Hi,
this is somehow off-topic, but hopefully someone here has been through this already...
I just bought a shiny new Core 2 Duo machine (Intel DG33BU mobo), with a nice 250G SATA disk. Fedora 7 installation went surprisingly well (and fast), only problem was that onboard NIC was not recognized, but upgrading the kernel offline fixed this. Everything is amazingly fast =)
BUT... I need this machine to dual-boot to Windows XP (still addicted to some Windows-only games =( ). XP setup CD hangs just after showing "examining hardware configuration" or something like that. It doesn't really hangs, it just switches to a blank screen and sits there forever (I already left it there for more than 15min to no avail). Keyboard is responsive and HD led stays on. CTRL+ALT+DEL reboots as expected.
I talked to IT guys at work and they told me they've been through this already lots of times, it seems XP is unable to properly recognize the disk when only Linux is installed on it (?!?), and only solution would be to reformat the whole thing and install XP first.
Is that true?
My system is configured as:
~ fdisk -l /dev/sda
Disk /dev/sda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 10467 83971755 8e Linux LVM
HD specs are:
~ hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media Model Number: SAMSUNG SP2504C Serial Number: S09QJ1SP208120 Firmware Revision: VT100-50
GRUB is installed on MBR. All remaining space is sitting there, waiting for XP to take over... =/
Anyone knows of a workaround? Should I try to create an additional partition on the empty space and format it as VFAT hoping this would make Windoze less stupid? Or am I doomed to remove all partitions and start from scratch, starting with XP?
TIA
Andre
On Fri, 2007-08-10 at 18:07 -0300, André Costa wrote:
Hi,
this is somehow off-topic, but hopefully someone here has been through this already...
I just bought a shiny new Core 2 Duo machine (Intel DG33BU mobo), with a nice 250G SATA disk. Fedora 7 installation went surprisingly well (and fast), only problem was that onboard NIC was not recognized, but upgrading the kernel offline fixed this. Everything is amazingly fast =)
BUT... I need this machine to dual-boot to Windows XP (still addicted to some Windows-only games =( ). XP setup CD hangs just after showing "examining hardware configuration" or something like that. It doesn't really hangs, it just switches to a blank screen and sits there forever (I already left it there for more than 15min to no avail). Keyboard is responsive and HD led stays on. CTRL+ALT+DEL reboots as expected.
I talked to IT guys at work and they told me they've been through this already lots of times, it seems XP is unable to properly recognize the disk when only Linux is installed on it (?!?), and only solution would be to reformat the whole thing and install XP first.
Is that true?
It is true that it is better to install XP first. I have had cases like yours. Did you create a partition for XP? One can not tell from your fdisk -l output. If not you are lost.
However, If there is such a partition. make it type 7 with fdisk. Then retry your XP install.
-- ======================================================================= A would-be disciple came to Nasrudin's hut on the mountain-side. Knowing that every action of such an enlightened one is significant, the seeker watched the teacher closely. "Why do you blow on your hands?" "To warm myself in the cold." Later, Nasrudin poured bowls of hot soup for himself and the newcomer, and blew on his own. "Why are you doing that, Master?" "To cool the soup." Unable to trust a man who uses the same process to arrive at two different results -- hot and cold -- the disciple departed. ======================================================================= Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam@sbcglobal.net
Hi Aaron, thks for stepping in.
On 8/10/07, Aaron Konstam akonstam@sbcglobal.net wrote:
On Fri, 2007-08-10 at 18:07 -0300, André Costa wrote:
Hi,
this is somehow off-topic, but hopefully someone here has been through this already...
I just bought a shiny new Core 2 Duo machine (Intel DG33BU mobo), with a nice 250G SATA disk. Fedora 7 installation went surprisingly well (and fast), only problem was that onboard NIC was not recognized, but upgrading the kernel offline fixed this. Everything is amazingly fast =)
BUT... I need this machine to dual-boot to Windows XP (still addicted to some Windows-only games =( ). XP setup CD hangs just after showing "examining hardware configuration" or something like that. It doesn't really hangs, it just switches to a blank screen and sits there forever (I already left it there for more than 15min to no avail). Keyboard is responsive and HD led stays on. CTRL+ALT+DEL reboots as expected.
I talked to IT guys at work and they told me they've been through this already lots of times, it seems XP is unable to properly recognize the disk when only Linux is installed on it (?!?), and only solution would be to reformat the whole thing and install XP first.
Is that true?
It is true that it is better to install XP first. I have had cases like yours. Did you create a partition for XP? One can not tell from your fdisk -l output. If not you are lost.
However, If there is such a partition. make it type 7 with fdisk. Then retry your XP install.
I haven't created a partition for XP, but I just did that with gparted on the empty partition, and marked it as HPFS/NTFS (type 7):
~ fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 10467 83971755 8e Linux LVM /dev/sda3 10468 30401 160119855 7 HPFS/NTFS
Still, nothing happens. ... stupid XP, I can't believe I'll have to reinstall everything because of it =/
If that's really the case, what should I do? Reboot from Fedora installation CD into rescue mode, run fdisk and remove all partitions?
Something just occurred to me: what if I managed to boot from a Linux rescue CD, ran gparted and marked both /dev/sda1 and /dev/sda2 as "hidden" partitions? Could this work?
Regards,
Andre
On Fri, 10 Aug 2007 19:03:16 -0300 "André Costa" blueser@gmail.com wrote:
If that's really the case, what should I do? Reboot from Fedora installation CD into rescue mode, run fdisk and remove all partitions?
That's what I did when I reinstalled.
Something just occurred to me: what if I managed to boot from a Linux rescue CD, ran gparted and marked both /dev/sda1 and /dev/sda2 as "hidden" partitions? Could this work?
You could try it I suppose, if it doesn't work, you could try the more drastic approach.
Hi Tom,
On 8/10/07, Tom Horsley tom.horsley@att.net wrote:
On Fri, 10 Aug 2007 19:03:16 -0300 "André Costa" blueser@gmail.com wrote:
If that's really the case, what should I do? Reboot from Fedora installation CD into rescue mode, run fdisk and remove all partitions?
That's what I did when I reinstalled.
Thks, at least now I know a safe route =)
Something just occurred to me: what if I managed to boot from a Linux rescue CD, ran gparted and marked both /dev/sda1 and /dev/sda2 as "hidden" partitions? Could this work?
You could try it I suppose, if it doesn't work, you could try the more drastic approach.
Guess I'll give it a try as soon as I can. Seems I'm screwed anyway, wouldn't hurt to try it...
I realized I might not need gparted, fdisk might be able to do it. I could try to set /dev/sda[12] to type 17 (hidden HPFS/NTFS) -- I just tried it with the (empty) NTFS partition on /dev/sda3. Question: changing a partition's type shouldn't alter any of its data, should it?
Thks again,
Andre
<snip>
I realized I might not need gparted, fdisk might be able to do it. I could try to set /dev/sda[12] to type 17 (hidden HPFS/NTFS) -- I just tried it with the (empty) NTFS partition on /dev/sda3. Question: changing a partition's type shouldn't alter any of its data, should it?
Thks again,
Andre
No the XP partition should be type 7. -- ======================================================================= skldfjkljklsR%^&(IXDRTYju187pkasdjbasdfbuil h;asvgy8p 23r1vyui135 2 kmxsij90TYDFS$$b jkzxdjkl bjnk ;j nk;<[][;-==-<<<<<';[, [hjioasdvbnuio;buip^&(FTSD$%*VYUI:buio;sdf}[asdf'] sdoihjfh(_YU*G&F^*CTY98y Now look what you've gone and done! You've broken it! ======================================================================= Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam@sbcglobal.net
Hi Aaron,
On 8/11/07, Aaron Konstam akonstam@sbcglobal.net wrote:
<snip> > > I realized I might not need gparted, fdisk might be able to do it. I > could try to set /dev/sda[12] to type 17 (hidden HPFS/NTFS) -- I just > tried it with the (empty) NTFS partition on /dev/sda3. Question: > changing a partition's type shouldn't alter any of its data, should > it? > > Thks again, > > Andre > No the XP partition should be type 7.
Sorry, I guess I didn't express myself right. I just tried setting /dev/sda3 as type 17 to see if messing with it would be trivial. What I was asking was if it would work with my "live" Linux partitions (/dev/sda[12]). I'll try it tomorrow, after backing up what I've installed so far.
Thks again,
Andre
On Fri, 2007-08-10 at 19:03 -0300, André Costa wrote:
Hi Aaron, thks for stepping in.
On 8/10/07, Aaron Konstam akonstam@sbcglobal.net wrote:
On Fri, 2007-08-10 at 18:07 -0300, André Costa wrote:
Hi,
this is somehow off-topic, but hopefully someone here has been through this already...
I just bought a shiny new Core 2 Duo machine (Intel DG33BU mobo), with a nice 250G SATA disk. Fedora 7 installation went surprisingly well (and fast), only problem was that onboard NIC was not recognized, but upgrading the kernel offline fixed this. Everything is amazingly fast =)
BUT... I need this machine to dual-boot to Windows XP (still addicted to some Windows-only games =( ). XP setup CD hangs just after showing "examining hardware configuration" or something like that. It doesn't really hangs, it just switches to a blank screen and sits there forever (I already left it there for more than 15min to no avail). Keyboard is responsive and HD led stays on. CTRL+ALT+DEL reboots as expected.
I talked to IT guys at work and they told me they've been through this already lots of times, it seems XP is unable to properly recognize the disk when only Linux is installed on it (?!?), and only solution would be to reformat the whole thing and install XP first.
Is that true?
It is true that it is better to install XP first. I have had cases like yours. Did you create a partition for XP? One can not tell from your fdisk -l output. If not you are lost.
However, If there is such a partition. make it type 7 with fdisk. Then retry your XP install.
I haven't created a partition for XP, but I just did that with gparted on the empty partition, and marked it as HPFS/NTFS (type 7):
~ fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 10467 83971755 8e Linux LVM /dev/sda3 10468 30401 160119855 7 HPFS/NTFS
Still, nothing happens. ... stupid XP, I can't believe I'll have to reinstall everything because of it =/
If that's really the case, what should I do? Reboot from Fedora installation CD into rescue mode, run fdisk and remove all partitions?
Something just occurred to me: what if I managed to boot from a Linux rescue CD, ran gparted and marked both /dev/sda1 and /dev/sda2 as "hidden" partitions? Could this work?
All versions of Windows (except perhaps Vista...haven't tried it) think they they own the entire system. If there's any non-Microsoft filesystem on the disk, the installer stalls. You have to purge the disk and install Windows first. When you install Windows, only give it as much disk as you want...make sure the rest is "unused space".
NOW you can install Fedora. Anaconda will see the Windows stuff and add it to the grub configuration allowing you to multiboot.
---------------------------------------------------------------------- - Rick Stevens, Principal Engineer rstevens@internap.com - - CDN Systems, Internap, Inc. http://www.internap.com - - - - Okay, who put a "stop payment" on my reality check? - ----------------------------------------------------------------------
Hi Rick,
On 8/10/07, Rick Stevens rstevens@internap.com wrote:
On Fri, 2007-08-10 at 19:03 -0300, André Costa wrote:
Hi Aaron, thks for stepping in.
On 8/10/07, Aaron Konstam akonstam@sbcglobal.net wrote:
On Fri, 2007-08-10 at 18:07 -0300, André Costa wrote:
Hi,
this is somehow off-topic, but hopefully someone here has been through this already...
I just bought a shiny new Core 2 Duo machine (Intel DG33BU mobo), with a nice 250G SATA disk. Fedora 7 installation went surprisingly well (and fast), only problem was that onboard NIC was not recognized, but upgrading the kernel offline fixed this. Everything is amazingly fast =)
BUT... I need this machine to dual-boot to Windows XP (still addicted to some Windows-only games =( ). XP setup CD hangs just after showing "examining hardware configuration" or something like that. It doesn't really hangs, it just switches to a blank screen and sits there forever (I already left it there for more than 15min to no avail). Keyboard is responsive and HD led stays on. CTRL+ALT+DEL reboots as expected.
I talked to IT guys at work and they told me they've been through this already lots of times, it seems XP is unable to properly recognize the disk when only Linux is installed on it (?!?), and only solution would be to reformat the whole thing and install XP first.
Is that true?
It is true that it is better to install XP first. I have had cases like yours. Did you create a partition for XP? One can not tell from your fdisk -l output. If not you are lost.
However, If there is such a partition. make it type 7 with fdisk. Then retry your XP install.
I haven't created a partition for XP, but I just did that with gparted on the empty partition, and marked it as HPFS/NTFS (type 7):
~ fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 10467 83971755 8e Linux LVM /dev/sda3 10468 30401 160119855 7 HPFS/NTFS
Still, nothing happens. ... stupid XP, I can't believe I'll have to reinstall everything because of it =/
If that's really the case, what should I do? Reboot from Fedora installation CD into rescue mode, run fdisk and remove all partitions?
Something just occurred to me: what if I managed to boot from a Linux rescue CD, ran gparted and marked both /dev/sda1 and /dev/sda2 as "hidden" partitions? Could this work?
All versions of Windows (except perhaps Vista...haven't tried it) think they they own the entire system. If there's any non-Microsoft filesystem on the disk, the installer stalls. You have to purge the disk and install Windows first. When you install Windows, only give it as much disk as you want...make sure the rest is "unused space".
NOW you can install Fedora. Anaconda will see the Windows stuff and add it to the grub configuration allowing you to multiboot.
Sounds pretty much like MS usual way of handling things, right? ;-)
Thks for the info, it really looks like I'll need to redo the whole thing, starting with XP this time -- unless my "partition hiding" move described on a previous message works... fingers crossed ;-)
Regards,
Andre
On Fri, 2007-08-10 at 19:03 -0300, André Costa wrote:
Hi Aaron, thks for stepping in.
On 8/10/07, Aaron Konstam akonstam@sbcglobal.net wrote:
On Fri, 2007-08-10 at 18:07 -0300, André Costa wrote:
Hi,
this is somehow off-topic, but hopefully someone here has been through this already...
I just bought a shiny new Core 2 Duo machine (Intel DG33BU mobo), with a nice 250G SATA disk. Fedora 7 installation went surprisingly well (and fast), only problem was that onboard NIC was not recognized, but upgrading the kernel offline fixed this. Everything is amazingly fast =)
BUT... I need this machine to dual-boot to Windows XP (still addicted to some Windows-only games =( ). XP setup CD hangs just after showing "examining hardware configuration" or something like that. It doesn't really hangs, it just switches to a blank screen and sits there forever (I already left it there for more than 15min to no avail). Keyboard is responsive and HD led stays on. CTRL+ALT+DEL reboots as expected.
I talked to IT guys at work and they told me they've been through this already lots of times, it seems XP is unable to properly recognize the disk when only Linux is installed on it (?!?), and only solution would be to reformat the whole thing and install XP first.
Is that true?
It is true that it is better to install XP first. I have had cases like yours. Did you create a partition for XP? One can not tell from your fdisk -l output. If not you are lost.
However, If there is such a partition. make it type 7 with fdisk. Then retry your XP install.
I haven't created a partition for XP, but I just did that with gparted on the empty partition, and marked it as HPFS/NTFS (type 7):
~ fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 10467 83971755 8e Linux LVM /dev/sda3 10468 30401 160119855 7 HPFS/NTFS
Still, nothing happens. ... stupid XP, I can't believe I'll have to reinstall everything because of it =/
If that's really the case, what should I do? Reboot from Fedora installation CD into rescue mode, run fdisk and remove all partitions?
Something just occurred to me: what if I managed to boot from a Linux rescue CD, ran gparted and marked both /dev/sda1 and /dev/sda2 as "hidden" partitions? Could this work?
Regards,
Andre
I apologize for not mentioning the possibility of using gparted. But I am still confused. Where is your swap partition. Part of the problem is that XP deals with the partition table differently than Linux.
If you have to start again this is what to do. Repartition the disk from scratch using fdisk from rescue mode . Arrange to install XP first on the first partition. Then install Linux and I am sure it will work. I have done this many times and with this arrangement things work.
But please assign a swap partition. Also when installing Linux use the Custom partitioning option. -- ======================================================================= Politics -- the gentle art of getting votes from the poor and campaign funds from the rich by promising to protect each from the other. -- Oscar Ameringer ======================================================================= Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam@sbcglobal.net
Hi Aaron,
On 8/11/07, Aaron Konstam akonstam@sbcglobal.net wrote:
On Fri, 2007-08-10 at 19:03 -0300, André Costa wrote:
Hi Aaron, thks for stepping in.
On 8/10/07, Aaron Konstam akonstam@sbcglobal.net wrote:
On Fri, 2007-08-10 at 18:07 -0300, André Costa wrote:
Hi,
this is somehow off-topic, but hopefully someone here has been through this already...
I just bought a shiny new Core 2 Duo machine (Intel DG33BU mobo), with a nice 250G SATA disk. Fedora 7 installation went surprisingly well (and fast), only problem was that onboard NIC was not recognized, but upgrading the kernel offline fixed this. Everything is amazingly fast =)
BUT... I need this machine to dual-boot to Windows XP (still addicted to some Windows-only games =( ). XP setup CD hangs just after showing "examining hardware configuration" or something like that. It doesn't really hangs, it just switches to a blank screen and sits there forever (I already left it there for more than 15min to no avail). Keyboard is responsive and HD led stays on. CTRL+ALT+DEL reboots as expected.
I talked to IT guys at work and they told me they've been through this already lots of times, it seems XP is unable to properly recognize the disk when only Linux is installed on it (?!?), and only solution would be to reformat the whole thing and install XP first.
Is that true?
It is true that it is better to install XP first. I have had cases like yours. Did you create a partition for XP? One can not tell from your fdisk -l output. If not you are lost.
However, If there is such a partition. make it type 7 with fdisk. Then retry your XP install.
I haven't created a partition for XP, but I just did that with gparted on the empty partition, and marked it as HPFS/NTFS (type 7):
~ fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 10467 83971755 8e Linux LVM /dev/sda3 10468 30401 160119855 7 HPFS/NTFS
Still, nothing happens. ... stupid XP, I can't believe I'll have to reinstall everything because of it =/
If that's really the case, what should I do? Reboot from Fedora installation CD into rescue mode, run fdisk and remove all partitions?
Something just occurred to me: what if I managed to boot from a Linux rescue CD, ran gparted and marked both /dev/sda1 and /dev/sda2 as "hidden" partitions? Could this work?
Regards,
Andre
I apologize for not mentioning the possibility of using gparted. But I am still confused. Where is your swap partition. Part of the problem is that XP deals with the partition table differently than Linux.
The swap partition is "inside" the LVM partition, as suggested by anaconda during installation.
If you have to start again this is what to do. Repartition the disk from scratch using fdisk from rescue mode . Arrange to install XP first on the first partition. Then install Linux and I am sure it will work. I have done this many times and with this arrangement things work.
Cool, thks for confirming that. NTFS will occupy the first 150G, can this be a problem for grub?
But please assign a swap partition. Also when installing Linux use the Custom partitioning option.
Will do that, thks again.
Regards,
Andre
André Costa wrote:
Cool, thks for confirming that. NTFS will occupy the first 150G, can this be a problem for grub?
No, because the file system is not occupying the MBR (http://en.wikipedia.org/wiki/Master_boot_record). The Windows boot loader *will* be installed to the MBR, but GRUB stage 1 will overwrite this when you install Fedora, and that's okay because GRUB definitely knows how to load Windows.
Matt Flaschen
<snip>
If you have to start again this is what to do. Repartition the disk from scratch using fdisk from rescue mode . Arrange to install XP first on the first partition. Then install Linux and I am sure it will work. I have done this many times and with this arrangement things work.
Cool, thks for confirming that. NTFS will occupy the first 150G, can this be a problem for grub?
It is not a problem for grub
But please assign a swap partition. Also when installing Linux use the Custom partitioning option.
Will do that, thks again.
Regards,
Andre
-- ======================================================================= Would the last person to leave Michigan please turn out the lights? ======================================================================= Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam@sbcglobal.net
Aaron Konstam wrote:
On Fri, 2007-08-10 at 18:07 -0300, André Costa wrote:
[much snippage]
I just bought a shiny new Core 2 Duo machine (Intel DG33BU mobo), with a nice 250G SATA disk. Fedora 7 installation went surprisingly well (and fast), only problem was that onboard NIC was not recognized, but upgrading the kernel offline fixed this. Everything is amazingly fast =)
BUT... I need this machine to dual-boot to Windows XP (still addicted to some Windows-only games =( ). XP setup CD hangs just after showing "examining hardware configuration" or something like that. It doesn't really hangs, it just switches to a blank screen and sits there forever (I already left it there for more than 15min to no avail). Keyboard is responsive and HD led stays on. CTRL+ALT+DEL reboots as expected.
[snippage]
It is true that it is better to install XP first. I have had cases like
yours. Did you create a partition for XP? One can not tell from your fdisk -l output. If not you are lost.
However, If there is such a partition. make it type 7 with fdisk. Then retry your XP install.
I'm doing a variation of what Andre did. I replaced a crashed hard drive on a computer. Until I can find the restore CD to restore Windows XP, I want to install Fedora 7 first just to test things out a bit and shake the system down for other defects. It is still important that I be able to install Windows XP but that will have to wait for a few days at least. So here is what I did:
Created a Linux partition /dev/sda4 of partition type 83 from cylinder 26901 to 30401. This was my first step. I thought if I did this, the anaconda installer for Fedora 7 would see my handiwork and not disturb cylinders 1 through 26900. How wrong I was.
Created a large NTFS partition /dev/sda1 (of partition type 87, not type 7) using the FDISK that is on the Fedora 7 DVD. This partition is from cylinders 1 to 26900.
Wrote the partition table change to disk, then started the Fedora 7 installation. Now results are much better. The installer did change the Linux partition number from /dev/sda4 to /dev/sda3, but it looks okay. And the installation is pretty fast too even on a system with only 256 Mb of RAM. Thank heavens for a reasonably quick drive with an 8 Mb cache.
Question: do my actions make sense? Will I be able to install Windows XP without a problem considering I have an NTFS partition type of 87? Or should I change this (post-Fedora install) to partition type 7?
Thanks
Bob Cochran
I had WinXP & F9. Yesterday I tried to reinstall WinXP and it was successfull after partition hide with gparted.
But now I have problem with MBR. I hadn't any linux cd/dvd so downloaded F9 KDE Live (Full linux dvd download about 36 hours). I run F9 KDE Live and try to fix MBR. 1 - mount boot disk as /boot, 2 - grub-install /dev/my_boot_disk .grub-install says what everything was successfull, but after restart never changes. Tried to run grub-install 2 times.
Where can be a problem? Or I need to start download F9-full?
Thanks.
MKas wrote:
I had WinXP & F9. Yesterday I tried to reinstall WinXP and it was successfull after partition hide with gparted.
But now I have problem with MBR. I hadn't any linux cd/dvd so downloaded F9 KDE Live (Full linux dvd download about 36 hours). I run F9 KDE Live and try to fix MBR. 1 - mount boot disk as /boot, 2
- grub-install /dev/my_boot_disk .grub-install says what everything
was successfull, but after restart never changes. Tried to run grub-install 2 times.
Where can be a problem? Or I need to start download F9-full?> Thanks.
Do not mount the disk as /boot. Instead try something like this:
mkdir /mnt/tmp mount <F9 root partition> /mnt/tmp chroot /mnt/tmp
If /boot is on a separate partition, run "mount /boot".
Run grub-install.
Mikkel
On Fri, 10 Aug 2007 18:07:13 -0300 "André Costa" blueser@gmail.com wrote:
BUT... I need this machine to dual-boot to Windows XP (still addicted to some Windows-only games =( ). XP setup CD hangs just after showing "examining hardware configuration" or something like that. It doesn't really hangs, it just switches to a blank screen and sits there forever (I already left it there for more than 15min to no avail). Keyboard is responsive and HD led stays on. CTRL+ALT+DEL reboots as expected.
I had exactly this problem with a machine with nvidia chipset and sata disks. Turned out if there was an ext3 partition anywhere on any of the disks the XP installer acted exactly as you describe. It would hang much faster than I could even hit the function key to tell it I had a driver disk.
At some point I needed to reinstall everything from scratch, so I erased all the partitions on all the disks, installed Windows XP first, then installed linux. It works fine now - it was just the installer barfing.