users July 2019

users@lists.fedoraproject.org

101 participants
98 discussions

Evolution crashing
by Robin Lee 28 Jul '19

28 Jul '19

Hi I wonder if just for me that Evolution crashes most of the time I try to close it? I usually start Evolution right away after logging in and then have it running until it is time to apply software updates. I usually do that twice a week. More than half of time closing Evolution crashes the whole Gnome desktop. Quite annoying. Sometimes it closes gracefully. Is it just me? Cheers Robin

5 10

Samba broken pipe -
by Bob Goodwin 27 Jul '19

27 Jul '19

. This morning I am unable to ssh into the samba server. I get an error: "client_loop: send disconnect: Broken pipe" although I am still able to access the server files on another connection. Has something changed recently limiting me to one connection at a time? Or perhaps another problem? Bob -- Bob Goodwin - Zuni, Virginia, USA http://www.qrz.com/db/W2BOD box83 FEDORA-30/64bit LINUX XFCE Fastmail POP3

5 10

Equalizer for pulseaudio
by SternData 27 Jul '19

27 Jul '19

I just did a clean install of F30 on this system and am trying to get things back to work. I've got pulseeffects installed because the install of pulseaudio-equalizer fails $ sudo dnf install pulseaudio-equalizer Error: Problem: conflicting requests - nothing provides ladspa-swh-plugins needed by pulseaudio-equalizer-2.7-21.fc29.noarch (try to add '--skip-broken' to skip uninstallable packages) This is what's available searching on ladspa ========================== Summary Matched: ladspa ============================ lv2-swh-plugins.x86_64 : LV2 ports of LADSPA swh plugins zam-plugins.x86_64 : A collection of LV2/LADSPA/JACK audio plugins zam-plugins.x86_64 : A collection of LV2/LADSPA/JACK audio plugins jack-rack.x86_64 : Stereo LADSPA effects rack for the JACK audio API lv2-zam-plugins.x86_64 : A collection of LV2/LADSPA/JACK audio plugins. LV2 : version lv2-zam-plugins.x86_64 : A collection of LV2/LADSPA/JACK audio plugins. LV2 : version liblrdf.i686 : Library for manipulating RDF files describing LADSPA plugins liblrdf.x86_64 : Library for manipulating RDF files describing LADSPA plugins liblrdf-devel.i686 : Library for manipulating RDF files describing LADSPA : plugins liblrdf-devel.x86_64 : Library for manipulating RDF files describing LADSPA : plugins -- -- Steve

3 2

Graphic tablets recommendations?
by S P Arif Sahari Wibowo 26 Jul '19

26 Jul '19

Hi! I am looking for drawing / graphic tablets that works well with Linux, specifically Fedora, and not expensive. So far I am looking into some models: - Parblo A640 - GAOMON S620 - VEIKK S640 - XP-Pen StarG640 - Huion H640P Any thought? Thanks! -- ____ ____ ____ ____ (stephan paul) Arif Sahari Wibowo /___ /___/ /___/ /___ http://www.arifsaha.com/ ____/ / / / ____/

3 6

Suspend Failure xhci_hcd Device
by Dr. Zenzic 25 Jul '19

25 Jul '19

I'm running F30 on a Thinkpad A485 with a Ryzen R5 2500U but having trouble suspending the device. I know it's an issue with the USB 3 hub (xhci device 0000:06:00.4) as seen from dmesg below. The device is failing to suspend for some reason. After this message there are warnings about irq_startup associated with this same device so that may be the issue. > [ 86.338687] PM: suspend entry (deep) > [ 86.338688] PM: Syncing filesystems ... done. > [ 86.348213] Freezing user space processes ... (elapsed 0.002 > seconds) done. > [ 86.350854] OOM killer disabled. > [ 86.350855] Freezing remaining freezable tasks ... (elapsed 0.001 > seconds) done. > [ 86.352112] printk: Suspending console(s) (use no_console_suspend > to debug) > [ 86.352615] wlp2s0: deauthenticating from MACADDRESS by local > choice (Reason: 3=DEAUTH_LEAVING) > [ 86.352655] thinkpad_acpi: acpi_evalf(GTRW, dd, ...) failed: > AE_NOT_FOUND > [ 86.352656] thinkpad_acpi: Cannot read adaptive keyboard mode. > [ 86.594743] xhci_hcd 0000:06:00.4: WARN: xHC CMD_RUN timeout > [ 86.609822] PM: suspend_common(): xhci_pci_suspend+0x0/0xd0 returns > -110 > [ 86.609826] PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 > [ 86.609832] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x120 > returns -110 > [ 86.609835] PM: Device 0000:06:00.4 failed to suspend async: error -110 I've tried disabling wakeup from the specified device in /proc/acpi/wakeup. This has allowed me to enter suspend correctly once but doesn't work consistently. > GPP0 S3 *enabled pci:0000:00:01.1 > GPP1 S3 *disabled pci:0000:00:01.2 > GPP2 S3 *enabled pci:0000:00:01.3 > GPP3 S3 *enabled pci:0000:00:01.4 > GPP4 S3 *disabled > L850 S3 *disabled > GPP5 S3 *enabled pci:0000:00:01.6 > GPP6 S3 *disabled > GP17 S3 *enabled pci:0000:00:08.1 > XHC0 S3 *disabled pci:0000:06:00.3 > XHC1 S3 *disabled pci:0000:06:00.4 > GP18 S3 *enabled pci:0000:00:08.2 > LID S3 *enabled platform:PNP0C0D:00 > SLPB S3 *enabled platform:PNP0C0E:00 Searching on Google I've only found information from kernel lists about needed usb3 slow suspend enabled but that appeared resolved on the kernel side or adding SUSPEND_MODULE="xhci_hcd" to no avail. Has anyone experienced this issue before or know where I should be looking further? Perhaps suspend just isn't working correctly with this Thinkpad model on the current kernel? The full dmesg is attached if that is helpful. Regards.

1 0

Re: Is Fedora 30 able to support Intel Core i9-9980XE Extreme Edition or AMD Ryzen 9 3950X?
by Chris Murphy 25 Jul '19

25 Jul '19

CONFIG_NR_CPUS=1024 for Fedora kernels since a while, I'm not sure how long.

2 1

dnf upgrade with Virtualbox system dumps to grub limited?
by Michael D. Setzer II 25 Jul '19

25 Jul '19

Had an i386 Virtual Box setup that was running Fedora 28. Did the upgrade from the 28 to 30 using the dnf update process, and it seemed to run just fine. Downloaded all the files, and then did the reboot. Watched it do all the updates, cleanups, and verify, and then the reboot after the process completed. No errors, but the reboot then dumped to the grub prompt with lines show hd0 and two other hdo/msdos items. ls resulted in no files be listed. I've done this kind of upgrade in past, but always a single version, but perhaps going from 28 to 30 was too much. Had backed up the 28 vdi file, so just restored it. I then created a new virtual box from the fedora 30 iso, and it installed fine, but have a lot of manual customization to get it to the same level as the previous Fedora 28. Don't know if an update to 29, would have worked? Updated 3 other real systems from 28 to 29, with no issues, so not sure what issue might be. Really Glad I had backup of the vdi. Thanks. +------------------------------------------------------------+ Michael D. Setzer II - Computer Science Instructor (Retired) mailto:mikes@guam.net mailto:msetzerii@gmail.com Guam - Where America's Day Begins G4L Disk Imaging Project maintainer http://sourceforge.net/projects/g4l/ +------------------------------------------------------------+ http://setiathome.berkeley.edu (Original) Number of Seti Units Returned: 19,471 Processing time: 32 years, 290 days, 12 hours, 58 minutes (Total Hours: 287,489) BOINC@HOME CREDITS ROSETTA 66311323.990119 | ABC 16613838.513356 SETI 109804121.703177 | EINSTEIN 141859222.999240

1 0

Why my message is blocked because contains a strange word
by Dario Lesca 25 Jul '19

25 Jul '19

My message do not contain the indicated (with spaces) worldWhy it's blocked ?Thank for replyDario--------------------------------------- Your mail to 'users(a)lists.fedoraproject.org' with the subject Fedora 30: vpnc connection problem Is being held until the list moderator can review it for approval. The message is being held because: Message contains "a d m i n i s t r i v i a" (without space) Either the message will get posted to the list, or you will receivenotification of the moderator's decision. -- Dario Lesca (inviato dal mio Linux Fedora 30 Workstation) -- Dario Lesca (inviato dal mio Linux Fedora 30 Workstation)

4 6

Any interest in openrazer for Fedora?
by Fast OS 24 Jul '19

24 Jul '19

An entirely open source driver and user-space daemon that allows you to manage your Razer peripherals on GNU/Linux. Is available on opensuse build service and is already in the Debian repositories https://openrazer.github.io/

1 0

F30 kernel installation installs only initramfs and /lib/modules/<newversion>
by Felix Miata 24 Jul '19

24 Jul '19

Regular file content of /boot/ after most recent dnf upgrade (host fi965): -rw-r--r-- 1 201358 Mar 14 11:29 config-4.20.16-200.fc29.x86_64 -rw-r--r-- 1 202392 May 20 12:02 config-5.0.17-200.fc29.x86_64 -rw------- 1 43132771 Jul 24 15:57 initramfs-0-rescue-11352b14084942c18a21a5586db0b5b3.img -rw------- 1 16265498 Mar 21 03:37 initramfs-4.20.16-200.fc29.x86_64.img -rw------- 1 16252582 May 28 01:09 initramfs-5.0.17-200.fc29.x86_64.img -rw------- 1 16578784 Jul 24 15:57 initramfs-5.1.18-300.fc30.x86_64.img -rw------- 1 4112263 Mar 14 11:29 System.map-4.20.16-200.fc29.x86_64 -rw------- 1 4172343 May 20 12:02 System.map-5.0.17-200.fc29.x86_64 -rwxr-xr-x 1 8995528 Jul 24 15:57 vmlinuz-0-rescue-11352b14084942c18a21a5586db0b5b3 -rwxr-xr-x 1 8753352 Mar 14 11:31 vmlinuz-4.20.16-200.fc29.x86_64 -rwxr-xr-x 1 8876232 May 20 12:02 vmlinuz-5.0.17-200.fc29.x86_64 Previous upgrade was a dnf system-upgrade from F29 about 8 weeks ago. This isn't the first time this has happened on any of my now F30 installations, but it's now happened enough to be annoying. Does it happen to others? Is it a known bug? -- Evolution as taught in public schools is religion, not science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/

1 0

← Newer
1
2
3
4
5
6
7
8
9
10
Older →