ether 1-5:2.0 usb0: register 'cdc_ether' at usb-0000:00:14.0-5, CDC Ethernet Device, 02:93:a2:7f:ee:d0 Aug 27 10:59:31 localhost.localdomain kernel: cdc_ether 1-5:2.0 enp0s20f0u5c2: renamed from usb0 Aug 27 10:59:34 localhost.localdomain systemd[1]: Starting USB_ModeSwitch_1-5... Aug 27 10:59:34 localhost.localdomain ModemManager[966]: <info> ModemManager (version 1.6.12-3.fc28) starting in system bus... Aug 27 10:59:35 localhost.localdomain audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=ModemManager comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Aug 27 10:59:35 localhost.localdomain kernel: cdc_ether 1-5:2.0 enp0s20f0u5c2: unregister 'cdc_ether' usb-0000:00:14.0-5, CDC Ethernet Device Aug 27 10:59:35 localhost.localdomain ModemManager[966]: <info> (net/enp0s20f0u5c2): released by modem /sys/devices/pci0000:00/0000:00:14.0/usb1/1-5 Aug 27 10:59:35 localhost.localdomain ModemManager[966]: <info> Couldn't check support for device at '/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5': Operation was cancelled Aug 27 10:59:35 localhost.localdomain NetworkManager[1069]: <info> [1535360375.4856] modem-manager: ModemManager available Aug 27 10:59:35 localhost.localdomain kernel: cdc_mbim 1-5:3.0: cdc-wdm0: USB WDM device Aug 27 10:59:35 localhost.localdomain kernel: cdc_mbim 1-5:3.0 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-5, CDC MBIM, 7a:5b:e0:b1:19:d2 Aug 27 10:59:35 localhost.localdomain kernel: cdc_mbim 1-5:3.0 wwp0s20f0u5c3: renamed from wwan0 Aug 27 10:59:37 localhost.localdomain systemd[1]: Started USB_ModeSwitch_1-5. Aug 27 10:59:37 localhost.localdomain audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=usb_modeswitch@1-5 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Aug 27 10:59:37 localhost.localdomain audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=usb_modeswitch@1-5 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Aug 27 10:59:37 localhost.localdomain ModemManager[966]: opening device... Aug 27 10:59:37 localhost.localdomain ModemManager[966]: cannot connect to proxy: Could not connect: Connection refused Aug 27 10:59:37 localhost.localdomain ModemManager[966]: spawning new mbim-proxy (try 1)... Aug 27 10:59:37 localhost.localdomain ModemManager[1609]: couldn't setup proxy specific process group Aug 27 10:59:37 localhost.localdomain ModemManager[966]: [/dev/cdc-wdm0] Read max control message size from descriptors file: 4096 Aug 27 10:59:37 localhost.localdomain ModemManager[966]: [/dev/cdc-wdm0] channel destroyed Aug 27 10:59:37 localhost.localdomain ModemManager[966]: <info> Creating modem with plugin 'Generic' and '2' ports Aug 27 10:59:37 localhost.localdomain ModemManager[966]: <info> Modem for device at '/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5' successfully created Aug 27 10:59:37 localhost.localdomain ModemManager[966]: opening device... Aug 27 10:59:37 localhost.localdomain ModemManager[966]: [/dev/cdc-wdm0] Read max control message size from descriptors file: 4096 Aug 27 10:59:38 localhost.localdomain ModemManager[966]: <info> Modem: state changed (unknown -> disabled) Aug 27 10:59:38 localhost.localdomain ModemManager[966]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (disabled -> enabling) Aug 27 10:59:38 localhost.localdomain ModemManager[966]: <info> Simple connect started... Aug 27 10:59:38 localhost.localdomain ModemManager[966]: <info> Simple connect state (4/8): Wait to get fully enabled Aug 27 10:59:38 localhost.localdomain ModemManager[966]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (unknown -> registering) Aug 27 10:59:38 localhost.localdomain ModemManager[966]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (registering -> home) Aug 27 10:59:39 localhost.localdomain ModemManager[966]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (enabling -> registered) Aug 27 10:59:39 localhost.localdomain ModemManager[966]: <info> Simple connect state (5/8): Register Aug 27 10:59:39 localhost.localdomain ModemManager[966]: <info> Simple connect state (6/8): Bearer Aug 27 10:59:39 localhost.localdomain ModemManager[966]: <info> Simple connect state (7/8): Connect Aug 27 10:59:39 localhost.localdomain ModemManager[966]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (registered -> connecting) Aug 27 10:59:39 localhost.localdomain geoclue[1660]: Failed to set GPS refresh rate: GDBus.Error:org.freedesktop.ModemManager1.Error.Core.Unsupported: Cannot set GPS refresh rate: GPS not supported Aug 27 10:59:39 localhost.localdomain ModemManager[966]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (connecting -> connected) Aug 27 10:59:39 localhost.localdomain ModemManager[966]: <info> Simple connect state (8/8): All done Aug 27 10:59:52 localhost.localdomain ModemManager[966]: <info> Creating modem with plugin 'Generic' and '1' ports Aug 27 10:59:52 localhost.localdomain ModemManager[966]: <warn> Could not grab port (tty/ttyS4): 'Cannot add port 'tty/ttyS4', unhandled serial type' Aug 27 10:59:52 localhost.localdomain ModemManager[966]: <warn> Couldn't create modem for device at '/sys/devices/pci0000:00/0000:00:16.3': Failed to find primary AT port Does anybody have any idea on how I could correct this? Thank you in advance and best regards Tom

1 0

NetworkManager, Avahi, WiFi v Wired priority
by Chris Murphy 28 Aug '18

28 Aug '18

Hi, Summary: What I want is, for a Fedora 28 Server (Intel NUC) to always prefer using wired connection if available, and fallback on wifi; not just for outgoing connections but also when I do 'ssh chris(a)f28s.local'. There is one AP/router that serves both wired and wireless connections and both server and workstation. Out of the box this doesn't happen. So first questions are: should it work out of the box? can it be made to work? and if so what do I need to modify to make it work as described? What I've learned so far: 1. nmclic c show <connection uuid> connection.autoconnect-priority should be higher on the preferred connection. https://developer.gnome.org/NetworkManager/stable/nm-settings.html So I've picked a value of 1 for wired and 0 for wifi. That should mean if I make an outgoing connection, it should always prefer wired. And yet 'netstat -natp' shows this is not true, sometimes it's using the wired path sometimes the wireless path, and I can't tell what the pattern is. If any. 2. If I 'scp <fileonworkstation> chris@f28s.local:/tmp' I more often than not get clearly wifi speeds (and a connection check confirms it's using the wifi ip), but sometimes it's wired. Again, I can't figure out the pattern. 3. If I disconnect the wired connection, yes everything is deterministically wifi haha. But if I connect wired back in, the first X connections (or maybe it's Y time) are always only wifi and not wired. If I restart avahi manually, it becomes wired. Sooooo that means avahi might be playing a role here, it has no way of defining preferred connection though that I can tell. But I don't know anything about multicast and whether it can specify more than one address for a host name, and with preference based on the NetworkManager connection priority? Thanks, -- Chris Murphy

4 3

tmux and powerline, unwanted info and error messages
by Chris Murphy 27 Aug '18

27 Aug '18

Hi, screenshot: https://drive.google.com/open?id=1eEPFeHD-85CTarZbUwewMEJoQ23fNo8G I'm seeing this garbage spit out for some reason I don't understand. The setups is: Fedora 28 Workstation, GNOME Terminal accessing a remote Fedora 28 Server. This spew only just started after making the otherwise neat changes listed here: https://fedoramagazine.org/4-tips-better-tmux-sessions/ https://fedoramagazine.org/add-power-terminal-powerline/ Specifically in order I did (all on the Server): 1. Modify ~/.bash_profile file: if [ -z "$TMUX" ]; then tmux attach -t default || tmux new -s default fi 2. sudo dnf install tmux-powerline 3. Modify ~/.bashrc file: if [ -f `which powerline-daemon` ]; then powerline-daemon -q POWERLINE_BASH_CONTINUATION=1 POWERLINE_BASH_SELECT=1 . /usr/share/powerline/bash/powerline.sh fi 4. Modify ~/.tmux.conf file: source "/usr/share/tmux/powerline.conf" I've gone through one page of issues https://github.com/powerline/powerline/issues and haven't found anything related off hand; maybe it's a bug but I'm not sure even how I'd file the bug. -- Chris Murphy

3 6

log spam : i2c_hid_get_input: incomplete report
by sean darcy 27 Aug '18

27 Aug '18

20+ times per _second_ syslog has: i2c_hid i2c-ELAN0501:01: i2c_hid_get_input: incomplete report (14/65535) It makes it impossible to use journalctl. How do I get rid of this ? sean

2 5

Rstudio
by Javier Perez 27 Aug '18

27 Aug '18

Fedora 28. Why is Rstudio 0.99.467 ? When I start it Rstudio tells me that there is a newer 1.1.456 Just wondering. -- ------------------------------ /\_/\ |O O| pepebuho(a)gmail.com ~~~~ Javier Perez ~~~~ While the night runs ~~~~ toward the day... m m Pepebuho watches from his high perch.

2 1

← Newer
1
2
3
4
5
6
7
8
9
Older →