Help.
Can someone point me to a set of instructions that will help me setup FDS 1.1.2 so that Solaris 10 clients will work with it?
I cannot setup the FDS properly using the instructions below as it seems to be missing some information.
http://directory.fedoraproject.org/wiki/Howto:SolarisClient
Please advice.
Regards,
Jerome
Hi...
I have working this in one way... i mean...
If i change a password for an account on ADS this is change on FDS... (good)
But it is possible to do it in the other way?, i mean change the password on FDS and then this is change on ADS?
Where I have to set the FDS to connect with the ADS in order to change the passwords?
Thanks in advance!!!
Michael.-
Michael Fernández M wrote:
Hi...
I have working this in one way... i mean...
If i change a password for an account on ADS this is change on FDS... (good)
But it is possible to do it in the other way?, i mean change the password on FDS and then this is change on ADS?
Where I have to set the FDS to connect with the ADS in order to change the passwords?
It should just work. What problems do you see? Any messages in the error log? One thing is that AD requires password changes to be sent over a secure channel, which means you'll need to use TLS/SSL.
Thanks in advance!!!
Michael.-
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
On Thu, 2008-09-25 at 14:13 -0600, Rich Megginson wrote:
Michael Fernández M wrote:
Hi...
I have working this in one way... i mean...
If i change a password for an account on ADS this is change on FDS... (good)
But it is possible to do it in the other way?, i mean change the password on FDS and then this is change on ADS?
Where I have to set the FDS to connect with the ADS in order to change the passwords?
It should just work. What problems do you see? Any messages in the error log? One thing is that AD requires password changes to be sent over a secure channel, which means you'll need to use TLS/SSL.
Hi.. (thanks for reply...)
when i run a :
/usr/lib/mozldap/ldapsearch -Z -p 636 -P /etc/dirsrv/slapd-justo/cert8.db -h ads_ip -D "cn=administrator,cn=users,dc=ads,dc=cl" -w lol -s base -b "ou=users,dc=ads,dc=cl" "objectclass=*" it connect to the ADS by ssl (636)
but when i change a pass from FDS, FDS do not change anything on ADS, tshark does not show packets....
that's why i ask where i have to configure FDS to connect with the ADS service....
However in the other way ADS to FDS works without problems....
Thanks!!!
Michael.-
Thanks in advance!!!
Michael.-
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
On Mon, 2008-09-29 at 13:52 -0400, Michael Fernández M wrote:
On Thu, 2008-09-25 at 14:13 -0600, Rich Megginson wrote:
Michael Fernández M wrote:
Hi...
I have working this in one way... i mean...
If i change a password for an account on ADS this is change on FDS... (good)
But it is possible to do it in the other way?, i mean change the password on FDS and then this is change on ADS?
Where I have to set the FDS to connect with the ADS in order to change the passwords?
It should just work. What problems do you see? Any messages in the error log? One thing is that AD requires password changes to be sent over a secure channel, which means you'll need to use TLS/SSL.
Hi.. (thanks for reply...)
when i run a :
/usr/lib/mozldap/ldapsearch -Z -p 636 -P /etc/dirsrv/slapd-justo/cert8.db -h ads_ip -D "cn=administrator,cn=users,dc=ads,dc=cl" -w lol -s base -b "ou=users,dc=ads,dc=cl" "objectclass=*" it connect to the ADS by ssl (636)
but when i change a pass from FDS, FDS do not change anything on ADS, tshark does not show packets....
that's why i ask where i have to configure FDS to connect with the ADS service....
However in the other way ADS to FDS works without problems....
I think i solved this....
I set replica on FDS, but when i change a password (on FDS) for a user that exist on FDS and ADS on the logs i see:
NSMMReplicationPlugin - agmt="cn=windows" (procurador:636): windows_replay_update: failed map dn for modify operation dn="uid=lolo,ou=people,dc=ads,dc=cl"
Any ideas?
Regards!!!
Michael.-
Thanks!!!
Michael.-
Thanks in advance!!!
Michael.-
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
Michael Fernández M wrote:
On Mon, 2008-09-29 at 13:52 -0400, Michael Fernández M wrote:
On Thu, 2008-09-25 at 14:13 -0600, Rich Megginson wrote:
Michael Fernández M wrote:
Hi...
I have working this in one way... i mean...
If i change a password for an account on ADS this is change on FDS... (good)
But it is possible to do it in the other way?, i mean change the password on FDS and then this is change on ADS?
Where I have to set the FDS to connect with the ADS in order to change the passwords?
It should just work. What problems do you see? Any messages in the error log? One thing is that AD requires password changes to be sent over a secure channel, which means you'll need to use TLS/SSL.
Hi.. (thanks for reply...)
when i run a :
/usr/lib/mozldap/ldapsearch -Z -p 636 -P /etc/dirsrv/slapd-justo/cert8.db -h ads_ip -D "cn=administrator,cn=users,dc=ads,dc=cl" -w lol -s base -b "ou=users,dc=ads,dc=cl" "objectclass=*" it connect to the ADS by ssl (636)
but when i change a pass from FDS, FDS do not change anything on ADS, tshark does not show packets....
that's why i ask where i have to configure FDS to connect with the ADS service....
However in the other way ADS to FDS works without problems....
I think i solved this....
I set replica on FDS, but when i change a password (on FDS) for a user that exist on FDS and ADS on the logs i see:
NSMMReplicationPlugin - agmt="cn=windows" (procurador:636): windows_replay_update: failed map dn for modify operation dn="uid=lolo,ou=people,dc=ads,dc=cl"
Any ideas?
Not sure. If you have a user that exists in both FDS and ADS, did they already exist that way before you did the initial sync? If so, the existing user in FDS must have the ntUser objectclass, and must have the attribute ntUserDomainID set to the Windows userid (e.g. the samAccountName). Then try changing something like the description for the user in FDS or ADS to see if it gets synced across. Note that you may have to wait up to 5 minutes for changes to go from ADS to FDS (FDS to ADS changes should happen almost immediately).
See *http://tinyurl.com/4n3yzo for more information *
Regards!!!
Michael.-
Thanks!!!
Michael.-
Thanks in advance!!!
Michael.-
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
On Mon, 2008-09-29 at 14:01 -0600, Rich Megginson wrote:
Michael Fernández M wrote:
On Mon, 2008-09-29 at 13:52 -0400, Michael Fernández M wrote:
On Thu, 2008-09-25 at 14:13 -0600, Rich Megginson wrote:
Michael Fernández M wrote:
Hi...
I have working this in one way... i mean...
If i change a password for an account on ADS this is change on FDS... (good)
But it is possible to do it in the other way?, i mean change the password on FDS and then this is change on ADS?
Where I have to set the FDS to connect with the ADS in order to change the passwords?
It should just work. What problems do you see? Any messages in the error log? One thing is that AD requires password changes to be sent over a secure channel, which means you'll need to use TLS/SSL.
Hi.. (thanks for reply...)
when i run a :
/usr/lib/mozldap/ldapsearch -Z -p 636 -P /etc/dirsrv/slapd-justo/cert8.db -h ads_ip -D "cn=administrator,cn=users,dc=ads,dc=cl" -w lol -s base -b "ou=users,dc=ads,dc=cl" "objectclass=*" it connect to the ADS by ssl (636)
but when i change a pass from FDS, FDS do not change anything on ADS, tshark does not show packets....
that's why i ask where i have to configure FDS to connect with the ADS service....
However in the other way ADS to FDS works without problems....
I think i solved this....
I set replica on FDS, but when i change a password (on FDS) for a user that exist on FDS and ADS on the logs i see:
NSMMReplicationPlugin - agmt="cn=windows" (procurador:636): windows_replay_update: failed map dn for modify operation dn="uid=lolo,ou=people,dc=ads,dc=cl"
Any ideas?
Not sure. If you have a user that exists in both FDS and ADS, did they already exist that way before you did the initial sync? If so, the existing user in FDS must have the ntUser objectclass, and must have the attribute ntUserDomainID set to the Windows userid (e.g. the samAccountName). Then try changing something like the description for the user in FDS or ADS to see if it gets synced across. Note that you may have to wait up to 5 minutes for changes to go from ADS to FDS (FDS to ADS changes should happen almost immediately).
Yes i created the users in a separated way. And the user created on FDS have the ntUserDomainID and ntUser objectclass.
When i modify and attr on ADS this is replicated to FDS, but not on the other way....
See *http://tinyurl.com/4n3yzo for more information
Thanks!
Regards!!!
Michael.-
Thanks!!!
Michael.-
Thanks in advance!!!
Michael.-
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
Jerome, The instructions on the wiki are fairly accurate. I would check Solaris 10 OS patches.
Thanks, -Satish.
Jerome Yanga wrote:
Help.
Can someone point me to a set of instructions that will help me setup FDS 1.1.2 so that Solaris 10 clients will work with it?
I cannot setup the FDS properly using the instructions below as it seems to be missing some information.
http://directory.fedoraproject.org/wiki/Howto:SolarisClient
Please advice.
Regards,
Jerome
-- Fedora-directory-users mailing list Fedora-directory-users@redhat.com https://www.redhat.com/mailman/listinfo/fedora-directory-users
389-users@lists.fedoraproject.org