users June 2017

users@lists.fedoraproject.org

104 participants
95 discussions

Using mrtg to monitor cable modem utilization
by Alex 09 Jun '17

09 Jun '17

[first time went without a subject somehow...] Hi, Anyone still using mrtg these days? I'm trying to set up mrtg on my fedora25 system connected to a cable modem (35Mbit up, 5Mbit down) on one side and a gigabit ethernet on the other and can't figure out how to reflect that in the config file. Maybe you have an idea for monitoring utilization using another method? I'm trying to set it up to determine utilization, so it's important to define the upper bound for both upload and download. Is this possible? If I recall, isn't there a way to define input max and output max? I've run the following cfgmaker command: # cfgmaker --ifref=descr --ifdesc=alias -zero-speed=5000000 mysnmppass(a)orion.example.com Here is the ifconfig output for my system. I've also included the generated cfgmaker output (with 'example' as my domain) below. I don't understand why it's defined eth0 and eth1 as 125MBit when it's connected to a bridge on a gigabit network, and why it's chosen 625kbit for br0 when I've tried to define it as 5Mbit. br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 68.111.193.42 netmask 255.255.255.248 broadcast 68.111.193.47 inet6 fe80::ec4:7aff:fea9:18de prefixlen 64 scopeid 0x20<link> ether 0c:c4:7a:a9:18:de txqueuelen 1000 (Ethernet) RX packets 5891321629 bytes 2564661840218 (2.3 TiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 3670532823 bytes 22827372375556 (20.7 TiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 br0:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 68.111.193.44 netmask 255.255.255.248 broadcast 68.111.193.47 ether 0c:c4:7a:a9:18:de txqueuelen 1000 (Ethernet) eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 0c:c4:7a:a9:18:de txqueuelen 1000 (Ethernet) RX packets 6303244831 bytes 2755299573703 (2.5 TiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 18098110833 bytes 24060466118480 (21.8 TiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device memory 0xfb120000-fb13ffff eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::ec4:7aff:fea9:18df prefixlen 64 scopeid 0x20<link> ether 0c:c4:7a:a9:18:df txqueuelen 1000 (Ethernet) RX packets 22104249713 bytes 13271044125506 (12.0 TiB) RX errors 0 dropped 0 overruns 44 frame 0 TX packets 16730830652 bytes 3413227489426 (3.1 TiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device memory 0xfb100000-fb11ffff eth1:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255 ether 0c:c4:7a:a9:18:df txqueuelen 1000 (Ethernet) device memory 0xfb100000-fb11ffff eth1:1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.100 netmask 255.255.255.0 broadcast 192.168.1.255 ether 0c:c4:7a:a9:18:df txqueuelen 1000 (Ethernet) device memory 0xfb100000-fb11ffff eth1:2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.6.1 netmask 255.255.255.0 broadcast 192.168.6.255 ether 0c:c4:7a:a9:18:df txqueuelen 1000 (Ethernet) device memory 0xfb100000-fb11ffff eth1:3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.101 netmask 255.255.255.0 broadcast 192.168.1.255 ether 0c:c4:7a:a9:18:df txqueuelen 1000 (Ethernet) device memory 0xfb100000-fb11ffff lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1 (Local Loopback) RX packets 55198240 bytes 9250184967 (8.6 GiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 55198240 bytes 9250184967 (8.6 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255 ether 52:54:00:63:b9:2a txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 vnet0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::fc54:ff:fe35:dd67 prefixlen 64 scopeid 0x20<link> ether fe:54:00:35:dd:67 txqueuelen 1000 (Ethernet) RX packets 174594324 bytes 160713095174 (149.6 GiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 200965168 bytes 104887504535 (97.6 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 vnet1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::fc54:ff:fe35:dd66 prefixlen 64 scopeid 0x20<link> ether fe:54:00:35:dd:66 txqueuelen 1000 (Ethernet) RX packets 16552006 bytes 139318192739 (129.7 GiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 30615686 bytes 3092083364 (2.8 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 Here is the mrtg.cfg with the disabled interfaces and unnecessary HTML removed. I've also included the cfgmaker snmp info below. EnableIPv6: no Target[orion.example.com_eth0]: \eth0:mysnmppass@orion.example.com: SetEnv[orion.example.com_eth0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="eth0" MaxBytes[orion.example.com_eth0]: 125000000 Title[orion.example.com_eth0]: eth0 -- orion.inside.example.com PageTop[orion.example.com_eth0]: <h1>eth0 -- orion.inside.example.com</h1> Target[orion.example.com_eth1]: \eth1:mysnmppass@orion.example.com: SetEnv[orion.example.com_eth1]: MRTG_INT_IP="192.168.6.1" MRTG_INT_DESCR="eth1" MaxBytes[orion.example.com_eth1]: 125000000 Title[orion.example.com_eth1]: eth1 -- orion.inside.example.com PageTop[orion.example.com_eth1]: <h1>eth1 -- orion.inside.example.com</h1> Target[orion.example.com_br0]: \br0:mysnmppass@orion.example.com: SetEnv[orion.example.com_br0]: MRTG_INT_IP="68.111.193.42" MRTG_INT_DESCR="br0" MaxBytes[orion.example.com_br0]: 625000 Title[orion.example.com_br0]: br0 -- orion.inside.example.com PageTop[orion.example.com_br0]: <h1>br0 -- orion.inside.example.com</h1> Target[orion.example.com_vnet0]: \vnet0:mysnmppass@orion.example.com: SetEnv[orion.example.com_vnet0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="vnet0" MaxBytes[orion.example.com_vnet0]: 1250000 Title[orion.example.com_vnet0]: vnet0 -- orion.inside.example.com PageTop[orion.example.com_vnet0]: <h1>vnet0 -- orion.inside.example.com</h1> Target[orion.example.com_vnet1]: \vnet1:mysnmppass@orion.example.com: SetEnv[orion.example.com_vnet1]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="vnet1" MaxBytes[orion.example.com_vnet1]: 1250000 Title[orion.example.com_vnet1]: vnet1 -- orion.inside.example.com PageTop[orion.example.com_vnet1]: <h1>vnet1 -- orion.inside.example.com</h1> --base: Get Device Info on mysnmppass(a)orion.example.com: --base: Vendor Id: Unknown Vendor - 1.3.6.1.4.1.8072.3.2.10 --base: Populating confcache --base: Get Interface Info --base: Walking ifIndex --snpd: mysnmppass(a)orion.example.com: -> 1 -> ifIndex = 1 --snpd: mysnmppass(a)orion.example.com: -> 2 -> ifIndex = 2 --snpd: mysnmppass(a)orion.example.com: -> 3 -> ifIndex = 3 --snpd: mysnmppass(a)orion.example.com: -> 4 -> ifIndex = 4 --snpd: mysnmppass(a)orion.example.com: -> 5 -> ifIndex = 5 --snpd: mysnmppass(a)orion.example.com: -> 6 -> ifIndex = 6 --snpd: mysnmppass(a)orion.example.com: -> 7 -> ifIndex = 7 --snpd: mysnmppass(a)orion.example.com: -> 8 -> ifIndex = 8 --snpd: mysnmppass(a)orion.example.com: -> 9 -> ifIndex = 9 --base: Walking ifType --snpd: mysnmppass(a)orion.example.com: -> 1 -> ifType = 24 --snpd: mysnmppass(a)orion.example.com: -> 2 -> ifType = 6 --snpd: mysnmppass(a)orion.example.com: -> 3 -> ifType = 6 --snpd: mysnmppass(a)orion.example.com: -> 4 -> ifType = 6 --snpd: mysnmppass(a)orion.example.com: -> 5 -> ifType = 131 --snpd: mysnmppass(a)orion.example.com: -> 6 -> ifType = 6 --snpd: mysnmppass(a)orion.example.com: -> 7 -> ifType = 6 --snpd: mysnmppass(a)orion.example.com: -> 8 -> ifType = 6 --snpd: mysnmppass(a)orion.example.com: -> 9 -> ifType = 6 --base: Walking ifAdminStatus --snpd: mysnmppass(a)orion.example.com: -> 1 -> ifAdminStatus = 1 --snpd: mysnmppass(a)orion.example.com: -> 2 -> ifAdminStatus = 1 --snpd: mysnmppass(a)orion.example.com: -> 3 -> ifAdminStatus = 1 --snpd: mysnmppass(a)orion.example.com: -> 4 -> ifAdminStatus = 1 --snpd: mysnmppass(a)orion.example.com: -> 5 -> ifAdminStatus = 2 --snpd: mysnmppass(a)orion.example.com: -> 6 -> ifAdminStatus = 1 --snpd: mysnmppass(a)orion.example.com: -> 7 -> ifAdminStatus = 2 --snpd: mysnmppass(a)orion.example.com: -> 8 -> ifAdminStatus = 1 --snpd: mysnmppass(a)orion.example.com: -> 9 -> ifAdminStatus = 1 --base: Walking ifOperStatus --snpd: mysnmppass(a)orion.example.com: -> 1 -> ifOperStatus = 1 --snpd: mysnmppass(a)orion.example.com: -> 2 -> ifOperStatus = 1 --snpd: mysnmppass(a)orion.example.com: -> 3 -> ifOperStatus = 1 --snpd: mysnmppass(a)orion.example.com: -> 4 -> ifOperStatus = 1 --snpd: mysnmppass(a)orion.example.com: -> 5 -> ifOperStatus = 2 --snpd: mysnmppass(a)orion.example.com: -> 6 -> ifOperStatus = 2 --snpd: mysnmppass(a)orion.example.com: -> 7 -> ifOperStatus = 2 --snpd: mysnmppass(a)orion.example.com: -> 8 -> ifOperStatus = 1 --snpd: mysnmppass(a)orion.example.com: -> 9 -> ifOperStatus = 1 --base: Walking ifMtu --snpd: mysnmppass(a)orion.example.com: -> 1 -> ifMtu = 65536 --snpd: mysnmppass(a)orion.example.com: -> 2 -> ifMtu = 1500 --snpd: mysnmppass(a)orion.example.com: -> 3 -> ifMtu = 1500 --snpd: mysnmppass(a)orion.example.com: -> 4 -> ifMtu = 1500 --snpd: mysnmppass(a)orion.example.com: -> 5 -> ifMtu = 1332 --snpd: mysnmppass(a)orion.example.com: -> 6 -> ifMtu = 1500 --snpd: mysnmppass(a)orion.example.com: -> 7 -> ifMtu = 1500 --snpd: mysnmppass(a)orion.example.com: -> 8 -> ifMtu = 1500 --snpd: mysnmppass(a)orion.example.com: -> 9 -> ifMtu = 1500 --base: Walking ifSpeed --snpd: mysnmppass(a)orion.example.com: -> 1 -> ifSpeed = 10000000 --snpd: mysnmppass(a)orion.example.com: -> 2 -> ifSpeed = 1000000000 --snpd: mysnmppass(a)orion.example.com: -> 3 -> ifSpeed = 1000000000 --snpd: mysnmppass(a)orion.example.com: -> 4 -> ifSpeed = 0 --snpd: mysnmppass(a)orion.example.com: -> 5 -> ifSpeed = 0 --snpd: mysnmppass(a)orion.example.com: -> 6 -> ifSpeed = 0 --snpd: mysnmppass(a)orion.example.com: -> 7 -> ifSpeed = 10000000 --snpd: mysnmppass(a)orion.example.com: -> 8 -> ifSpeed = 10000000 --snpd: mysnmppass(a)orion.example.com: -> 9 -> ifSpeed = 10000000

2 2

Wammu questions
by JD 09 Jun '17

09 Jun '17

On a machine which has installed gammu-libs dialog gammu python-gammu wammu wammu configure (using automatic detection) is unable to find a connected phone, even though, when I plug in the usb cable, I get a popup on the screen of the gnome directory browser of the phone's storage. So, how do I proceed from here? Thax to all wammu users for any help with this.

4 9

Seem to have screwed my F25......
by DB 07 Jun '17

07 Jun '17

Evening all, I thought it would be a Good Idea to "improve" my Fedora system if I added an SDD. I put it in, plugged it in & it seemed to work - sort of.... What I now have is a selection window from grub which has 2 new versions of F25 Workstation (on sda), then an F19, also on sda, followed by the F25 on sdb (my SDD). What I would like to do is to remove the 2 new F25s because the one was only stated to allow me to boot the system; remove the F19 & put F25 on sdb as the default. I hope that doing something like this would mean that (system) updates would be applied to the SDD F25, and that I would be able to access all the software I have on /home...... Does anyone have any ideas how I might be able to do this??? Would I need to change any of my SATA cables to make sdb into sda??? Many thanks for any suggestions!!!!! Dave

2 1

2 mice: left & right handed
by andrea 07 Jun '17

07 Jun '17

Hi, running F25 GNOME on Wayland and have 2 mice. One on the left and one on the right of the keyboard. I would like to set the left as left handed and the right as right handed. In GNOME settings I cannot change it per mouse, rather for all of the at the same time. I read that this is a libinput matter, but I cannot find how to do it. Any suggestions? Andrea

10 16

Modern webmail client
by Alex 07 Jun '17

07 Jun '17

Hi, we have fedora25 set up with apache and dovecot and have been using squirrelmail. We're looking to replace squirrelmail with something more modern and "responsive" on mobile. Before I start installing and testing roundcube, rainloop, and the others, I thought I would ask this list if they have a preference for users on mobile? I've searched for an updated review of all the main players these days, but the most recent appears to be from 2015. Thanks, Alex

8 16

RE: Modern webmail client
by J.Witvliet＠mindef.nl 07 Jun '17

07 Jun '17

Some {free) WIFI-providers block much else besides 80 & 443. That’s the only sensible reason for using webnail. -----Original Message----- From: Tom Horsley [mailto:horsley1953@gmail.com] Sent: dinsdag 6 juni 2017 21:37 To: users(a)lists.fedoraproject.org Subject: Re: Modern webmail client On Tue, 6 Jun 2017 15:27:51 -0400 Alex wrote: > > Why wouldn't you just use an IMAP client on the phone? > > Yes, I agree, and that's what I've asked them to do, but they still > prefer the webmail client. Then that means they prefer squirrelmail, right? So you might as well keep using it or they'll hate the replacement just as irrationally :-). _______________________________________________ users mailing list -- users(a)lists.fedoraproject.org To unsubscribe send an email to users-leave(a)lists.fedoraproject.org Dit bericht kan informatie bevatten die niet voor u is bestemd. Indien u niet de geadresseerde bent of dit bericht abusievelijk aan u is toegezonden, wordt u verzocht dat aan de afzender te melden en het bericht te verwijderen. De Staat aanvaardt geen aansprakelijkheid voor schade, van welke aard ook, die verband houdt met risico's verbonden aan het elektronisch verzenden van berichten. This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. The State accepts no liability for damage of any kind resulting from the risks inherent in the electronic transmission of messages.

1 0

Running Starcraft?
by Dave Johansen 06 Jun '17

06 Jun '17

Has anyone been able to get the free version of Starcraft up and running? I ran into the issue where ClientSdk.dll won't initialize ( https://bugs.winehq.org/show_bug.cgi?id=42741 ). Any ideas on how I can get it working? Thanks, Dave

2 2

VPN l2tp+ipsec: not work with last kernel 4.11.3-200
by Dario Lesca 06 Jun '17

06 Jun '17

Yesterday I have update my fedora 25 and after reboot VPN l2tp+ipsec do not work anymore. The connection happens without problem, the routing are set correctly, the DNS (UDP protocol) and ping (ICMP protocol) to remote host work. Only the access to some server, like ssh or smb:// (TCP protocol) do not work, in this case, if I monitoring on remote server with tcpdump, none arrives. If I reboot with previous kernel (4.10.17) all work fine. Some suggest? Many thanks -- Dario Lesca (inviato dal mio Linux Fedora 25 Workstation)

2 4

Difficulties at very first steps with f25kde ...
by Walter H. 05 Jun '17

05 Jun '17

Hello, my older computer is a Core2Quad with 4 GB RAM had a hard disk with a Windows 10 what I did: - I plugged this harddisk as harddisk 2 and added an empty harddisk as harddisk 1 - I downloaded Fedora 25 KDE (Fedora-KDE-Live-x86_64-25-1.3.iso) and burnt this to a DVD - I installed this onto harddisk 1, the boot menu entry for the 2nd harddisk with Windows 10 was added automatically I gave fixed IPv4 (an RFC1918 addr) and IPv6 (my HE tunnel range) addresses - after the first login I had to enable sshd - why isn't this automatically? - with systemctl enable sshd systemctl start sshd now I could do SSH from my newer computer (Windows) - I did an yum update and this updated more than 800 packages and downloaded nearly 1 GByte after this I rebootet - I successfully installed postfix as MTA and logwatch, works as expected - why is the logwatch mail 'precedence bulk'? - I also needed the graphical connection and found this: https://www.server-world.info/en/note?os=Fedora_24&p=desktop&f=7 there I have a strange phenomen after the connection with mstsc, I get a window where I can select between Xvnc and Xorg, when selecting Xvnc and entering userid and password the window is closed and session blown away ... when I select Xorg and enter userid and password the window stays 'green' forever /var/log/xrdp.log shows this: [20170604-21:40:08] [INFO ] starting xrdp with pid 1406 [20170604-21:40:10] [INFO ] listening to port 3389 on 0.0.0.0 [20170604-21:42:07] [INFO ] Socket 12: AF_INET connection received from 172.23.2.7 port 4333 [20170604-21:42:07] [DEBUG] Closed socket 12 (AF_INET 172.23.1.7:3389) [20170604-21:42:07] [DEBUG] Closed socket 11 (AF_INET 0.0.0.0:3389) [20170604-21:42:07] [INFO ] Using default X.509 certificate: /etc/xrdp/cert.pem [20170604-21:42:07] [INFO ] Using default X.509 key file: /etc/xrdp/key.pem [20170604-21:42:07] [DEBUG] TLSv1.2 enabled [20170604-21:42:07] [DEBUG] TLSv1.1 enabled [20170604-21:42:07] [DEBUG] TLSv1 enabled [20170604-21:42:07] [DEBUG] Security layer: requested 1, selected 1 [20170604-21:42:07] [INFO ] connected client computer name: XP64WALDI01-W01 [20170604-21:42:07] [INFO ] TLS connection established from 172.23.2.7 port 4333: TLSv1 with cipher DES-CBC3-SHA [20170604-21:42:07] [DEBUG] xrdp_00000604_wm_login_mode_event_00000001 [20170604-21:42:07] [INFO ] Cannot find keymap file /etc/xrdp/km-00020409.ini [20170604-21:42:07] [INFO ] Loading keymap file /etc/xrdp/km-00000409.ini [20170604-21:42:07] [WARN ] local keymap file for 0x00020409 found and doesn't match built in keymap, using local keymap file [20170604-21:42:16] [DEBUG] xrdp_wm_log_msg: connecting to sesman ip 127.0.0.1 port 3350 [20170604-21:42:17] [INFO ] xrdp_wm_log_msg: sesman connect ok [20170604-21:42:17] [DEBUG] xrdp_wm_log_msg: sending login info to session manager, please wait... [20170604-21:42:17] [DEBUG] return value from xrdp_mm_connect 0 [20170604-21:42:17] [INFO ] xrdp_wm_log_msg: login successful for display 10 [20170604-21:42:17] [DEBUG] xrdp_wm_log_msg: VNC started connecting [20170604-21:42:18] [DEBUG] xrdp_wm_log_msg: VNC connecting to 127.0.0.1 5910 [20170604-21:42:20] [DEBUG] xrdp_wm_log_msg: VNC tcp connected [20170604-21:42:20] [DEBUG] xrdp_wm_log_msg: VNC security level is 2 (1 = none, 2 = standard) [20170604-21:42:20] [DEBUG] xrdp_wm_log_msg: VNC password ok [20170604-21:42:20] [DEBUG] xrdp_wm_log_msg: VNC sending share flag [20170604-21:42:20] [DEBUG] xrdp_wm_log_msg: VNC receiving server init [20170604-21:42:20] [DEBUG] xrdp_wm_log_msg: VNC receiving pixel format [20170604-21:42:20] [DEBUG] xrdp_wm_log_msg: VNC receiving name length [20170604-21:42:20] [DEBUG] xrdp_wm_log_msg: VNC receiving name [20170604-21:42:20] [DEBUG] xrdp_wm_log_msg: VNC sending pixel format [20170604-21:42:20] [DEBUG] xrdp_wm_log_msg: VNC sending encodings [20170604-21:42:21] [DEBUG] xrdp_wm_log_msg: VNC sending framebuffer update request [20170604-21:42:21] [DEBUG] xrdp_wm_log_msg: VNC sending cursor [20170604-21:42:21] [DEBUG] xrdp_wm_log_msg: VNC connection complete, connected ok [20170604-21:42:21] [INFO ] The following channel is allowed: rdpdr (0) [20170604-21:42:21] [INFO ] The following channel is allowed: rdpsnd (1) [20170604-21:42:21] [INFO ] The following channel is allowed: drdynvc (2) [20170604-21:42:21] [INFO ] The following channel is allowed: cliprdr (3) [20170604-21:42:21] [DEBUG] The allow channel list now initialized for this session [20170604-21:42:21] [DEBUG] xrdp_wm_log_msg: connected ok [20170604-21:42:21] [DEBUG] xrdp_mm_connect_chansrv: chansrv connect successful [20170604-21:42:21] [DEBUG] Closed socket 18 (AF_INET 127.0.0.1:55588) [20170604-21:42:22] [DEBUG] VNC got clip data [20170604-21:42:22] [DEBUG] Closed socket 12 (AF_INET 172.23.1.7:3389) [20170604-21:42:22] [DEBUG] xrdp_mm_module_cleanup [20170604-21:42:22] [DEBUG] VNC mod_exit [20170604-21:42:23] [DEBUG] Closed socket 19 (AF_INET 127.0.0.1:57730) [20170604-21:42:23] [DEBUG] Closed socket 20 (AF_UNIX) [20170604-21:42:23] [ERROR] Listening socket is in wrong state, terminating listener [20170604-21:42:23] [CORE ] shutting down log subsystem... /var/log/xrdp-sesman.log shows this: [20170604-21:40:08] [DEBUG] libscp initialized [20170604-21:40:09] [INFO ] starting xrdp-sesman with pid 1405 [20170604-21:40:10] [INFO ] listening to port 3350 on 127.0.0.1 [20170604-21:42:16] [INFO ] A connection received from 127.0.0.1 port 55588 [20170604-21:42:17] [INFO ] ++ created session (access granted): username walter, ip 172.23.2.7:4333 - socket: 12 [20170604-21:42:17] [INFO ] starting Xvnc session... [20170604-21:42:17] [DEBUG] Closed socket 9 (AF_INET 0.0.0.0:5910) [20170604-21:42:17] [DEBUG] Closed socket 9 (AF_INET 0.0.0.0:6010) [20170604-21:42:17] [DEBUG] Closed socket 9 (AF_INET 0.0.0.0:6210) [20170604-21:42:17] [DEBUG] Closed socket 8 (AF_INET 127.0.0.1:3350) [20170604-21:42:17] [DEBUG] Closed socket 7 (AF_INET 127.0.0.1:3350) [20170604-21:42:17] [DEBUG] Closed socket 8 (AF_INET 127.0.0.1:3350) [20170604-21:42:18] [INFO ] Xvnc :10 -auth .Xauthority -geometry 1600x1200 -depth 32 -rfbauth/home/walter/.vnc/sesman_walter_passwd:10 -bs -nolisten tcp -localhost -dpi 96 [20170604-21:42:18] [CORE ] waiting for window manager (pid 1552) to exit the 1600x1200 is a little bit bigger as the monitor of the older computer itself, the newer has a 2560x1440 /etc/xrdp/sesman.ini has some weird content [Xvnc] param=Xvnc param=-bs param=-nolisten param=tcp param=-localhost param=-dpi param=96 [Xorg] param=Xorg param=-config param=xrdp/xorg.conf param=-noreset param=-nolisten param=tcp param=-logfile param=.xorgxrdp.%s.log shouldn't this look like [Xvnc] param=-bs param=-nolisten tcp param=-localhost param=-dpi 96 [Xorg] param=-config xrdp/xorg.conf param=-noreset param=-nolisten tcp param=-logfile .xorgxrdp.%s.log the next strange thing in connection with firefox ... when setting a proxy with DNS name, I get errors, that the proxy is not found; entering the IPv4 or IPv6 address this works ... (entering host proxy.local it gives the IPv4 and IPv6 address - my DNS is working properly) Thanks for help or some explanation Walter

3 12

Dependency failed for session? WTF?
by Tom Horsley 05 Jun '17

05 Jun '17

Anyone know what this gibberish that shows up in my logwatch means? Dependency failed for Session 10084 of user nvtest.: 1 Time(s) Dependency failed for Session 10363 of user nvtest.: 1 Time(s) ... Dependency failed for User Manager for UID 25130.: 59 Time(s) session-10084.scope: Job session-10084.scope/start failed with result 'dependency'.: 1 Time(s) session-10363.scope: Job session-10363.scope/start failed with result 'dependency'.: 1 Time(s) ... user-25130.slice: Start request repeated too quickly.: 118 Time(s) user(a)25130.service: Failed at step CGROUP spawning /usr/lib/systemd/systemd: No such file or directory: 196 Time(s) user(a)25130.service: Job user(a)25130.service/start failed with result 'dependency'.: 59 Time(s) Notes: User nvtest is UID 25130 tomh> ls -l /usr/lib/systemd/systemd -rwxr-xr-x 1 root root 1641008 Feb 7 08:05 /usr/lib/systemd/systemd* The CGROUP error makes no sense because /usr/lib/systemd/systemd clearly does exist. User nvtest is used to run testbeds via ssh, all those errors almost certainly happened when a test run was using my system as a remote test target and logging in via ssh for each individual test to run a specific remote program (not a normal shell, though that remote program usually starts a shell). Meanwhile, despite all these silly errors in the log, the actual test run appeared to work fine. What new nonsense hath systemd wrought?

2 2

← Newer
1
2
3
4
5
6
7
8
9
10
Older →