suds October 2009

suds@lists.fedoraproject.org

17 participants
26 discussions

Persistent connections - anyone else interested / suggest howto / working on it?
by Rod Montgomery 06 Nov '09

06 Nov '09

Currently (i.e. r580 / 0.3.7 release candidate) Suds uses urllib2, which uses urllib, both from the standard Python library. For Python 2.5.2, urllib2 adds a "Connection: close" header, with the following comment: # We want to make an HTTP/1.1 request, but the addinfourl # class isn't prepared to deal with a persistent connection. # It will try to read all remaining data from the socket, # which will block while the server waits for the next request. # So make sure the connection gets closed after the (only) # request. (lines 1069-1074 of /usr/lib/python2.5/urllib2.py). I'm interested in making Suds able to use persistent connections. Twisted (twistedmatrix.com) seems to have an elaborate HTTP/1.1 Client module in development, that threatens to support persistent connections, but I have been unable to figure out how stable it is, and I don't understand how hard it would be to make Suds able to use it. http://twistedmatrix.com/trac/wiki/TwistedWebClient http://twistedmatrix.com/trac/ticket/3420 which leads to http://twistedmatrix.com/trac/ticket/886 Another possibility is httplib2: http://pypi.python.org/pypi/httplib2/python3-0.5.0 Neither project seems to have much recent development-mailing-list activity, though neither seems completely dead either. The Right Thing To Do would be to make Suds' use of any external HTTP package optional, rather than mandatory, to avoid putting Suds at the mercy of the stability of that external package. Anyone else interested in having persistent connections in Suds? Anyone else have other suggestions for how to go about getting them? Anyone else actually working on this? (I don't see any open Suds-Trac tickets for it.) Thanks!

5 7

Clone "needs" messages
by Daniel Rodriguez 30 Oct '09

30 Oct '09

Hi, I checked in the source code of 0.3.7 and in the subversion trunk and both lack the "cloning" of the "messages" attribute. Trying to usethe "cloned" object fails because it has no "messages". Opening a ticket was my preferred way but it seems that the Fedora Account System is not working properly, so there it goes Original Code at the end of the Client.clone function clone.sd = self.sd return clone New Code clone.sd = self.sd clone.messages = dict(tx=None, rx=None) return clone With that small modification, clone is (so far in my small attempts) working for me. Best regards Daniel

2 1

Cache behavior
by Matt C 29 Oct '09

29 Oct '09

I know that there's some work planned on the cache implementation but I wanted to get this behavior out for the benefit of any tickets that may open (by the way I'm happy to open one on this but I'm not sure I know how). I frequently run into this when instantiating a client (even with cache = None in the constructor): SAXParseException: <unknown>:10:2: mismatched tag, which indicates the cache issue that has come up before on the list. But, if I run the same command from the same interactive session, I create my client object without any issues. In other words, if I run c = Client(url, cache = None, doctor = doctor) and I get my mismatched tag error, I simply run this command again for the second time and I've got a working client. I've not had a chance to look at the caching code yet so I don't have any input to share beyond this. If I get the chance to poke at this a bit more I'll update here. -Matt

2 1

Problems using the attached WSDL's
by Nick Wiesmueller 27 Oct '09

27 Oct '09

Hi, I'm trying to use the attached WSDL's and I'm having some difficulties. I've got this working in C# .NET but I think I don't understand how suds works. I can create my client >>> from suds import * >>> from suds.client import Client >>> client = Client("http://10.1.10.11:81/flex/rpc/zephyrrpcservice?wsdl") My client looks like this. >>> print client Suds ( https://fedorahosted.org/suds/ ) version: 0.3.7 GA build: R580-20091016 Service ( zephyrrpcservice ) tns="http://impl.rpc.thed.com/" Prefixes (1) ns0 = "http://rpc.thed.com/" Ports (1): (ZephyrRPCServicesImplPort) Methods (1): updateTestStatus(ns0:remoteTestResult testResult, ) Types (4): ns0:exception ns0:remoteTestResult ns0:updateTestStatus ns0:updateTestStatusResponse With other WSDL's I was just able to access the methods at this point like this >>>client.someMethod() This doesn't work with the attached WSDL's. It looks like client.service.updateTestStatus(remoteTestResult testResult) might work (I could be totally wrong), but I don't know how to properly create a remoteTestResult object. Thanks for your help, Nick Wiesmueller QA Analyst Singlewire Software PO Box 46218 Madison, WI 53744-6218 Phone Direct - 608.298.1625 www.singlewire.com

2 1

How to force NULL, xsi:nil, gsoap?
by Elyrwen Dynesh 27 Oct '09

27 Oct '09

Hello, I ve just started using suds for accessing a webservice written with gsoap. I have a problem with passing NULL arguments. When I call a remote method which has a pointer argument and I dont not want to specify this argument, suds nevertheless includes this argument in SOAP message with an empty contents, like this: <filter xsi:type="ns0:ReportFilter"/> On the other hand, gsoap recognizes this as a non-empty argument and by no means filter == NULL Generally, gsoap treats an argument as NULL only if: <filter xsi:nil="1"> or <filter ...> is not present in a SOAP message at all. My question is how to force suds to send <filter xsi:nil="1"> or not at all while using methods with pointers? I use the following method calls: client.service.someMethod(filter = None) client.service.someMethod() The method declaration in C++ is: void someMethod(someType* filter = NULL) { if (filter == NULL) { //filter is never NULL } } I've already checked, that when sending the same message suds generates while calling client.service.someMethod(), but with <filter xsi:type="ns0:ReportFilter"/> cut out, everything works fine and filter == NULL Anyone has a clue?

2 1

TransportError needs a docstring, maybe a change in behavior
by Rod Montgomery 25 Oct '09

25 Oct '09

In file transport/__init__.py maybe change the class def to this? class TransportError(Exception): def __init__(self, reason, httpcode, fp=None): """ A transport exception @param reason: Human-readable text message @type reason: str @param httpcode: 3-decimal-digit HTTP status code (RFC 2616) @type httpcode: str @param fp: either a file-like object, containing (?what?), or None @type fp: stream """ Exception.__init__(self, reason) self.httpcode = httpcode self.fp = fp I have not yet figured out exactly *what* is in the fp element, when it is not None. Anybody know offhand? The Python Library Reference, section 2.3, says Exception is derived from BaseException and that raising BaseException with a single argument -- as here -- makes that argument available both as the str() and unicode() values of the exception and as the message attribute of the exception. "All arguments are also stored in args as a tuple, but it will eventually be deprecated and thus its use is discouraged." In Suds as it now stands, the only places that raise TransportError are in the open and send methods of the HttpTransport class, in file transport/http.py. Both cases are in except u2.HTTPError clauses, where u2 is bound to urllib2 from the stdlib: For open: except u2.HTTPError, e: raise TransportError(str(e), e.code, e.fp) For send: except u2.HTTPError, e: if e.code in (202,204): result = None else: raise TransportError(e.msg, e.code, e.fp) Why does open use str(e) where send uses e.msg ? From the source code for HTTPError, it looks to me like e.msg and str(e) differ, in a way that would make it harder than necessary to write a single handler for both versions of the exception. Am I missing something? Is there a good reason for the difference? I was tempted to open a ticket for this, but (a) the proposed changes seemed too trivial and (b) I thought I'd have a better chance of getting my questions answered if I posted to the List instead. I'm digging deeper into exactly how HTTPError works in urllib2 so I'll be able to make TransportError work as uniformly as possible across the Suds-provided Transport and alternatives based on httplib2 and urllib3. It might help my understanding, if I could look at a few cases that actually use TransportError non-trivially. Anyone have any to share?

1 0

HTTPS Client Authentication: Where do I get the key?
by Jacob Fenwick 21 Oct '09

21 Oct '09

Hello all, I'm new to suds. I've managed to get the public.py example working, which is great. However, I'd like to get suds working over HTTPS. My issue partially lies with my minimal understanding of exactly how trusting X.509 certificates work. I know that in Java I can take a .cer certificate issued by an authority, add it to my keystore, and then I'm able to connect over HTTPS to make a SOAP call. In David Norton's post at http://www.threepillarsoftware.com/soap_client_auth on how to use HTTPS with suds, you need a certificate, but you also need a key. I'm not quite sure what this key is. Is this the public key of the endpoint I'm trying to connect to? It surely can't be their private key. Or is this meant to be my public key? Or my private key? If this is the public key from the endpoint, then is there a way to generate this key from the .cer file? Or if this is the public or private key of the client, then is there a way to generate the user's public or private key? On a related newbie SSL question, does each individual computer have its own unique public/private key used for all SOAP endpoints? Or does a user generate a new public/private key combination each time they want to talk to a different SOAP endpoint (or any SSL endpoint for that matter)? I've also tried reading the httplib documentation at http://docs.python.org/library/httplib.html and I still haven't figured this out. Also, I'm curious if Michal Kochel's patch will be added to the system https://fedorahosted.org/suds/ticket/227 . I've also tried this patch but I've run into the same issues. If anyone can shed some light on this problem I would be greatly appreciative. Thanks, Jacob

1 0

Documentation links to Transport throw 404-NotFound
by Rod Montgomery 21 Oct '09

21 Oct '09

Under https://fedorahosted.org/suds/wiki/Documentation#OPTIONS the following links throw 404-NotFound: Label: transport options Target: http://jortel.fedorapeople.org/suds/doc/suds.options.transport.Options-clas… Label: The Transport constructor(s) Target: http://jortel.fedorapeople.org/suds/doc/suds.options.transport.Transport-cl… Seemed excessive to open a ticket for this sort of thing.

1 0

0.3.7 ServiceDefinition changes
by Matt C 21 Oct '09

21 Oct '09

In 0.3.6 I was able to peek at the (very useful!) attributes inside of my client object, in particular c.sd.params, where I could iterate over them and fetch each param.name attribute. It appears this has changed in 0.3.7. I've not had a chance to look into the code for 0.3.7 yet, but was wondering if anyone knew of a way for me to quickly recreate the c.sd.params list that I was able to see in 0.3.6? Thanks in advance, -Matt

2 2

Stale suds cache causing wsdl parser errors
by Drew Bryant 21 Oct '09

21 Oct '09

Hello, The protein data bank webservice that I commonly use updated their wsdl recently, and when attempting to construct a suds.client.Client(url) object for the service I was continually getting the following error: ERROR: An unexpected error occurred while tokenizing input The following traceback may be corrupted or invalid The error message is: ('EOF in multi-line statement', (129, 0)) followed by a large traceback that ultimately failed in the xml.sax.expatreader module as shown below: SAXParseException: /var/folders/aS/aScvrYapHoCwNJHk1sw9LE+++TI/-Tmp-/suds/suds-649682136.http:10:2: mismatched tag I was getting a similar error with several other web services that had recently modified their wsdls so I removed all of the files in the suds tmp folder: /var/folders/aS/aScvrYapHoCwNJHk1sw9LE+++TI/-Tmp-/suds (this is the path selected by suds on my mac running OS X 10.5.8) After removing these tmp files, everything worked fine and I was able to construct the suds.client.Client instances without issues. This is the version of suds that I'm using (via macports): ==================================== py25-suds @0.3.6 (python, devel, net) Description: Suds is a lightweight SOAP python client for consuming Web Services. Homepage: https://fedorahosted.org/suds/ Build Dependencies: py25-setuptools Library Dependencies: python25 Platforms: darwin License: unknown Maintainers: mmoll(a)macports.org, openmaintainer(a)macports.org ==================================== one of the SOAP services I was accessing: http://www.rcsb.org/pdb/services/pdbws?wsdl Basically, I resolved my problem already, but I was wondering why suds was using stale information in its tmp directory instead of building the Clients from scratch. Is this an error with suds not removing stale cache files? I can easily clear this directory every time I want to construct a new Client to guarantee that I won't run into this issue again, but is this a good idea? Thanks, Drew

3 4

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

suds October 2009