de-users November 2006

de-users@lists.fedoraproject.org

9 participants
8 discussions

Update auf Fedora Core 6 steht still
by Martin Schoch 17 Nov '06

17 Nov '06

Hi Ich habe mir die DVD Fedora Core 6 gebrannt und wollte nun ein Update von Core 5 machen. Doch Anaconda bleibt bei "Abhängigkeitsüberprüfung der zu installierenden Pakete" stehen - keine Fortschrittsanzeige. Oder geht das wirklich so lange? -- Gruss

2 2

REMINDER: Invitation to the FAD
by Gerold 16 Nov '06

16 Nov '06

REGISTRATION CLOSE ON November, 18th ===================== you'll find it as PDF at http://fedoraproject.org/wiki/FAD?action=AttachFile&do=get&target=invite_FA… First FEDORA AMBASSADORS DAY (FAD EMEA) ======================================= The Fedora Ambassador Day (FAD) is where Ambassadors and other interested members of the Fedora Community come together to plan for future Fedora events and get to know each other. This is your chance to meet other Fedora community members (Ambassadors, Developers) in person. We are proud to invite you to the first FAD in EMEA. The Event will start date ==== December 1st, 2006 (6 pm GMT+1) till December 3rd, 2006 location ======== Werner Mennicke Haus Rührberg e.V. Im Grossfeld 2 D-79639 Grenzach-Wyhlen - Germany - Agenda ====== Friday ------ afternoon: „come together“ Saturday -------- morning: Keynote from a FAMSCO Member small introduction of the participants afternoon: planning EMEA events for 2007 Breakout-sessions evening: Surprise event with local „Linux Users“ Sunday ------ if desired, visiting University of Basel with introduction in the used Red Hat Cluster Additional information * Accommodation * we have to pay per night and person EUR 5,50 / each. * We have the following rooms: -1- room with bunk bed, cupboard and washbasin -1- room with three bunk beds, cupboard and washbasin -4- rooms with each bunk bed, cupboard and washbasin -1- big room with five bunk beds and cupboards there are different showers and toilets. * You have to take care by your own for bed sheets, sleeping bag and your pillow. * Meals * Organized. Please indicate if you have special dietary requirements (vegetarian, allergies, ...) * Trip-planing * next airport Basel – Mulhouse (international airport) * next railway-station Lörrach * best reachable railway-station Basel (Badischer Bahnhof) * by car Google Maps is your friend :) * Registration * please send your engaging registration latest November, 18th by E-Mail to GeroldKa(a)fedoraproject.org We were looking forward to see you soon and it would be a pleasure to have you all at the first event of this kind. -- Regards Gerold Kassube Fedora Ambassador Deutschland / Germany Schweiz / Switzerland Email: GeroldKa(a)fedoraproject.org 1024D/F33128B9 4ABC A903 F1F4 D9CC C422 AACA EDF1 DF42 F331 28B9

1 0

Tausende von "illegal port" automounter-Fehlermeldungen
by Frank Thommen 13 Nov '06

13 Nov '06

Hallo, Ich habe einen Fedora Core 4-Client folgendermassen mit Automounter konfiguriert: /etc/auto.master: /home /etc/auto.home /etc/auto.home: * -rw,bg,intr myserver:/myhome/& Wenn ich nun auf dem Client ein nicht-existierendes File (z.B /home/afile) anspreche, versucht der Automounter ab dann *permanent*, dieses File anzusprechen. Das macht er, indem er offenbar den Mount ueber diverse - natuerlich illegale - Ports versucht. Damit fuellt er unsere Log-Partition auf (150'000 Zeilen in <3 Stunden): Nov 13 11:25:20 myserver rpc.mountd: refused mount request from myclient for /myhome/afile (/myhome): illegal port 43239 Die Portnummer variiert von Meldung zu Meldung Auf dem Client (aktuelles aufdatiertes und gepatchtes Fedora Core 4) sind autofs-4.1.4-26 and util-linux-2.12p-9.14 (fuer `mount`) installiert. Auf dem NFS-Server laeuft SuSE 9. Bin dankbar fuer jegliche Hilfe und Pointer. frank

1 0

Problem mit LVM nach Upgrade auf Core 6
by Marc Bratmann 10 Nov '06

10 Nov '06

Hallo zusammen, ich habe über Anaconda ein Upgrade von Core 5 auf Core 6 vorgenommen. Das Upgrade lief fehlerfrei durch. Nach dem Reboot kommt nun folgender Fehler: > Logical Volume Management einrichten: 2 logical volume(s) in volume group "VolGroup00" noch active [OK] > Dateisysteme prüfen [FEHLGESCHLAGEN] > > *** Beim Überprüfen des Dateisystems ist ein Fehler aufgetreten. > *** Sie werden zu einer Shell geführt; [...] > (Dateisystem reparieren) 1# Wenn ich hier mal ein fsck starte, erhalte ich folgende Meldung: > Warnung... fsck.ext3 für Gerät /dev/VolGroup00/LogVol00 wurde mit Signal 11 beendet. Kann ich das Problem mit dem LVM irgendwie über diese Shell lösen? Übrigens: Wenn ich einfach versuche wieder über den grafischen Modus neu zu installieren, bleibt der Rechner mit schwarzem Bildschirm und einem großen X (Mauszeiger) noch vor dem ersten Menu hängen. Wie gehe ich denn jetzt am besten vor? Besten Gruß, Marc

3 2

Invitation to the FAD
by Gerold 08 Nov '06

08 Nov '06

you'll find it as PDF at http://fedoraproject.org/wiki/FAD?action=AttachFile&do=get&target=invite_FA… First FEDORA AMBASSADORS DAY (FAD EMEA) ======================================= The Fedora Ambassador Day (FAD) is where Ambassadors and other interested members of the Fedora Community come together to plan for future Fedora events and get to know each other. This is your chance to meet other Fedora community members (Ambassadors, Developers) in person. We are proud to invite you to the first FAD in EMEA. The Event will start date ==== December 1st, 2006 (6 pm GMT+1) till December 3rd, 2006 location ======== Werner Mennicke Haus Rührberg e.V. Im Grossfeld 2 D-79639 Grenzach-Wyhlen - Germany - Agenda ====== Friday ------ afternoon: „come together“ Saturday -------- morning: Keynote from a FAMSCO Member small introduction of the participants afternoon: planning EMEA events for 2007 Breakout-sessions evening: Surprise event with local „Linux Users“ Sunday ------ if desired, visiting University of Basel with introduction in the used Red Hat Cluster Additional information * Accommodation * we have to pay per night and person EUR 5,50 / each. * We have the following rooms: -1- room with bunk bed, cupboard and washbasin -1- room with three bunk beds, cupboard and washbasin -4- rooms with each bunk bed, cupboard and washbasin -1- big room with five bunk beds and cupboards there are different showers and toilets. * You have to take care by your own for bed sheets, sleeping bag and your pillow. * Meals * Organized. Please indicate if you have special dietary requirements (vegetarian, allergies, ...) * Trip-planing * next airport Basel – Mulhouse (international airport) * next railway-station Lörrach * best reachable railway-station Basel (Badischer Bahnhof) * by car Google Maps is your friend :) * Registration * please send your engaging registration latest November, 18th by E-Mail to GeroldKa(a)fedoraproject.org We were looking forward to see you soon and it would be a pleasure to have you all at the first event of this kind. -- Regards Gerold Kassube Fedora Ambassador Deutschland / Germany Schweiz / Switzerland Email: GeroldKa(a)fedoraproject.org 1024D/F33128B9 4ABC A903 F1F4 D9CC C422 AACA EDF1 DF42 F331 28B9

1 0

/etc/smartd.conf wird überschrieben
by Jan Schaefer 07 Nov '06

07 Nov '06

Hallo, ich habe letzte Woche das Update auf Fedora Core 6 gewagt. Nach der Installation habe ich die /etc/smartd.conf so angepasst, dass meine Festplatten in der Nacht selbstständig Tests zur Gesundheit durchführen. Komischerweise werden diese Anpassungen nach einem Neustart des Systems und/oder Smart-Daemon wieder mit den Standardwerten überschrieben. Weiß jemand, wie man die Einstellungen dauerhaft hinbekommt? Danke und Gruß, Jan -- PGP: 2814 0DC4 597A 1083 9AA4 6F76 0DD9 54E1 B706 0963

1 0

Problem mit wpa_supplicant und madwifi
by Marc Bratmann 05 Nov '06

05 Nov '06

Hallo, ich habe Probleme mit der Installation meiner WLAN-Verbindung. Die Ausgangssituation: Hard- und Software Netgear WG311T (Atheros Chipset) Speedport W700V (Router) 2.6.18-1.2200.fc5 (Fedora Core 5) wireless-tools (Version 28) madwifi (Version 0.9.2) wpa_supplicant (Version 0.4.9) Routerkonfiguration SSID: KeepOut Channel: Automatic Mode: 802.11g + 802.11b (Mixed Mode) Encryption: WPA2 with Pre-shared key DHCP: enabled Netzwerkstatus [root@localhost marc]# ifconfig -a ath0 Link encap:Ethernet Hardware Adresse 00:14:6C:8C:9F:22 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:23 errors:0 dropped:0 overruns:0 frame:0 TX packets:42 errors:19 dropped:19 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:0 RX bytes:3105 (3.0 KiB) TX bytes:5395 (5.2 KiB) wifi0 Link encap:UNSPEC Hardware Adresse 00-14-6C-8C-9F-22-78-02-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:27670 errors:0 dropped:0 overruns:0 frame:25609 TX packets:2399 errors:3 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:199 RX bytes:3582554 (3.4 MiB) TX bytes:126853 (123.8 KiB) Interrupt:11 Speicher:e0960000-e0970000 [root@localhost marc]# iwconfig wifi0 no wireless extensions. Warning: Driver for device ath0 has been compiled with version 20 of Wireless Extension, while this program supports up to version 19. Some things may be broken... ath0 IEEE 802.11g ESSID:"KeepOut" Nickname:"localhost.localdomain" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:18 dBm Sensitivity=0/3 Retry:off RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/94 Signal level=-95 dBm Noise level=-95 dBm Rx invalid nwid:26519 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 [root@localhost marc]# iwlist ath0 scan Warning: Driver for device ath0 has been compiled with version 20 of Wireless Extension, while this program supports up to version 19. Some things may be broken... ath0 Scan completed : Cell 01 - Address: 00:12:BF:7F:5C:B9 ESSID:"KeepOut" Mode:Master Frequency:2.412 GHz (Channel 1) Quality=37/94 Signal level=-58 dBm Noise level=-95 dBm Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 12 Mb/s; 24 Mb/s; 36 Mb/s; 9 Mb/s; 18 Mb/s 48 Mb/s; 54 Mb/s Extra:bcn_int=100 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra:wme_ie=dd180050f2020101000003a4000027a4000042435e0062322f00 Konfigurationsdateien [root@localhost marc]# cat /etc/wpa_supplicant/wpa_supplicant.conf ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=wheel eapol_version=2 ap_scan=1 fast_reauth=1 # Home WLAN network={ scan_ssid=1 proto=WPA RSN key_mgmt=WPA-PSK pairwise=CCMP TKIP group=CCMP TKIP priority=2 ssid="KeepOut" psk=[...] } [root@localhost marc]# cat /etc/sysconfig/network-scripts/ifcfg-ath0 IPV6INIT=no ONBOOT=yes USERCTL=no PEERDNS=yes TYPE=Wireless DEVICE=ath0 HWADDR=00:14:6C:8C:9F:22 BOOTPROTO=dhcp ESSID=KeepOut MODE=Managed RATE=Auto WPA=yes Problem beim Aufruf von wpa_supplicant [root@localhost marc]# wpa_supplicant -d -c/etc/wpa_supplicant/wpa_supplicant.conf -iath0 -Dmadwifi Initializing interface 'ath0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'madwifi' ctrl_interface 'N/A' Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' ctrl_interface='/var/run/wpa_supplicant' ctrl_interface_group=10 (from group name 'wheel') eapol_version=2 ap_scan=1 fast_reauth=1 Priority group 2 id=0 ssid='KeepOut' Initializing interface (2) 'ath0' EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 SIOCGIWRANGE: WE(compiled)=20 WE(source)=13 enc_capa=0xf capabilities: key_mgmt 0xf enc 0xf Own MAC address: 00:14:6c:8c:9f:22 wpa_driver_madwifi_del_key: keyidx=0 wpa_driver_madwifi_del_key: keyidx=1 wpa_driver_madwifi_del_key: keyidx=2 wpa_driver_madwifi_del_key: keyidx=3 wpa_driver_madwifi_set_countermeasures: enabled=0 wpa_driver_madwifi_set_drop_unencrypted: enabled=1 Setting scan request: 0 sec 100000 usec Added interface ath0 Wireless event: cmd=0x8b06 len=8 State: DISCONNECTED -> SCANNING Starting AP scan (specific SSID) Scan SSID - hexdump_ascii(len=7): 4b 65 65 70 4f 75 74 KeepOut Wireless event: cmd=0x8b1a len=16 Wireless event: cmd=0x8b19 len=8 Received 738 bytes of scan results (3 BSSes) Scan results: 3 Selecting BSS from priority group 2 0: 00:12:bf:7f:5c:b9 ssid='KeepOut' wpa_ie_len=0 rsn_ie_len=22 caps=0x11 selected based on RSN IE Trying to associate with 00:12:bf:7f:5c:b9 (SSID='KeepOut' freq=2412 MHz) Cancelling scan request WPA: clearing own WPA/RSN IE Automatic auth_alg selection: 0x1 RSN: using IEEE 802.11i/D9.0 WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 WPA: clearing AP WPA IE WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 WPA: using GTK CCMP WPA: using PTK CCMP WPA: using KEY_MGMT WPA-PSK WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 No keys have been configured - skip key clearing wpa_driver_madwifi_set_drop_unencrypted: enabled=1 State: SCANNING -> ASSOCIATING wpa_driver_madwifi_associate ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument Association request to the driver failed Setting authentication timeout: 15 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto RSN: Ignored PMKID candidate without preauth flag Wireless event: cmd=0x8b1a len=16 Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:12:bf:7f:5c:b9 State: ASSOCIATING -> ASSOCIATED Associated to a new BSS: BSSID=00:12:bf:7f:5c:b9 No keys have been configured - skip key clearing Associated with 00:12:bf:7f:5c:b9 WPA: Association event - clear replay counter EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 EAPOL: External notification - portEnabled=1 EAPOL: SUPP_PAE entering state CONNECTING EAPOL: SUPP_BE entering state IDLE Setting authentication timeout: 10 sec 0 usec RX EAPOL from 00:12:bf:7f:5c:b9 Setting authentication timeout: 10 sec 0 usec IEEE 802.1X RX: version=1 type=3 length=117 EAPOL-Key type=2 key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack) key_length=16 key_data_length=22 replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 0a key_nonce - hexdump(len=32): 54 66 68 a5 67 fa 3b ed 4f 94 61 35 11 9b fa fa c2 d3 a9 f1 7f e6 55 c0 2f f4 64 09 64 04 ba 7a key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00 key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00 key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 State: ASSOCIATED -> 4WAY_HANDSHAKE WPA: RX message 1 of 4-Way Handshake from 00:12:bf:7f:5c:b9 (ver=2) RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 f4 3b e6 c6 a6 54 e1 a7 1a 3c 9a 61 81 a0 68 e4 RSN: PMKID from Authenticator - hexdump(len=16): f4 3b e6 c6 a6 54 e1 a7 1a 3c 9a 61 81 a0 68 e4 RSN: no matching PMKID found WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 WPA: Renewed SNonce - hexdump(len=32): d2 4c 5f cd a5 25 9f a3 cf 54 2f 67 d6 08 5e fb 7c 51 53 a2 89 a2 fe 49 c6 68 2f 0f 68 44 1a f1 WPA: PMK - hexdump(len=32): [REMOVED] WPA: PTK - hexdump(len=64): [REMOVED] WPA: Sending EAPOL-Key 2/4 RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added EAPOL: startWhen --> 0 EAPOL: SUPP_PAE entering state CONNECTING EAPOL: txStart WPA: drop TX EAPOL in non-IEEE 802.1X mode (type=1 len=0) RX EAPOL from 00:12:bf:7f:5c:b9 IEEE 802.1X RX: version=1 type=3 length=117 EAPOL-Key type=2 key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack) key_length=16 key_data_length=22 replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 0b key_nonce - hexdump(len=32): 54 66 68 a5 67 fa 3b ed 4f 94 61 35 11 9b fa fa c2 d3 a9 f1 7f e6 55 c0 2f f4 64 09 64 04 ba 7a key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00 key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00 key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE WPA: RX message 1 of 4-Way Handshake from 00:12:bf:7f:5c:b9 (ver=2) RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 f4 3b e6 c6 a6 54 e1 a7 1a 3c 9a 61 81 a0 68 e4 RSN: PMKID from Authenticator - hexdump(len=16): f4 3b e6 c6 a6 54 e1 a7 1a 3c 9a 61 81 a0 68 e4 RSN: no matching PMKID found WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 WPA: PMK - hexdump(len=32): [REMOVED] WPA: PTK - hexdump(len=64): [REMOVED] WPA: Sending EAPOL-Key 2/4 CTRL-EVENT-TERMINATING - signal 2 received Removing interface ath0 State: 4WAY_HANDSHAKE -> DISCONNECTED wpa_driver_madwifi_deauthenticate No keys have been configured - skip key clearing EAPOL: External notification - portEnabled=0 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: SUPP_BE entering state INITIALIZE EAPOL: External notification - portValid=0 wpa_driver_madwifi_set_drop_unencrypted: enabled=0 wpa_driver_madwifi_set_countermeasures: enabled=0 No keys have been configured - skip key clearing Cancelling scan request Problemlösung Keine Ahnung... Offensichtlich kommt die WPA2 Verbindung nicht hoch. Einige Logmeldungen deuten auf Probleme hin "Association request to the driver failed". Aber was fange ich damit nun an und wie löse ich das Problem? Vielleicht mache ich auch ganz andere Fehler. Bin leider noch relativ unerfahren unter Linux... Vielen Dank für Eure Hilfe! Besten Gruß, Marc

2 2

Postfix und maildir
by Frank Büttner 01 Nov '06

01 Nov '06

Hallo hat jemand eine Idee, wie ich Postfix dazu überreden die E-Mails im maildir Format nicht unter /home/$user/Maildir sondern unter /var/spool/mail/%user abzulegen? Danke

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

de-users November 2006