Hi,
I tried to rebuild kernel from kernel-4.2.0-0.rc3.git3.1.fc23.src.rpm but I got following error.
Applying: lib/cpumask: Make CPUMASK_OFFSTACK usable without debug dependency Applying: amd-xgbe-a0: Add support for XGBE on A0 Applying: amd-xgbe-phy-a0: Add support for XGBE PHY on A0 Applying: arm64: avoid needing console= to enable serial console Applying: usb: make xhci platform driver use 64 bit or 32 bit DMA Applying: arm64: acpi drop expert patch Applying: ARM: tegra: usb no reset error: drivers/usb/core/hub.c: does not exist in index Patch failed at 0007 ARM: tegra: usb no reset The copy of the patch that failed is found in: /home/masami/rpmbuild/BUILD/kernel-4.1.fc23/linux-4.2.0-0.rc3.git3.1.fc23.x86_64/.git/rebase-apply/patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". error: Bad exit status from /var/tmp/rpm-tmp.yWoA78 (%prep)
Failed patch is this.
masami@f23-test:~$ cat rpmbuild/BUILD/kernel-4.1.fc23/linux-4.2.0-0.rc3.git3.1.fc23.x86_64/.git/rebase-apply/patch --- drivers/usb/core/hub.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 43cb2f2e3b43..7f838ec11c81 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4996,6 +4996,13 @@ static void hub_event(struct work_struct *work) (u16) hub->change_bits[0], (u16) hub->event_bits[0]);
+ /* Don't disconnect USB-SATA on TrimSlice */ + if (strcmp(dev_name(hdev->bus->controller), "tegra-ehci.0") == 0) { + if ((hdev->state == 7) && (hub->change_bits[0] == 0) && + (hub->event_bits[0] == 0x2)) + hub->event_bits[0] = 0; + } + /* Lock the device, then check to see if we were * disconnected while waiting for the lock to succeed. */ usb_lock_device(hdev);
any idea?
I did following command to rebuild on fedora 23(x86_64) environment. rpmbuild -bp --target=$(uname -m) kernel.spec
Cheers,
On Sun, Jul 26, 2015 at 9:39 AM, Masami Ichikawa masami256@gmail.com wrote:
Hi,
I tried to rebuild kernel from kernel-4.2.0-0.rc3.git3.1.fc23.src.rpm but I got following error.
Applying: lib/cpumask: Make CPUMASK_OFFSTACK usable without debug dependency Applying: amd-xgbe-a0: Add support for XGBE on A0 Applying: amd-xgbe-phy-a0: Add support for XGBE PHY on A0 Applying: arm64: avoid needing console= to enable serial console Applying: usb: make xhci platform driver use 64 bit or 32 bit DMA Applying: arm64: acpi drop expert patch Applying: ARM: tegra: usb no reset error: drivers/usb/core/hub.c: does not exist in index Patch failed at 0007 ARM: tegra: usb no reset The copy of the patch that failed is found in: /home/masami/rpmbuild/BUILD/kernel-4.1.fc23/linux-4.2.0-0.rc3.git3.1.fc23.x86_64/.git/rebase-apply/patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". error: Bad exit status from /var/tmp/rpm-tmp.yWoA78 (%prep)
Failed patch is this.
masami@f23-test:~$ cat rpmbuild/BUILD/kernel-4.1.fc23/linux-4.2.0-0.rc3.git3.1.fc23.x86_64/.git/rebase-apply/patch
drivers/usb/core/hub.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 43cb2f2e3b43..7f838ec11c81 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4996,6 +4996,13 @@ static void hub_event(struct work_struct *work) (u16) hub->change_bits[0], (u16) hub->event_bits[0]);
/* Don't disconnect USB-SATA on TrimSlice */if (strcmp(dev_name(hdev->bus->controller), "tegra-ehci.0") == 0) {if ((hdev->state == 7) && (hub->change_bits[0] == 0) &&(hub->event_bits[0] == 0x2))hub->event_bits[0] = 0;}/* Lock the device, then check to see if we were * disconnected while waiting for the lock to succeed. */ usb_lock_device(hdev);any idea?
I did following command to rebuild on fedora 23(x86_64) environment. rpmbuild -bp --target=$(uname -m) kernel.spec
We'd likely need to see the whole log. Also, why are you rebuilding something that is already built on koji? Normally that is done if someone makes modifications, so I'm curious if you have done so.
josh
On Sun, Jul 26, 2015 at 11:06 PM, Josh Boyer jwboyer@fedoraproject.org wrote:
On Sun, Jul 26, 2015 at 9:39 AM, Masami Ichikawa masami256@gmail.com wrote:
Hi,
I tried to rebuild kernel from kernel-4.2.0-0.rc3.git3.1.fc23.src.rpm but I got following error.
Applying: lib/cpumask: Make CPUMASK_OFFSTACK usable without debug dependency Applying: amd-xgbe-a0: Add support for XGBE on A0 Applying: amd-xgbe-phy-a0: Add support for XGBE PHY on A0 Applying: arm64: avoid needing console= to enable serial console Applying: usb: make xhci platform driver use 64 bit or 32 bit DMA Applying: arm64: acpi drop expert patch Applying: ARM: tegra: usb no reset error: drivers/usb/core/hub.c: does not exist in index Patch failed at 0007 ARM: tegra: usb no reset The copy of the patch that failed is found in: /home/masami/rpmbuild/BUILD/kernel-4.1.fc23/linux-4.2.0-0.rc3.git3.1.fc23.x86_64/.git/rebase-apply/patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". error: Bad exit status from /var/tmp/rpm-tmp.yWoA78 (%prep)
Failed patch is this.
masami@f23-test:~$ cat rpmbuild/BUILD/kernel-4.1.fc23/linux-4.2.0-0.rc3.git3.1.fc23.x86_64/.git/rebase-apply/patch
drivers/usb/core/hub.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 43cb2f2e3b43..7f838ec11c81 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4996,6 +4996,13 @@ static void hub_event(struct work_struct *work) (u16) hub->change_bits[0], (u16) hub->event_bits[0]);
/* Don't disconnect USB-SATA on TrimSlice */if (strcmp(dev_name(hdev->bus->controller), "tegra-ehci.0") == 0) {if ((hdev->state == 7) && (hub->change_bits[0] == 0) &&(hub->event_bits[0] == 0x2))hub->event_bits[0] = 0;}/* Lock the device, then check to see if we were * disconnected while waiting for the lock to succeed. */ usb_lock_device(hdev);any idea?
I did following command to rebuild on fedora 23(x86_64) environment. rpmbuild -bp --target=$(uname -m) kernel.spec
We'd likely need to see the whole log. Also, why are you rebuilding something that is already built on koji? Normally that is done if someone makes modifications, so I'm curious if you have done so.
I paste whole log in the bottom of this mail. The reason I tried to rebuild is, I wanted to know how fedora kernel is built. Usually, when I modify kernel, I use upstream kernel and did make bzImage, make modules steps. So that is the reason I tried to rebuild.
josh
masami@f23-test:~/rpmbuild/SPECS$ rpmbuild -bp --target=$(uname -m) kernel.spec 2>&1 | tee ~/f23_build.log Building target platforms: x86_64 Building for target x86_64 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.4LpL3H + umask 022 + cd /home/masami/rpmbuild/BUILD + patch_command='patch -p1 -F1 -s' ++ find /home/masami/rpmbuild/BUILD -maxdepth 1 -type d -name 'kernel-4.*' ++ grep -x -v /home/masami/rpmbuild/BUILD/kernel-4.1.fc23 + sharedirs= + : + '[' -d kernel-4.1.fc23 ']' + cd kernel-4.1.fc23 + for i in 'linux-*' + '[' -d linux-4.2.0-0.rc3.git3.1.fc23.x86_64 ']' + rm -rf deleteme.x86_64 + mv linux-4.2.0-0.rc3.git3.1.fc23.x86_64 deleteme-linux-4.2.0-0.rc3.git3.1.fc23.x86_64 + cd .. + '[' '!' -d kernel-4.1.fc23/vanilla-4.2-rc3-git3 ']' + cd kernel-4.1.fc23 + cp -al vanilla-4.2-rc3-git3 linux-4.2.0-0.rc3.git3.1.fc23.x86_64 + rm -rf deleteme-linux-4.2.0-0.rc3.git3.1.fc23.x86_64 + cd linux-4.2.0-0.rc3.git3.1.fc23.x86_64 + cp /home/masami/rpmbuild/SOURCES/config-arm-generic /home/masami/rpmbuild/SOURCES/config-arm64 /home/masami/rpmbuild/SOURCES/config-armv7 /home/masami/rpmbuild/SOURCES/config-armv7-generic /home/masami/rpmbuild/SOURCES/config-armv7-lpae /home/masami/rpmbuild/SOURCES/config-debug /home/masami/rpmbuild/SOURCES/config-generic /home/masami/rpmbuild/SOURCES/config-i686-PAE /home/masami/rpmbuild/SOURCES/config-local /home/masami/rpmbuild/SOURCES/config-no-extra /home/masami/rpmbuild/SOURCES/config-nodebug /home/masami/rpmbuild/SOURCES/config-powerpc64 /home/masami/rpmbuild/SOURCES/config-powerpc64-generic /home/masami/rpmbuild/SOURCES/config-powerpc64le /home/masami/rpmbuild/SOURCES/config-powerpc64p7 /home/masami/rpmbuild/SOURCES/config-s390x /home/masami/rpmbuild/SOURCES/config-x86-32-generic /home/masami/rpmbuild/SOURCES/config-x86-generic /home/masami/rpmbuild/SOURCES/config-x86_64-generic . + cp /home/masami/rpmbuild/SOURCES/merge.pl . + make -f /home/masami/rpmbuild/SOURCES/Makefile.config VERSION=4.2.0 configs perl merge.pl config-x86-32-generic config-x86-generic > temp-x86-32 cat config-generic config-nodebug > temp-generic perl merge.pl temp-x86-32 temp-generic > temp-x86-32-generic perl merge.pl /dev/null temp-x86-32-generic i386 > kernel-4.2.0-i686.config cat config-generic config-debug > temp-debug-generic perl merge.pl temp-x86-32 temp-debug-generic > temp-x86-debug-generic perl merge.pl /dev/null temp-x86-debug-generic i386 > kernel-4.2.0-i686-debug.config perl merge.pl config-i686-PAE temp-x86-32-generic i386 > kernel-4.2.0-i686-PAE.config perl merge.pl config-i686-PAE temp-x86-debug-generic i386 > kernel-4.2.0-i686-PAEdebug.config perl merge.pl config-x86_64-generic config-x86-generic > temp-x86-64 perl merge.pl temp-x86-64 temp-generic > temp-x86_64-generic perl merge.pl /dev/null temp-x86_64-generic x86_64 > kernel-4.2.0-x86_64.config perl merge.pl temp-x86-64 temp-debug-generic > temp-x86_64-debug-generic perl merge.pl /dev/null temp-x86_64-debug-generic x86_64 > kernel-4.2.0-x86_64-debug.config perl merge.pl config-s390x temp-generic > temp-s390-generic perl merge.pl config-s390x temp-s390-generic s390 > kernel-4.2.0-s390x.config perl merge.pl config-no-extra temp-generic > temp-no-extra-generic perl merge.pl config-arm-generic temp-no-extra-generic > temp-arm-generic perl merge.pl config-armv7-generic temp-arm-generic > temp-armv7-generic perl merge.pl config-armv7 temp-armv7-generic > temp-armv7 perl merge.pl /dev/null temp-armv7 arm > kernel-4.2.0-armv7hl.config perl merge.pl config-armv7-lpae temp-armv7-generic > temp-armv7-lpae perl merge.pl /dev/null temp-armv7-lpae arm > kernel-4.2.0-armv7hl-lpae.config perl merge.pl config-arm64 temp-arm-generic > temp-arm64 perl merge.pl /dev/null temp-arm64 arm64 > kernel-4.2.0-aarch64.config perl merge.pl config-powerpc64-generic temp-generic > temp-powerpc64-generic perl merge.pl config-powerpc64 temp-powerpc64-generic powerpc > kernel-4.2.0-ppc64.config perl merge.pl config-powerpc64p7 temp-powerpc64-generic powerpc > kernel-4.2.0-ppc64p7.config perl merge.pl config-powerpc64-generic temp-debug-generic > temp-powerpc64-debug-generic perl merge.pl config-powerpc64 temp-powerpc64-debug-generic powerpc > kernel-4.2.0-ppc64-debug.config perl merge.pl config-powerpc64le temp-powerpc64-generic powerpc > kernel-4.2.0-ppc64le.config perl merge.pl config-powerpc64le temp-powerpc64-debug-generic powerpc
kernel-4.2.0-ppc64le-debug.config
+ for i in 'kernel-4.2.0-x86_64*.config' + mv kernel-4.2.0-x86_64-debug.config kernel-4.2.0-x86_64-debug.config.tmp + ./merge.pl /home/masami/rpmbuild/SOURCES/config-local kernel-4.2.0-x86_64-debug.config.tmp + rm kernel-4.2.0-x86_64-debug.config.tmp + for i in 'kernel-4.2.0-x86_64*.config' + mv kernel-4.2.0-x86_64.config kernel-4.2.0-x86_64.config.tmp + ./merge.pl /home/masami/rpmbuild/SOURCES/config-local kernel-4.2.0-x86_64.config.tmp + rm kernel-4.2.0-x86_64.config.tmp + git am /home/masami/rpmbuild/SOURCES/kbuild-AFTER_LINK.patch Applying: kbuild: AFTER_LINK + git am /home/masami/rpmbuild/SOURCES/lib-cpumask-Make-CPUMASK_OFFSTACK-usable-without-deb.patch /home/masami/rpmbuild/SOURCES/amd-xgbe-a0-Add-support-for-XGBE-on-A0.patch /home/masami/rpmbuild/SOURCES/amd-xgbe-phy-a0-Add-support-for-XGBE-PHY-on-A0.patch /home/masami/rpmbuild/SOURCES/arm64-avoid-needing-console-to-enable-serial-console.patch /home/masami/rpmbuild/SOURCES/usb-make-xhci-platform-driver-use-64-bit-or-32-bit-D.patch /home/masami/rpmbuild/SOURCES/arm64-acpi-drop-expert-patch.patch /home/masami/rpmbuild/SOURCES/ARM-tegra-usb-no-reset.patch /home/masami/rpmbuild/SOURCES/arm-i.MX6-Utilite-device-dtb.patch /home/masami/rpmbuild/SOURCES/Revert-Revert-ACPI-video-change-acpi-video-brightnes.patch /home/masami/rpmbuild/SOURCES/input-kill-stupid-messages.patch /home/masami/rpmbuild/SOURCES/die-floppy-die.patch /home/masami/rpmbuild/SOURCES/no-pcspkr-modalias.patch /home/masami/rpmbuild/SOURCES/input-silence-i8042-noise.patch /home/masami/rpmbuild/SOURCES/silence-fbcon-logo.patch /home/masami/rpmbuild/SOURCES/Kbuild-Add-an-option-to-enable-GCC-VTA.patch /home/masami/rpmbuild/SOURCES/crash-driver.patch /home/masami/rpmbuild/SOURCES/Add-secure_modules-call.patch /home/masami/rpmbuild/SOURCES/PCI-Lock-down-BAR-access-when-module-security-is-ena.patch /home/masami/rpmbuild/SOURCES/x86-Lock-down-IO-port-access-when-module-security-is.patch /home/masami/rpmbuild/SOURCES/ACPI-Limit-access-to-custom_method.patch /home/masami/rpmbuild/SOURCES/asus-wmi-Restrict-debugfs-interface-when-module-load.patch /home/masami/rpmbuild/SOURCES/Restrict-dev-mem-and-dev-kmem-when-module-loading-is.patch /home/masami/rpmbuild/SOURCES/acpi-Ignore-acpi_rsdp-kernel-parameter-when-module-l.patch /home/masami/rpmbuild/SOURCES/kexec-Disable-at-runtime-if-the-kernel-enforces-modu.patch /home/masami/rpmbuild/SOURCES/x86-Restrict-MSR-access-when-module-loading-is-restr.patch /home/masami/rpmbuild/SOURCES/Add-option-to-automatically-enforce-module-signature.patch /home/masami/rpmbuild/SOURCES/efi-Disable-secure-boot-if-shim-is-in-insecure-mode.patch /home/masami/rpmbuild/SOURCES/efi-Make-EFI_SECURE_BOOT_SIG_ENFORCE-depend-on-EFI.patch /home/masami/rpmbuild/SOURCES/efi-Add-EFI_SECURE_BOOT-bit.patch /home/masami/rpmbuild/SOURCES/hibernate-Disable-in-a-signed-modules-environment.patch /home/masami/rpmbuild/SOURCES/Add-EFI-signature-data-types.patch /home/masami/rpmbuild/SOURCES/Add-an-EFI-signature-blob-parser-and-key-loader.patch /home/masami/rpmbuild/SOURCES/KEYS-Add-a-system-blacklist-keyring.patch /home/masami/rpmbuild/SOURCES/MODSIGN-Import-certificates-from-UEFI-Secure-Boot.patch /home/masami/rpmbuild/SOURCES/MODSIGN-Support-not-importing-certs-from-db.patch /home/masami/rpmbuild/SOURCES/Add-sysrq-option-to-disable-secure-boot-mode.patch /home/masami/rpmbuild/SOURCES/drm-i915-hush-check-crtc-state.patch /home/masami/rpmbuild/SOURCES/disable-i8042-check-on-apple-mac.patch /home/masami/rpmbuild/SOURCES/lis3-improve-handling-of-null-rate.patch /home/masami/rpmbuild/SOURCES/watchdog-Disable-watchdog-on-virtual-machines.patch /home/masami/rpmbuild/SOURCES/scsi-sd_revalidate_disk-prevent-NULL-ptr-deref.patch /home/masami/rpmbuild/SOURCES/criu-no-expert.patch /home/masami/rpmbuild/SOURCES/ath9k-rx-dma-stop-check.patch /home/masami/rpmbuild/SOURCES/xen-pciback-Don-t-disable-PCI_COMMAND-on-PCI-device-.patch /home/masami/rpmbuild/SOURCES/Input-synaptics-pin-3-touches-when-the-firmware-repo.patch /home/masami/rpmbuild/SOURCES/firmware-Drop-WARN-from-usermodehelper_read_trylock-.patch /home/masami/rpmbuild/SOURCES/drm-i915-turn-off-wc-mmaps.patch Applying: lib/cpumask: Make CPUMASK_OFFSTACK usable without debug dependency Applying: amd-xgbe-a0: Add support for XGBE on A0 Applying: amd-xgbe-phy-a0: Add support for XGBE PHY on A0 Applying: arm64: avoid needing console= to enable serial console Applying: usb: make xhci platform driver use 64 bit or 32 bit DMA Applying: arm64: acpi drop expert patch Applying: ARM: tegra: usb no reset error: drivers/usb/core/hub.c: does not exist in index Patch failed at 0007 ARM: tegra: usb no reset The copy of the patch that failed is found in: /home/masami/rpmbuild/BUILD/kernel-4.1.fc23/linux-4.2.0-0.rc3.git3.1.fc23.x86_64/.git/rebase-apply/patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". error: Bad exit status from /var/tmp/rpm-tmp.4LpL3H (%prep)
RPM build errors: Bad exit status from /var/tmp/rpm-tmp.4LpL3H (%prep)
Cheers,
On July 26, 2015 9:37:24 AM CDT, Masami Ichikawa masami256@gmail.com wrote:
On Sun, Jul 26, 2015 at 11:06 PM, Josh Boyer jwboyer@fedoraproject.org wrote:
On Sun, Jul 26, 2015 at 9:39 AM, Masami Ichikawa
masami256@gmail.com wrote:
Hi,
I tried to rebuild kernel from
kernel-4.2.0-0.rc3.git3.1.fc23.src.rpm
but I got following error.
Applying: lib/cpumask: Make CPUMASK_OFFSTACK usable without debug
dependency
Applying: amd-xgbe-a0: Add support for XGBE on A0 Applying: amd-xgbe-phy-a0: Add support for XGBE PHY on A0 Applying: arm64: avoid needing console= to enable serial console Applying: usb: make xhci platform driver use 64 bit or 32 bit DMA Applying: arm64: acpi drop expert patch Applying: ARM: tegra: usb no reset error: drivers/usb/core/hub.c: does not exist in index Patch failed at 0007 ARM: tegra: usb no reset The copy of the patch that failed is found in:
/home/masami/rpmbuild/BUILD/kernel-4.1.fc23/linux-4.2.0-0.rc3.git3.1.fc23.x86_64/.git/rebase-apply/patch
When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am
--abort".
error: Bad exit status from /var/tmp/rpm-tmp.yWoA78 (%prep)
Failed patch is this.
masami@f23-test:~$ cat
rpmbuild/BUILD/kernel-4.1.fc23/linux-4.2.0-0.rc3.git3.1.fc23.x86_64/.git/rebase-apply/patch
drivers/usb/core/hub.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 43cb2f2e3b43..7f838ec11c81 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4996,6 +4996,13 @@ static void hub_event(struct work_struct
*work)
(u16) hub->change_bits[0], (u16) hub->event_bits[0]);
/* Don't disconnect USB-SATA on TrimSlice */if (strcmp(dev_name(hdev->bus->controller), "tegra-ehci.0")== 0) {
if ((hdev->state == 7) && (hub->change_bits[0] == 0)&&
(hub->event_bits[0] == 0x2))hub->event_bits[0] = 0;}/* Lock the device, then check to see if we were * disconnected while waiting for the lock to succeed. */ usb_lock_device(hdev);any idea?
I did following command to rebuild on fedora 23(x86_64) environment. rpmbuild -bp --target=$(uname -m) kernel.spec
We'd likely need to see the whole log. Also, why are you rebuilding something that is already built on koji? Normally that is done if someone makes modifications, so I'm curious if you have done so.
I paste whole log in the bottom of this mail. The reason I tried to rebuild is, I wanted to know how fedora kernel is built. Usually, when I modify kernel, I use upstream kernel and did make bzImage, make modules steps. So that is the reason I tried to rebuild.
josh
masami@f23-test:~/rpmbuild/SPECS$ rpmbuild -bp --target=$(uname -m) kernel.spec 2>&1 | tee ~/f23_build.log Building target platforms: x86_64 Building for target x86_64 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.4LpL3H
- umask 022
- cd /home/masami/rpmbuild/BUILD
- patch_command='patch -p1 -F1 -s'
++ find /home/masami/rpmbuild/BUILD -maxdepth 1 -type d -name 'kernel-4.*' ++ grep -x -v /home/masami/rpmbuild/BUILD/kernel-4.1.fc23
- sharedirs=
- :
- '[' -d kernel-4.1.fc23 ']'
- cd kernel-4.1.fc23
- for i in 'linux-*'
- '[' -d linux-4.2.0-0.rc3.git3.1.fc23.x86_64 ']'
- rm -rf deleteme.x86_64
- mv linux-4.2.0-0.rc3.git3.1.fc23.x86_64
deleteme-linux-4.2.0-0.rc3.git3.1.fc23.x86_64
- cd ..
- '[' '!' -d kernel-4.1.fc23/vanilla-4.2-rc3-git3 ']'
- cd kernel-4.1.fc23
- cp -al vanilla-4.2-rc3-git3 linux-4.2.0-0.rc3.git3.1.fc23.x86_64
- rm -rf deleteme-linux-4.2.0-0.rc3.git3.1.fc23.x86_64
- cd linux-4.2.0-0.rc3.git3.1.fc23.x86_64
- cp /home/masami/rpmbuild/SOURCES/config-arm-generic
/home/masami/rpmbuild/SOURCES/config-arm64 /home/masami/rpmbuild/SOURCES/config-armv7 /home/masami/rpmbuild/SOURCES/config-armv7-generic /home/masami/rpmbuild/SOURCES/config-armv7-lpae /home/masami/rpmbuild/SOURCES/config-debug /home/masami/rpmbuild/SOURCES/config-generic /home/masami/rpmbuild/SOURCES/config-i686-PAE /home/masami/rpmbuild/SOURCES/config-local /home/masami/rpmbuild/SOURCES/config-no-extra /home/masami/rpmbuild/SOURCES/config-nodebug /home/masami/rpmbuild/SOURCES/config-powerpc64 /home/masami/rpmbuild/SOURCES/config-powerpc64-generic /home/masami/rpmbuild/SOURCES/config-powerpc64le /home/masami/rpmbuild/SOURCES/config-powerpc64p7 /home/masami/rpmbuild/SOURCES/config-s390x /home/masami/rpmbuild/SOURCES/config-x86-32-generic /home/masami/rpmbuild/SOURCES/config-x86-generic /home/masami/rpmbuild/SOURCES/config-x86_64-generic .
- cp /home/masami/rpmbuild/SOURCES/merge.pl .
- make -f /home/masami/rpmbuild/SOURCES/Makefile.config VERSION=4.2.0
configs perl merge.pl config-x86-32-generic config-x86-generic > temp-x86-32 cat config-generic config-nodebug > temp-generic perl merge.pl temp-x86-32 temp-generic > temp-x86-32-generic perl merge.pl /dev/null temp-x86-32-generic i386 > kernel-4.2.0-i686.config cat config-generic config-debug > temp-debug-generic perl merge.pl temp-x86-32 temp-debug-generic > temp-x86-debug-generic perl merge.pl /dev/null temp-x86-debug-generic i386 > kernel-4.2.0-i686-debug.config perl merge.pl config-i686-PAE temp-x86-32-generic i386 > kernel-4.2.0-i686-PAE.config perl merge.pl config-i686-PAE temp-x86-debug-generic i386 > kernel-4.2.0-i686-PAEdebug.config perl merge.pl config-x86_64-generic config-x86-generic > temp-x86-64 perl merge.pl temp-x86-64 temp-generic > temp-x86_64-generic perl merge.pl /dev/null temp-x86_64-generic x86_64 > kernel-4.2.0-x86_64.config perl merge.pl temp-x86-64 temp-debug-generic > temp-x86_64-debug-generic perl merge.pl /dev/null temp-x86_64-debug-generic x86_64 > kernel-4.2.0-x86_64-debug.config perl merge.pl config-s390x temp-generic > temp-s390-generic perl merge.pl config-s390x temp-s390-generic s390 > kernel-4.2.0-s390x.config perl merge.pl config-no-extra temp-generic > temp-no-extra-generic perl merge.pl config-arm-generic temp-no-extra-generic > temp-arm-generic perl merge.pl config-armv7-generic temp-arm-generic > temp-armv7-generic perl merge.pl config-armv7 temp-armv7-generic > temp-armv7 perl merge.pl /dev/null temp-armv7 arm > kernel-4.2.0-armv7hl.config perl merge.pl config-armv7-lpae temp-armv7-generic > temp-armv7-lpae perl merge.pl /dev/null temp-armv7-lpae arm > kernel-4.2.0-armv7hl-lpae.config perl merge.pl config-arm64 temp-arm-generic > temp-arm64 perl merge.pl /dev/null temp-arm64 arm64 > kernel-4.2.0-aarch64.config perl merge.pl config-powerpc64-generic temp-generic > temp-powerpc64-generic perl merge.pl config-powerpc64 temp-powerpc64-generic powerpc > kernel-4.2.0-ppc64.config perl merge.pl config-powerpc64p7 temp-powerpc64-generic powerpc > kernel-4.2.0-ppc64p7.config perl merge.pl config-powerpc64-generic temp-debug-generic > temp-powerpc64-debug-generic perl merge.pl config-powerpc64 temp-powerpc64-debug-generic powerpc > kernel-4.2.0-ppc64-debug.config perl merge.pl config-powerpc64le temp-powerpc64-generic powerpc > kernel-4.2.0-ppc64le.config perl merge.pl config-powerpc64le temp-powerpc64-debug-generic powerpc
kernel-4.2.0-ppc64le-debug.config
- for i in 'kernel-4.2.0-x86_64*.config'
- mv kernel-4.2.0-x86_64-debug.config
kernel-4.2.0-x86_64-debug.config.tmp
- ./merge.pl /home/masami/rpmbuild/SOURCES/config-local
kernel-4.2.0-x86_64-debug.config.tmp
- rm kernel-4.2.0-x86_64-debug.config.tmp
- for i in 'kernel-4.2.0-x86_64*.config'
- mv kernel-4.2.0-x86_64.config kernel-4.2.0-x86_64.config.tmp
- ./merge.pl /home/masami/rpmbuild/SOURCES/config-local
kernel-4.2.0-x86_64.config.tmp
- rm kernel-4.2.0-x86_64.config.tmp
- git am /home/masami/rpmbuild/SOURCES/kbuild-AFTER_LINK.patch
Applying: kbuild: AFTER_LINK
- git am
/home/masami/rpmbuild/SOURCES/lib-cpumask-Make-CPUMASK_OFFSTACK-usable-without-deb.patch /home/masami/rpmbuild/SOURCES/amd-xgbe-a0-Add-support-for-XGBE-on-A0.patch /home/masami/rpmbuild/SOURCES/amd-xgbe-phy-a0-Add-support-for-XGBE-PHY-on-A0.patch /home/masami/rpmbuild/SOURCES/arm64-avoid-needing-console-to-enable-serial-console.patch /home/masami/rpmbuild/SOURCES/usb-make-xhci-platform-driver-use-64-bit-or-32-bit-D.patch /home/masami/rpmbuild/SOURCES/arm64-acpi-drop-expert-patch.patch /home/masami/rpmbuild/SOURCES/ARM-tegra-usb-no-reset.patch /home/masami/rpmbuild/SOURCES/arm-i.MX6-Utilite-device-dtb.patch /home/masami/rpmbuild/SOURCES/Revert-Revert-ACPI-video-change-acpi-video-brightnes.patch /home/masami/rpmbuild/SOURCES/input-kill-stupid-messages.patch /home/masami/rpmbuild/SOURCES/die-floppy-die.patch /home/masami/rpmbuild/SOURCES/no-pcspkr-modalias.patch /home/masami/rpmbuild/SOURCES/input-silence-i8042-noise.patch /home/masami/rpmbuild/SOURCES/silence-fbcon-logo.patch /home/masami/rpmbuild/SOURCES/Kbuild-Add-an-option-to-enable-GCC-VTA.patch /home/masami/rpmbuild/SOURCES/crash-driver.patch /home/masami/rpmbuild/SOURCES/Add-secure_modules-call.patch /home/masami/rpmbuild/SOURCES/PCI-Lock-down-BAR-access-when-module-security-is-ena.patch /home/masami/rpmbuild/SOURCES/x86-Lock-down-IO-port-access-when-module-security-is.patch /home/masami/rpmbuild/SOURCES/ACPI-Limit-access-to-custom_method.patch /home/masami/rpmbuild/SOURCES/asus-wmi-Restrict-debugfs-interface-when-module-load.patch /home/masami/rpmbuild/SOURCES/Restrict-dev-mem-and-dev-kmem-when-module-loading-is.patch /home/masami/rpmbuild/SOURCES/acpi-Ignore-acpi_rsdp-kernel-parameter-when-module-l.patch /home/masami/rpmbuild/SOURCES/kexec-Disable-at-runtime-if-the-kernel-enforces-modu.patch /home/masami/rpmbuild/SOURCES/x86-Restrict-MSR-access-when-module-loading-is-restr.patch /home/masami/rpmbuild/SOURCES/Add-option-to-automatically-enforce-module-signature.patch /home/masami/rpmbuild/SOURCES/efi-Disable-secure-boot-if-shim-is-in-insecure-mode.patch /home/masami/rpmbuild/SOURCES/efi-Make-EFI_SECURE_BOOT_SIG_ENFORCE-depend-on-EFI.patch /home/masami/rpmbuild/SOURCES/efi-Add-EFI_SECURE_BOOT-bit.patch /home/masami/rpmbuild/SOURCES/hibernate-Disable-in-a-signed-modules-environment.patch /home/masami/rpmbuild/SOURCES/Add-EFI-signature-data-types.patch /home/masami/rpmbuild/SOURCES/Add-an-EFI-signature-blob-parser-and-key-loader.patch /home/masami/rpmbuild/SOURCES/KEYS-Add-a-system-blacklist-keyring.patch /home/masami/rpmbuild/SOURCES/MODSIGN-Import-certificates-from-UEFI-Secure-Boot.patch /home/masami/rpmbuild/SOURCES/MODSIGN-Support-not-importing-certs-from-db.patch /home/masami/rpmbuild/SOURCES/Add-sysrq-option-to-disable-secure-boot-mode.patch /home/masami/rpmbuild/SOURCES/drm-i915-hush-check-crtc-state.patch /home/masami/rpmbuild/SOURCES/disable-i8042-check-on-apple-mac.patch /home/masami/rpmbuild/SOURCES/lis3-improve-handling-of-null-rate.patch /home/masami/rpmbuild/SOURCES/watchdog-Disable-watchdog-on-virtual-machines.patch /home/masami/rpmbuild/SOURCES/scsi-sd_revalidate_disk-prevent-NULL-ptr-deref.patch /home/masami/rpmbuild/SOURCES/criu-no-expert.patch /home/masami/rpmbuild/SOURCES/ath9k-rx-dma-stop-check.patch /home/masami/rpmbuild/SOURCES/xen-pciback-Don-t-disable-PCI_COMMAND-on-PCI-device-.patch /home/masami/rpmbuild/SOURCES/Input-synaptics-pin-3-touches-when-the-firmware-repo.patch /home/masami/rpmbuild/SOURCES/firmware-Drop-WARN-from-usermodehelper_read_trylock-.patch /home/masami/rpmbuild/SOURCES/drm-i915-turn-off-wc-mmaps.patch Applying: lib/cpumask: Make CPUMASK_OFFSTACK usable without debug dependency Applying: amd-xgbe-a0: Add support for XGBE on A0 Applying: amd-xgbe-phy-a0: Add support for XGBE PHY on A0 Applying: arm64: avoid needing console= to enable serial console Applying: usb: make xhci platform driver use 64 bit or 32 bit DMA Applying: arm64: acpi drop expert patch Applying: ARM: tegra: usb no reset error: drivers/usb/core/hub.c: does not exist in index Patch failed at 0007 ARM: tegra: usb no reset The copy of the patch that failed is found in: /home/masami/rpmbuild/BUILD/kernel-4.1.fc23/linux-4.2.0-0.rc3.git3.1.fc23.x86_64/.git/rebase-apply/patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". error: Bad exit status from /var/tmp/rpm-tmp.4LpL3H (%prep)
RPM build errors: Bad exit status from /var/tmp/rpm-tmp.4LpL3H (%prep)
Cheers,
Masami Ichikawa
- masami256@gmail.com
- masami@fedoraproject.org
Sorry for unrelated again but like Masami I don't use much of Fedora kernels. I usually use, as provided by the Fedora project, use the vanilla kernel repository for my kernels. I get much more stability from this.
Lance
kernel mailing list kernel@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/kernel
kernel@lists.fedoraproject.org
-
Josh Boyer -
Lance Lassetter -
Masami Ichikawa