I do understand that robots are not allowed. In my current situation, I would NEED to be able to download all the Packages, save them all on a thumb drive, and make yum use that as the repo, to fix my problems with a non-networked machined.
On 01/14/2018 12:31 PM, JD wrote:
In my current situation, I would NEED to be able to download all the Packages, save them all on a thumb drive, and make yum use that as the repo, to fix my problems with a non-networked machined.
The first hit from a Google search for "fedora repo on usb" is: https://ask.fedoraproject.org/en/question/29254/cache-all-the-content-of-fed...
Does that do what you want?
On 01/14/2018 10:52 AM, David King wrote:
On 01/14/2018 12:31 PM, JD wrote:
In my current situation, I would NEED to be able to download all the Packages, save them all on a thumb drive, and make yum use that as the repo, to fix my problems with a non-networked machined.
The first hit from a Google search for "fedora repo on usb" is: https://ask.fedoraproject.org/en/question/29254/cache-all-the-content-of-fed...
Does that do what you want?
Sorry to say: No :( because I do not have my f27 new install on-line. It's wifi does not work as is because f27 does not include the drivers and the firmware for it's wifi Broadcom chipset. So there is no way.
Also, reposync will sync the OS version of the running OS. My networked machine runs an old fedora, so cannot sync up with f27.
If there is a way to do that, I would love to know the incantation.
Cheers,
JD
Have you considered using wget?.
On Sun, Jan 14, 2018 at 10:29 AM, JD jd1008@gmail.com wrote:
On 01/14/2018 10:52 AM, David King wrote:
On 01/14/2018 12:31 PM, JD wrote:
In my current situation, I would NEED to be able to download all the Packages, save them all on a thumb drive, and make yum use that as the repo, to fix my problems with a non-networked machined.
The first hit from a Google search for "fedora repo on usb" is: https://ask.fedoraproject.org/en/question/29254/cache-all-th e-content-of-fedora-repo-to-a-usb-key/
Does that do what you want?
Sorry to say: No :(
because I do not have my f27 new install on-line. It's wifi does not work as is because f27 does not include the drivers and the firmware for it's wifi Broadcom chipset. So there is no way.
Also, reposync will sync the OS version of the running OS. My networked machine runs an old fedora, so cannot sync up with f27.
If there is a way to do that, I would love to know the incantation.
Cheers,
JD
users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org
On 01/14/2018 01:32 PM, Kam Leo wrote:
Have you considered using wget?.
On Sun, Jan 14, 2018 at 10:29 AM, JD <jd1008@gmail.com mailto:jd1008@gmail.com> wrote:
On 01/14/2018 10:52 AM, David King wrote: On 01/14/2018 12:31 PM, JD wrote: In my current situation, I would NEED to be able to download all the Packages, save them all on a thumb drive, and make yum use that as the repo, to fix my problems with a non-networked machined. The first hit from a Google search for "fedora repo on usb" is: https://ask.fedoraproject.org/en/question/29254/cache-all-the-content-of-fedora-repo-to-a-usb-key/ <https://ask.fedoraproject.org/en/question/29254/cache-all-the-content-of-fedora-repo-to-a-usb-key/> Does that do what you want? Sorry to say: No :( because I do not have my f27 new install on-line. It's wifi does not work as is because f27 does not include the drivers and the firmware for it's wifi Broadcom chipset. So there is no way. Also, reposync will sync the OS version of the running OS. My networked machine runs an old fedora, so cannot sync up with f27. If there is a way to do that, I would love to know the incantation. Cheers, JD
Not allowed - robots denied.
El 14/1/18 a las 21:40, JD escribió:
On 01/14/2018 01:32 PM, Kam Leo wrote:
Have you considered using wget?.
On Sun, Jan 14, 2018 at 10:29 AM, JD <jd1008@gmail.com mailto:jd1008@gmail.com> wrote:
On 01/14/2018 10:52 AM, David King wrote:
On 01/14/2018 12:31 PM, JD wrote:
In my current situation, I would NEED to be able to download all the Packages, save them all on a thumb drive, and make yum use that as the repo, to fix my problems with a non-networked machined.
The first hit from a Google search for "fedora repo on usb" is: https://ask.fedoraproject.org/en/question/29254/cache-all-the-content-of-fed... https://ask.fedoraproject.org/en/question/29254/cache-all-the-content-of-fedora-repo-to-a-usb-key/
Does that do what you want?
Sorry to say: No :( because I do not have my f27 new install on-line. It's wifi does not work as is because f27 does not include the drivers and the firmware for it's wifi Broadcom chipset. So there is no way.
Also, reposync will sync the OS version of the running OS. My networked machine runs an old fedora, so cannot sync up with f27.
If there is a way to do that, I would love to know the incantation.
Cheers,
JD
Not allowed - robots denied.
Hello
rsync as used here? https://linuxconfig.org/creating-a-package-repository-on-linux-fedora-and-de...
(Not tried)
Best,
On 01/14/2018 01:58 PM, Jose Maria Terry Jimenez wrote:
El 14/1/18 a las 21:40, JD escribió:
On 01/14/2018 01:32 PM, Kam Leo wrote:
Have you considered using wget?.
On Sun, Jan 14, 2018 at 10:29 AM, JD <jd1008@gmail.com mailto:jd1008@gmail.com> wrote:
On 01/14/2018 10:52 AM, David King wrote: On 01/14/2018 12:31 PM, JD wrote: In my current situation, I would NEED to be able to download all the Packages, save them all on a thumb drive, and make yum use that as the repo, to fix my problems with a non-networked machined. The first hit from a Google search for "fedora repo on usb" is:https://ask.fedoraproject.org/en/question/29254/cache-all-the-content-of-fed...
https://ask.fedoraproject.org/en/question/29254/cache-all-the-content-of-fedora-repo-to-a-usb-key/
Does that do what you want? Sorry to say: No :( because I do not have my f27 new install on-line. It's wifi does not work as is because f27 does not include the drivers and the firmware for it's wifi Broadcom chipset. So there is no way. Also, reposync will sync the OS version of the running OS. My networked machine runs an old fedora, so cannot sync up with f27. If there is a way to do that, I would love to know the incantation. Cheers, JDNot allowed - robots denied.
Hello
rsync as used here? https://linuxconfig.org/creating-a-package-repository-on-linux-fedora-and-de...
(Not tried)
Best,
rsync requires you to register with an account. I really DO NOT want to be a mirror, and it is not so straight-forward how to limit the mirroring to just the directory Packages of a certain release and architecture.
On 01/15/18 01:31, JD wrote:
I do understand that robots are not allowed. In my current situation, I would NEED to be able to download all the Packages, save them all on a thumb drive, and make yum use that as the repo, to fix my problems with a non-networked machined.
"Everything" ?
I don't know why you're making things so difficult.
On a system with a functional internet connection you can find out what packages are needed to install the broadcom-wl package from RPMfusion in one of 2 ways.
Way One
1. In a Virtual Machine boot the Live-OS of the spin installed on the laptop. 2. Install the RPMfusion repos to the Live-OS. 3. Issue the command dnf --downloadonly --downloaddir=/tmp install broadcom-wl 4. Transfer the downloaded rpm file to external media 5. Make sure that "kernel" packages downloaded match the kernel version on the laptop and if not download those from koji.
Way Two
1. Do the exact same as above but after installing the Live-OS in a VM
Way Three
1. Boot the Live-OS on bare metal and do the same as above
On 01/15/18 05:00, Ed Greshko wrote:
On 01/15/18 01:31, JD wrote:
I do understand that robots are not allowed. In my current situation, I would NEED to be able to download all the Packages, save them all on a thumb drive, and make yum use that as the repo, to fix my problems with a non-networked machined.
"Everything" ?
I don't know why you're making things so difficult.
On a system with a functional internet connection you can find out what packages are needed to install the broadcom-wl package from RPMfusion in one of 2 ways.
Way One
1. In a Virtual Machine boot the Live-OS of the spin installed on the laptop. 2. Install the RPMfusion repos to the Live-OS. 3. Issue the command dnf --downloadonly --downloaddir=/tmp install broadcom-wl 4. Transfer the downloaded rpm file to external media 5. Make sure that "kernel" packages downloaded match the kernel version on the laptop and if not download those from koji.
Way Two
1. Do the exact same as above but after installing the Live-OS in a VM
Way Three
1. Boot the Live-OS on bare metal and do the same as above
I did this from a Live-KDE spin ....
[root@localhost-live ~]# which wget /usr/bin/which: no wget in (/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/root/bin) [root@localhost-live ~]# dnf install wget Fedora 27 - x86_64 - Updates 2.5 MB/s | 16 MB 00:06 Fedora 27 - x86_64 4.6 MB/s | 58 MB 00:12 Last metadata expiration check: 0:00:09 ago on Sun 14 Jan 2018 04:14:49 PM EST. Dependencies resolved. =================================================================================== Package Arch Version Repository Size =================================================================================== Installing: wget x86_64 1.19.2-2.fc27 updates 732 k
Transaction Summary =================================================================================== Install 1 Package
Total download size: 732 k Installed size: 2.8 M Is this ok [y/N]: y Downloading Packages: wget-1.19.2-2.fc27.x86_64.rpm 1.1 MB/s | 732 kB 00:00 ----------------------------------------------------------------------------------- Total 492 kB/s | 732 kB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : wget-1.19.2-2.fc27.x86_64 1/1 Running scriptlet: wget-1.19.2-2.fc27.x86_64 1/1 Verifying : wget-1.19.2-2.fc27.x86_64 1/1
Installed: wget.x86_64 1.19.2-2.fc27
Complete! [root@localhost-live ~]# wget https://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-27.noarch... --2018-01-14 16:15:59-- https://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-27.noarch... Resolving download1.rpmfusion.org (download1.rpmfusion.org)... 193.28.235.60 Connecting to download1.rpmfusion.org (download1.rpmfusion.org)|193.28.235.60|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 20732 (20K) [application/x-rpm] Saving to: ‘rpmfusion-free-release-27.noarch.rpm’
rpmfusion-free-relea 100%[=====================>] 20.25K 71.7KB/s in 0.3s
2018-01-14 16:16:01 (71.7 KB/s) - ‘rpmfusion-free-release-27.noarch.rpm’ saved [20732/20732]
[root@localhost-live ~]# wget https://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-27.... --2018-01-14 16:16:12-- https://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-27.... Resolving download1.rpmfusion.org (download1.rpmfusion.org)... 193.28.235.60 Connecting to download1.rpmfusion.org (download1.rpmfusion.org)|193.28.235.60|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 20580 (20K) [application/x-rpm] Saving to: ‘rpmfusion-nonfree-release-27.noarch.rpm’
rpmfusion-nonfree-re 100%[=====================>] 20.10K 75.6KB/s in 0.3s
2018-01-14 16:16:13 (75.6 KB/s) - ‘rpmfusion-nonfree-release-27.noarch.rpm’ saved [20580/20580]
[root@localhost-live ~]# dnf install ./*rpm Last metadata expiration check: 0:01:38 ago on Sun 14 Jan 2018 04:14:49 PM EST. Dependencies resolved. =================================================================================== Package Arch Version Repository Size =================================================================================== Installing: rpmfusion-free-release noarch 27-1 @commandline 20 k rpmfusion-nonfree-release noarch 27-1 @commandline 20 k
Transaction Summary =================================================================================== Install 2 Packages
Total size: 40 k Installed size: 18 k Is this ok [y/N]: y Downloading Packages: Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : rpmfusion-nonfree-release-27-1.noarch 1/2 Installing : rpmfusion-free-release-27-1.noarch 2/2 Verifying : rpmfusion-free-release-27-1.noarch 1/2 Verifying : rpmfusion-nonfree-release-27-1.noarch 2/2
Installed: rpmfusion-free-release.noarch 27-1 rpmfusion-nonfree-release.noarch 27-1
Complete! [root@localhost-live ~]# dnf --downloadonly --downloaddir=/tmp install broadcom-wl RPM Fusion for Fedora 27 - Free - Updates 962 kB/s | 253 kB 00:00 RPM Fusion for Fedora 27 - Free 5.2 MB/s | 717 kB 00:00 RPM Fusion for Fedora 27 - Nonfree - Updates 695 kB/s | 18 kB 00:00 RPM Fusion for Fedora 27 - Nonfree 2.9 MB/s | 163 kB 00:00 Last metadata expiration check: 0:00:00 ago on Sun 14 Jan 2018 04:17:11 PM EST. Dependencies resolved. =================================================================================== Package Arch Version Repository Size =================================================================================== Installing: broadcom-wl noarch 6.30.223.271-3.fc27 rpmfusion-nonfree 24 k Installing dependencies: akmod-wl x86_64 6.30.223.271-15.fc27 rpmfusion-nonfree-updates 5.5 M akmods noarch 0.5.6-10.fc27 fedora 23 k binutils x86_64 2.29-6.fc27 fedora 5.9 M cmake-rpm-macros noarch 3.10.1-4.fc27 updates 36 k cpp x86_64 7.2.1-2.fc27 fedora 9.2 M dwz x86_64 0.12-5.fc27 fedora 106 k elfutils-libelf-devel x86_64 0.170-1.fc27 fedora 46 k fakeroot x86_64 1.22-1.fc27 fedora 102 k fakeroot-libs x86_64 1.22-1.fc27 fedora 38 k fedora-rpm-macros noarch 26-3.fc27 fedora 6.7 k fpc-srpm-macros noarch 1.1-3.fc27 fedora 7.1 k gcc x86_64 7.2.1-2.fc27 fedora 21 M ghc-srpm-macros noarch 1.4.2-6.fc27 fedora 7.9 k glibc-devel x86_64 2.26-15.fc27 fedora 985 k glibc-headers x86_64 2.26-15.fc27 fedora 500 k gnat-srpm-macros noarch 4-4.fc27 fedora 8.4 k go-srpm-macros noarch 2-10.fc27 fedora 8.0 k isl x86_64 0.16.1-3.fc27 fedora 835 k kernel-devel x86_64 4.14.13-300.fc27 updates 12 M kernel-headers x86_64 4.14.13-300.fc27 updates 1.2 M kmodtool noarch 1-25.fc27 fedora 16 k libmpc x86_64 1.0.2-8.fc27 fedora 56 k ocaml-srpm-macros noarch 5-2.fc27 fedora 7.8 k openblas-srpm-macros noarch 2-2.fc27 fedora 6.6 k patch x86_64 2.7.5-6.fc27 fedora 123 k perl-srpm-macros noarch 1-24.fc27 fedora 9.3 k python-srpm-macros noarch 3-23.fc27 updates 9.7 k qt5-srpm-macros noarch 5.9.1-2.fc27 fedora 8.5 k redhat-rpm-config noarch 67-2.fc27 updates 62 k rpm-build x86_64 4.14.0-2.fc27 fedora 160 k rpmdevtools noarch 8.10-3.fc27 fedora 105 k rust-srpm-macros noarch 4-3.fc27 fedora 7.7 k xemacs-filesystem noarch 21.5.34-25.20170628hg97140cfdeca7.fc27 fedora 21 k zlib-devel x86_64 1.2.11-4.fc27 fedora 56 k zstd x86_64 1.3.3-1.fc27 updates 306 k
Transaction Summary =================================================================================== Install 36 Packages
Total download size: 58 M Installed size: 162 M DNF will only download packages for the transaction. Is this ok [y/N]:
On 01/15/18 05:19, Ed Greshko wrote:
kernel-devel x86_64 4.14.13-300.fc27 updates 12 M kernel-headers x86_64 4.14.13-300.fc27 updates 1.2 M
Note these packages are from updates. If the laptop system hasn't been updated one can use....
dnf --disablerepo updates --downloadonly --downloaddir=/tmp install broadcom-wl
to get....
kernel-devel x86_64 4.13.9-300.fc27 fedora 11 M kernel-headers x86_64 4.13.9-300.fc27 fedora 1.2 M
On 01/14/2018 02:22 PM, Ed Greshko wrote:
On 01/15/18 05:19, Ed Greshko wrote:
kernel-devel x86_64 4.14.13-300.fc27 updates 12 M kernel-headers x86_64 4.14.13-300.fc27 updates 1.2 M
Note these packages are from updates. If the laptop system hasn't been updated one can use....
dnf --disablerepo updates --downloadonly --downloaddir=/tmp install broadcom-wl
to get....
kernel-devel x86_64 4.13.9-300.fc27 fedora 11 M kernel-headers x86_64 4.13.9-300.fc27 fedora 1.2 M
When doing the --downloadonly, how do I disable the dependencies, since they are NOT crucial to networking the fc27 machine?
Can't you mount an install iso and use it as a local repo?
On Mon, Jan 22, 2018 at 2:14 PM, JD jd1008@gmail.com wrote:
On 01/14/2018 02:22 PM, Ed Greshko wrote:
On 01/15/18 05:19, Ed Greshko wrote:
kernel-devel x86_64 4.14.13-300.fc27 updates 12 M kernel-headers x86_64 4.14.13-300.fc27 updates 1.2 M
Note these packages are from updates. If the laptop system hasn't been updated one can use....
dnf --disablerepo updates --downloadonly --downloaddir=/tmp install broadcom-wl
to get....
kernel-devel x86_64 4.13.9-300.fc27 fedora 11 M kernel-headers x86_64 4.13.9-300.fc27 fedora 1.2 M
When doing the --downloadonly,
how do I disable the dependencies, since they are NOT crucial to networking the fc27 machine? _______________________________________________ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org
Sigh!!! Well, yes ... I will give it a shot.
On 01/22/2018 12:21 PM, Terry Polzin wrote:
Can't you mount an install iso and use it as a local repo?
On Mon, Jan 22, 2018 at 2:14 PM, JD <jd1008@gmail.com mailto:jd1008@gmail.com> wrote:
On 01/14/2018 02:22 PM, Ed Greshko wrote: On 01/15/18 05:19, Ed Greshko wrote: kernel-devel x86_64 4.14.13-300.fc27 updates 12 M kernel-headers x86_64 4.14.13-300.fc27 updates 1.2 M Note these packages are from updates. If the laptop system hasn't been updated one can use.... dnf --disablerepo updates --downloadonly --downloaddir=/tmp install broadcom-wl to get.... kernel-devel x86_64 4.13.9-300.fc27 fedora 11 M kernel-headers x86_64 4.13.9-300.fc27 fedora 1.2 M When doing the --downloadonly, how do I disable the dependencies, since they are NOT crucial to networking the fc27 machine? _______________________________________________ users mailing list -- users@lists.fedoraproject.org <mailto:users@lists.fedoraproject.org> To unsubscribe send an email to users-leave@lists.fedoraproject.org <mailto:users-leave@lists.fedoraproject.org>
users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org
Terry, have you looked inside F27 workstation install iso? Please take a look, and tell me if the release packages are ALL there.
On Mon, Jan 22, 2018 at 7:21 PM, Terry Polzin foxec208@gmail.com wrote:
Can't you mount an install iso and use it as a local repo?
On Mon, Jan 22, 2018 at 2:14 PM, JD jd1008@gmail.com wrote:
On 01/14/2018 02:22 PM, Ed Greshko wrote:
On 01/15/18 05:19, Ed Greshko wrote:
kernel-devel x86_64 4.14.13-300.fc27 updates 12 M kernel-headers x86_64 4.14.13-300.fc27 updates 1.2 M
Note these packages are from updates. If the laptop system hasn't been updated one can use....
dnf --disablerepo updates --downloadonly --downloaddir=/tmp install broadcom-wl
to get....
kernel-devel x86_64 4.13.9-300.fc27 fedora 11 M kernel-headers x86_64 4.13.9-300.fc27 fedora 1.2 M
When doing the --downloadonly,
how do I disable the dependencies, since they are NOT crucial to networking the fc27 machine? _______________________________________________ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org
users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org
On 01/24/18 05:24, JD wrote:
Terry, have you looked inside F27 workstation install iso? Please take a look, and tell me if the release packages are ALL there.
Packages such as "kernel-devel" and "kernel-headers" are not on the LiveOS ISO.
On Mon, Jan 22, 2018 at 7:21 PM, Terry Polzin <foxec208@gmail.com mailto:foxec208@gmail.com> wrote:
Can't you mount an install iso and use it as a local repo? On Mon, Jan 22, 2018 at 2:14 PM, JD <jd1008@gmail.com <mailto:jd1008@gmail.com>> wrote: On 01/14/2018 02:22 PM, Ed Greshko wrote: On 01/15/18 05:19, Ed Greshko wrote: kernel-devel x86_64 4.14.13-300.fc27 updates 12 M kernel-headers x86_64 4.14.13-300.fc27 updates 1.2 M Note these packages are from updates. If the laptop system hasn't been updated one can use.... dnf --disablerepo updates --downloadonly --downloaddir=/tmp install broadcom-wl to get.... kernel-devel x86_64 4.13.9-300.fc27 fedora 11 M kernel-headers x86_64 4.13.9-300.fc27 fedora 1.2 M When doing the --downloadonly, how do I disable the dependencies, since they are NOT crucial to networking the fc27 machine? _______________________________________________ users mailing list -- users@lists.fedoraproject.org <mailto:users@lists.fedoraproject.org> To unsubscribe send an email to users-leave@lists.fedoraproject.org <mailto:users-leave@lists.fedoraproject.org> _______________________________________________ users mailing list -- users@lists.fedoraproject.org <mailto:users@lists.fedoraproject.org> To unsubscribe send an email to users-leave@lists.fedoraproject.org <mailto:users-leave@lists.fedoraproject.org>
users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org
On 01/23/18 03:14, JD wrote:
On 01/14/2018 02:22 PM, Ed Greshko wrote:
On 01/15/18 05:19, Ed Greshko wrote:
kernel-devel x86_64 4.14.13-300.fc27 updates 12 M kernel-headers x86_64 4.14.13-300.fc27 updates 1.2 M
Note these packages are from updates. If the laptop system hasn't been updated one can use....
dnf --disablerepo updates --downloadonly --downloaddir=/tmp install broadcom-wl
to get....
kernel-devel x86_64 4.13.9-300.fc27 fedora 11 M kernel-headers x86_64 4.13.9-300.fc27 fedora 1.2 M
When doing the --downloadonly, how do I disable the dependencies, since they are NOT crucial to networking the fc27 machine?
I do not understand why you throw up artificial barriers to progress. You're going to be downloading things to a flash drive and walk it over to the other system. So it isn't as if you're going to be short on space. Besides, "dependencies" are a dependency for a reason. If you ignore those and then try to install packages whose dependency you've ignored you are bound to run in to problems.
You spend more time raising irrelevant issues and then waiting for responses. Unless you are working on more than one machine, we know you now have one Wifi, the internal one, adapter being recognized by the system with the driver loaded.
wlp0s29f7u3: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether c0:25:e9:24:89:4b txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
You're just having problems with authentication to a router in a Starbucks. I've already made one suggestion which you've not followed up on. So, how about another? Take the machine to a different Wifi Router to where you have access and control over it.
On 01/22/2018 03:01 PM, Ed Greshko wrote:
On 01/23/18 03:14, JD wrote:
On 01/14/2018 02:22 PM, Ed Greshko wrote:
On 01/15/18 05:19, Ed Greshko wrote:
kernel-devel x86_64 4.14.13-300.fc27 updates 12 M kernel-headers x86_64 4.14.13-300.fc27 updates 1.2 M
Note these packages are from updates. If the laptop system hasn't been updated one can use....
dnf --disablerepo updates --downloadonly --downloaddir=/tmp install broadcom-wl
to get....
kernel-devel x86_64 4.13.9-300.fc27 fedora 11 M kernel-headers x86_64 4.13.9-300.fc27 fedora 1.2 M
When doing the --downloadonly, how do I disable the dependencies, since they are NOT crucial to networking the fc27 machine?
I do not understand why you throw up artificial barriers to progress. You're going to be downloading things to a flash drive and walk it over to the other system. So it isn't as if you're going to be short on space. Besides, "dependencies" are a dependency for a reason. If you ignore those and then try to install packages whose dependency you've ignored you are bound to run in to problems.
You spend more time raising irrelevant issues and then waiting for responses. Unless you are working on more than one machine, we know you now have one Wifi, the internal one, adapter being recognized by the system with the driver loaded.
wlp0s29f7u3: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether c0:25:e9:24:89:4b txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
You're just having problems with authentication to a router in a Starbucks. I've already made one suggestion which you've not followed up on. So, how about another? Take the machine to a different Wifi Router to where you have access and control over it.
Downloaded the rpms you had listed in your email. They are the following RPMS: akmods-0.5.6-10.fc27.noarch.rpm akmod-wl-6.30.223.271-14.fc27.x86_64.rpm akmod-wl-6.30.223.271-15.fc27.x86_64.rpm binutils-2.29-6.fc27.x86_64.rpm broadcom-wl-6.30.223.271-3.fc27.noarch.rpm cpp-7.2.1-2.fc27.x86_64.rpm dwz-0.12-5.fc27.x86_64.rpm elfutils-libelf-devel-0.170-1.fc27.x86_64.rpm fakeroot-1.22-1.fc27.x86_64.rpm fakeroot-libs-1.22-1.fc27.x86_64.rpm fedora-rpm-macros-26-3.fc27.noarch.rpm fpc-srpm-macros-1.1-3.fc27.noarch.rpm gcc-7.2.1-2.fc27.x86_64.rpm ghc-srpm-macros-1.4.2-6.fc27.noarch.rpm glibc-devel-2.26-15.fc27.x86_64.rpm glibc-headers-2.26-15.fc27.x86_64.rpm gnat-srpm-macros-4-4.fc27.noarch.rpm go-srpm-macros-2-10.fc27.noarch.rpm isl-0.16.1-3.fc27.x86_64.rpm kernel-devel-4.13.9-300.fc27.x86_64.rpm kernel-headers-4.13.9-300.fc27.x86_64.rpm kmodtool-1-25.fc27.noarch.rpm kmod-wl-6.30.223.271-15.fc27.x86_64.rpm ocaml-srpm-macros-5-2.fc27.noarch.rpm openblas-srpm-macros-2-2.fc27.noarch.rpm patch-2.7.5-6.fc27.x86_64.rpm perl-srpm-macros-1-24.fc27.noarch.rpm python-srpm-macros-3-22.fc27.noarch.rpm qt5-srpm-macros-5.9.1-2.fc27.noarch.rpm redhat-rpm-config-67-1.fc27.noarch.rpm rpm-build-4.14.0-2.fc27.x86_64.rpm rpmdevtools-8.10-3.fc27.noarch.rpm rpmfusion-free-release-27.noarch.rpm rpmfusion-nonfree-release-27.noarch.rpm rust-srpm-macros-4-3.fc27.noarch.rpm xemacs-filesystem-21.5.34-25.20170628hg97140cfdeca7.fc27.noarch.rpm zlib-devel-1.2.11-4.fc27.x86_64.rpm zstd-1.3.1-1.fc27.x86_64.rpm
Will install them in the f27 laptop as soon as I have access to it.
Will get back about it after then.
On 01/23/18 10:57, JD wrote:
Downloaded the rpms you had listed in your email.
Rule #671.5
Never use a list generated by another person, even if that list is correct. Especially, do not willy-nilly add or remove entries from the other list and use it.
Generate your own list using the commands the other person used. Your system may be different from that of the other person and may generate a different result.
On 01/23/18 10:57, JD wrote:
Downloaded the rpms you had listed in your email.
Rule #671.5
Never use a list generated by another person, even if that list is correct. Especially, do not willy-nilly add or remove entries from the other list and use it.
Generate your own list using the commands the other person used. Your system may be different from that of the other person and may generate a different result.
Oh, and another reason for following the rule? The contents of a repo may have changed since the time the other person generated it.
In other words, always do the *work* yourself.
On 01/22/2018 03:01 PM, Ed Greshko wrote:
On 01/23/18 03:14, JD wrote:
On 01/14/2018 02:22 PM, Ed Greshko wrote:
On 01/15/18 05:19, Ed Greshko wrote:
kernel-devel x86_64 4.14.13-300.fc27 updates 12 M kernel-headers x86_64 4.14.13-300.fc27 updates 1.2 M
Note these packages are from updates. If the laptop system hasn't been updated one can use....
dnf --disablerepo updates --downloadonly --downloaddir=/tmp install broadcom-wl
to get....
kernel-devel x86_64 4.13.9-300.fc27 fedora 11 M kernel-headers x86_64 4.13.9-300.fc27 fedora 1.2 M
When doing the --downloadonly, how do I disable the dependencies, since they are NOT crucial to networking the fc27 machine?
I do not understand why you throw up artificial barriers to progress. You're going to be downloading things to a flash drive and walk it over to the other system. So it isn't as if you're going to be short on space. Besides, "dependencies" are a dependency for a reason. If you ignore those and then try to install packages whose dependency you've ignored you are bound to run in to problems.
You spend more time raising irrelevant issues and then waiting for responses. Unless you are working on more than one machine, we know you now have one Wifi, the internal one, adapter being recognized by the system with the driver loaded.
wlp0s29f7u3: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether c0:25:e9:24:89:4b txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
You're just having problems with authentication to a router in a Starbucks. I've already made one suggestion which you've not followed up on. So, how about another? Take the machine to a different Wifi Router to where you have access and control over it.
Here is the output of the attempt to install:
================================================================================ Package Arch Version Repository Size ================================================================================ Installing: elfutils-libelf-devel x86_64 0.170-1.fc27 @commandline 46 k fakeroot x86_64 1.22-1.fc27 @commandline 102 k redhat-rpm-config noarch 67-1.fc27 @commandline 61 k rpm-build x86_64 4.14.0-2.fc27 @commandline 160 k rpmdevtools noarch 8.10-3.fc27 @commandline 105 k Skipping packages with conflicts: (add '--best --allowerasing' to command line to force their upgrade): akmod-wl x86_64 6.30.223.271-14.fc27 @commandline 5.5 M akmod-wl x86_64 6.30.223.271-15.fc27 @commandline 5.5 M Skipping packages with broken dependencies: akmods noarch 0.5.6-10.fc27 @commandline 23 k broadcom-wl noarch 6.30.223.271-3.fc27 @commandline 24 k gcc x86_64 7.2.1-2.fc27 @commandline 21 M glibc-devel x86_64 2.26-15.fc27 @commandline 985 k glibc-headers x86_64 2.26-15.fc27 @commandline 500 k kmod-wl x86_64 6.30.223.271-15.fc27 @commandline 23 k
Transaction Summary ================================================================================ Install 5 Packages Skip 8 Packages
to see the complete output of dnf, see https://www.sendspace.com/file/pqs7nc
Clearly I am doing something wrong, or I am simply having trouble with dependencies.
On 01/24/18 04:55, JD wrote:
On 01/22/2018 03:01 PM, Ed Greshko wrote:
On 01/23/18 03:14, JD wrote:
On 01/14/2018 02:22 PM, Ed Greshko wrote:
On 01/15/18 05:19, Ed Greshko wrote:
kernel-devel x86_64 4.14.13-300.fc27 updates 12 M kernel-headers x86_64 4.14.13-300.fc27 updates 1.2 M
Note these packages are from updates. If the laptop system hasn't been updated one can use....
dnf --disablerepo updates --downloadonly --downloaddir=/tmp install broadcom-wl
to get....
kernel-devel x86_64 4.13.9-300.fc27 fedora 11 M kernel-headers x86_64 4.13.9-300.fc27 fedora 1.2 M
When doing the --downloadonly, how do I disable the dependencies, since they are NOT crucial to networking the fc27 machine?
I do not understand why you throw up artificial barriers to progress. You're going to be downloading things to a flash drive and walk it over to the other system. So it isn't as if you're going to be short on space. Besides, "dependencies" are a dependency for a reason. If you ignore those and then try to install packages whose dependency you've ignored you are bound to run in to problems.
You spend more time raising irrelevant issues and then waiting for responses. Unless you are working on more than one machine, we know you now have one Wifi, the internal one, adapter being recognized by the system with the driver loaded.
wlp0s29f7u3: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether c0:25:e9:24:89:4b txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
You're just having problems with authentication to a router in a Starbucks. I've already made one suggestion which you've not followed up on. So, how about another? Take the machine to a different Wifi Router to where you have access and control over it.
Here is the output of the attempt to install:
================================================================================ Package Arch Version Repository Size ================================================================================ Installing: elfutils-libelf-devel x86_64 0.170-1.fc27 @commandline 46 k fakeroot x86_64 1.22-1.fc27 @commandline 102 k redhat-rpm-config noarch 67-1.fc27 @commandline 61 k rpm-build x86_64 4.14.0-2.fc27 @commandline 160 k rpmdevtools noarch 8.10-3.fc27 @commandline 105 k Skipping packages with conflicts: (add '--best --allowerasing' to command line to force their upgrade): akmod-wl x86_64 6.30.223.271-14.fc27 @commandline 5.5 M akmod-wl x86_64 6.30.223.271-15.fc27 @commandline 5.5 M Skipping packages with broken dependencies: akmods noarch 0.5.6-10.fc27 @commandline 23 k broadcom-wl noarch 6.30.223.271-3.fc27 @commandline 24 k gcc x86_64 7.2.1-2.fc27 @commandline 21 M glibc-devel x86_64 2.26-15.fc27 @commandline 985 k glibc-headers x86_64 2.26-15.fc27 @commandline 500 k kmod-wl x86_64 6.30.223.271-15.fc27 @commandline 23 k
Transaction Summary
Install 5 Packages Skip 8 Packages
to see the complete output of dnf, see https://www.sendspace.com/file/pqs7nc
Clearly I am doing something wrong, or I am simply having trouble with dependencies.
I am sorry for not checking your work before you continued.
For starters, if you look at the list I generated on 1/15 you'd see there is a single occurrence of akmod-wl and you've listed 2. That same list I gave on 1/15 does not contain kmod-wl while yours does.
You really need to pay attention to what you're doing. The best thing you can do is follow precise instructions.... Those instructions are in another email of 1/5 and are...
On a system with a functional internet connection you can find out what packages are needed to install the broadcom-wl package from RPMfusion in one of 2 ways.
Way One
1. In a Virtual Machine boot the Live-OS of the spin installed on the laptop. 2. Install the RPMfusion repos to the Live-OS. 3. Issue the command dnf --downloadonly --downloaddir=/tmp install broadcom-wl 4. Transfer the downloaded rpm file to external media 5. Make sure that "kernel" packages downloaded match the kernel version on the laptop and if not download those from koji.
Way Two
1. Do the exact same as above but after installing the Live-OS in a VM
Way Three
1. Boot the Live-OS on bare metal and do the same as above
On 01/14/2018 02:22 PM, Ed Greshko wrote:
On 01/15/18 05:19, Ed Greshko wrote:
kernel-devel x86_64 4.14.13-300.fc27 updates 12 M kernel-headers x86_64 4.14.13-300.fc27 updates 1.2 M
Note these packages are from updates. If the laptop system hasn't been updated one can use....
dnf --disablerepo updates --downloadonly --downloaddir=/tmp install broadcom-wl
to get....
kernel-devel x86_64 4.13.9-300.fc27 fedora 11 M kernel-headers x86_64 4.13.9-300.fc27 fedora 1.2 M
All done and installed and all is well on my friend's f27 laptop. The snag I ran into had to do with the fact that the un-networked laptop, while trying to install the broadcom rpm and the dependencies, kept throwing me a curve: dnf kep saying it was unable to sync with the repositories: updates, fedora, rpmfusion....
How could it, since I was trying to install the very things that WOULD enable it to sync. So, before I gave up, I added the command argument: --disablerepo=* and lo and behold all the rpms in question got installed, and I rebooted, and the network was on. Ran updates. All is well.
Thanx a lot!!
On Wed, Jan 24, 2018 at 8:35 PM, JD jd1008@gmail.com wrote:
On 01/14/2018 02:22 PM, Ed Greshko wrote:
On 01/15/18 05:19, Ed Greshko wrote:
kernel-devel x86_64 4.14.13-300.fc27 updates 12 M kernel-headers x86_64 4.14.13-300.fc27 updates 1.2 M
Note these packages are from updates. If the laptop system hasn't been updated one can use....
dnf --disablerepo updates --downloadonly --downloaddir=/tmp install broadcom-wl
to get....
kernel-devel x86_64 4.13.9-300.fc27 fedora 11 M kernel-headers x86_64 4.13.9-300.fc27 fedora 1.2 M
All done and installed and all is well on my friend's f27 laptop. The snag I ran into had to do with the fact that the un-networked laptop, while trying to install the broadcom rpm and the dependencies, kept throwing me a curve: dnf kep saying it was unable to sync with the repositories: updates, fedora, rpmfusion....
How could it, since I was trying to install the very things that WOULD enable it to sync. So, before I gave up, I added the command argument: --disablerepo=* and lo and behold all the rpms in question got installed, and I rebooted, and the network was on. Ran updates. All is well.
Thanx a lot!!
users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org
JD
I don't believe that the workstation ISO will have what you need, as it is a netinstall image. You will probably want the server image, I'm downloading that to check it now.
On Thu, Jan 25, 2018 at 8:38 AM, Terry Polzin foxec208@gmail.com wrote:
On Wed, Jan 24, 2018 at 8:35 PM, JD jd1008@gmail.com wrote:
On 01/14/2018 02:22 PM, Ed Greshko wrote:
On 01/15/18 05:19, Ed Greshko wrote:
kernel-devel x86_64 4.14.13-300.fc27 updates 12 M kernel-headers x86_64 4.14.13-300.fc27 updates 1.2 M
Note these packages are from updates. If the laptop system hasn't been updated one can use....
dnf --disablerepo updates --downloadonly --downloaddir=/tmp install broadcom-wl
to get....
kernel-devel x86_64 4.13.9-300.fc27 fedora 11 M kernel-headers x86_64 4.13.9-300.fc27 fedora 1.2 M
All done and installed and all is well on my friend's f27 laptop. The snag I ran into had to do with the fact that the un-networked laptop, while trying to install the broadcom rpm and the dependencies, kept throwing me a curve: dnf kep saying it was unable to sync with the repositories: updates, fedora, rpmfusion....
How could it, since I was trying to install the very things that WOULD enable it to sync. So, before I gave up, I added the command argument: --disablerepo=* and lo and behold all the rpms in question got installed, and I rebooted, and the network was on. Ran updates. All is well.
Thanx a lot!!
users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org
JD
I don't believe that the workstation ISO will have what you need, as it is a netinstall image. You will probably want the server image, I'm downloading that to check it now.
JD
The server iso has what you need,
On 01/25/2018 07:14 AM, Terry Polzin wrote:
On Thu, Jan 25, 2018 at 8:38 AM, Terry Polzin <foxec208@gmail.com mailto:foxec208@gmail.com> wrote:
On Wed, Jan 24, 2018 at 8:35 PM, JD <jd1008@gmail.com <mailto:jd1008@gmail.com>> wrote: On 01/14/2018 02:22 PM, Ed Greshko wrote: On 01/15/18 05:19, Ed Greshko wrote: kernel-devel x86_64 4.14.13-300.fc27 updates 12 M kernel-headers x86_64 4.14.13-300.fc27 updates 1.2 M Note these packages are from updates. If the laptop system hasn't been updated one can use.... dnf --disablerepo updates --downloadonly --downloaddir=/tmp install broadcom-wl to get.... kernel-devel x86_64 4.13.9-300.fc27 fedora 11 M kernel-headers x86_64 4.13.9-300.fc27 fedora 1.2 M All done and installed and all is well on my friend's f27 laptop. The snag I ran into had to do with the fact that the un-networked laptop, while trying to install the broadcom rpm and the dependencies, kept throwing me a curve: dnf kep saying it was unable to sync with the repositories: updates, fedora, rpmfusion.... How could it, since I was trying to install the very things that WOULD enable it to sync. So, before I gave up, I added the command argument: --disablerepo=* and lo and behold all the rpms in question got installed, and I rebooted, and the network was on. Ran updates. All is well. Thanx a lot!! _______________________________________________ users mailing list -- users@lists.fedoraproject.org <mailto:users@lists.fedoraproject.org> To unsubscribe send an email to users-leave@lists.fedoraproject.org <mailto:users-leave@lists.fedoraproject.org> JD I don't believe that the workstation ISO will have what you need, as it is a netinstall image. You will probably want the server image, I'm downloading that to check it now.JD
The server iso has what you need,
Yes you are right, but it is too late now :)
I should have looked there myself :)
On Thu, Jan 25, 2018 at 8:30 PM, JD jd1008@gmail.com wrote:
On 01/25/2018 07:14 AM, Terry Polzin wrote:
On Thu, Jan 25, 2018 at 8:38 AM, Terry Polzin <foxec208@gmail.com mailto:foxec208@gmail.com> wrote:
On Wed, Jan 24, 2018 at 8:35 PM, JD <jd1008@gmail.com <mailto:jd1008@gmail.com>> wrote: On 01/14/2018 02:22 PM, Ed Greshko wrote: On 01/15/18 05:19, Ed Greshko wrote: kernel-devel x86_64 4.14.13-300.fc27 updates 12 M kernel-headers x86_64 4.14.13-300.fc27 updates 1.2 M Note these packages are from updates. If the laptop system hasn't been updated one can use.... dnf --disablerepo updates --downloadonly --downloaddir=/tmp install broadcom-wl to get.... kernel-devel x86_64 4.13.9-300.fc27 fedora 11 M kernel-headers x86_64 4.13.9-300.fc27 fedora 1.2 M All done and installed and all is well on my friend's f27 laptop. The snag I ran into had to do with the fact that the un-networked laptop, while trying to install the broadcom rpm and the dependencies, kept throwing me a curve: dnf kep saying it was unable to sync with the repositories: updates, fedora, rpmfusion.... How could it, since I was trying to install the very things that WOULD enable it to sync. So, before I gave up, I added the command argument: --disablerepo=* and lo and behold all the rpms in question got installed, and I rebooted, and the network was on. Ran updates. All is well. Thanx a lot!! _______________________________________________ users mailing list -- users@lists.fedoraproject.org <mailto:users@lists.fedoraproject.org> To unsubscribe send an email to users-leave@lists.fedoraproject.org <mailto:users-leave@lists.fedoraproject.org> JD I don't believe that the workstation ISO will have what you need, as it is a netinstall image. You will probably want the server image, I'm downloading that to check it now.JD
The server iso has what you need,
Yes you are right, but it is too late now :)
I should have looked there myself :) _______________________________________________ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org
Sorry for the delay JD got busy at the office -Terry
It's quite alright. At any rate, the fedora release packages would not have helped a lot, because the crucial packages had to come from rpmfusion in order to enable the functioning of the broadcom 4322 chipset. Cheers, JD
On Fri, Jan 26, 2018 at 2:18 AM, Terry Polzin foxec208@gmail.com wrote:
On Thu, Jan 25, 2018 at 8:30 PM, JD jd1008@gmail.com wrote:
On 01/25/2018 07:14 AM, Terry Polzin wrote:
On Thu, Jan 25, 2018 at 8:38 AM, Terry Polzin <foxec208@gmail.com mailto:foxec208@gmail.com> wrote:
On Wed, Jan 24, 2018 at 8:35 PM, JD <jd1008@gmail.com <mailto:jd1008@gmail.com>> wrote: On 01/14/2018 02:22 PM, Ed Greshko wrote: On 01/15/18 05:19, Ed Greshko wrote: kernel-devel x86_64 4.14.13-300.fc27 updates 12 M kernel-headers x86_64 4.14.13-300.fc27 updates 1.2 M Note these packages are from updates. If the laptop system hasn't been updated one can use.... dnf --disablerepo updates --downloadonly --downloaddir=/tmp install broadcom-wl to get.... kernel-devel x86_64 4.13.9-300.fc27 fedora 11 M kernel-headers x86_64 4.13.9-300.fc27 fedora 1.2 M All done and installed and all is well on my friend's f27 laptop. The snag I ran into had to do with the fact that the un-networked laptop, while trying to install the broadcom rpm and the dependencies, kept throwing me a curve: dnf kep saying it was unable to sync with the repositories: updates, fedora, rpmfusion.... How could it, since I was trying to install the very things that WOULD enable it to sync. So, before I gave up, I added the command argument: --disablerepo=* and lo and behold all the rpms in question got installed, and I rebooted, and the network was on. Ran updates. All is well. Thanx a lot!! _______________________________________________ users mailing list -- users@lists.fedoraproject.org <mailto:users@lists.fedoraproject.org> To unsubscribe send an email to users-leave@lists.fedoraproject.org <mailto:users-leave@lists.fedoraproject.org> JD I don't believe that the workstation ISO will have what you need, as it is a netinstall image. You will probably want the server image, I'm downloading that to check it now.JD
The server iso has what you need,
Yes you are right, but it is too late now :)
I should have looked there myself :) _______________________________________________ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org
Sorry for the delay JD got busy at the office -Terry
users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org
On 01/14/2018 02:22 PM, Ed Greshko wrote:
On 01/15/18 05:19, Ed Greshko wrote:
kernel-devel x86_64 4.14.13-300.fc27 updates 12 M kernel-headers x86_64 4.14.13-300.fc27 updates 1.2 M
Note these packages are from updates. If the laptop system hasn't been updated one can use....
dnf --disablerepo updates --downloadonly --downloaddir=/tmp install broadcom-wl
to get....
kernel-devel x86_64 4.13.9-300.fc27 fedora 11 M kernel-headers x86_64 4.13.9-300.fc27 fedora 1.2 M
After all this time, I was able to return to my friend's laptop and I was ready with all the rpms outlined by Ed.
They all installed, albeit, with the command option --disablerepo=* They all installed, (from external disk), and I rebooted. Network came up. I thought I was out of the woods and into a well mapped world. I did the update, and all the packages updated. No problems. I did a clean shutdown. That was yesterday. Today, I powered up the machine, and it proceeded to do fsck!!!! But I had done a clean install and a clcean shutdown!!! After fsck, I rebooted. AGAIN - machines started to do fsck. I waited, did another clean shutdown. AGAIN the machine ran fsck.... How in tarnation can I put an end to this? I had not experienced this on other machines running older versions of fedora. OK... that was the first problem today, Problem 2: Network will not come up!!!! :( :( :( I checked to make sure all the rpm packages that brought up the network were still there. And indeed they are. Yet the network will not come up :( I have to admit that I had not set up a proper firewall yesterday. The machine's firewall was still in it's "first install state" and I assume in a "promiscuous" configuration. I do not know, I am only guessing what could have happened and by what cause!!!
So, how do I proceed now? Should I re-install the rpms that first brought up the machine's wifi?
Hi,
what about using a FTP client with CLI to download the Repository- directories?
You could download them from one of the FTP morrors to an external HDD and run createrepo. Then you should be able to use them for installation.
If your problem is about WiFI not available, you could use an Ethernet cable and install, or you can install the developer packages, build the driver and everything should work. AFAIK GCC and the needed Devel- Packages are already included in the installation disk iomage.
Regards, Dirk
Am Sonntag, den 14.01.2018, 10:31 -0700 schrieb JD:
I do understand that robots are not allowed. In my current situation, I would NEED to be able to download all the Packages, save them all on a thumb drive, and make yum use that as the repo, to fix my problems with a non-networked machined. _______________________________________________ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org
-
David King -
dirk.gottschalk1980＠googlemail.com -
Ed Greshko -
Ed Greshko -
JD -
Jose Maria Terry Jimenez -
Kam Leo -
Terry Polzin