users July 2013

users@lists.stg.fedoraproject.org

270 participants
417 discussions

Re: Camera panasonic-TZ18
by Patrick Dupre 31 Jul '13

31 Jul '13

Hello, After a very long time I was able to mount it from /dev/sdb1 and copy my files. Not very convenient! Any idea? It work fine from another machine (fedora 18). Regards. =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire de Physico-Chimie de l'Atmosphère | | Université du Littoral-Côte d'Opale | | Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44 189A, avenue Maurice Schumann | | 59140 Dunkerque, France ===========================================================================

1 0

Re: Camera panasonic-TZ18
by Patrick Dupre 31 Jul '13

31 Jul '13

Thank, Here it is The camera says connexion to PC in progress, and it takes a very long time before it disappears. In addition, if I try to add the camera manually from digikam, there is not model showing up. It looks like that I need to install some drivers. Aug 1 01:00:02 sophocle systemd-udevd[11100]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory Aug 1 01:00:07 sophocle kernel: [11896.611096] usb 1-6: new high-speed USB device number 7 using ehci-pci Aug 1 01:00:07 sophocle kernel: [11896.728118] usb 1-6: New USB device found, idVendor=04da, idProduct=2372 Aug 1 01:00:07 sophocle kernel: [11896.728127] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 1 01:00:07 sophocle kernel: [11896.728131] usb 1-6: Product: DMC-TZ18 Aug 1 01:00:07 sophocle kernel: [11896.728135] usb 1-6: Manufacturer: Panasonic Aug 1 01:00:07 sophocle kernel: [11896.728138] usb 1-6: SerialNumber: 0000000000000000006F1302150801 Aug 1 01:00:07 sophocle kernel: [11896.728801] usb-storage 1-6:1.0: USB Mass Storage device detected Aug 1 01:00:07 sophocle kernel: [11896.733248] usb-storage 1-6:1.0: Quirks match for vid 04da pid 2372: 90 Aug 1 01:00:07 sophocle kernel: [11896.735270] scsi5 : usb-storage 1-6:1.0 Aug 1 01:00:07 sophocle mtp-probe: checking bus 1, device 7: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6" Aug 1 01:00:07 sophocle mtp-probe: bus: 1, device: 7 was not an MTP device Aug 1 01:00:08 sophocle kernel: [11897.738193] scsi 5:0:0:0: Direct-Access MATSHITA DMC-TZ18 0110 PQ: 0 ANSI: 2 Aug 1 01:00:08 sophocle kernel: [11897.738800] sd 5:0:0:0: Attached scsi generic sg2 type 0 Aug 1 01:00:08 sophocle kernel: [11897.740008] sd 5:0:0:0: [sdb] Adjusting the sector count from its reported value: 15523840 Aug 1 01:00:08 sophocle kernel: [11897.740054] sd 5:0:0:0: [sdb] 15523839 512-byte logical blocks: (7.94 GB/7.40 GiB) Aug 1 01:00:08 sophocle kernel: [11897.741035] sd 5:0:0:0: [sdb] Write Protect is on Aug 1 01:00:08 sophocle kernel: [11897.741890] sd 5:0:0:0: [sdb] No Caching mode page present Aug 1 01:00:08 sophocle kernel: [11897.741898] sd 5:0:0:0: [sdb] Assuming drive cache: write through Aug 1 01:00:38 sophocle kernel: [11928.101092] usb 1-6: reset high-speed USB device number 7 using ehci-pci Aug 1 01:01:09 sophocle kernel: [11959.109182] usb 1-6: reset high-speed USB device number 7 using ehci-pci Aug 1 01:01:41 sophocle kernel: [11990.213151] usb 1-6: reset high-speed USB device number 7 using ehci-pci Aug 1 01:02:11 sophocle kernel: [12021.189094] usb 1-6: reset high-speed USB device number 7 using ehci-pci Aug 1 01:02:12 sophocle kernel: [12021.312222] sd 5:0:0:0: [sdb] Adjusting the sector count from its reported value: 15523840 Aug 1 01:02:12 sophocle kernel: [12021.313518] sd 5:0:0:0: [sdb] No Caching mode page present Aug 1 01:02:12 sophocle kernel: [12021.313525] sd 5:0:0:0: [sdb] Assuming drive cache: write through Aug 1 01:02:42 sophocle kernel: [12052.165207] usb 1-6: reset high-speed USB device number 7 using ehci-pci Aug 1 01:03:13 sophocle kernel: [12083.141074] usb 1-6: reset high-speed USB device number 7 using ehci-pci Aug 1 01:03:44 sophocle kernel: [12114.117204] usb 1-6: reset high-speed USB device number 7 using ehci-pci Aug 1 01:04:15 sophocle kernel: [12145.157208] usb 1-6: reset high-speed USB device number 7 using ehci-pci > ----- Original Message ----- > From: Ed Greshko > Sent: 08/01/13 01:02 AM > To: Community support for Fedora users > Subject: Re: Camera panasonic-TZ18 > > On 08/01/13 06:55, Patrick Dupre wrote: > > I connected my camera panasonic DMC-TZ18 > > Bus 001 Device 005: ID 04da:2372 Panasonic (Matsushita) Lumix Camera (Storage mode) > > > > but it does not seem to be seen by the computer. > > no camera been by digicam or shotwell. > > Do I need to install some drivers? > > Watch /var/log/messages as you plug it in. Sounds as if it may be to be accessed as a USB drive. > > -- > Getting tired of non-Fedora discussions and self-serving posts > -- > users mailing list > users(a)lists.fedoraproject.org > To unsubscribe or change subscription options: > https://admin.fedoraproject.org/mailman/listinfo/users > Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct > Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines > Have a question? Ask away: http://ask.fedoraproject.org =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire de Physico-Chimie de l'Atmosphère | | Université du Littoral-Côte d'Opale | | Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44 189A, avenue Maurice Schumann | | 59140 Dunkerque, France ===========================================================================

1 0

howto do test update
by Neal Becker 31 Jul '13

31 Jul '13

I see emacs has been updated to 24.3. I'm pretty sure I don't want it. I have built/installed 24.3 earlier, and found some problems. Specifically, tramp doesn't seem to work (hangs), and I need it. Any thoughts on how I might be able to do a yum update, and then backout if I don't like it? I know yum has history rollback - but that would depend on being able to find the earlier 24.2 rpms. Which are probably gone. Which I find rather annoying.

3 3

F19 Disc Chundering
by Jonathan Allen 31 Jul '13

31 Jul '13

All, Having just installed F19 on a new mcahine, the disc keeps makeing 'reset' noises and puts this in /var/log/messages: Jul 30 18:58:38 brush kernel: [ 3538.326082] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Jul 30 18:58:38 brush kernel: [ 3538.326098] sr 3:0:0:0: CDB: Jul 30 18:58:38 brush kernel: [ 3538.326102] Get event status notification: 4a 01 00 00 10 00 00 00 08 00 Jul 30 18:58:38 brush kernel: [ 3538.326123] ata4.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in Jul 30 18:58:38 brush kernel: [ 3538.326123] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) Jul 30 18:58:38 brush kernel: [ 3538.326129] ata4.00: status: { DRDY } Jul 30 18:58:38 brush kernel: [ 3538.326139] ata4: hard resetting link Jul 30 18:58:38 brush kernel: [ 3538.989992] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Jul 30 18:58:38 brush kernel: [ 3539.007104] ata4.00: configured for PIO0 Jul 30 18:58:38 brush kernel: [ 3539.022994] ata4: EH complete This happens about every 30 seconds. Any idea what is going on? Jonathan

4 4

The state of blu-ray burning in linux is terrible
by Richard Shaw 31 Jul '13

31 Jul '13

DISCLAIMER: Yes I'm whining, but hopefully someone who wants to user their BD writer will find this useful... Well I thought I would try to make my first blu-ray movie from some home movies instead of down converting them to DVD like I have been... Only to find out not only is it currently laborious process, it's actually technically impossible for FOSS. The laborious part is trying to get it into the right format (x264 with very specific settings and separate audio file), but even if you manage that part, there's no UDF 2.5 write support in linux. If you're lucky, you BD player may not care. No problem, I'll worry about that later, I'll just burn a backup of my pictures that were getting to hard to backup on DVD's.... Put in disc... Check! Detected in Brasero... Check! "copy" into new data project... Check! BURN! ejects immediately with no helpful error message... ... skip some time spent googling only to get really mad about the whole cdrkit vs. cdrtools debacle... ... skip spending time getting cdrtools 3.01 to build ... I'm still working on getting the kinks out of that... conflicts with several cdrkit packages (genisoimage, wodim, icedax) Ok! Last resort, do it the PITA way... $ dd if=/dev/zero of=/bdimage.udf bs=2048 count=12219392 $ mkudffs bdimage.udf # sudo mount -t udf -o loop bdimage /mnt/disc currently copying files into the image file... HOPEFULLY brasero will at least burn the image... Richard

4 13

BTRFS using LZO compression over NFS.
by Gary Artim 31 Jul '13

31 Jul '13

question: why does my compression rate change based on the *clients* kernel (i think)? situation: testing using btrfs with lzo, when I run with equal kernels on the server and client I get the same compression (on a 11GB:1.2GB). When I run on a client with a 2.6.x kernel I get (11GB:6GB), same file, all nfs4. btw, I dont get the same speed, 11GB file, server to server, 16secs on btrfs/lzo; 11GB file, client to server 2mins on btrfs/lzo over NFS. has anyone tried or can explain? server: 3.9.9-201.fc18.x86_64 client (in question): 2.6.31.6-2.caos client (get same compression): 3.9.9-201.fc18.x86_64 or 3.9.9-302.fc19.x86_64 thanks for any enlightening thoughts!

1 1

Re: VirtualBox wont run -
by Reindl Harald 31 Jul '13

31 Jul '13

Am 31.07.2013 19:54, schrieb Steven Stern: >>> Reindl: This depends on which repo VirtualBox is installed from. >>> If installed from the repo on VirtualBox.org, then it *does* >>> install a file in /etc/init.d and one manages it through calls to >>> "service", which appropriately run the script with the right >>> parameters, including "setup" >> >> what do you not realize in the fact that /sbin/service is a wrapper >> to systemctl? >> > Yes, I do. But the syntax is a whole lot easier for "service" the syntax is *exactly* the same, only action and service-name are reverse translate this to "service" (hint: it is impossible) systemctl restart dbmail-imapd.service dbmail-lmtpd.service dbmail-pop3d.service dbmail-timsieved.service and if the services you restart have dependencies to each other (After=/Before=) it will happen in the correct order while you have to type "service name restart" in the right order and multiple times

1 0

RE: VirtualBox wont run -
by Alan Gagne 31 Jul '13

31 Jul '13

> Am 31.07.2013 16:45, schrieb Bob Goodwin ~ Zuni: > >/ I awoke around 03:00 and tried whatever new suggestions had come in at that time as well as rebooting, all to no > />/ avail. > />/ > />/ However, systemctl setup vboxdrv.service still does not run: > />/ > />/ [root at box10 <https://admin.fedoraproject.org/mailman/listinfo/users> bobg]# /sbin/service vboxdrv setup > />/ Redirecting to /bin/systemctl setup vboxdrv.service > />/ Unknown operation 'setup'. > />/ > />/ Thanks to all for the help. That help is invaluable to many of us and is what keeps people coming back to Fedora! > / > /etc/init.d/vboxdrv setup > > you *must not* use systemctl or service which is a wrapper for systemctl > the times where a service can have whatever actions are gone with systemd Not entirely true with regards to using service. This is on my F19 box. [root@dw-agagne ~]# uname -r 3.10.3-300.fc19.x86_64 [dw-agagne ~]# service vboxdrv Usage: /etc/init.d/vboxdrv {start|stop|stop_vms|restart|force-reload|status|setup} [dw-agagne ~]# service vboxdrv setup Stopping VirtualBox kernel modules [ OK ] Uninstalling old VirtualBox DKMS kernel modulesError! There are no instances of module: vboxhost 4.2.16 located in the DKMS tree. Error! There are no instances of module: vboxhost 4.2.16 located in the DKMS tree. [ OK ] Trying to register the VirtualBox kernel modules using DKMS[ OK ] Starting VirtualBox kernel modules [ OK ] [dw-agagne ~]# service vboxdrv status VirtualBox kernel modules (vboxdrv, vboxnetflt, vboxnetadp, vboxpci) are loaded. Where Bob has a problem with vboxdrv is that it does not exist. It appears he has gotten virtualbox from the rpmfusion repo. vboxdrv comes with what is packaged from the virtualbox.org repo. [dw-agagne ~]# yum repolist Loaded plugins: langpacks, refresh-packagekit repo id repo name status adobe-linux-i386 Adobe Systems Incorporated 17 adobe-linux-x86_64 Adobe Systems Incorporated 2 fedora/19/x86_64 Fedora 19 - x86_64 36,253 google-chrome google-chrome 3 rpmfusion-free/19/x86_64 RPM Fusion for Fedora 19 - Free 462 rpmfusion-free-updates/19/x86_64 RPM Fusion for Fedora 19 - Free - Updates 96 rpmfusion-nonfree/19/x86_64 RPM Fusion for Fedora 19 - Nonfree 219 rpmfusion-nonfree-updates/19/x86_64 RPM Fusion for Fedora 19 - Nonfree - Updates 90 updates/19/x86_64 Fedora 19 - x86_64 - Updates 9,730 virtualbox/19/x86_64 [dw-agagne ~]# yum provides "*/vboxdrv" VirtualBox-4.2-4.2.8_83876_fedora18-1.x86_64 : Oracle VM VirtualBox Repo : virtualbox Matched from: Filename : /etc/rc.d/init.d/vboxdrv Filename : /usr/share/virtualbox/src/vboxhost/vboxdrv Alan

1 0

Disable PCI devices via systemd
by Raman Gupta 31 Jul '13

31 Jul '13

I have an Intel motherboard sound card, and twoHDMI audio sound cards provided by each of my ATI video cards: # lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation Patsburg High Definition Audio Controller (rev 05) 01:00.1 Audio device: ATI Technologies Inc Device aaa0 02:00.1 Audio device: ATI Technologies Inc Device aaa0 I don't have anything plugged into the ATI HDMI ports so I want to disable those devices, as I get annoying error messages in KDE at startup time and periodically in /var/log/messages. For example: [ 13.018758] ALSA sound/pci/hda/hda_eld.c:334 HDMI: ELD buf size is 0, force 128 [ 13.018772] ALSA sound/pci/hda/hda_eld.c:351 HDMI: invalid ELD data byte 0 I cannot blacklist the module, because the "snd_hda_intel" module that drives the Intel sound card on my motherboardalso recognizes the ATI cards, according to lspci-v. The following solution does workperfectly: # echo 1 > /sys/devices/pci0000:00/0000:00:02.0/0000:01:00.1/remove # echo 1 > /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.1/remove In the old days, the above two lines would go into rc.local. What is the systemd way to not create those devices? Or is there an alternate approach to turn off the HDMI sound cards on the ATI cards? Regards, Raman

4 8

yum expected to work in rescue mode on install DVD?
by Richard Shaw 31 Jul '13

31 Jul '13

After a failed fedup upgrade from F18 to 19 I was left with a broken system... No problem, I figured, I would just boot a F19 install DVD and go into rescue mode and fix things using "yum --installroot=..." After booting into rescue mode I tried running yum, and the program seems to be there, but it complained about not being able to import the yummain module. Is yum expected to work in rescue mode? I would think so... I ended up using rpm directly and hunting down the dependencies one at a time until I had a working yum in the chroot. Thanks, Richard

3 4

← Newer
1
2
3
4
5
6
7
8
...
42
Older →

Jump to page: