Hi,
I still have big trouble with my Dell Poweredge 1650 and an Adaptec 29160 with an external Hardware 1 TB Raid-box. The linus distri is Fedora Core R2.
If I try to copy files to or from the raid local or via smb, scp or nfs the copyprocess stopps for some seconds with a lot of errors in the logs.
I checked all cabels and terminators also the scsi-bios-settings of the controller.
I tried different kernels from 2.6.5 (original FC2) to 2.6.7-development single cpu and smp - the problemm is still the same.
Amy ideas??
I cann post the complete error log if this would be of use...
Jun 28 12:03:49 salvatore kernel: scsi0:0:1:0: Attempting to queue an ABORT message Jun 28 12:03:49 salvatore kernel: CDB: 0x28 0x0 0x0 0x1 0x40 0xa7 0x0 0x0 0x8 0x0 Jun 28 12:03:49 salvatore kernel: scsi0: At time of recovery, card was not paused Jun 28 12:03:49 salvatore kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< Jun 28 12:03:49 salvatore kernel: scsi0: Dumping Card State while idle, at SEQADDR 0x18 Jun 28 12:03:49 salvatore kernel: Card was paused ....
Regards
Götz Reinicke
Götz Reinicke writes:
Hi,
I still have big trouble with my Dell Poweredge 1650 and an Adaptec 29160 with an external Hardware 1 TB Raid-box. The linus distri is Fedora Core R2.
If I try to copy files to or from the raid local or via smb, scp or nfs the copyprocess stopps for some seconds with a lot of errors in the logs.
I don't remember if 29160 supports 320MB/s, but if it does, and you're trying to go at it, downshift the card to 160MB/s. I had problems in FC 1 running a 29320 @ 320MB/s, and had to downshift to 160MB/s. Otherwise @320MB/s the kernel was falling over with errors.
Do you have an nVidia graphics card in that machine? I've noticed that one of either the nVidia binary-only drivers or the 8k-stack kernels from Linuxant seem to stomp on the interrupts from my 29160 card. Who'd have thought?
I get numerous spurious 29160 interrupts every day, but only with the closed-source nVidia drivers installed. Since the Linuxant kernels are purportedly only the stock kernels with the 4k-stack and the register-parm-passing patches backed out to restore driver compatibility, it seems unlikely that the problem is due to the Linuxant kernel. This was also a problem under FC1. Note that this does not happen with the stock FC2 kernels using the standard open-source nv drivers.
Is this possibly the error that you're seeing?
If so, hopefully the new nVidia drivers will fix this bug when they eventually come out...
On Mon, 2004-06-28 at 06:17, Götz Reinicke wrote:
Hi,
I still have big trouble with my Dell Poweredge 1650 and an Adaptec 29160 with an external Hardware 1 TB Raid-box. The linus distri is Fedora Core R2.
If I try to copy files to or from the raid local or via smb, scp or nfs the copyprocess stopps for some seconds with a lot of errors in the logs.
I checked all cabels and terminators also the scsi-bios-settings of the controller.
I tried different kernels from 2.6.5 (original FC2) to 2.6.7-development single cpu and smp - the problemm is still the same.
Amy ideas??
I cann post the complete error log if this would be of use...
Jun 28 12:03:49 salvatore kernel: scsi0:0:1:0: Attempting to queue an ABORT message Jun 28 12:03:49 salvatore kernel: CDB: 0x28 0x0 0x0 0x1 0x40 0xa7 0x0 0x0 0x8 0x0 Jun 28 12:03:49 salvatore kernel: scsi0: At time of recovery, card was not paused Jun 28 12:03:49 salvatore kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< Jun 28 12:03:49 salvatore kernel: scsi0: Dumping Card State while idle, at SEQADDR 0x18 Jun 28 12:03:49 salvatore kernel: Card was paused ....
Regards
Götz Reinicke
Götz Reinicke IT Koordinator - IT OfficeNet
Tel. +49 (0) 7141 - 969 420 Fax +49 (0) 7141 - 969 55 420 goetz.reinicke@filmakademie.de
Filmakademie Baden-Württemberg Mathildenstr. 20 71638 Ludwigsburg www.filmakademie.de