Hello!
I've used a lot of time trying to get my custom Xen pv_ops dom0 kernel working with virt-install and/or virt-manager on Fedora 10, and now it seems I got things working.
If you want to play with this you need:
1) New enough pv_ops dom0 kernel (2.6.29-rc8 or newer) so it has /sys/hypervisor support included - Compile with CONFIG_HIGHPTE=n since it seems to be broken still 2) libvirt 0.6.1 and related packages from Fedora 10 updates-testing
In addition to those I'm using Xen 3.3.1-9 packages from rawhide/F11 rebuilt for F10.
With the older Fedora 10 libvirt packages libvirtd was crashing often for me, and I had some other issues with virt-install console window not opening but stalling etc..
Today I was able to run the following on Fedora 10 32bit PAE pv_ops dom0:
- CentOS 5.3 32bit PAE PV domU - Fedora 10 32bit PAE PV domU - Use virt-install to install Fedora 10 32bit PAE PV domU (using custom kickstart to force PAE kernel installation to avoid the anaconda BUG which installs wrong non-PAE kernel as a default).
Fedora 11 (rawhide) installation most probably works too.
I'm using LVM volumes for domU disks (tap:aio is not yet supported by pv_ops dom0 kernel).
Network seems to work after running "ifdown eth0 && ifup eth0" on the guest.. dunno why that's needed. That's something to figure out later:)
Graphical domU console works with virt-viewer and virt-install during installation.
Issues: - virt-manager complains about default network (virbr0) being inactive and asks if I want to start it. If I click Yes, then I get error: "libvirtError: cannot create bridge 'virbr0': File exists"
virbr0 works just fine with virt-install. So dunno what's the problem with that.. have to look into that later.
Thanks to everyone involved for helping me with this!
-- Pasi
On Tue, Mar 24, 2009 at 09:25:02PM +0200, Pasi K?rkk?inen wrote:
Hello!
I've used a lot of time trying to get my custom Xen pv_ops dom0 kernel working with virt-install and/or virt-manager on Fedora 10, and now it seems I got things working.
If you want to play with this you need:
- New enough pv_ops dom0 kernel (2.6.29-rc8 or newer) so it has /sys/hypervisor support included
- Compile with CONFIG_HIGHPTE=n since it seems to be broken still
- libvirt 0.6.1 and related packages from Fedora 10 updates-testing
In addition to those I'm using Xen 3.3.1-9 packages from rawhide/F11 rebuilt for F10.
With the older Fedora 10 libvirt packages libvirtd was crashing often for me, and I had some other issues with virt-install console window not opening but stalling etc..
Today I was able to run the following on Fedora 10 32bit PAE pv_ops dom0:
- CentOS 5.3 32bit PAE PV domU
- Fedora 10 32bit PAE PV domU
- Use virt-install to install Fedora 10 32bit PAE PV domU (using custom kickstart
to force PAE kernel installation to avoid the anaconda BUG which installs wrong non-PAE kernel as a default).
Fedora 11 (rawhide) installation most probably works too.
FYI, I've just testing i686 and x86_64 Fedora 11 guest installs on a RHEL5 Xen host and they both work flawlessly out of the box - including a sane mouse pointer running in absolute, so no dual-cursor problems, and installing correect PAE kernels
Issues:
- virt-manager complains about default network (virbr0) being inactive and
asks if I want to start it. If I click Yes, then I get error: "libvirtError: cannot create bridge 'virbr0': File exists"
Possibly due to old 0.5.x libvirtd having crashed & left the network running. Since you've now upgraded to 0.6.1 libvirt, it is capable of noticing that the network is already runniing upon startup. So future crashes will recover better.
Daniel
On Tue, Mar 24, 2009 at 07:28:46PM +0000, Daniel P. Berrange wrote:
On Tue, Mar 24, 2009 at 09:25:02PM +0200, Pasi K?rkk?inen wrote:
Hello!
I've used a lot of time trying to get my custom Xen pv_ops dom0 kernel working with virt-install and/or virt-manager on Fedora 10, and now it seems I got things working.
If you want to play with this you need:
- New enough pv_ops dom0 kernel (2.6.29-rc8 or newer) so it has /sys/hypervisor support included
- Compile with CONFIG_HIGHPTE=n since it seems to be broken still
- libvirt 0.6.1 and related packages from Fedora 10 updates-testing
In addition to those I'm using Xen 3.3.1-9 packages from rawhide/F11 rebuilt for F10.
With the older Fedora 10 libvirt packages libvirtd was crashing often for me, and I had some other issues with virt-install console window not opening but stalling etc..
Today I was able to run the following on Fedora 10 32bit PAE pv_ops dom0:
- CentOS 5.3 32bit PAE PV domU
- Fedora 10 32bit PAE PV domU
- Use virt-install to install Fedora 10 32bit PAE PV domU (using custom kickstart
to force PAE kernel installation to avoid the anaconda BUG which installs wrong non-PAE kernel as a default).
Fedora 11 (rawhide) installation most probably works too.
FYI, I've just testing i686 and x86_64 Fedora 11 guest installs on a RHEL5 Xen host and they both work flawlessly out of the box - including a sane mouse pointer running in absolute, so no dual-cursor problems, and installing correect PAE kernels
And I just tested installing CentOS 5.3 PV domU with virt-manager on F10 dom0, and it was successful aswell!
Issues:
- virt-manager complains about default network (virbr0) being inactive and
asks if I want to start it. If I click Yes, then I get error: "libvirtError: cannot create bridge 'virbr0': File exists"
Possibly due to old 0.5.x libvirtd having crashed & left the network running. Since you've now upgraded to 0.6.1 libvirt, it is capable of noticing that the network is already runniing upon startup. So future crashes will recover better.
Yeah, rebooting the box fixed the problem and virt-manager works now.
Thanks!
-- Pasi
On Tue, Mar 24, 2009 at 07:28:46PM +0000, Daniel P. Berrange wrote:
On Tue, Mar 24, 2009 at 09:25:02PM +0200, Pasi K?rkk?inen wrote:
Hello!
I've used a lot of time trying to get my custom Xen pv_ops dom0 kernel working with virt-install and/or virt-manager on Fedora 10, and now it seems I got things working.
If you want to play with this you need:
- New enough pv_ops dom0 kernel (2.6.29-rc8 or newer) so it has /sys/hypervisor support included
- Compile with CONFIG_HIGHPTE=n since it seems to be broken still
- libvirt 0.6.1 and related packages from Fedora 10 updates-testing
In addition to those I'm using Xen 3.3.1-9 packages from rawhide/F11 rebuilt for F10.
With the older Fedora 10 libvirt packages libvirtd was crashing often for me, and I had some other issues with virt-install console window not opening but stalling etc..
Today I was able to run the following on Fedora 10 32bit PAE pv_ops dom0:
- CentOS 5.3 32bit PAE PV domU
- Fedora 10 32bit PAE PV domU
- Use virt-install to install Fedora 10 32bit PAE PV domU (using custom kickstart
to force PAE kernel installation to avoid the anaconda BUG which installs wrong non-PAE kernel as a default).
Fedora 11 (rawhide) installation most probably works too.
FYI, I've just testing i686 and x86_64 Fedora 11 guest installs on a RHEL5 Xen host and they both work flawlessly out of the box - including a sane mouse pointer running in absolute, so no dual-cursor problems, and installing correect PAE kernels
Replying to old thread.. today I tried installing F11 i386 domU with virt-install on centos 5.3 x86_64 dom0, and it doesn't seem to work..
The graphical VNC console doesn't show up, and it seems the domU kernel crashes.
x86_64 domU installation on x86_64 dom0 seems to work though. Are you sure i386 on x86_64 worked for you?
-- Pasi
On Tue, Jul 28, 2009 at 12:39:17AM +0300, Pasi K?rkk?inen wrote:
On Tue, Mar 24, 2009 at 07:28:46PM +0000, Daniel P. Berrange wrote:
On Tue, Mar 24, 2009 at 09:25:02PM +0200, Pasi K?rkk?inen wrote:
Hello!
I've used a lot of time trying to get my custom Xen pv_ops dom0 kernel working with virt-install and/or virt-manager on Fedora 10, and now it seems I got things working.
If you want to play with this you need:
- New enough pv_ops dom0 kernel (2.6.29-rc8 or newer) so it has /sys/hypervisor support included
- Compile with CONFIG_HIGHPTE=n since it seems to be broken still
- libvirt 0.6.1 and related packages from Fedora 10 updates-testing
In addition to those I'm using Xen 3.3.1-9 packages from rawhide/F11 rebuilt for F10.
With the older Fedora 10 libvirt packages libvirtd was crashing often for me, and I had some other issues with virt-install console window not opening but stalling etc..
Today I was able to run the following on Fedora 10 32bit PAE pv_ops dom0:
- CentOS 5.3 32bit PAE PV domU
- Fedora 10 32bit PAE PV domU
- Use virt-install to install Fedora 10 32bit PAE PV domU (using custom kickstart
to force PAE kernel installation to avoid the anaconda BUG which installs wrong non-PAE kernel as a default).
Fedora 11 (rawhide) installation most probably works too.
FYI, I've just testing i686 and x86_64 Fedora 11 guest installs on a RHEL5 Xen host and they both work flawlessly out of the box - including a sane mouse pointer running in absolute, so no dual-cursor problems, and installing correect PAE kernels
Replying to old thread.. today I tried installing F11 i386 domU with virt-install on centos 5.3 x86_64 dom0, and it doesn't seem to work..
The graphical VNC console doesn't show up, and it seems the domU kernel crashes.
x86_64 domU installation on x86_64 dom0 seems to work though. Are you sure i386 on x86_64 worked for you?
Yep, just checked my RHEL-5 box and it has this config
name = "f11i686xen" uuid = "1417ac4b-bd9a-61cc-6faf-8e842cd72cb9" maxmem = 900 memory = 500 vcpus = 1 bootloader = "/usr/bin/pygrub" on_poweroff = "destroy" on_reboot = "restart" on_crash = "restart" vfb = [ "type=vnc,vncunused=1" ] disk = [ "tap:aio:/var/lib/xen/images/f11i686.img,xvda,w" ] vif = [ "mac=00:16:3e:71:38:63,bridge=xenbr0" ]
And the guest disk is fully instlaled
# ls -lhs /var/lib/xen/images/f11i686.img 3.4G -rwxr-xr-x 1 root root 5.1G Jun 4 06:33 /var/lib/xen/images/f11i686.img
FWIW, the guest kernel here is 2.6.29-0.258.rc8.git2.fc11.i686.PAE
So its possible things have changed since I did my install ....
Also my x86_64 host only has 2 GB of RAM, so if there's any bugs with i686 guests at the >4GB phys RAM mark I wouldn't have seen them
Daniel
On Mon, Jul 27, 2009 at 10:45:06PM +0100, Daniel P. Berrange wrote:
On Tue, Jul 28, 2009 at 12:39:17AM +0300, Pasi K?rkk?inen wrote:
On Tue, Mar 24, 2009 at 07:28:46PM +0000, Daniel P. Berrange wrote:
On Tue, Mar 24, 2009 at 09:25:02PM +0200, Pasi K?rkk?inen wrote:
Hello!
I've used a lot of time trying to get my custom Xen pv_ops dom0 kernel working with virt-install and/or virt-manager on Fedora 10, and now it seems I got things working.
If you want to play with this you need:
- New enough pv_ops dom0 kernel (2.6.29-rc8 or newer) so it has /sys/hypervisor support included
- Compile with CONFIG_HIGHPTE=n since it seems to be broken still
- libvirt 0.6.1 and related packages from Fedora 10 updates-testing
In addition to those I'm using Xen 3.3.1-9 packages from rawhide/F11 rebuilt for F10.
With the older Fedora 10 libvirt packages libvirtd was crashing often for me, and I had some other issues with virt-install console window not opening but stalling etc..
Today I was able to run the following on Fedora 10 32bit PAE pv_ops dom0:
- CentOS 5.3 32bit PAE PV domU
- Fedora 10 32bit PAE PV domU
- Use virt-install to install Fedora 10 32bit PAE PV domU (using custom kickstart
to force PAE kernel installation to avoid the anaconda BUG which installs wrong non-PAE kernel as a default).
Fedora 11 (rawhide) installation most probably works too.
FYI, I've just testing i686 and x86_64 Fedora 11 guest installs on a RHEL5 Xen host and they both work flawlessly out of the box - including a sane mouse pointer running in absolute, so no dual-cursor problems, and installing correect PAE kernels
Replying to old thread.. today I tried installing F11 i386 domU with virt-install on centos 5.3 x86_64 dom0, and it doesn't seem to work..
The graphical VNC console doesn't show up, and it seems the domU kernel crashes.
x86_64 domU installation on x86_64 dom0 seems to work though. Are you sure i386 on x86_64 worked for you?
Yep, just checked my RHEL-5 box and it has this config
name = "f11i686xen" uuid = "1417ac4b-bd9a-61cc-6faf-8e842cd72cb9" maxmem = 900 memory = 500 vcpus = 1 bootloader = "/usr/bin/pygrub" on_poweroff = "destroy" on_reboot = "restart" on_crash = "restart" vfb = [ "type=vnc,vncunused=1" ] disk = [ "tap:aio:/var/lib/xen/images/f11i686.img,xvda,w" ] vif = [ "mac=00:16:3e:71:38:63,bridge=xenbr0" ]
Nothing weird here.. My guest has 1 vcpu aswell, and I'm using vnc.
And the guest disk is fully instlaled
# ls -lhs /var/lib/xen/images/f11i686.img 3.4G -rwxr-xr-x 1 root root 5.1G Jun 4 06:33 /var/lib/xen/images/f11i686.img
FWIW, the guest kernel here is 2.6.29-0.258.rc8.git2.fc11.i686.PAE
So its possible things have changed since I did my install ....
Default kernel in Fedora 11 is: kernel-PAE-2.6.29.4-167.fc11.i686.rpm
Also my x86_64 host only has 2 GB of RAM, so if there's any bugs with i686 guests at the >4GB phys RAM mark I wouldn't have seen them
My guests were using 512 MB and 1024 MB of RAM..
I tried again now, and yes, F10 and F11 i386 guests fail on CentOS 5.3 x86_64 dom0 with domU kernel crashes like this:
http://pasik.reaktio.net/fedora/fedora10-32b-xen-domu-on-centos53-64b-dom0-i... http://pasik.reaktio.net/fedora/fedora11-32b-xen-domu-on-centos53-64b-dom0-c...
Checking if this processor honours the WP bit even in supervisor mode...Ok. 1 multicall(s) failed: cpu 0 Pid: 0, comm: swapper Not tainted 2.6.29.4-167.fc11.i686.PAE #1 Call Trace: [<c0714be7>] ? printk+0x14/0x1d [<c0405020>] xen_mc_flush+0x12d/0x1f9 [<c0405880>] xen_mc_issue+0x19/0x4d [<c0406293>] xen_set_pud_hyper+0x79/0x81 [<c040632a>] xen_set_pud+0x8f/0x95 [<c04220e0>] zap_low_mappings+0x2d/0x42 [<c091c917>] mem_init+0x2a0/0x2a8 [<c0906828>] start_kernel+0x264/0x313 [<c090609d>] i386_start_kernel+0x8c/0x97 [<c090c351>] xen_start_kernel+0x7f9/0x802 ------------[ cut here ]------------ kernel BUG at arch/x86/xen/multicalls.c:180! invalid opcode: 0000 [#1] SMP
Hmm.. I wonder what's causing this.
Can you test if it works for you?
I used virt-install like this: virt-install --debug -n testvm -r 512 --vcpus=1 -f /dev/VolGroup00/testvm_disk --vnc -p -l "ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/releases/11/Fedora/i386/os"
The graphical VNC console newer shows up, and when I run "xm console testvm" I see that kernel crash.
-- Pasi
On Tue, Jul 28, 2009 at 01:11:11AM +0300, Pasi Kärkkäinen wrote:
On Mon, Jul 27, 2009 at 10:45:06PM +0100, Daniel P. Berrange wrote:
On Tue, Jul 28, 2009 at 12:39:17AM +0300, Pasi K?rkk?inen wrote:
On Tue, Mar 24, 2009 at 07:28:46PM +0000, Daniel P. Berrange wrote:
On Tue, Mar 24, 2009 at 09:25:02PM +0200, Pasi K?rkk?inen wrote:
Hello!
I've used a lot of time trying to get my custom Xen pv_ops dom0 kernel working with virt-install and/or virt-manager on Fedora 10, and now it seems I got things working.
If you want to play with this you need:
- New enough pv_ops dom0 kernel (2.6.29-rc8 or newer) so it has /sys/hypervisor support included
- Compile with CONFIG_HIGHPTE=n since it seems to be broken still
- libvirt 0.6.1 and related packages from Fedora 10 updates-testing
In addition to those I'm using Xen 3.3.1-9 packages from rawhide/F11 rebuilt for F10.
With the older Fedora 10 libvirt packages libvirtd was crashing often for me, and I had some other issues with virt-install console window not opening but stalling etc..
Today I was able to run the following on Fedora 10 32bit PAE pv_ops dom0:
- CentOS 5.3 32bit PAE PV domU
- Fedora 10 32bit PAE PV domU
- Use virt-install to install Fedora 10 32bit PAE PV domU (using custom kickstart
to force PAE kernel installation to avoid the anaconda BUG which installs wrong non-PAE kernel as a default).
Fedora 11 (rawhide) installation most probably works too.
FYI, I've just testing i686 and x86_64 Fedora 11 guest installs on a RHEL5 Xen host and they both work flawlessly out of the box - including a sane mouse pointer running in absolute, so no dual-cursor problems, and installing correect PAE kernels
Replying to old thread.. today I tried installing F11 i386 domU with virt-install on centos 5.3 x86_64 dom0, and it doesn't seem to work..
The graphical VNC console doesn't show up, and it seems the domU kernel crashes.
x86_64 domU installation on x86_64 dom0 seems to work though. Are you sure i386 on x86_64 worked for you?
Yep, just checked my RHEL-5 box and it has this config
name = "f11i686xen" uuid = "1417ac4b-bd9a-61cc-6faf-8e842cd72cb9" maxmem = 900 memory = 500 vcpus = 1 bootloader = "/usr/bin/pygrub" on_poweroff = "destroy" on_reboot = "restart" on_crash = "restart" vfb = [ "type=vnc,vncunused=1" ] disk = [ "tap:aio:/var/lib/xen/images/f11i686.img,xvda,w" ] vif = [ "mac=00:16:3e:71:38:63,bridge=xenbr0" ]
Nothing weird here.. My guest has 1 vcpu aswell, and I'm using vnc.
And the guest disk is fully instlaled
# ls -lhs /var/lib/xen/images/f11i686.img 3.4G -rwxr-xr-x 1 root root 5.1G Jun 4 06:33 /var/lib/xen/images/f11i686.img
FWIW, the guest kernel here is 2.6.29-0.258.rc8.git2.fc11.i686.PAE
So its possible things have changed since I did my install ....
Default kernel in Fedora 11 is: kernel-PAE-2.6.29.4-167.fc11.i686.rpm
Also my x86_64 host only has 2 GB of RAM, so if there's any bugs with i686 guests at the >4GB phys RAM mark I wouldn't have seen them
My guests were using 512 MB and 1024 MB of RAM..
I tried again now, and yes, F10 and F11 i386 guests fail on CentOS 5.3 x86_64 dom0 with domU kernel crashes like this:
http://pasik.reaktio.net/fedora/fedora10-32b-xen-domu-on-centos53-64b-dom0-i... http://pasik.reaktio.net/fedora/fedora11-32b-xen-domu-on-centos53-64b-dom0-c...
Checking if this processor honours the WP bit even in supervisor mode...Ok. 1 multicall(s) failed: cpu 0 Pid: 0, comm: swapper Not tainted 2.6.29.4-167.fc11.i686.PAE #1 Call Trace: [<c0714be7>] ? printk+0x14/0x1d [<c0405020>] xen_mc_flush+0x12d/0x1f9 [<c0405880>] xen_mc_issue+0x19/0x4d [<c0406293>] xen_set_pud_hyper+0x79/0x81 [<c040632a>] xen_set_pud+0x8f/0x95 [<c04220e0>] zap_low_mappings+0x2d/0x42 [<c091c917>] mem_init+0x2a0/0x2a8 [<c0906828>] start_kernel+0x264/0x313 [<c090609d>] i386_start_kernel+0x8c/0x97 [<c090c351>] xen_start_kernel+0x7f9/0x802 ------------[ cut here ]------------ kernel BUG at arch/x86/xen/multicalls.c:180! invalid opcode: 0000 [#1] SMP
Hmm.. I wonder what's causing this.
Can you test if it works for you?
I used virt-install like this: virt-install --debug -n testvm -r 512 --vcpus=1 -f /dev/VolGroup00/testvm_disk --vnc -p -l "ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/releases/11/Fedora/i386/os"
The graphical VNC console newer shows up, and when I run "xm console testvm" I see that kernel crash.
Actually I think I just figured it out..
It's this RHEL5 bug: https://bugzilla.redhat.com/show_bug.cgi?id=467698
I upgraded kernel+xen to -159.el5 and now both F10 and F11 32b domUs work and install OK on x86_64 host/dom0.
-- Pasi
On Tue, Jul 28, 2009 at 01:39:26AM +0300, Pasi K?rkk?inen wrote:
On Tue, Jul 28, 2009 at 01:11:11AM +0300, Pasi Kärkkäinen wrote:
On Mon, Jul 27, 2009 at 10:45:06PM +0100, Daniel P. Berrange wrote:
On Tue, Jul 28, 2009 at 12:39:17AM +0300, Pasi K?rkk?inen wrote:
x86_64 domU installation on x86_64 dom0 seems to work though. Are you sure i386 on x86_64 worked for you?
Yep, just checked my RHEL-5 box and it has this config
name = "f11i686xen" uuid = "1417ac4b-bd9a-61cc-6faf-8e842cd72cb9" maxmem = 900 memory = 500 vcpus = 1 bootloader = "/usr/bin/pygrub" on_poweroff = "destroy" on_reboot = "restart" on_crash = "restart" vfb = [ "type=vnc,vncunused=1" ] disk = [ "tap:aio:/var/lib/xen/images/f11i686.img,xvda,w" ] vif = [ "mac=00:16:3e:71:38:63,bridge=xenbr0" ]
Nothing weird here.. My guest has 1 vcpu aswell, and I'm using vnc.
And the guest disk is fully instlaled
# ls -lhs /var/lib/xen/images/f11i686.img 3.4G -rwxr-xr-x 1 root root 5.1G Jun 4 06:33 /var/lib/xen/images/f11i686.img
FWIW, the guest kernel here is 2.6.29-0.258.rc8.git2.fc11.i686.PAE
So its possible things have changed since I did my install ....
Default kernel in Fedora 11 is: kernel-PAE-2.6.29.4-167.fc11.i686.rpm
Also my x86_64 host only has 2 GB of RAM, so if there's any bugs with i686 guests at the >4GB phys RAM mark I wouldn't have seen them
My guests were using 512 MB and 1024 MB of RAM..
I tried again now, and yes, F10 and F11 i386 guests fail on CentOS 5.3 x86_64 dom0 with domU kernel crashes like this:
http://pasik.reaktio.net/fedora/fedora10-32b-xen-domu-on-centos53-64b-dom0-i... http://pasik.reaktio.net/fedora/fedora11-32b-xen-domu-on-centos53-64b-dom0-c...
Checking if this processor honours the WP bit even in supervisor mode...Ok. 1 multicall(s) failed: cpu 0 Pid: 0, comm: swapper Not tainted 2.6.29.4-167.fc11.i686.PAE #1 Call Trace: [<c0714be7>] ? printk+0x14/0x1d [<c0405020>] xen_mc_flush+0x12d/0x1f9 [<c0405880>] xen_mc_issue+0x19/0x4d [<c0406293>] xen_set_pud_hyper+0x79/0x81 [<c040632a>] xen_set_pud+0x8f/0x95 [<c04220e0>] zap_low_mappings+0x2d/0x42 [<c091c917>] mem_init+0x2a0/0x2a8 [<c0906828>] start_kernel+0x264/0x313 [<c090609d>] i386_start_kernel+0x8c/0x97 [<c090c351>] xen_start_kernel+0x7f9/0x802 ------------[ cut here ]------------ kernel BUG at arch/x86/xen/multicalls.c:180! invalid opcode: 0000 [#1] SMP
Hmm.. I wonder what's causing this.
Can you test if it works for you?
I used virt-install like this: virt-install --debug -n testvm -r 512 --vcpus=1 -f /dev/VolGroup00/testvm_disk --vnc -p -l "ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/releases/11/Fedora/i386/os"
The graphical VNC console newer shows up, and when I run "xm console testvm" I see that kernel crash.
Actually I think I just figured it out..
It's this RHEL5 bug: https://bugzilla.redhat.com/show_bug.cgi?id=467698
Ah yes, I probably had a internal 5.3 snapshot kernel installed which would have that fix
Daniel
xen@lists.stg.fedoraproject.org