ldap/servers/plugins/replication/windows_protocol_util.c | 203 +++++++++++----
1 file changed, 159 insertions(+), 44 deletions(-)
New commits:
commit d9fdaf2c29bb2ead7f7a93f0b6b34c26a024a184
Author: Nathan Kinder <nkinder(a)redhat.com>
Date: Wed Jan 27 15:11:23 2010 -0800
Bug 549554 - Trim single-valued attributes before sending to AD
There are a number of attributes that AD defines as single-valued
that are multi-valued in the LDAP RFCs. We already had a few
special cases in the winsync code where we only send one attribute
to AD to allow the change to be accepted. We then simply check if
the value in AD is present in DS when comparing entries for further
changes.
This fix cleans up that old implementation a bit by adding a static
list of these single-valued attributes and a helper function to
check if a particular type is in that list. I also had to extend
the attr_compare_present() function to allow a length to be passed
in for limiting the comparison to a portion of the values. This is
needed for the initials attribute, which is single-valued and length
constrained in AD.
diff --git a/ldap/servers/plugins/replication/windows_protocol_util.c b/ldap/servers/plugins/replication/windows_protocol_util.c
index fdcdc45..65de19d 100644
--- a/ldap/servers/plugins/replication/windows_protocol_util.c
+++ b/ldap/servers/plugins/replication/windows_protocol_util.c
@@ -180,6 +180,30 @@ static char* windows_group_matching_attributes[] =
NULL
};
+/* List of attributes that are single-valued in AD, but multi-valued in DS */
+static char * windows_single_valued_attributes[] =
+{
+ "facsimileTelephoneNumber",
+ "givenName",
+ "homePhone",
+ "homePostalAddress",
+ "initials",
+ "l",
+ "mail",
+ "mobile",
+ "pager",
+ "physicalDeliveryOfficeName",
+ "postalCode",
+ "sn",
+ "st",
+ "street",
+ FAKE_STREET_ATTR_NAME,
+ "streetAddress",
+ "telephoneNumber",
+ "title",
+ NULL
+};
+
/* List of attributes that are common to AD and LDAP, so we simply copy them over in both directions */
static char* nt4_user_matching_attributes[] =
{
@@ -1612,6 +1636,26 @@ is_straight_mapped_attr(const char *type, int is_user /* or group */, int is_nt4
}
return found;
}
+
+static int
+is_single_valued_attr(const char *type)
+{
+ int found;
+ size_t offset = 0;
+ char *this_attr = NULL;
+
+ /* Look for the type in the list of single-valued AD attributes */
+ while ((this_attr = windows_single_valued_attributes[offset]))
+ {
+ if (0 == slapi_attr_type_cmp(this_attr, type, SLAPI_TYPE_CMP_SUBTYPE))
+ {
+ found = 1;
+ break;
+ }
+ offset++;
+ }
+ return found;
+}
static void
windows_map_attr_name(const char *original_type , int to_windows, int is_user, int is_create, char **mapped_type, int *map_dn)
@@ -1740,18 +1784,38 @@ windows_create_remote_entry(Private_Repl_Protocol *prp,Slapi_Entry *original_ent
if ( is_straight_mapped_attr(type,is_user,is_nt4) )
{
+ /* If this attribute is single-valued in AD,
+ * we only want to send the first value. */
+ if (is_single_valued_attr(type))
+ {
+ if (slapi_valueset_count(vs) > 1) {
+ int i = 0;
+ Slapi_Value *value = NULL;
+ Slapi_Value *new_value = NULL;
+
+ i = slapi_valueset_first_value(vs,&value);
+ if (i >= 0) {
+ /* Dup the first value, trash the valueset, then copy in the dup'd value. */
+ new_value = slapi_value_dup(value);
+ slapi_valueset_done(vs);
+ /* The below hands off the memory to the valueset */
+ slapi_valueset_add_value_ext(vs, new_value, SLAPI_VALUE_FLAG_PASSIN);
+ }
+ }
+ }
+
/* The initials attribute is a special case. AD has a constraint
- * that limits the value length. If we're sending a change to
- * the initials attribute to AD, we trim if neccessary.
- */
- if (0 == slapi_attr_type_cmp(type, "initials", SLAPI_TYPE_CMP_SUBTYPE)) {
+ * that limits the value length. If we're sending a change to
+ * the initials attribute to AD, we trim if neccessary.
+ */
+ if (0 == slapi_attr_type_cmp(type, "initials", SLAPI_TYPE_CMP_SUBTYPE)) {
int i = 0;
const char *initials_value = NULL;
- Slapi_Value *value = NULL;
+ Slapi_Value *value = NULL;
- i = slapi_valueset_first_value(vs,&value);
+ i = slapi_valueset_first_value(vs,&value);
while (i >= 0) {
- initials_value = slapi_value_get_string(value);
+ initials_value = slapi_value_get_string(value);
/* If > AD_INITIALS_LENGTH, trim the value */
if (strlen(initials_value) > AD_INITIALS_LENGTH) {
@@ -1767,6 +1831,7 @@ windows_create_remote_entry(Private_Repl_Protocol *prp,Slapi_Entry *original_ent
i = slapi_valueset_next_value(vs, i, &value);
}
}
+
/* copy over the attr values */
slapi_entry_add_valueset(new_entry,type,vs);
} else
@@ -2360,6 +2425,26 @@ windows_map_mods_for_replay(Private_Repl_Protocol *prp,LDAPMod **original_mods,
/* Check to see if this attribute is passed through */
if (is_straight_mapped_attr(attr_type,is_user,is_nt4)) {
+ /* If this attribute is single-valued in AD,
+ * we only want to send the first value. */
+ if (is_single_valued_attr(attr_type)) {
+ Slapi_Mod smod;
+
+ slapi_mod_init_byref(&smod,mod);
+
+ /* Check if there is more than one value */
+ if (slapi_mod_get_num_values(&smod) > 1) {
+ slapi_mod_get_first_value(&smod);
+ /* Remove all values except for the first */
+ while (slapi_mod_get_next_value(&smod)) {
+ /* This modifies the bvalues in the mod itself */
+ slapi_mod_remove_value(&smod);
+ }
+ }
+
+ slapi_mod_done(&smod);
+ }
+
/* The initials attribute is a special case. AD has a constraint
* that limits the value length. If we're sending a change to
* the initials attribute to AD, we trim if neccessary.
@@ -2421,11 +2506,9 @@ windows_map_mods_for_replay(Private_Repl_Protocol *prp,LDAPMod **original_mods,
slapi_valueset_free(vs);
} else
{
- /* AD treats streetAddress as a single-valued attribute, while we define it
- * as a multi-valued attribute as it's defined in rfc 4519. We only
- * sync the first value to AD to avoid a constraint violation.
- */
- if (0 == slapi_attr_type_cmp(mapped_type, "streetAddress", SLAPI_TYPE_CMP_SUBTYPE)) {
+ /* If this attribute is single-valued in AD,
+ * we only want to send the first value. */
+ if (is_single_valued_attr(mapped_type)) {
Slapi_Mod smod;
slapi_mod_init_byref(&smod,mod);
@@ -2533,7 +2616,7 @@ attr_compare_equal(Slapi_Attr *a, Slapi_Attr *b, int n)
* If n is 0, then just compare the entire attribute. */
if ((va->bv.bv_len < n) || (vb->bv.bv_len < n) || (n == 0)) {
if (va->bv.bv_len == vb->bv.bv_len) {
- if (0 != memcmp(va->bv.bv_val, vb->bv.bv_val, va->bv.bv_len)) {
+ if (slapi_attr_value_find(b, slapi_value_get_berval(va)) != 0) {
match = 0;
}
} else {
@@ -2548,24 +2631,55 @@ attr_compare_equal(Slapi_Attr *a, Slapi_Attr *b, int n)
return match;
}
-/* Returns non-zero if all of the values of attribute a are contained in attribute b. */
+/* Returns non-zero if all of the values of attribute a are contained in attribute b.
+ * You can compare only the first n characters of the values by passing in the length
+ * as n. If you want to compare the entire attribute value, set n to 0. */
static int
-attr_compare_present(Slapi_Attr *a, Slapi_Attr *b)
+attr_compare_present(Slapi_Attr *a, Slapi_Attr *b, int n)
{
int match = 1;
int i = 0;
+ int j = 0;
Slapi_Value *va = NULL;
+ Slapi_Value *vb = NULL;
/* Iterate through values in attr a and search for each in attr b */
for (i = slapi_attr_first_value(a, &va); va && (i != -1);
i = slapi_attr_next_value(a, i, &va)) {
- if (slapi_attr_value_find(b, slapi_value_get_berval(va)) != 0) {
- /* This value wasn't found, so stop checking for values */
- match = 0;
- break;
+ if (n == 0) {
+ /* Compare the entire attribute value */
+ if (slapi_attr_value_find(b, slapi_value_get_berval(va)) != 0) {
+ match = 0;
+ goto bail;
+ }
+ } else {
+ /* Only compare up the values up to the specified length. */
+ int found = 0;
+
+ for (j = slapi_attr_first_value(b, &vb); vb && (j != -1);
+ j = slapi_attr_next_value(b, j, &vb)) {
+ /* If either val is less than n, then check if the length, then values are
+ * equal. If both are n or greater, then only compare the first n chars. */
+ if ((va->bv.bv_len < n) || (vb->bv.bv_len < n)) {
+ if (va->bv.bv_len == vb->bv.bv_len) {
+ if (0 == memcmp(va->bv.bv_val, vb->bv.bv_val, va->bv.bv_len)) {
+ found = 1;
+ }
+ }
+ } else if (0 == memcmp(va->bv.bv_val, vb->bv.bv_val, n)) {
+ found = 1;
+ }
+ }
+
+ /* If we didn't find this value from attr a in attr b, we're done. */
+ if (!found) {
+ match = 0;
+ goto bail;
+ }
}
}
+bail:
return match;
}
@@ -3901,23 +4015,22 @@ windows_generate_update_mods(Private_Repl_Protocol *prp,Slapi_Entry *remote_entr
* to_windows case has the create only flag set. We
* just need to check if the value from the AD entry
* is already present in the DS entry. */
- if (0 == slapi_attr_type_cmp(type, "name", SLAPI_TYPE_CMP_SUBTYPE) && !to_windows) {
- values_equal = attr_compare_present(attr, local_attr);
- /* AD has a legth contraint on the initials attribute,
- * so treat is as a special case. */
+ if (!to_windows && (0 == slapi_attr_type_cmp(type, "name", SLAPI_TYPE_CMP_SUBTYPE))) {
+ values_equal = attr_compare_present(attr, local_attr, 0);
+ /* AD has a length contraint on the initials attribute (in addition
+ * to defining it as single-valued), so treat is as a special case. */
} else if (0 == slapi_attr_type_cmp(type, "initials", SLAPI_TYPE_CMP_SUBTYPE)) {
- values_equal = attr_compare_equal(attr, local_attr, AD_INITIALS_LENGTH);
- /* If we're getting a streetAddress (a fake attr name is used) from AD, then
- * we just check if the value in AD is present in our entry in DS. In this
- * case, attr is from the AD entry, and local_attr is from the DS entry. */
- } else if (0 == slapi_attr_type_cmp(type, FAKE_STREET_ATTR_NAME, SLAPI_TYPE_CMP_SUBTYPE) && !to_windows) {
- values_equal = attr_compare_present(attr, local_attr);
- /* If we are checking if we should send a street attribute to AD, then
- * we want to first see if the AD entry already contains any street value
- * that is present in the DS entry. In this case, attr is from the DS
- * entry, and local_attr is from the AD entry. */
- } else if ((0 == slapi_attr_type_cmp(type, "street", SLAPI_TYPE_CMP_SUBTYPE) && to_windows)) {
- values_equal = attr_compare_present(local_attr, attr);
+ values_equal = attr_compare_present(attr, local_attr, AD_INITIALS_LENGTH);
+ /* If this is a single valued type in AD, then we just check if the value
+ * in AD is present in our entry in DS. In this case, attr is from the AD
+ * entry, and local_attr is from the DS entry. */
+ } else if (!to_windows && is_single_valued_attr(type)) {
+ values_equal = attr_compare_present(attr, local_attr, 0);
+ /* If this is a single valued type in AD, then we just check if the AD
+ * entry already contains any value that is present in the DS entry. In
+ * this case, attr is from the DS entry, and local_attr is from the AD entry. */
+ } else if (to_windows && is_single_valued_attr(type)) {
+ values_equal = attr_compare_present(local_attr, attr, 0);
} else {
/* Compare the entire attribute values */
values_equal = attr_compare_equal(attr, local_attr, 0);
@@ -3930,9 +4043,10 @@ windows_generate_update_mods(Private_Repl_Protocol *prp,Slapi_Entry *remote_entr
"windows_generate_update_mods: %s, %s : values are different\n",
slapi_sdn_get_dn(slapi_entry_get_sdn_const(local_entry)), local_type);
- if ((0 == slapi_attr_type_cmp(local_type, "streetAddress",
- SLAPI_TYPE_CMP_SUBTYPE) && to_windows)) {
- /* streetAddress is single-valued in AD, so make
+ if (to_windows && ((0 == slapi_attr_type_cmp(local_type, "streetAddress", SLAPI_TYPE_CMP_SUBTYPE)) ||
+ (0 == slapi_attr_type_cmp(local_type, "telephoneNumber", SLAPI_TYPE_CMP_SUBTYPE)) ||
+ (0 == slapi_attr_type_cmp(local_type, "physicalDeliveryOfficeName", SLAPI_TYPE_CMP_SUBTYPE)))) {
+ /* These attributes are single-valued in AD, so make
* sure we don't try to send more than one value. */
if (slapi_valueset_count(vs) > 1) {
int i = 0;
@@ -4044,10 +4158,9 @@ windows_generate_update_mods(Private_Repl_Protocol *prp,Slapi_Entry *remote_entr
}
} else
{
- if ((0 == slapi_attr_type_cmp(local_type, "streetAddress",
- SLAPI_TYPE_CMP_SUBTYPE) && to_windows)) {
- /* streetAddress is single-valued in AD, so make
- * sure we don't try to send more than one value. */
+ /* If this attribute is single-valued in AD,
+ * we only want to send the first value. */
+ if (to_windows && is_single_valued_attr(local_type)) {
if (slapi_valueset_count(vs) > 1) {
int i = 0;
Slapi_Value *value = NULL;
@@ -4063,8 +4176,10 @@ windows_generate_update_mods(Private_Repl_Protocol *prp,Slapi_Entry *remote_entr
slapi_valueset_add_value_ext(vs, new_value, SLAPI_VALUE_FLAG_PASSIN);
}
}
- } else if ((0 == slapi_attr_type_cmp(local_type, "initials",
- SLAPI_TYPE_CMP_SUBTYPE) && to_windows)) {
+ }
+
+ if (to_windows && (0 == slapi_attr_type_cmp(local_type, "initials",
+ SLAPI_TYPE_CMP_SUBTYPE))) {
/* initials is constratined to a max length of
* 6 characters in AD, so trim the value if
* needed before sending. */
