-- Chris Kloiber On 04/15/2010 06:16 AM, Itamar Reis Peixoto wrote: > On Thu, Apr 15, 2010 at 2:49 AM, Chris Kloiberckloiber@ckloiber.com wrote: >> So I thought I'd give this installation method a whirl (inside VirtualBox) >> but it fails every time. Usually died at: >> >> gPXE 0.9.9+ -- Open Source Boot Firmware -- http://etherboot.org >> Features: HTTP DNS TFTP AoE iSCSI bzImage COMBOOT ELF Multiboot PXE PXEXT >> >> Attempting to start boot.fedoraproject.org >> Setting up networking... >> >> static.gpxe: 325 bytes [script] [LOADED] >> Opening first network interface ... >> If you don't have DHCP, then hit Control+C to cancel >> DHCP (net0 08:00:27:99:6e:d4).... ok >> Here we go! >> http://serverbeach1.fedoraproject.org/pub/alt/bfo/pxelinux.0. >> PXELINUX 3.75 2009-04-16 �Copyright (C) 1994-2009 H. Peter Anvin et al >> !PXE entry point found (we hope) at 9C59:044A via plan A >> UNDI code segment at 9C59 len 0814 >> UNDI data segment at 9CDB len 2E48 >> Getting cached packet 01 02 03 >> My IP address seems to be C0A82039 192.168.32.57 >> ip=192.168.32.57:192.168.37.9:192.168.32.1:255.255.254.0 >> TFTP prefix: http://serverbeach1.fedoraproject.org/pub/alt/bfo/ >> Trying to load: pxelinux.cfg/default >> >> Is this expected to work at this point? >> >> -- >> Chris Kloiber >> >> >> >> -- >> test mailing list >> test@lists.fedoraproject.org >> To unsubscribe: >> https://admin.fedoraproject.org/mailman/listinfo/test >> > > yes, for me works > > what are your network card ? >