users October 2019

users@lists.fedoraproject.org

84 participants
70 discussions

F31 interesting copying speed
by Joerg Lechner 31 Oct '19

31 Oct '19

Hi,I copy TV films, recorded with my laptop, from the laptop internal disk to external USB2.1 connected disks. Result with Win 10, Win 10 on the laptop internal disk copying speed about 21 mb/sec, copying with F29 (I omitted F30) F29 on an USB3.0 stick, copying speed about 25 mb/sec, F31 on the same USB3.0 stick, leading the copying process from the laptop internal disk to the external disk, about 34mb/sec copying speed. kind RegardsJoerg

1 0

Has system.config-users been discontinued with FC31?
by Erik P. Olsen 31 Oct '19

31 Oct '19

I can't find system-config-users in FC31. Is there a replacement for it? -- Erik P. Olsen - Copenhagen, Denmark Fedora 30/64 bit Linux xfce Claws-Mail POP3 Gramps 5.1.1

4 5

31 Oct '19

After updating to F31, I was playing with different display managers. Normally use KDE. I tried deepin, and liked it, but scaling seemed a bit off. I changed display scaling to 1.5. I was told I needed to logout/in for setting to take effect, which I did. Then login to deepin all I get is black screen with cursor. Tried login to kde. Same result. I finally was able to restore my .config directory from a backup (using CLI) and I'm back in business. My question for this group is, what happened? I wish I knew which config file got messed up so I could fix more easily. Thanks, Neal

2 1

/boot/efi on RAID-1 (mdraid)
by Sam Varshavchik 31 Oct '19

31 Oct '19

I installed F30 on a replacement server with two HDDs. My existing hardware earned its well-deserved retirement. My replacement hardware is the first server hardware I'm using that uses EFI and the GPT. I configured all my partitions with mdraid, including /boot/efi: /dev/md124 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077, codepage=437,iocharset=ascii,shortname=winnt,errors=remount-ro) /dev/md124: Version : 1.0 Creation Time : Sat Oct 26 20:49:42 2019 Raid Level : raid1 Array Size : 1049536 (1024.94 MiB 1074.72 MB) Used Dev Size : 1049536 (1024.94 MiB 1074.72 MB) [ . . . ] Number Major Minor RaidDevice State 0 8 4 0 active sync /dev/sda4 1 8 20 1 active sync /dev/sdb4 I want to make sure that in the event one of the disks fail I'll be able to boot off the other one. Are any additional steps needed for this, beyond the ones that were done by F30's installer? With BIOS I knew I needed to run grub-install to manually install grub on /dev/sdb in addition to /dev/sda; do I need to do anything analogous to that, with EFI?

4 5

USB WIFI adapters
by Robert McBroom 30 Oct '19

30 Oct '19

I've been searching for a USB WIFI adapter to allow my laptop to access the 5GHz band. The market seems to be dominated by Realtek but Fedora 29 doesn't seem to have drivers for the various chips. Found an adapter from BrosTrend that said it supported LINUX without noticing that the support was for the slow cycle DEBIAN. With a clue from support found the driver on github. I was successful in getting the driver from https://github.com/zebulon2/rtl8812au to install on a Fedora 29 system with the 4.20 version of the kernel. Had to get the newer version from https://github.com/gordboy/rtl8812au for installation on a second Fedora 29 system running the 5.2 kernel. This version also installed on the newer 5.3 kernels.

4 3

the bytmax98090 sound card
by mattias 30 Oct '19

30 Oct '19

are there a working driver for that card? maybe in rawhide? the card are in a chromebook acer r11 cb5132t

2 2

Trouble connecting to a specific WiFi ssid (association timeout)
by cen 30 Oct '19

30 Oct '19

Hi Up-to-date Fedora 30 Thinkpad x260, Intel wifi, wpa_supplicant v2.8 I got a brand new tp-link archer c6 and set up 2.4Ghz mixed ssid and 5Ghz ac/mixed ssid. I can connect to 5GHz just fine but 2.4GHz gives association timeout (see dmesg below). It just keeps asking for password every 20 seconds to infinity. This is the only 2.4 b/g/n ssid that I have trouble connecting with, ever. My android phone and 2 windows laptops can connect to this ssid just fine so there must be a very specific problem with my laptop/Fedora combo. I have yet to try with an unsecured ssid, that is next on the debug list, currently it is set to WPA2 personal/AES. Anything else I can try to solve this mystery? [Tue Oct 29 21:42:32 2019] wlp4s0: authenticate with 98:da:c4:85:f5:f1 [Tue Oct 29 21:42:32 2019] wlp4s0: send auth to 98:da:c4:85:f5:f1 (try 1/3) [Tue Oct 29 21:42:32 2019] wlp4s0: authenticated [Tue Oct 29 21:42:32 2019] wlp4s0: associate with 98:da:c4:85:f5:f1 (try 1/3) [Tue Oct 29 21:42:32 2019] wlp4s0: associate with 98:da:c4:85:f5:f1 (try 2/3) [Tue Oct 29 21:42:32 2019] wlp4s0: associate with 98:da:c4:85:f5:f1 (try 3/3) [Tue Oct 29 21:42:32 2019] wlp4s0: association with 98:da:c4:85:f5:f1 timed out [Tue Oct 29 21:42:34 2019] wlp4s0: authenticate with 98:da:c4:85:f5:f1 [Tue Oct 29 21:42:34 2019] wlp4s0: send auth to 98:da:c4:85:f5:f1 (try 1/3) [Tue Oct 29 21:42:34 2019] wlp4s0: send auth to 98:da:c4:85:f5:f1 (try 2/3) [Tue Oct 29 21:42:34 2019] wlp4s0: authenticated [Tue Oct 29 21:42:34 2019] wlp4s0: associate with 98:da:c4:85:f5:f1 (try 1/3) [Tue Oct 29 21:42:34 2019] wlp4s0: associate with 98:da:c4:85:f5:f1 (try 2/3) [Tue Oct 29 21:42:34 2019] wlp4s0: associate with 98:da:c4:85:f5:f1 (try 3/3) [Tue Oct 29 21:42:34 2019] wlp4s0: association with 98:da:c4:85:f5:f1 timed out [Tue Oct 29 21:42:35 2019] wlp4s0: authenticate with 98:da:c4:85:f5:f1 [Tue Oct 29 21:42:35 2019] wlp4s0: send auth to 98:da:c4:85:f5:f1 (try 1/3) [Tue Oct 29 21:42:36 2019] wlp4s0: send auth to 98:da:c4:85:f5:f1 (try 2/3) [Tue Oct 29 21:42:36 2019] wlp4s0: authenticated [Tue Oct 29 21:42:36 2019] wlp4s0: associate with 98:da:c4:85:f5:f1 (try 1/3) [Tue Oct 29 21:42:36 2019] wlp4s0: associate with 98:da:c4:85:f5:f1 (try 2/3) [Tue Oct 29 21:42:36 2019] wlp4s0: associate with 98:da:c4:85:f5:f1 (try 3/3) [Tue Oct 29 21:42:36 2019] wlp4s0: association with 98:da:c4:85:f5:f1 timed out

2 3

NoScript extension for Firefox
by Antonio M 30 Oct '19

30 Oct '19

After upgrading to F31, I cannot change options in the list, i.e. from Trusted to temporarily trusted. What I am missing?? Antonio Montagnani Linux Fedora 31 Workstation da/from Gmail

1 0

F31RC1.9 install fails on Ryzen 7 3800X if file system encryption is enabled
by Eric Smith 30 Oct '19

30 Oct '19

I have a new Ryzen 7 3800X system, and since Fedora 30 won't install on that, I tried Fedora 31 RC1.9 Workstation Live. That boots up fine, but when I try to install to my "disk" (M.2 NVMe), if file system encryption is enabled, it hangs at "Creating luks on /dev/nvme0n1p6". I let it sit there for 20 minutes with no progress made. If I install with file system encryption disabled, it installs fine. Maybe this is more fallout from the RDRAND problem?

3 6

Re: Please read over my upgrade notes
by ToddAndMargo 30 Oct '19

30 Oct '19

On 10/30/19 8:36 AM, Doug H. wrote: > On Tue, 2019-10-29 at 22:37 -0700, ToddAndMargo via users wrote: >> Hi All, >> >> This is my upgrade notes for upgrading from FC29 to FC30. >> Has anything changed I need to update my notes? >> Well, except for "--releasever=31". >> >> >> FC 29 -->> FC 30: >> >> # rpm --rebuilddb >> # rpm -Va --nofiles --nodigest >> if anything is too new, do a >> # dnf downgrade offender(s) >> >> # dnf --enablerepo=* update --refresh >> # dnf install python3-dnf-plugin-system-upgrade >> # dnf system-upgrade download --refresh --releasever=30 -- >> allowerasing >> --best >> # dnf clean packages <-- optional >> # dnf system-upgrade reboot > > > Or maybe just a note to always check: > > https://docs.fedoraproject.org/en-US/quick-docs/dnf-system-upgrade/ > > Note that it only suggests the rpm rebuild *after* the upgrade. But I > guess it does not hurt to run it before hand to avoid issues. I check that first. It is not always inclusive of things that can go wrong, such as the rpm -Va thing. This is what I have so far: FC 30 -->> FC 31: https://docs.fedoraproject.org/en-US/quick-docs/dnf-system-upgrade/ # rpm --rebuilddb # rpm -Va --nofiles --nodigest if anything is too new, do a # dnf downgrade offender(s) # dnf --enablerepo=* update --refresh # dnf install python3-dnf-plugin-system-upgrade # dnf system-upgrade download --refresh --releasever=31 --allowerasing --best # rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-31-primary # dnf clean packages <-- optional # dnf system-upgrade reboot

1 0