On Mon, 2018-01-08 at 14:40 +0100, Jan Kurik wrote:
>
> == Scope ==
> * Proposal owners:
> The general AArch64 support is already in place and is widely and
> actively supported by the Fedora ARM SIG and numerous ARM vendors and
> third parties in Fedora. There will be further and wider support,
> hardware enablement, polish and general improvements.
>
> * Other developers:
> N/A: There's no work required for other developers, the aarch64
> architecture is already widely supported as an Alternate Architecture.
>
> * Release engineering:
> Needs approval from release engineering as a primary architecture as
> well as pungi configuration changes to output artifacts to new
> location on the primary mirror.
> rel-eng ticket #7243: https://pagure.io/releng/issue/7243
>
> * Policies and guidelines:
> Updates to the primary architectures and release blocking details will
> need to be updated to reflect that the AArch64 Server/Cloud/Docker
> components are now considered primary.
>
> * Trademark approval:
> N/A (not needed for this Change)
A significant miss here is 'testing'. Making an arch primary means we
need to ensure we have the necessary resources to run all the relevant
validation testing.
I note pwhalen is a co-owner of the proposal so he's likely signed up
to ensure testing gets done, but still, it should be properly covered
in the Change document itself.
As a further note, almost all the Server validation for x86_64 is done
by openQA; doing it manually can be a considerable pain, as you have to
set up a mini FreeIPA deployment. It would probably be best if we add
aarch64 workers to the Fedora openQA deployment to run these tests on
aarch64; we've already extended openQA (staging) to ppc64, so all the
bits should be in place for us to add another arch, pretty much. I'm
going to follow up on this with pwhalen.
Another consideration would be whether we ought to also have aarch64
support in Taskotron, if it's going to become a primary arch. I'm not
actually sure if Taskotron currently covers 32-bit ARM, though, even.
--
Adam Williamson
Fedora QA Community Monkey
IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net
http://www.happyassassin.net
On Mon, Jan 8, 2018 at 5:53 PM, Stephen John Smoogen <smooge(a)gmail.com> wrote:
> On 8 January 2018 at 12:28, Matthew Miller <mattdm(a)fedoraproject.org> wrote:
>> On Mon, Jan 08, 2018 at 09:16:05AM -0800, Adam Williamson wrote:
>>> A significant miss here is 'testing'. Making an arch primary means we
>>> need to ensure we have the necessary resources to run all the relevant
>>> validation testing.
>>
>> Are there hardware needs here? (Like, not in the server room but in QA
>> team member's hands?)
>>
>
> I would say in both. We would need to make sure we have enough systems
> which openqa can reliably run on and we need to have some sort of
> system that testers can get a hand on. That would require a bit of a
There will be more than enough HW for openQA, we have two large
systems we'll put into the cloud (awaiting commissioning now the DC
migration is done) which will enable us to use AutoCloud (or what ever
it's replacement is) for VM/Docker testing, and a number of physical
systems for OpenQA.
> 'we expect this hardware to work and this is how you buy/get it' from
> the aarch64 team.. otherwise most everyone is going to come and ask
> why the raspberry pi 3 isn't supported (just like they did with the
The Raspberry Pi 3 *IS* supported on aarch64 [1]! As is the Pine64,
currently headless needs a serial console but by F-28 it will be
supported with basic console out for HDMI too, We support around 20
aarch64 SBCs in F-27 [1] and I expect that to likely double, or even
more than that, with F-28. Along with all the SBSA compliant hardware
etc.
I have the ability to get HW provided to people that are actually
going to use it for testing.... the problem I have here is that I
regularly give people hardware for testing and I get zero testing back
and Paul, myself and others still end up doing all the testing.....
> raspberry pi 1 and 2.) [I am not looking to rehash why it isn't ..
> more that is what most testers can get their hands on easily.. and it
> is not a aarch64 platform we support).
Err, RPi 0-2 are 32 bit only devices.... in the case of < 2 they're
ARMv6, and we support the RPi2 with 32 bit.... I don't see how any of
that is relevant to this conversation?
[1] https://nullr0ute.com/2017/11/overview-of-aarch64-sbc-support-in-fedora-27/
On Mon, 2018-01-08 at 20:03 +0200, Jonathan Dieter wrote:
> On Mon, 2018-01-08 at 12:53 -0500, Stephen John Smoogen wrote:
> > On 8 January 2018 at 12:28, Matthew Miller <mattdm(a)fedoraproject.org>
> > wrote:
> > > On Mon, Jan 08, 2018 at 09:16:05AM -0800, Adam Williamson wrote:
> > > > A significant miss here is 'testing'. Making an arch primary
> > > > means we
> > > > need to ensure we have the necessary resources to run all the
> > > > relevant
> > > > validation testing.
> > >
> > > Are there hardware needs here? (Like, not in the server room but in
> > > QA
> > > team member's hands?)
> > >
> >
> > I would say in both. We would need to make sure we have enough
> > systems
> > which openqa can reliably run on and we need to have some sort of
> > system that testers can get a hand on. That would require a bit of a
> > 'we expect this hardware to work and this is how you buy/get it' from
> > the aarch64 team.. otherwise most everyone is going to come and ask
> > why the raspberry pi 3 isn't supported (just like they did with the
> > raspberry pi 1 and 2.) [I am not looking to rehash why it isn't ..
> > more that is what most testers can get their hands on easily.. and it
> > is not a aarch64 platform we support).
>
> I may be going off in the weeds here, but is https://fedoraproject.org/
> wiki/Architectures/ARM/Raspberry_Pi#Raspberry_Pi_3_aarch64_support not
> accurate when it says it *is* supported?
I'd say it's slightly unclear. So far as *the ARM team* is concerned,
they 'support' that hardware, but so far as *anyone else* is concerned,
aarch64 has been a secondary arch all this time. No aarch64 image has
been considered 'release-blocking', the aarch64 trees / images are
published in the fedora-secondary tree (not the fedora tree), etc.
--
Adam Williamson
Fedora QA Community Monkey
IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net
http://www.happyassassin.net
On Mon, 2018-01-08 at 12:53 -0500, Stephen John Smoogen wrote:
> On 8 January 2018 at 12:28, Matthew Miller <mattdm(a)fedoraproject.org> wrote:
> > On Mon, Jan 08, 2018 at 09:16:05AM -0800, Adam Williamson wrote:
> > > A significant miss here is 'testing'. Making an arch primary means we
> > > need to ensure we have the necessary resources to run all the relevant
> > > validation testing.
> >
> > Are there hardware needs here? (Like, not in the server room but in QA
> > team member's hands?)
> >
>
> I would say in both. We would need to make sure we have enough systems
> which openqa can reliably run on and we need to have some sort of
> system that testers can get a hand on. That would require a bit of a
> 'we expect this hardware to work and this is how you buy/get it' from
> the aarch64 team..
pwhalen says we already have hardware available in phx, but I haven't
asked him for more details yet.
We wouldn't need much to run the necessary tests, really. Enough boxes
to run ~8 VMs simultaneously would probably suffice.
--
Adam Williamson
Fedora QA Community Monkey
IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net
http://www.happyassassin.net
The following Fedora 27 Security updates need testing:
Age URL
44 https://bodhi.fedoraproject.org/updates/FEDORA-2017-15efa72a0c docker-1.13.1-44.git584d391.fc27
40 https://bodhi.fedoraproject.org/updates/FEDORA-2017-913288e9a9 mongodb-3.4.10-1.fc27
37 https://bodhi.fedoraproject.org/updates/FEDORA-2017-d7c0748c1b pdns-4.1.0-1.fc27
37 https://bodhi.fedoraproject.org/updates/FEDORA-2017-14f5c6cdac qpid-cpp-1.37.0-1.fc27
19 https://bodhi.fedoraproject.org/updates/FEDORA-2017-01ad8b3946 heketi-5.0.1-1.fc27
18 https://bodhi.fedoraproject.org/updates/FEDORA-2017-3997279e65 wireshark-2.4.3-1.fc27
11 https://bodhi.fedoraproject.org/updates/FEDORA-2017-2d4c9a6e37 monit-5.25.1-1.fc27
6 https://bodhi.fedoraproject.org/updates/FEDORA-2018-b1f3217ae6 nasm-2.13.02-1.fc27
4 https://bodhi.fedoraproject.org/updates/FEDORA-2018-7edfa0cfbf awstats-7.6-8.fc27
4 https://bodhi.fedoraproject.org/updates/FEDORA-2018-d034538627 php-7.1.13-1.fc27
4 https://bodhi.fedoraproject.org/updates/FEDORA-2018-448444341e sox-14.4.2.0-13.fc27
3 https://bodhi.fedoraproject.org/updates/FEDORA-2018-57c3a424eb qtpass-1.2.1-1.fc27
The following builds have been pushed to Fedora 27 updates-testing
GAPDoc-1.6.1-1.fc27
GeoIP-GeoLite-data-2018.01-1.fc27
composer-1.6.2-1.fc27
container-selinux-2.39-1.fc27
debhelper-11.1.1-1.fc27
debootstrap-1.0.93-1.fc27
dh-make-2.201701-1.fc27
evolution-3.26.4-1.fc27
evolution-data-server-3.26.4-1.fc27
evolution-ews-3.26.4-1.fc27
gap-pkg-nautytracesinterface-0.2-1.20171120git5f16120.fc27
git-fame-1.3.0-1.fc27
golang-github-bitly-go-simplejson-0.5.0-1.fc27
golang-github-flynn-json5-0-0.1.20160717git7620272.fc27
gtk3-3.22.26-2.fc27
hplip-3.17.11-3.fc27
libjson-rpc-cpp-1.1.0-1.fc27
ocserv-0.11.10-1.fc27
perl-Authen-Passphrase-0.008-1.fc27
perl-RPM2-1.4-1.fc27
php-composer-spdx-licenses-1.2.0-1.fc27
php-pecl-couchbase2-2.4.3-2.fc27
python-pika-0.11.2-2.fc27
python-quantities-0.12.1-1.fc27
python-requests-kerberos-0.12.0-1.fc27
python-softlayer-5.3.2-2.fc27
rb_libtorrent-1.1.6-1.fc27
sane-backends-1.0.27-9.fc27
shorewall-5.1.10.2-1.fc27
xflr5-6.40-1.fc27
Details about builds:
================================================================================
GAPDoc-1.6.1-1.fc27 (FEDORA-2018-7afcf8d30e)
GAP documentation tool
--------------------------------------------------------------------------------
Update Information:
Changes in version 1.6.1: - Slightly nicer display of header lines of
ManSection's with long names and/or long argument lists. - Added an element
<Constr> to be used in ManSection's on constructors. - Minimal changes to make
GAPDoc (translation of manual, and handler functions for the help system) work
in any single thread in HPCGAP.
--------------------------------------------------------------------------------
================================================================================
GeoIP-GeoLite-data-2018.01-1.fc27 (FEDORA-2018-7b8aa2ba72)
Free GeoLite IP geolocation country database
--------------------------------------------------------------------------------
Update Information:
Update to current databases.
--------------------------------------------------------------------------------
================================================================================
composer-1.6.2-1.fc27 (FEDORA-2018-de41d0571b)
Dependency Manager for PHP
--------------------------------------------------------------------------------
Update Information:
**composer 1.6.2** - 2018-01-05 * Fixed more autoloader regressions * Fixed
support for updating dist refs in gitlab URLs --- **composer 1.6.1** -
2018-01-04 * Fixed upgrade regression due to some autoloader cleanups *
Fixed some overly loose version constraints ---- **composer 1.6.0** -
2018-01-04 * Added support for SPDX license identifiers v3.0, deprecates
GPL/LGPL/AGPL identifiers, which should now have a `-only` or `-or-later` suffix
added. * Added support for COMPOSER_MEMORY_LIMIT env var to make Composer set
the PHP memory limit explicitly * Added support for simple strings for the
`bin` * Fixed `check-platform-reqs` bug in version checking --- **composer
1.6.0RC** - 2017-12-19 * Improved performance of installs and updates from
git clones when checking out known commits * Added `check-platform-reqs`
command that checks that your PHP and extensions versions match the platform
requirements of the installed packages * Added `--with-all-dependencies` to
the `update` and `require` commands which updates all dependencies of the listed
packages, including those that are direct root requirements * Added `scripts-
descriptions` key to composer.json to customize the description and document
your custom commands * Added support for the uppercase NO_PROXY env var *
Added support for COMPOSER_DEFAULT_{AUTHOR,LICENSE,EMAIL,VENDOR} env vars to
pre-populate init command values * Added support for local fossil repositories
* Added suggestions for alternative spellings when entering packages in `init`
and `require` commands and nothing can be found * Fixed installed.json data to
be sorted alphabetically by package name * Fixed compatibility with Symfony
4.x components that Composer uses --- **spdx-licenses 1.2.0** - 2018-01-03
* Added: deprecation status for all licenses and a
`SpdxLicenses::isDeprecatedByIdentifier` method. * Changed: updated licenses
list to SPDX 3.0.
--------------------------------------------------------------------------------
================================================================================
container-selinux-2.39-1.fc27 (FEDORA-2018-e513053ca9)
SELinux policies for container runtimes
--------------------------------------------------------------------------------
Update Information:
Fixes bounds check problems on systems with unconfined domain disabled.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1531858 - On fully upgraded F27, can't install container-selinux
https://bugzilla.redhat.com/show_bug.cgi?id=1531858
[ 2 ] Bug #1514795 - SELinux is preventing systemd from 'create' accesses on the unix_stream_socket Unknown.
https://bugzilla.redhat.com/show_bug.cgi?id=1514795
--------------------------------------------------------------------------------
================================================================================
debhelper-11.1.1-1.fc27 (FEDORA-2018-84b6fd7b85)
Helper programs for Debian rules
--------------------------------------------------------------------------------
Update Information:
Update to 11.1.1 ---- Update to 11.1
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1532090 - debhelper-11.1.1 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1532090
[ 2 ] Bug #1504326 - debhelper-11.1 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1504326
--------------------------------------------------------------------------------
================================================================================
debootstrap-1.0.93-1.fc27 (FEDORA-2018-8984173b8e)
Debian GNU/Linux bootstrapper
--------------------------------------------------------------------------------
Update Information:
Update to 1.0.93 (#1523424)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1523424 - debootstrap-1.0.93 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1523424
--------------------------------------------------------------------------------
================================================================================
dh-make-2.201701-1.fc27 (FEDORA-2018-510f351389)
Tool that converts source archives into Debian package source
--------------------------------------------------------------------------------
Update Information:
Update to 2.201701 (#1527706)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1527706 - dh-make-2.201701 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1527706
--------------------------------------------------------------------------------
================================================================================
evolution-3.26.4-1.fc27 (FEDORA-2018-873a67f67c)
Mail and calendar client for GNOME
--------------------------------------------------------------------------------
Update Information:
Update to 3.26.4 upstream release.
--------------------------------------------------------------------------------
================================================================================
evolution-data-server-3.26.4-1.fc27 (FEDORA-2018-873a67f67c)
Backend data server for Evolution
--------------------------------------------------------------------------------
Update Information:
Update to 3.26.4 upstream release.
--------------------------------------------------------------------------------
================================================================================
evolution-ews-3.26.4-1.fc27 (FEDORA-2018-873a67f67c)
Evolution extension for Exchange Web Services
--------------------------------------------------------------------------------
Update Information:
Update to 3.26.4 upstream release.
--------------------------------------------------------------------------------
================================================================================
gap-pkg-nautytracesinterface-0.2-1.20171120git5f16120.fc27 (FEDORA-2018-e77c76c909)
GAP interface to nauty and Traces
--------------------------------------------------------------------------------
Update Information:
This new package provides a GAP interface to nauty and Traces.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1519607 - Review Request: gap-pkg-nautytracesinterface - GAP interface to nauty and Traces
https://bugzilla.redhat.com/show_bug.cgi?id=1519607
--------------------------------------------------------------------------------
================================================================================
git-fame-1.3.0-1.fc27 (FEDORA-2018-d308ff953b)
Pretty-print git repository collaborators sorted by contributions
--------------------------------------------------------------------------------
Update Information:
Update to 1.3.0
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1531970 - git-fame-1.3.0 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531970
--------------------------------------------------------------------------------
================================================================================
golang-github-bitly-go-simplejson-0.5.0-1.fc27 (FEDORA-2018-36d1d53225)
Go package to interact with arbitrary JSON
--------------------------------------------------------------------------------
Update Information:
First package for Fedora
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1525694 - Review Request: golang-github-bitly-go-simplejson - Go package to interact with arbitrary JSON
https://bugzilla.redhat.com/show_bug.cgi?id=1525694
--------------------------------------------------------------------------------
================================================================================
golang-github-flynn-json5-0-0.1.20160717git7620272.fc27 (FEDORA-2018-931a8db3b9)
Go JSON5 decoder package based on encoding/json
--------------------------------------------------------------------------------
Update Information:
First package for Fedora
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1508078 - Review Request: golang-github-flynn-json5 - Go JSON5 decoder package based on encoding/json
https://bugzilla.redhat.com/show_bug.cgi?id=1508078
--------------------------------------------------------------------------------
================================================================================
gtk3-3.22.26-2.fc27 (FEDORA-2018-515941fbad)
GTK+ graphical user interface library
--------------------------------------------------------------------------------
Update Information:
- Backport fix for guest/host copy&paste issues in Boxes [(Freedesktop
#101353)](https://bugs.freedesktop.org/show_bug.cgi?id=101353)
--------------------------------------------------------------------------------
================================================================================
hplip-3.17.11-3.fc27 (FEDORA-2018-b75d703b7f)
HP Linux Imaging and Printing Project
--------------------------------------------------------------------------------
Update Information:
fixing 1528851 for option -xraw
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1528851 - Unable to scan and save jpg with color with hp-scan
https://bugzilla.redhat.com/show_bug.cgi?id=1528851
--------------------------------------------------------------------------------
================================================================================
libjson-rpc-cpp-1.1.0-1.fc27 (FEDORA-2018-499842afe7)
C++ framework for json-rpc (json remote procedure call)
--------------------------------------------------------------------------------
Update Information:
Update to 1.1.0
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1531327 - libjson-rpc-cpp-1.1.0 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531327
--------------------------------------------------------------------------------
================================================================================
ocserv-0.11.10-1.fc27 (FEDORA-2018-9c6c4c7898)
OpenConnect SSL VPN server
--------------------------------------------------------------------------------
Update Information:
- Update to upstream 0.11.10 release
--------------------------------------------------------------------------------
================================================================================
perl-Authen-Passphrase-0.008-1.fc27 (FEDORA-2018-00bb7c3794)
Hashed passwords/passphrases as objects
--------------------------------------------------------------------------------
Update Information:
Specfile autogenerated by cpanspec 1.78.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1520581 - Review Request: perl-Authen-Passphrase - Hashed passwords/passphrases as objects
https://bugzilla.redhat.com/show_bug.cgi?id=1520581
--------------------------------------------------------------------------------
================================================================================
perl-RPM2-1.4-1.fc27 (FEDORA-2018-0bfed89ef0)
Perl bindings for the RPM Package Manager API
--------------------------------------------------------------------------------
Update Information:
This release fixes some compiler warnings.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1532230 - perl-RPM2-1.4 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1532230
--------------------------------------------------------------------------------
================================================================================
php-composer-spdx-licenses-1.2.0-1.fc27 (FEDORA-2018-de41d0571b)
SPDX licenses list and validation library
--------------------------------------------------------------------------------
Update Information:
**composer 1.6.2** - 2018-01-05 * Fixed more autoloader regressions * Fixed
support for updating dist refs in gitlab URLs --- **composer 1.6.1** -
2018-01-04 * Fixed upgrade regression due to some autoloader cleanups *
Fixed some overly loose version constraints ---- **composer 1.6.0** -
2018-01-04 * Added support for SPDX license identifiers v3.0, deprecates
GPL/LGPL/AGPL identifiers, which should now have a `-only` or `-or-later` suffix
added. * Added support for COMPOSER_MEMORY_LIMIT env var to make Composer set
the PHP memory limit explicitly * Added support for simple strings for the
`bin` * Fixed `check-platform-reqs` bug in version checking --- **composer
1.6.0RC** - 2017-12-19 * Improved performance of installs and updates from
git clones when checking out known commits * Added `check-platform-reqs`
command that checks that your PHP and extensions versions match the platform
requirements of the installed packages * Added `--with-all-dependencies` to
the `update` and `require` commands which updates all dependencies of the listed
packages, including those that are direct root requirements * Added `scripts-
descriptions` key to composer.json to customize the description and document
your custom commands * Added support for the uppercase NO_PROXY env var *
Added support for COMPOSER_DEFAULT_{AUTHOR,LICENSE,EMAIL,VENDOR} env vars to
pre-populate init command values * Added support for local fossil repositories
* Added suggestions for alternative spellings when entering packages in `init`
and `require` commands and nothing can be found * Fixed installed.json data to
be sorted alphabetically by package name * Fixed compatibility with Symfony
4.x components that Composer uses --- **spdx-licenses 1.2.0** - 2018-01-03
* Added: deprecation status for all licenses and a
`SpdxLicenses::isDeprecatedByIdentifier` method. * Changed: updated licenses
list to SPDX 3.0.
--------------------------------------------------------------------------------
================================================================================
php-pecl-couchbase2-2.4.3-2.fc27 (FEDORA-2018-8cf2fc3188)
Couchbase Server PHP extension
--------------------------------------------------------------------------------
Update Information:
The PHP client library provides fast access to documents stored in a Couchbase
Server.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1531464 - Review Request: php-pecl-couchbase2 - Couchbase Server PHP extension
https://bugzilla.redhat.com/show_bug.cgi?id=1531464
--------------------------------------------------------------------------------
================================================================================
python-pika-0.11.2-2.fc27 (FEDORA-2018-3457ae30a8)
AMQP 0-9-1 client library for Python
--------------------------------------------------------------------------------
Update Information:
Update to pika 0.11.2
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1507508 - pika 0.11
https://bugzilla.redhat.com/show_bug.cgi?id=1507508
--------------------------------------------------------------------------------
================================================================================
python-quantities-0.12.1-1.fc27 (FEDORA-2018-6c29f8b0a7)
Support for physical quantities with units, based on numpy
--------------------------------------------------------------------------------
Update Information:
Update to latest release.
--------------------------------------------------------------------------------
================================================================================
python-requests-kerberos-0.12.0-1.fc27 (FEDORA-2018-7b627ff1f1)
A Kerberos authentication handler for python-requests
--------------------------------------------------------------------------------
Update Information:
Upstream release 0.12.0: https://github.com/requests/requests-
kerberos/blob/v0.12.0/HISTORY.rst#0120-2017-12-20
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1524750 - python-requests-kerberos-0.12.0 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1524750
--------------------------------------------------------------------------------
================================================================================
python-softlayer-5.3.2-2.fc27 (FEDORA-2018-4ea3d2a1d2)
SoftLayer API Python Client and library
--------------------------------------------------------------------------------
Update Information:
Initial release
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1526847 - Review Request: python-softlayer - SoftLayer API Python Client and library
https://bugzilla.redhat.com/show_bug.cgi?id=1526847
--------------------------------------------------------------------------------
================================================================================
rb_libtorrent-1.1.6-1.fc27 (FEDORA-2018-69ddf47b33)
A C++ BitTorrent library aiming to be the best alternative
--------------------------------------------------------------------------------
Update Information:
Update
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1530010 - rb_libtorrent-1.1.6 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1530010
--------------------------------------------------------------------------------
================================================================================
sane-backends-1.0.27-9.fc27 (FEDORA-2018-225e6912e6)
Scanner access software
--------------------------------------------------------------------------------
Update Information:
fixing configure option --with-usb 1530216 - Samsung scanners need proprietary
driver for working [Fedora-ALL]
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1530216 - Samsung scanners need proprietary driver for working [Fedora-ALL]
https://bugzilla.redhat.com/show_bug.cgi?id=1530216
--------------------------------------------------------------------------------
================================================================================
shorewall-5.1.10.2-1.fc27 (FEDORA-2017-7bab7a530b)
An iptables front end for firewall configuration
--------------------------------------------------------------------------------
Update Information:
New upstream release
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1401739 - shorewall-5.1.10 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1401739
[ 2 ] Bug #1513472 - Needs update
https://bugzilla.redhat.com/show_bug.cgi?id=1513472
[ 3 ] Bug #1498461 - Perl script incompatibility
https://bugzilla.redhat.com/show_bug.cgi?id=1498461
--------------------------------------------------------------------------------
================================================================================
xflr5-6.40-1.fc27 (FEDORA-2018-0e904cdd50)
Analysis tool for airfoils, wings and planes
--------------------------------------------------------------------------------
Update Information:
Update to version 6.40, see http://www.xflr5.com/ReleaseNotes.htm for details.
--------------------------------------------------------------------------------
==================================
#fedora-meeting: Fedora QA meeting
==================================
Meeting started by adamw at 16:04:51 UTC. The full logs are available at
https://meetbot.fedoraproject.org/fedora-meeting/2018-01-08/fedora-qa.2018-…
.
Meeting summary
---------------
* Roll Call (adamw, 16:04:59)
* Previous meeting follow-up (adamw, 16:10:56)
* "sumantro to create f28 milestones in pagure (and close old
tickets/milestones as appropriate)" - this is done (adamw,
16:12:30)
* Meltdown / Spectre status / discussion (adamw, 16:17:37)
* Meltdown fix has shipped to Fedora 26, 27 and Rawhide. Spectre fixes
are pending, first for variant 1, then variant 2. adamw will stay in
contact with folks working on the fixes and flag up updates for
testing as they appear (adamw, 16:25:57)
* all kernel updates that land over the next couple of weeks should be
tested urgently - they may address aspects of Meltdown/Spectre even
if not marked with the relevant CVEs (e.g. fixes for ppc64 /
aarch64) (adamw, 16:29:18)
* Fedora 28 Change review and status (adamw, 16:33:18)
* LINK: https://fedoraproject.org/wiki/Changes/StratisStorage may be
relevant to release validation if support gets added to the
installer (adamw, 16:43:56)
* LINK: https://fedoraproject.org/wiki/Changes/StrongCryptoSettings
could well cause some messes, worth keeping an eye on. not entirely
sure how we'd go about running a test day for it, as it could affect
an awful lot of stuff (adamw, 16:47:07)
* LINK: https://fedoraproject.org/wiki/Changes/ThunderboltEnablement
seems like another test day candidate, assuming we know anyone with
testable hardware... (adamw, 16:48:26)
* LINK: https://fedoraproject.org/wiki/Changes/AnacondaModularization
will obviously affect validation, but we'll naturally test it as
part of the usual validation testing (adamw, 16:49:19)
* ACTION: adamw and pwhalen to discuss adding aarch64 workers to
openqa (adamw, 16:54:24)
* see logs for call-outs of several specific Changes for validation
testing / Test Day purposes, sorry for not individually #info'ing
them (adamw, 16:54:55)
* Test Day status (adamw, 16:56:07)
* most test day planning is waiting for later in the cycle, after the
mass rebuild and when the Changes start to land (adamw, 16:57:42)
* Open floor (adamw, 16:57:46)
* LINK: https://communityblog.fedoraproject.org/tag/heroes-of-fedora/
- it looks like every milestone from f26 alpha to f27 final is
missing (adamw, 17:00:37)
* ACTION: adamw to check with coremodule if he can write HoF posts for
F26 Beta / Final and F27 Beta (adamw, 17:06:12)
Meeting ended at 17:06:19 UTC.
Action Items
------------
* adamw and pwhalen to discuss adding aarch64 workers to openqa
* adamw to check with coremodule if he can write HoF posts for F26 Beta
/ Final and F27 Beta
Action Items, by person
-----------------------
* adamw
* adamw and pwhalen to discuss adding aarch64 workers to openqa
* adamw to check with coremodule if he can write HoF posts for F26
Beta / Final and F27 Beta
* coremodule
* adamw to check with coremodule if he can write HoF posts for F26
Beta / Final and F27 Beta
* pwhalen
* adamw and pwhalen to discuss adding aarch64 workers to openqa
* **UNASSIGNED**
* (none)
People Present (lines said)
---------------------------
* adamw (109)
* Kohane (38)
* sumantrom[m] (9)
* tenk (8)
* jforbes (7)
* zodbot (6)
* sumantro (6)
* pwhalen (5)
* tflink (4)
* pjones (4)
* pschindl_wfh (1)
* siddharthvipul1 (1)
* kparal (1)
* coremodule (1)
* satellit_ (1)
Generated by `MeetBot`_ 0.1.4
.. _`MeetBot`: http://wiki.debian.org/MeetBot
--
Adam Williamson
Fedora QA Community Monkey
IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net
http://www.happyassassin.net
The following Fedora 26 Security updates need testing:
Age URL
165 https://bodhi.fedoraproject.org/updates/FEDORA-2017-ccb5c8d1e7 docker-distribution-2.6.2-1.git48294d9.fc26
58 https://bodhi.fedoraproject.org/updates/FEDORA-2017-3915878e18 ldns-1.7.0-4.fc26
40 https://bodhi.fedoraproject.org/updates/FEDORA-2017-774e7863a4 mongodb-3.4.10-1.fc26
36 https://bodhi.fedoraproject.org/updates/FEDORA-2017-7bac3ba7c3 qpid-cpp-1.37.0-1.fc26
17 https://bodhi.fedoraproject.org/updates/FEDORA-2017-f7cbe22fd8 heketi-5.0.1-1.fc26
11 https://bodhi.fedoraproject.org/updates/FEDORA-2017-d75a88f263 monit-5.25.1-1.fc26
6 https://bodhi.fedoraproject.org/updates/FEDORA-2017-d1213cef30 mupdf-1.12.0-1.fc26
6 https://bodhi.fedoraproject.org/updates/FEDORA-2018-48569250d1 nasm-2.13.02-1.fc26
3 https://bodhi.fedoraproject.org/updates/FEDORA-2018-17ba1a2393 awstats-7.6-4.fc26
3 https://bodhi.fedoraproject.org/updates/FEDORA-2018-c4e9207c31 php-7.1.13-1.fc26
3 https://bodhi.fedoraproject.org/updates/FEDORA-2018-6ca3df84ad sox-14.4.2.0-13.fc26
3 https://bodhi.fedoraproject.org/updates/FEDORA-2018-6cd2e0e292 gifsicle-1.90-1.fc26
3 https://bodhi.fedoraproject.org/updates/FEDORA-2018-5aa21dc9a3 qtpass-1.2.1-1.fc26
3 https://bodhi.fedoraproject.org/updates/FEDORA-2018-ccef1ced42 gimp-2.8.22-3.fc26
0 https://bodhi.fedoraproject.org/updates/FEDORA-2018-fb582aabcc firefox-57.0.4-1.fc26
The following Fedora 26 Critical Path updates have yet to be approved:
Age URL
7 https://bodhi.fedoraproject.org/updates/FEDORA-2017-86281f085b libfm-1.2.5-4.gitD20171230.fc26
7 https://bodhi.fedoraproject.org/updates/FEDORA-2017-b3916cfc52 pcmanfm-1.2.5-3.fc26
6 https://bodhi.fedoraproject.org/updates/FEDORA-2018-8bdedce282 perl-podlators-4.09-3.fc26
6 https://bodhi.fedoraproject.org/updates/FEDORA-2018-af9c086f87 pigz-2.4-1.fc26
3 https://bodhi.fedoraproject.org/updates/FEDORA-2018-c2eed6bd99 iproute-4.14.1-4.fc26
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-35ec68d59d publicsuffix-list-20171228-1.fc26
0 https://bodhi.fedoraproject.org/updates/FEDORA-2018-403c7c5351 gtk3-3.22.21-3.fc26
0 https://bodhi.fedoraproject.org/updates/FEDORA-2018-66604dd3d7 python-requests-kerberos-0.12.0-1.fc26
0 https://bodhi.fedoraproject.org/updates/FEDORA-2018-fb582aabcc firefox-57.0.4-1.fc26
0 https://bodhi.fedoraproject.org/updates/FEDORA-2018-240b9e54f9 glusterfs-3.10.9-1.fc26
The following builds have been pushed to Fedora 26 updates-testing
GeoIP-GeoLite-data-2018.01-1.fc26
composer-1.6.2-1.fc26
container-selinux-2.39-1.fc26
debhelper-11.1.1-1.fc26
debootstrap-1.0.93-1.fc26
dh-make-2.201701-1.fc26
firefox-57.0.4-1.fc26
git-fame-1.3.0-1.fc26
gtk3-3.22.21-3.fc26
libjson-rpc-cpp-1.1.0-1.fc26
perl-Authen-Passphrase-0.008-1.fc26
php-composer-spdx-licenses-1.2.0-1.fc26
php-pecl-couchbase2-2.4.3-2.fc26
python-pika-0.11.2-2.fc26
python-quantities-0.12.1-1.fc26
python-requests-kerberos-0.12.0-1.fc26
rb_libtorrent-1.1.6-1.fc26
sane-backends-1.0.27-9.fc26
shorewall-5.1.10.2-1.fc26
xflr5-6.40-1.fc26
Details about builds:
================================================================================
GeoIP-GeoLite-data-2018.01-1.fc26 (FEDORA-2018-c777b44352)
Free GeoLite IP geolocation country database
--------------------------------------------------------------------------------
Update Information:
Update to current databases.
--------------------------------------------------------------------------------
================================================================================
composer-1.6.2-1.fc26 (FEDORA-2018-edbc70d0df)
Dependency Manager for PHP
--------------------------------------------------------------------------------
Update Information:
**composer 1.6.2** - 2018-01-05 * Fixed more autoloader regressions * Fixed
support for updating dist refs in gitlab URLs --- **composer 1.6.1** -
2018-01-04 * Fixed upgrade regression due to some autoloader cleanups *
Fixed some overly loose version constraints ---- **composer 1.6.0** -
2018-01-04 * Added support for SPDX license identifiers v3.0, deprecates
GPL/LGPL/AGPL identifiers, which should now have a `-only` or `-or-later` suffix
added. * Added support for COMPOSER_MEMORY_LIMIT env var to make Composer set
the PHP memory limit explicitly * Added support for simple strings for the
`bin` * Fixed `check-platform-reqs` bug in version checking --- **composer
1.6.0RC** - 2017-12-19 * Improved performance of installs and updates from
git clones when checking out known commits * Added `check-platform-reqs`
command that checks that your PHP and extensions versions match the platform
requirements of the installed packages * Added `--with-all-dependencies` to
the `update` and `require` commands which updates all dependencies of the listed
packages, including those that are direct root requirements * Added `scripts-
descriptions` key to composer.json to customize the description and document
your custom commands * Added support for the uppercase NO_PROXY env var *
Added support for COMPOSER_DEFAULT_{AUTHOR,LICENSE,EMAIL,VENDOR} env vars to
pre-populate init command values * Added support for local fossil repositories
* Added suggestions for alternative spellings when entering packages in `init`
and `require` commands and nothing can be found * Fixed installed.json data to
be sorted alphabetically by package name * Fixed compatibility with Symfony
4.x components that Composer uses --- **spdx-licenses 1.2.0** - 2018-01-03
* Added: deprecation status for all licenses and a
`SpdxLicenses::isDeprecatedByIdentifier` method. * Changed: updated licenses
list to SPDX 3.0.
--------------------------------------------------------------------------------
================================================================================
container-selinux-2.39-1.fc26 (FEDORA-2018-1d288c81a2)
SELinux policies for container runtimes
--------------------------------------------------------------------------------
Update Information:
Fixes bounds check problems on systems with unconfined domain disabled. ----
Fix problem with bounds checker.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1531858 - On fully upgraded F27, can't install container-selinux
https://bugzilla.redhat.com/show_bug.cgi?id=1531858
[ 2 ] Bug #1514795 - SELinux is preventing systemd from 'create' accesses on the unix_stream_socket Unknown.
https://bugzilla.redhat.com/show_bug.cgi?id=1514795
--------------------------------------------------------------------------------
================================================================================
debhelper-11.1.1-1.fc26 (FEDORA-2018-1bb253a9f5)
Helper programs for Debian rules
--------------------------------------------------------------------------------
Update Information:
Update to 11.1.1 ---- Update to 11.1
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1532090 - debhelper-11.1.1 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1532090
[ 2 ] Bug #1504326 - debhelper-11.1 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1504326
--------------------------------------------------------------------------------
================================================================================
debootstrap-1.0.93-1.fc26 (FEDORA-2018-cd5581cbd1)
Debian GNU/Linux bootstrapper
--------------------------------------------------------------------------------
Update Information:
Update to 1.0.93 (#1523424)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1523424 - debootstrap-1.0.93 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1523424
--------------------------------------------------------------------------------
================================================================================
dh-make-2.201701-1.fc26 (FEDORA-2018-7c900716c2)
Tool that converts source archives into Debian package source
--------------------------------------------------------------------------------
Update Information:
Update to 2.201701 (#1527706)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1527706 - dh-make-2.201701 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1527706
--------------------------------------------------------------------------------
================================================================================
firefox-57.0.4-1.fc26 (FEDORA-2018-fb582aabcc)
Mozilla Firefox Web browser
--------------------------------------------------------------------------------
Update Information:
- Update to 57.0.4 - Security fixes to address the Meltdown and Spectre timing
attacks - https://blog.mozilla.org/security/2018/01/03/mitigations-landing-new-
class-timing-attack/ - Require new nss 3.34 (fixed #1531031) - Disabled ARM on
all Fedoras due to #1523912
--------------------------------------------------------------------------------
================================================================================
git-fame-1.3.0-1.fc26 (FEDORA-2018-0045743053)
Pretty-print git repository collaborators sorted by contributions
--------------------------------------------------------------------------------
Update Information:
Update to 1.3.0
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1531970 - git-fame-1.3.0 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531970
--------------------------------------------------------------------------------
================================================================================
gtk3-3.22.21-3.fc26 (FEDORA-2018-403c7c5351)
GTK+ graphical user interface library
--------------------------------------------------------------------------------
Update Information:
- Backport fix for guest/host copy&paste issues in Boxes [(Freedesktop
#101353)](https://bugs.freedesktop.org/show_bug.cgi?id=101353)
--------------------------------------------------------------------------------
================================================================================
libjson-rpc-cpp-1.1.0-1.fc26 (FEDORA-2018-0f35e2547f)
C++ framework for json-rpc (json remote procedure call)
--------------------------------------------------------------------------------
Update Information:
Update to 1.1.0
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1531327 - libjson-rpc-cpp-1.1.0 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531327
--------------------------------------------------------------------------------
================================================================================
perl-Authen-Passphrase-0.008-1.fc26 (FEDORA-2018-7f9b99ce4a)
Hashed passwords/passphrases as objects
--------------------------------------------------------------------------------
Update Information:
Specfile autogenerated by cpanspec 1.78.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1520581 - Review Request: perl-Authen-Passphrase - Hashed passwords/passphrases as objects
https://bugzilla.redhat.com/show_bug.cgi?id=1520581
--------------------------------------------------------------------------------
================================================================================
php-composer-spdx-licenses-1.2.0-1.fc26 (FEDORA-2018-edbc70d0df)
SPDX licenses list and validation library
--------------------------------------------------------------------------------
Update Information:
**composer 1.6.2** - 2018-01-05 * Fixed more autoloader regressions * Fixed
support for updating dist refs in gitlab URLs --- **composer 1.6.1** -
2018-01-04 * Fixed upgrade regression due to some autoloader cleanups *
Fixed some overly loose version constraints ---- **composer 1.6.0** -
2018-01-04 * Added support for SPDX license identifiers v3.0, deprecates
GPL/LGPL/AGPL identifiers, which should now have a `-only` or `-or-later` suffix
added. * Added support for COMPOSER_MEMORY_LIMIT env var to make Composer set
the PHP memory limit explicitly * Added support for simple strings for the
`bin` * Fixed `check-platform-reqs` bug in version checking --- **composer
1.6.0RC** - 2017-12-19 * Improved performance of installs and updates from
git clones when checking out known commits * Added `check-platform-reqs`
command that checks that your PHP and extensions versions match the platform
requirements of the installed packages * Added `--with-all-dependencies` to
the `update` and `require` commands which updates all dependencies of the listed
packages, including those that are direct root requirements * Added `scripts-
descriptions` key to composer.json to customize the description and document
your custom commands * Added support for the uppercase NO_PROXY env var *
Added support for COMPOSER_DEFAULT_{AUTHOR,LICENSE,EMAIL,VENDOR} env vars to
pre-populate init command values * Added support for local fossil repositories
* Added suggestions for alternative spellings when entering packages in `init`
and `require` commands and nothing can be found * Fixed installed.json data to
be sorted alphabetically by package name * Fixed compatibility with Symfony
4.x components that Composer uses --- **spdx-licenses 1.2.0** - 2018-01-03
* Added: deprecation status for all licenses and a
`SpdxLicenses::isDeprecatedByIdentifier` method. * Changed: updated licenses
list to SPDX 3.0.
--------------------------------------------------------------------------------
================================================================================
php-pecl-couchbase2-2.4.3-2.fc26 (FEDORA-2018-ce6a8b5cf0)
Couchbase Server PHP extension
--------------------------------------------------------------------------------
Update Information:
The PHP client library provides fast access to documents stored in a Couchbase
Server.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1531464 - Review Request: php-pecl-couchbase2 - Couchbase Server PHP extension
https://bugzilla.redhat.com/show_bug.cgi?id=1531464
--------------------------------------------------------------------------------
================================================================================
python-pika-0.11.2-2.fc26 (FEDORA-2018-e84c9da0fb)
AMQP 0-9-1 client library for Python
--------------------------------------------------------------------------------
Update Information:
Update to pika 0.11.2
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1507508 - pika 0.11
https://bugzilla.redhat.com/show_bug.cgi?id=1507508
--------------------------------------------------------------------------------
================================================================================
python-quantities-0.12.1-1.fc26 (FEDORA-2018-436d41f117)
Support for physical quantities with units, based on numpy
--------------------------------------------------------------------------------
Update Information:
Update to latest release.
--------------------------------------------------------------------------------
================================================================================
python-requests-kerberos-0.12.0-1.fc26 (FEDORA-2018-66604dd3d7)
A Kerberos authentication handler for python-requests
--------------------------------------------------------------------------------
Update Information:
Upstream release 0.12.0: https://github.com/requests/requests-
kerberos/blob/v0.12.0/HISTORY.rst#0120-2017-12-20
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1524750 - python-requests-kerberos-0.12.0 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1524750
--------------------------------------------------------------------------------
================================================================================
rb_libtorrent-1.1.6-1.fc26 (FEDORA-2018-c3a9564750)
A C++ BitTorrent library aiming to be the best alternative
--------------------------------------------------------------------------------
Update Information:
Update
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1530010 - rb_libtorrent-1.1.6 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1530010
--------------------------------------------------------------------------------
================================================================================
sane-backends-1.0.27-9.fc26 (FEDORA-2018-0cdee5b800)
Scanner access software
--------------------------------------------------------------------------------
Update Information:
fixing configure option --with-usb 1530216 - Samsung scanners need proprietary
driver for working [Fedora-ALL]
--------------------------------------------------------------------------------
================================================================================
shorewall-5.1.10.2-1.fc26 (FEDORA-2017-48805a9fb7)
An iptables front end for firewall configuration
--------------------------------------------------------------------------------
Update Information:
New upstream release
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1401739 - shorewall-5.1.10 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1401739
[ 2 ] Bug #1513472 - Needs update
https://bugzilla.redhat.com/show_bug.cgi?id=1513472
[ 3 ] Bug #1498461 - Perl script incompatibility
https://bugzilla.redhat.com/show_bug.cgi?id=1498461
--------------------------------------------------------------------------------
================================================================================
xflr5-6.40-1.fc26 (FEDORA-2018-0c65e4d306)
Analysis tool for airfoils, wings and planes
--------------------------------------------------------------------------------
Update Information:
Update to version 6.40, see http://www.xflr5.com/ReleaseNotes.htm for details.
--------------------------------------------------------------------------------
The following Fedora 27 Security updates need testing:
Age URL
44 https://bodhi.fedoraproject.org/updates/FEDORA-2017-15efa72a0c docker-1.13.1-44.git584d391.fc27
39 https://bodhi.fedoraproject.org/updates/FEDORA-2017-913288e9a9 mongodb-3.4.10-1.fc27
36 https://bodhi.fedoraproject.org/updates/FEDORA-2017-d7c0748c1b pdns-4.1.0-1.fc27
36 https://bodhi.fedoraproject.org/updates/FEDORA-2017-14f5c6cdac qpid-cpp-1.37.0-1.fc27
19 https://bodhi.fedoraproject.org/updates/FEDORA-2017-01ad8b3946 heketi-5.0.1-1.fc27
17 https://bodhi.fedoraproject.org/updates/FEDORA-2017-3997279e65 wireshark-2.4.3-1.fc27
11 https://bodhi.fedoraproject.org/updates/FEDORA-2017-2d4c9a6e37 monit-5.25.1-1.fc27
9 https://bodhi.fedoraproject.org/updates/FEDORA-2017-41242dfe10 asterisk-14.7.5-1.fc27
7 https://bodhi.fedoraproject.org/updates/FEDORA-2017-4c30d86843 mupdf-1.12.0-1.fc27
5 https://bodhi.fedoraproject.org/updates/FEDORA-2018-b1f3217ae6 nasm-2.13.02-1.fc27
4 https://bodhi.fedoraproject.org/updates/FEDORA-2018-7edfa0cfbf awstats-7.6-8.fc27
4 https://bodhi.fedoraproject.org/updates/FEDORA-2018-d034538627 php-7.1.13-1.fc27
4 https://bodhi.fedoraproject.org/updates/FEDORA-2018-448444341e sox-14.4.2.0-13.fc27
2 https://bodhi.fedoraproject.org/updates/FEDORA-2018-57c3a424eb qtpass-1.2.1-1.fc27
2 https://bodhi.fedoraproject.org/updates/FEDORA-2018-67b75f73fa gimp-2.8.22-3.fc27
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-048468d7a8 poppler-0.57.0-7.fc27
The following builds have been pushed to Fedora 27 updates-testing
canl-java-2.5.0-1.fc27
fluidsynth-1.1.9-1.fc27
gammu-1.39.0-1.fc27
homebank-5.1.7-1.fc27
js-jquery-ui-touch-punch-0.2.3-0.1.20141219git4bc0091.fc27
js-jsroot-5.3.4-2.fc27
kf5-kwallet-5.41.0-3.fc27
octave-doctest-0.6.1-1.fc27
pan-0.144-1.fc27
paperkey-1.5-1.fc27
python-gammu-2.11-1.fc27
scribus-generator-2.5-3.fc27
voms-api-java-3.2.0-5.fc27
voms-clients-java-3.0.7-5.fc27
wammu-0.44-1.fc27
yuicompressor-2.4.8-1.fc27
Details about builds:
================================================================================
canl-java-2.5.0-1.fc27 (FEDORA-2018-651aed081f)
EMI Common Authentication library - bindings for Java
--------------------------------------------------------------------------------
Update Information:
Update canl-java to latest version.
--------------------------------------------------------------------------------
================================================================================
fluidsynth-1.1.9-1.fc27 (FEDORA-2018-3180656648)
Real-time software synthesizer
--------------------------------------------------------------------------------
Update Information:
1.1.9 Bug Fixes * fix build if no MIDI drivers are available (thanks to
@carlo-bramini) * fix return value of fluid_file_set_encoding_quality()
(thanks to @ReinholdH) * fix use-after-free in fluid_timer * fix memory
leak in pulseaudio driver * fix memory leak in rvoice_mixer (thanks to
@mawe42) * fix dumptuning shell command displaying uninitialized values
(thanks to @rmattes) * fix a resource leak in source shell command (thanks to
@carlo-bramini) * avoid a buffer overrun when mixing effects channels in
fluid_synth_nwrite_float() (#287) New Features * implement handling of
FLUID_SEQ_ALLSOUNDSOFF events in fluid_seq_fluidsynth_callback() * support
for registering audio drivers based on actual needs (#218) 1.1.8 * fix a bug
around synth.audio-groups setting, which caused improper multi-channel rendering
(#225) 1.1.7 Bug fixes * consistently relicense libfluidsynth under
LGPL-2.1+ (also addressing fluid_chorus.c, #165) *
fluid_synth_set_channel_type() was not exported properly * fix calculations
for modulators (#194) * fix SysEx parsing issues (#127, #148, thanks to Erik
Ronstr��m and Stas Sergeev) * fix mangling with illegal sample loops, causing
audible glitches (#171, #149, thanks to @mawe42) * fix inverse logic of
audio.jack.multi option (#135) * fix channel fine tune RPN to use correct
range (#187, thanks to @mawe42) * fix timing problems when changing the
sequencers scale from a callback event (#195, thanks to @imhcyx) * workaround
incorrectly rendered audio when requesting more than 64 frames from
fluid_synth_write_*() (#192) * adjust ALSA MIDI port type (#139) * avoid
voice_count becoming negative (#151, thanks to Jean-Jacques Ceresa) * avoid
notes with a fixed key generator playing forever (#159) * avoid TCP/IP
connections from closing in an undefined manner (b75c8fd) * a lot of memory
leaks, NULL dereferences and SegFaults (thanks to Surabhi Mishra) New Features
* add support of vorbis-compressed sf3 sound fonts (#140, thanks to
@fabiangreffrath) * add sostenuto pedal to the synth (#47, #134, thanks to
Jean-Jacques Ceresa) * add vbr quality when encoding with libsndfile * re-
implement routing reverb and chorus to distinct buffers in
fluid_synth_nwrite_float() (#135) * add IPv6 support to socket API (#124)
New API calls * channel, key, velocity and state getter for fluid_voice_t *
tempo, bpm, total length and currentBeat getter for fluid_player (#190, thanks
to @quiasmo)
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1399896 - invalid soundfont is stored in config, fails in subsequent runs
https://bugzilla.redhat.com/show_bug.cgi?id=1399896
[ 2 ] Bug #1529469 - fluidsynth 1.1.8 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1529469
--------------------------------------------------------------------------------
================================================================================
gammu-1.39.0-1.fc27 (FEDORA-2018-6cd9504408)
Command Line utility to work with mobile phones
--------------------------------------------------------------------------------
Update Information:
Update gammu, python-gammu and wammu ---- Update gammu and python-gammu
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1531832 - wammu-0.44 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531832
[ 2 ] Bug #1510442 - python-gammu-2.10 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1510442
[ 3 ] Bug #1531828 - python-gammu-2.11 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531828
[ 4 ] Bug #1504333 - gammu-1.38.5 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1504333
[ 5 ] Bug #1531519 - gammu-1.39.0 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531519
--------------------------------------------------------------------------------
================================================================================
homebank-5.1.7-1.fc27 (FEDORA-2018-a2d3d3314e)
Free easy personal accounting for all
--------------------------------------------------------------------------------
Update Information:
- Update to 5.1.7
--------------------------------------------------------------------------------
================================================================================
js-jquery-ui-touch-punch-0.2.3-0.1.20141219git4bc0091.fc27 (FEDORA-2018-ce7c385f0d)
Touch Event Support for jQuery UI
--------------------------------------------------------------------------------
Update Information:
jQuery UI Touch Punch is a small hack that enables the use of touch events on
sites using the jQuery UI user interface library.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1528186 - Review Request: js-jquery-ui-touch-punch - Touch Event Support for jQuery UI
https://bugzilla.redhat.com/show_bug.cgi?id=1528186
--------------------------------------------------------------------------------
================================================================================
js-jsroot-5.3.4-2.fc27 (FEDORA-2018-042415a1d7)
JavaScript ROOT - Interactive numerical data analysis graphics
--------------------------------------------------------------------------------
Update Information:
JavaScript ROOT provides interactive ROOT-like graphics in web browsers. Data
can be read and displayed from binary and JSON ROOT files.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1529012 - Review Request: js-jsroot - JavaScript ROOT
https://bugzilla.redhat.com/show_bug.cgi?id=1529012
--------------------------------------------------------------------------------
================================================================================
kf5-kwallet-5.41.0-3.fc27 (FEDORA-2018-cfffb270cf)
KDE Frameworks 5 Tier 3 solution for password management
--------------------------------------------------------------------------------
Update Information:
Fix and improve gpg backend support.
--------------------------------------------------------------------------------
================================================================================
octave-doctest-0.6.1-1.fc27 (FEDORA-2018-8948760931)
Documentation tests for Octave
--------------------------------------------------------------------------------
Update Information:
version bump with bug fixes on ARM arch and other enhancements.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1529816 - octave-doctest-0.6.1 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1529816
--------------------------------------------------------------------------------
================================================================================
pan-0.144-1.fc27 (FEDORA-2018-737115af5d)
A Usenet newsreader for GNOME/GTK+
--------------------------------------------------------------------------------
Update Information:
Update to version 0.144
--------------------------------------------------------------------------------
================================================================================
paperkey-1.5-1.fc27 (FEDORA-2018-5aba2d1f02)
An OpenPGP key archiver
--------------------------------------------------------------------------------
Update Information:
Upstream bugfix and enhancement release. Updates: - Properly fail if a secret
subkey packet cannot be parsed. - Add support for EdDSA keys
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1508230 - paperkey-1.5 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1508230
--------------------------------------------------------------------------------
================================================================================
python-gammu-2.11-1.fc27 (FEDORA-2018-6cd9504408)
Python bindings for Gammu
--------------------------------------------------------------------------------
Update Information:
Update gammu, python-gammu and wammu ---- Update gammu and python-gammu
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1531832 - wammu-0.44 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531832
[ 2 ] Bug #1510442 - python-gammu-2.10 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1510442
[ 3 ] Bug #1531828 - python-gammu-2.11 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531828
[ 4 ] Bug #1504333 - gammu-1.38.5 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1504333
[ 5 ] Bug #1531519 - gammu-1.39.0 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531519
--------------------------------------------------------------------------------
================================================================================
scribus-generator-2.5-3.fc27 (FEDORA-2018-eb8a149bab)
Open source high-quality PDF template and mail-merge alternative
--------------------------------------------------------------------------------
Update Information:
New package
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1519081 - Review Request: scribus-generator - Open source high-quality PDF template and mail-merge alternative
https://bugzilla.redhat.com/show_bug.cgi?id=1519081
--------------------------------------------------------------------------------
================================================================================
voms-api-java-3.2.0-5.fc27 (FEDORA-2018-651aed081f)
Virtual Organization Membership Service Java API
--------------------------------------------------------------------------------
Update Information:
Update canl-java to latest version.
--------------------------------------------------------------------------------
================================================================================
voms-clients-java-3.0.7-5.fc27 (FEDORA-2018-651aed081f)
Virtual Organization Membership Service Java clients
--------------------------------------------------------------------------------
Update Information:
Update canl-java to latest version.
--------------------------------------------------------------------------------
================================================================================
wammu-0.44-1.fc27 (FEDORA-2018-6cd9504408)
Mobile Phone Manager - Gammu GUI
--------------------------------------------------------------------------------
Update Information:
Update gammu, python-gammu and wammu ---- Update gammu and python-gammu
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1531832 - wammu-0.44 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531832
[ 2 ] Bug #1510442 - python-gammu-2.10 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1510442
[ 3 ] Bug #1531828 - python-gammu-2.11 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531828
[ 4 ] Bug #1504333 - gammu-1.38.5 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1504333
[ 5 ] Bug #1531519 - gammu-1.39.0 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531519
--------------------------------------------------------------------------------
================================================================================
yuicompressor-2.4.8-1.fc27 (FEDORA-2018-cbaf01d959)
YUI Compressor - The Yahoo JavaScript and CSS Compressor
--------------------------------------------------------------------------------
Update Information:
The YUI Compressor is a JavaScript compressor which, in addition to removing
comments and white-spaces, obfuscates local variables using the smallest
possible variable name. This obfuscation is safe, even when using constructs
such as 'eval' or 'with' (although the compression is not optimal in those
cases) Compared to jsmin, the average savings is around 20%. The YUI Compressor
is also able to safely compress CSS files. The decision on which compressor is
being used is made on the file extension (js or css).
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1523302 - Review Request: yuicompressor - YUI Compressor - The Yahoo JavaScript and CSS Compressor
https://bugzilla.redhat.com/show_bug.cgi?id=1523302
--------------------------------------------------------------------------------
The following Fedora 26 Security updates need testing:
Age URL
165 https://bodhi.fedoraproject.org/updates/FEDORA-2017-ccb5c8d1e7 docker-distribution-2.6.2-1.git48294d9.fc26
57 https://bodhi.fedoraproject.org/updates/FEDORA-2017-3915878e18 ldns-1.7.0-4.fc26
40 https://bodhi.fedoraproject.org/updates/FEDORA-2017-774e7863a4 mongodb-3.4.10-1.fc26
36 https://bodhi.fedoraproject.org/updates/FEDORA-2017-7bac3ba7c3 qpid-cpp-1.37.0-1.fc26
17 https://bodhi.fedoraproject.org/updates/FEDORA-2017-f7cbe22fd8 heketi-5.0.1-1.fc26
11 https://bodhi.fedoraproject.org/updates/FEDORA-2017-d75a88f263 monit-5.25.1-1.fc26
5 https://bodhi.fedoraproject.org/updates/FEDORA-2017-d1213cef30 mupdf-1.12.0-1.fc26
5 https://bodhi.fedoraproject.org/updates/FEDORA-2018-48569250d1 nasm-2.13.02-1.fc26
2 https://bodhi.fedoraproject.org/updates/FEDORA-2018-17ba1a2393 awstats-7.6-4.fc26
2 https://bodhi.fedoraproject.org/updates/FEDORA-2018-c4e9207c31 php-7.1.13-1.fc26
2 https://bodhi.fedoraproject.org/updates/FEDORA-2018-6ca3df84ad sox-14.4.2.0-13.fc26
2 https://bodhi.fedoraproject.org/updates/FEDORA-2018-6cd2e0e292 gifsicle-1.90-1.fc26
2 https://bodhi.fedoraproject.org/updates/FEDORA-2018-5aa21dc9a3 qtpass-1.2.1-1.fc26
2 https://bodhi.fedoraproject.org/updates/FEDORA-2018-ccef1ced42 gimp-2.8.22-3.fc26
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-20ba39cba9 poppler-0.52.0-11.fc26
The following Fedora 26 Critical Path updates have yet to be approved:
Age URL
7 https://bodhi.fedoraproject.org/updates/FEDORA-2017-86281f085b libfm-1.2.5-4.gitD20171230.fc26
7 https://bodhi.fedoraproject.org/updates/FEDORA-2017-b3916cfc52 pcmanfm-1.2.5-3.fc26
5 https://bodhi.fedoraproject.org/updates/FEDORA-2018-8bdedce282 perl-podlators-4.09-3.fc26
5 https://bodhi.fedoraproject.org/updates/FEDORA-2018-af9c086f87 pigz-2.4-1.fc26
2 https://bodhi.fedoraproject.org/updates/FEDORA-2018-5d0b0fde58 ntfs-3g-2017.3.23-4.fc26
2 https://bodhi.fedoraproject.org/updates/FEDORA-2018-c2eed6bd99 iproute-4.14.1-4.fc26
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-319eef8bad fedora-repos-26-2
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-35ec68d59d publicsuffix-list-20171228-1.fc26
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-85b80e6600 pkgconf-1.3.12-2.fc26
1 https://bodhi.fedoraproject.org/updates/FEDORA-2018-20ba39cba9 poppler-0.52.0-11.fc26
0 https://bodhi.fedoraproject.org/updates/FEDORA-2018-240b9e54f9 glusterfs-3.10.9-1.fc26
The following builds have been pushed to Fedora 26 updates-testing
canl-java-2.5.0-1.fc26
gammu-1.39.0-1.fc26
glusterfs-3.10.9-1.fc26
homebank-5.1.7-1.fc26
js-jquery-ui-touch-punch-0.2.3-0.1.20141219git4bc0091.fc26
js-jsroot-5.3.4-2.fc26
kf5-kwallet-5.41.0-3.fc26
paperkey-1.5-1.fc26
python-gammu-2.11-1.fc26
scribus-generator-2.5-3.fc26
voms-api-java-3.2.0-5.fc26
voms-clients-java-3.0.7-5.fc26
wammu-0.44-1.fc26
yuicompressor-2.4.8-1.fc26
Details about builds:
================================================================================
canl-java-2.5.0-1.fc26 (FEDORA-2018-d64f3921b6)
EMI Common Authentication library - bindings for Java
--------------------------------------------------------------------------------
Update Information:
Update canl-java to latest version.
--------------------------------------------------------------------------------
================================================================================
gammu-1.39.0-1.fc26 (FEDORA-2018-d66730c9d2)
Command Line utility to work with mobile phones
--------------------------------------------------------------------------------
Update Information:
Update gammu, python-gammu and wammu ---- update for gammu and python-gammu
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1531832 - wammu-0.44 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531832
[ 2 ] Bug #1510442 - python-gammu-2.10 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1510442
[ 3 ] Bug #1531828 - python-gammu-2.11 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531828
[ 4 ] Bug #1504333 - gammu-1.38.5 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1504333
[ 5 ] Bug #1531519 - gammu-1.39.0 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531519
--------------------------------------------------------------------------------
================================================================================
glusterfs-3.10.9-1.fc26 (FEDORA-2018-240b9e54f9)
Distributed File System
--------------------------------------------------------------------------------
Update Information:
3.10.9 GA
--------------------------------------------------------------------------------
================================================================================
homebank-5.1.7-1.fc26 (FEDORA-2018-1e6c40ea97)
Free easy personal accounting for all
--------------------------------------------------------------------------------
Update Information:
- Update to 5.1.7
--------------------------------------------------------------------------------
================================================================================
js-jquery-ui-touch-punch-0.2.3-0.1.20141219git4bc0091.fc26 (FEDORA-2018-7fe88794a5)
Touch Event Support for jQuery UI
--------------------------------------------------------------------------------
Update Information:
jQuery UI Touch Punch is a small hack that enables the use of touch events on
sites using the jQuery UI user interface library.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1528186 - Review Request: js-jquery-ui-touch-punch - Touch Event Support for jQuery UI
https://bugzilla.redhat.com/show_bug.cgi?id=1528186
--------------------------------------------------------------------------------
================================================================================
js-jsroot-5.3.4-2.fc26 (FEDORA-2018-0866d0dca0)
JavaScript ROOT - Interactive numerical data analysis graphics
--------------------------------------------------------------------------------
Update Information:
JavaScript ROOT provides interactive ROOT-like graphics in web browsers. Data
can be read and displayed from binary and JSON ROOT files.
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1529012 - Review Request: js-jsroot - JavaScript ROOT
https://bugzilla.redhat.com/show_bug.cgi?id=1529012
--------------------------------------------------------------------------------
================================================================================
kf5-kwallet-5.41.0-3.fc26 (FEDORA-2018-c3c95338e1)
KDE Frameworks 5 Tier 3 solution for password management
--------------------------------------------------------------------------------
Update Information:
Fix and improve gpg backend support.
--------------------------------------------------------------------------------
================================================================================
paperkey-1.5-1.fc26 (FEDORA-2018-7886c9043f)
An OpenPGP key archiver
--------------------------------------------------------------------------------
Update Information:
Upstream bugfix and enhancement release. Updates: - Properly fail if a secret
subkey packet cannot be parsed. - Add support for EdDSA keys
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1508230 - paperkey-1.5 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1508230
--------------------------------------------------------------------------------
================================================================================
python-gammu-2.11-1.fc26 (FEDORA-2018-d66730c9d2)
Python bindings for Gammu
--------------------------------------------------------------------------------
Update Information:
Update gammu, python-gammu and wammu ---- update for gammu and python-gammu
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1531832 - wammu-0.44 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531832
[ 2 ] Bug #1510442 - python-gammu-2.10 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1510442
[ 3 ] Bug #1531828 - python-gammu-2.11 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531828
[ 4 ] Bug #1504333 - gammu-1.38.5 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1504333
[ 5 ] Bug #1531519 - gammu-1.39.0 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531519
--------------------------------------------------------------------------------
================================================================================
scribus-generator-2.5-3.fc26 (FEDORA-2018-4e9aa991b4)
Open source high-quality PDF template and mail-merge alternative
--------------------------------------------------------------------------------
Update Information:
New package
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1519081 - Review Request: scribus-generator - Open source high-quality PDF template and mail-merge alternative
https://bugzilla.redhat.com/show_bug.cgi?id=1519081
--------------------------------------------------------------------------------
================================================================================
voms-api-java-3.2.0-5.fc26 (FEDORA-2018-d64f3921b6)
Virtual Organization Membership Service Java API
--------------------------------------------------------------------------------
Update Information:
Update canl-java to latest version.
--------------------------------------------------------------------------------
================================================================================
voms-clients-java-3.0.7-5.fc26 (FEDORA-2018-d64f3921b6)
Virtual Organization Membership Service Java clients
--------------------------------------------------------------------------------
Update Information:
Update canl-java to latest version.
--------------------------------------------------------------------------------
================================================================================
wammu-0.44-1.fc26 (FEDORA-2018-d66730c9d2)
Mobile Phone Manager - Gammu GUI
--------------------------------------------------------------------------------
Update Information:
Update gammu, python-gammu and wammu ---- update for gammu and python-gammu
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1531832 - wammu-0.44 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531832
[ 2 ] Bug #1510442 - python-gammu-2.10 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1510442
[ 3 ] Bug #1531828 - python-gammu-2.11 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531828
[ 4 ] Bug #1504333 - gammu-1.38.5 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1504333
[ 5 ] Bug #1531519 - gammu-1.39.0 is available
https://bugzilla.redhat.com/show_bug.cgi?id=1531519
--------------------------------------------------------------------------------
================================================================================
yuicompressor-2.4.8-1.fc26 (FEDORA-2018-e2bf46e878)
YUI Compressor - The Yahoo JavaScript and CSS Compressor
--------------------------------------------------------------------------------
Update Information:
The YUI Compressor is a JavaScript compressor which, in addition to removing
comments and white-spaces, obfuscates local variables using the smallest
possible variable name. This obfuscation is safe, even when using constructs
such as 'eval' or 'with' (although the compression is not optimal in those
cases) Compared to jsmin, the average savings is around 20%. The YUI Compressor
is also able to safely compress CSS files. The decision on which compressor is
being used is made on the file extension (js or css).
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1523302 - Review Request: yuicompressor - YUI Compressor - The Yahoo JavaScript and CSS Compressor
https://bugzilla.redhat.com/show_bug.cgi?id=1523302
--------------------------------------------------------------------------------