Kudzu fails with segfault on FC5 Test 3 on HP Pavilion ZE2108WM Notebook with the message "Checking for hardware changes/etc/rc5.d/S05kudzu: line 23: 1357 Segmentation fault /sbin/kudzu $KUDZU_ARGS [FAILED]".
This occurs with SELinux enabled or disabled or upon relabeling.
The kernel running is the original FC5t3 kernel-2.6.15-1.1955_FC5hypervisor-i686.
The notebook uses a 1.6 GHz AMD Mobile Sempron™ Processor 2800+ with PowerNow!™ Technology.
The output of lspci for this machine is:
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11) 00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge 00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02) 00:14.6 Modem: ATI Technologies Inc: Unknown device 4378 (rev 02) 01:05.0 VGA compatible controller: ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 05:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) 05:09.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
Bug filed: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=182220
Stanton Finley http://stanton-finley.net/
On Mon, 2006-02-20 at 21:52 -0700, Stanton Finley wrote:
Kudzu fails with segfault on FC5 Test 3 on HP Pavilion ZE2108WM Notebook with the message "Checking for hardware changes/etc/rc5.d/S05kudzu: line 23: 1357 Segmentation fault /sbin/kudzu $KUDZU_ARGS [FAILED]".
This occurs with SELinux enabled or disabled or upon relabeling.
The kernel running is the original FC5t3 kernel-2.6.15-1.1955_FC5hypervisor-i686.
The notebook uses a 1.6 GHz AMD Mobile Sempron™ Processor 2800+ with PowerNow!™ Technology.
This problem does not occur with the non-hypervisor kernel. This begs the question should the hypervisor kernel be installed by default for this processor?
Stanton Finley http://stanton-finley.net/
Stanton Finley (stanfinley@comcast.net) said:
On Mon, 2006-02-20 at 21:52 -0700, Stanton Finley wrote:
Kudzu fails with segfault on FC5 Test 3 on HP Pavilion ZE2108WM Notebook with the message "Checking for hardware changes/etc/rc5.d/S05kudzu: line 23: 1357 Segmentation fault /sbin/kudzu $KUDZU_ARGS [FAILED]".
This occurs with SELinux enabled or disabled or upon relabeling.
The kernel running is the original FC5t3 kernel-2.6.15-1.1955_FC5hypervisor-i686.
The notebook uses a 1.6 GHz AMD Mobile Sempron™ Processor 2800+ with PowerNow!™ Technology.
This problem does not occur with the non-hypervisor kernel. This begs the question should the hypervisor kernel be installed by default for this processor?
Did you ask for the HV kernel or for virtualization?
Bill
On Tue, 2006-02-21 at 12:02 -0500, Bill Nottingham wrote:
Did you ask for the HV kernel or for virtualization?
Bill
Bill, I probably unwittingly asked for virtualization by checking everything at installation time in order to get a complete system to test. Should I not expect kudzu to work with the HV kernel?
Stanton Finley http://stanton-finley.net/
Stanton Finley (stanfinley@comcast.net) said:
Bill, I probably unwittingly asked for virtualization by checking everything at installation time in order to get a complete system to test. Should I not expect kudzu to work with the HV kernel?
Well, you should expect it to work, but it's known that it doesn't. :)
Bill
On 2/21/06, Bill Nottingham notting@redhat.com wrote:
Stanton Finley (stanfinley@comcast.net) said:
Bill, I probably unwittingly asked for virtualization by checking everything at installation time in order to get a complete system to test. Should I not expect kudzu to work with the HV kernel?
Well, you should expect it to work, but it's known that it doesn't. :)
[noted by Stanton in another message] https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=179013
Is this the same issue as with x86_64 (and nVidia)? Or is there a separate bug for that?
Jonathan
On 2/22/06, Bill Nottingham notting@redhat.com wrote:
Jonathan Berry (berryja@gmail.com) said:
Is this the same issue as with x86_64 (and nVidia)? Or is there a separate bug for that?
There is a separate bug, and it *should* be fixed with kudzu-1.2.31-1 in rawhide today.
Finally got a chance to install Core 5 Test 3. After updates looks like kudzu does in fact not segfault : ). kudzu-1.2.32-1 Thanks Bill!
Jonathan
On Tue, 2006-02-21 at 12:02 -0500, Bill Nottingham wrote:
Did you ask for the HV kernel or for virtualization?
Bill
Bill, sorry. I just got notice of the bug already being addressed. ( https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=179013 )
Stanton Finley http://stanton-finley.net/
-
Bill Nottingham -
Jonathan Berry -
Stanton Finley