users July 2007

users@lists.stg.fedoraproject.org

541 participants
1017 discussions

SATA optical drives
by David Fletcher 14 Jul '22

14 Jul '22

I'm currently running FC5, will probably upgrade to F7 in a couple of months. Unfortunately my CD/DVD rewriter appears to have died, before it's even seen a dual layer disk :'( SATA hard drives run without problems for me, but now that SATA optical drives are starting to appear in the shops, would it be OK to buy one of these and get rid of another wide ribbon cable? Is anybody already running them with Fedora? Thanks for any advice/experiences. Dave F

5 4

Changing date with procmail
by Michael A. Peters 08 Jun '22

08 Jun '22

Anyone know of a procmail recipe to change the date on incoming messages? If the date is in the future by more than 24 hours - I'd like to just change it to the current date. If the date is in the past by more than two weeks - I'd like to just change it to the current date. I'd like to do it in procmail - if someone knows how. I've done some searching, still have some to do. Found some stuff on extracting the date, but not on modifying it if necessary.

5 5

VPN options
by Keith Lofstrom 08 Nov '19

08 Nov '19

I am planning on running a Virtual Private Network from my Fedora firewall out to a UML virtual colo (running RH9) at another site. That site will be the place I present services to the world; httpd, ssh, sftp, smtp. This is to comply with the "no servers" and dynamic ip restrictions on my Comcast connection to the net; if my firewall always drives an outbound connection to the colocation site, I am not worried about changes of ip address, and I am not opening any inbound ports. There are a number of options for the VPN - the most attractive are cipe ( http://sites.inka.de/sites/bigred/devel/cipe.html ) and FreeSwan ( http://www.freeswan.org/ ), though I am told that one can do all this through an ssh tunnel. I would rather have simple and secure than super-duper; I have plenty of bandwidth, and will send outbound http and smtp from the firewall, so the main bandwidth user will be incoming spam/b/b/b/b mail. Anyone have some experiences to share about setting up VPN? Is there anything about either cipe or FreeSwan that is likely to break with FC1 or FC2? Keith -- Keith Lofstrom keithl(a)ieee.org Voice (503)-520-1993 KLIC --- Keith Lofstrom Integrated Circuits --- "Your Ideas in Silicon" Design Contracting in Bipolar and CMOS - Analog, Digital, and Scan ICs

8 8

Problems with 3COM 3C900Combo
by Christian Moller 05 Jun '15

05 Jun '15

Hi all Fedora users, I have just joined this list. I am running the latest Fedora but I can't get my 3C900Combo networking card to work. I can see that the card is installed but no IP-address is asigned to it and I can't set it. So I think that there is a bug in that driver. Any other user out there who have a solution for this? Best regards and thanks, Christian

2 1

RAGE XL Framebuffer
by Yanick Quirion 05 Jun '15

05 Jun '15

Hi all I know that is not a specific question about Fedora, but I can't find answer on the kernel mailing list. Is somebody having server with integrated ATI RAGE XL video card? Is it possible to patch the kernel to support this video card? If I add VGA=791 in my grub.conf, I will have a resolution of 1024x768 which is good, but the display is very slow (especially when the screen is scrolling). If I use I this: "video=aty128fb:1024x768@70" it will not work. I'm using kernel 2.4.22 but I will try 2.6.0-test11 today. If somebody has a patch, a link or anything else that can help me, it will be appreciated. Thanks for your help. Regards, ----------- Yanick Quirion Administrateur Réseau/Network Manager NEOKIMIA INC. Institut de Pharmacologie de Sherbrooke 3e étage (Édifice Z5) 3001 12e avenue Nord Sherbrooke, Québec CANADA J1H 5N4 Tél.: +1 819 820-6040 Direct: +1 819 820-6855 Fax.: +1 819 820-6841 email: Yanick.Quirion(a)neokimia.com

2 1

Soundblaster
by Antonio Montagnani 05 Jun '15

05 Jun '15

I have two similar PC (old Pentium but workin fine) In Pc no.1 I upgraded from RH8 to Fedora and it went fine: Soundblaster is working fine In Pc no.2 I made a fresh installation but in redhat-sound-config Fedora doesn't see any card, that was working on Redhat 9 after soundconfig... Where is the trick?? I assume that my Sounblaster is an old 16...but fine on a router/firewall. Tnx Antonio

4 6

Linux software for Motorola Razor phone?
by William W. Austin 16 Dec '09

16 Dec '09

This may have been answered before, but scanning the archives, I haven't found it (sorry...). My wife recently surprised me with a new gsm phone, a Motorola Razor. I already had the USB cable which works with it (use it with my camcorder), but a web search for Linux software to use the phone with one of my Linux boxen didn't turn up anything. Basically I want to synchronize the calendar and phonebooks, and be able to back up files from the phone to the computer (and restore). I'm running both FC4 and FC5 here so anything which would work with either of those would be great - and much apprecited. Thanks in advance, -- william w. austin waustin(a)speakeasy.net "life is just another phase i'm going through. this time, anyway ..."

10 15

Network problems on new FC4 box - please help.
by William W. Austin 15 Dec '09

15 Dec '09

I had to replace a disk (the one with all of the home directories on it) on an FC3 box, and so I bought a new drive (particulars unimportant). To make a long story short, I decided to put FC4 on this box, and so I installed the new drive and put the root filesystem on it. I still have the old FC3 root drive and can boot to either for comparison... Under FC3, I have no network problems that I can detect; however, under FC4 there are two distinct (related? no idea) problems which have eluded me. I have tried looking up both of these in the archives, but have had no luck (some similar issues, but nothing exactly like either of these unless I missed them). Problem 1: network card goes to sleep. This machine has 2 network cards, both on-board. The 1GB card L(Intel 82540EM) goes to the smartswitch to tolk to the local network, and does not show any problems. The other card (nVidia nForce2) is a 100MB card and talks to the DSL modem. Periodically I cannot connect to the internet at all - or even ping the DSL modem. This happens irregularly but about 5-10 times/day. If I reboot back to FC3, the problem does not occur. Network configurations between the two (FC3/FC4) are as identical as I can make them. The first few times the problem occurs, sometimes retarting networking works, but eventually a full sys reboot is the only thing which works. Problem 2: slow local network. Under FC3 throughput on the LOCAL network (1GB lan) is very fast. Under FC4, the best I have seen is ONE transfer of about 1.2 MB/s - and throughput drops to as low as 50-75KB/s at times. Again, this does not occur under FC3 but does under FC4. Again the same setup as nearly as I can make it. No workaround found so far. Any suggestions would be greatly appreciated. -- william w. austin waustin(a)speakeasy.net "life is just another phase i'm going through. this time, anyway ..."

6 5

latest selinux policy update errors
by Mark Haney 28 Sep '09

28 Sep '09

Is anyone else seeing these types of failures with the latest selinux updates? libsemanage.semanage_direct_remove: Module dpkg was not found. semodule: Failed on dpkg! error: %trigger(selinux-policy-strict-2.6.4-21.fc7.noarch) scriptlet failed, exit status 1 libsemanage.semanage_direct_remove: Module dpkg was not found. semodule: Failed on dpkg! error: %trigger(selinux-policy-strict-2.6.4-23.fc7.noarch) scriptlet failed, exit status 1 Should I file a bug report? -- Da mihi sis bubulae frustrum assae, solana tuberosa in modo gallico fricta, ac quassum lactatum coagulatum crassum Mark Haney Sr. Systems Administrator ERC Broadband (828) 350-2415 Call (866) ERC-7110 for after hours support

2 1

X and Intel 965
by Jeffrey Ross 22 Oct '08

22 Oct '08

so far the installation of FC6 has gone relatively smoothly albeit some additional learning and bumps due to the 64 bit architecture of this machine. The mother board is an Intel DG965RYCK which uses Intel's 965 express chipset. Based upon what I've been able to find on the web, Intel has released the drivers for this chipset to OSS, although there have been issues as to what Intel actually released and how complete they might be. Regardless I unable to run mplayer (or Realplayer) for that matter without the display first freezing then going black followed by garbage along the bottom of the screen. A Control-Alt-Backspace does not stop X from running. The only way to recover the machine from this point is to reboot the system. I am still able to connect from a remote system, its just the display that has become unstable. lspci -v shows the following for the graphics adapter 00:02.0 VGA compatible controller: Intel Corporation Integrated Graphics Controller (rev 02) (prog-if 00 [VGA]) Subsystem: Intel Corporation Unknown device 514d Flags: bus master, fast devsel, latency 0, IRQ 177 Memory at 50200000 (32-bit, non-prefetchable) [size=1M] Memory at 40000000 (64-bit, prefetchable) [size=256M] I/O ports at 3110 [size=8] Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [d0] Power Management version 2 suggestions would be appreciated. Thanks

4 4

Jump to page: