test June 2004

test@lists.fedoraproject.org

147 participants
133 discussions

gcc for kernel different than current gcc
by Patrice Dumas 18 Jun '04

18 Jun '04

Hi, Currently in rawhide the gcc is gcc-3.4 while the kernel (kernel-2.6.6-1.435) was compiled with gcc-3.3. As a consequnce, when I try to insmod a module I build myself (ADSL modem), I get in dmesg: eagle_usb: version magic '2.6.6-1.435 686 REGPARM 4KSTACKS gcc-3.4' should be '2.6.6-1.435 686 REGPARM 4KSTACKS gcc-3.3' and a insmod -v leads to 'Invalid module format'. It maybe a good think to provide (keep) 'automatically' a compatible gcc, just like how different kernels may coexist (I use yum). Or there could be another solution... Of course this is not a serious issue as it should disappear soon (and it seems to be in compat-gcc). Pat

4 4

Netgear MA111 problem
by Paul F. Johnson 17 Jun '04

17 Jun '04

Hi, I'm following the instructions for getting the Netgear MA111 from http://www.linuxquestions.org/questions/history/89893. I am up to the part where I have to enter the path to the kernel source. When I enter /usr/src/linux-2.6.6-1.435, the config script fails complaining that while the kernel sources are where I say they are, they are incomplete and advising me obtain the sources from the likes of kernel.org Is there anything missing from the current source tree or am I safe to download the 2.6.7 tree from kernel org and point the script to that? TTFN Paul -- "If I face my God tomorrow, I can tell Him I am innocent. I've never harmed anyone. I have cheated no one. I have deceived no one. I have hurt no one. Except myself. And that He will forgive me." - Hans Holzel

4 10

FC2 X86 Installation Failing
by Janina Sajka 17 Jun '04

17 Jun '04

My efforts to install the released FC2 for X86_64 on a dual Opteron system with a Tyan K8S Pro 2882 board are failing. I'm using a SATA drive connected via the on board SIL 3114 controller. It's the only hd on that controller. My first two attempts aborted during disk formatting. The third and fourth tries got much further--about 20% into the package installation process (with "Everything" selected). Since I'm using someone else's eyes for the installation, it's a little hard to explain exactly what is on tty3 by way of error messages. Suffice it to say that the install is mounting and using e2fsprog for images of /, /usr, etc. Then all stops. I can try to get a better error report transcribed, if that would be helpful. But, my main goal is to just get the 64-bit FC2 up and running so that I can compile a kernel that will provide me my eyes-free interface. Remaining resolutions can certainly follow later--this is the first, all important objective. So, should I give up on the SIL 3114? Should I find an IDE drive for the moment? Or, is there some way to install from the Development tree? All advice greatly appreciated. PS: If telnet installs weren't broken, I could do an X86 install (almost) without assistance--but they still are, though we've found the fix and will be reporting it in soon.

3 2

Kernel 2.4.22-1.2194.nptl needs testing.
by Dave Jones 17 Jun '04

17 Jun '04

In absentia of the changelog for the previous FC1 update kernel to hit testing, here's a double helping. 2194 should appear in updates-testing in a while[*], and as long as there's no screams along the lines of "It doesn't boot", it'll get moved to final updates sometime tomorrow. Dave [*] Announcement sent before mirrors have it, please be patient instead of sending "I don't see it" mails to the list. * Thu Jun 17 2004 Dave Jones <davej(a)redhat.com> - Drop bogus fix for FBIOGETCMAP ioctl which was unneeded. - Numerous userspace pointer reference bugs found with the sparse tool by Al Viro (CAN-2004-0495) * Mon Jun 14 2004 Dave Jones <davej(a)redhat.com> - Fix FPU exception handling local DoS - Fix memory leak to userspace in e1000 driver. (CAN-2004-0535) - Fix incorrect permissions on /proc/scsi/qla2300/HbaApiNode - Fix potential memory access to free memory in /proc handling * Wed May 12 2004 Dave Jones <davej(a)redhat.com> - Build the SMP 586 kernel again (#111871)

1 0

Fedora Core 2 Test Update: sysstat-5_0_1-4
by Alan Cox 17 Jun '04

17 Jun '04

--------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2004-186 2004-06-17 --------------------------------------------------------------------- Name : sysstat Version : 5_0_1 Release : 4 Summary : The sar and iostat system monitoring commands. Description : This package provides the sar and iostat commands for Linux. Sar and iostat enable system monitoring of disk, network, and other IO activity. --------------------------------------------------------------------- Update Information: The startup script would spew an accounting record to the console on boot. The parsing code contained a (harmless) buffer overrun. The interrupt parsing code could not properly understand 2.6 interrupt information, although it happened to normally work. Sysstat was in /usr but ran before NFS mounts. Bugzilla entries fixed with this update: #117182, #124035

1 0

any chance for a "testing" samba 3.0.4 for FC2?
by Dexter Ang 16 Jun '04

16 Jun '04

As the subject says, any chance for at least a "testing" release of samba 3.0.4 for FC2? Or are we waiting for samba 3.0.5? FC1 already had 3.0.4 update released recently. Thanks. dex

2 2

Missing security / bugfix advisories for FC1 / FC2
by Bernd Bartmann 16 Jun '04

16 Jun '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Again there are still some security / bugfix advisories missing: FC1 - - gaim-0.77.2.FC1 (already obsoleted by gaim-0.78-1.FC2) - - recode-3.6-12.0 - - rsync-2.5.7-5.fc1 FC2 - - nfs-utils-1.0.6-22 - - cdrtools-2.01-0.a27.4 - - xinitrc-3.41-1 - - gnome-session-2.6.0-4 - - ethereal-0.10.3-2.2 Best regards. - -- Dipl.-Ing. (FH) Bernd Bartmann <Bernd.Bartmann(a)sohanet.de> I.S. Security and Network Engineer SoHaNet Technology GmbH / Kaiserin-Augusta-Allee 10-11 / 10553 Berlin Fon: +49 30 214783-44 / Fax: +49 30 214783-46 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFA0DZkkQuIaHu84cIRAqTbAKClymiXKSsYLxOZZEeYTHUWvnJqNwCfXAqW SY5yBLlE4PulISMwvcDMo/k= =Q2S7 -----END PGP SIGNATURE-----

3 3

cyrus-imap
by seth doty 16 Jun '04

16 Jun '04

After upgrading from FC1 to FC2 test 3 i realized that FC2 uses cyrus-imap and not the standard IMAP package that FC1 used and that it doesn't use PAM by default because I can no longer login through IMAP. The server is running fine because I can telnet to it but when atempting to login I get a authentication error. I have looked around at cyrus documentation of the cyrus site and redhat's site but the admin tools (mkimap, cm.user, etc) do not work. I even tried changing the .conf file to pam authentication by changing the method to sasl_passwd_check: pam and I tried shadow. any help getting users back in any way would be appreciated, thanks _____________________________________________________________ An ye harm none, do as ye will! Get your FREE E-Mail account today! http://mail.americanwicca.com

15 39

missing libintl.so.3 - httpd can't load php module
by G.Wolfe Woodbury 15 Jun '04

15 Jun '04

Due to a missing libintl.so.3 httpd fails to startup because the php module wants libintl. who dropped the ball? Running a development/rawhide install as of 2004/6/12 gettext and gettext-devel are installed. -- G.Wolfe Woodbury `- -' U The Line Eater is a boojum!

2 1

new dovecot for FC2 - solves segfault crash
by John Dennis 15 Jun '04

15 Jun '04

Subject: Fedora Core 2 Test Update: dovecot-0.99.10.5-1 --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2004-180 2004-06-15 --------------------------------------------------------------------- Product : Fedora Core 2 Name : dovecot Version : 0.99.10.5 Release : 1 Summary : Dovecot Secure imap server Description : Dovecot is an IMAP server for Linux/UNIX-like systems, written with security primarily in mind. It also contains a small POP3 server. It supports mail in either of maildir or mbox formats. --------------------------------------------------------------------- Update Information: Fixes a problem in dovecot where it would segfault (crash) when accessing maildir mbox. Problem described in: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=123022 --------------------------------------------------------------------- --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/2/ 0b0768af264ca65b0c1775e9667be268 SRPMS/dovecot-0.99.10.5-1.src.rpm 5c0c5288680a991bb4dd079894f9bcd7 i386/dovecot-0.99.10.5-1.i386.rpm 019419a881ec27ff87361e48a94cd1ef i386/debug/dovecot-debuginfo-0.99.10.5-1.i386.rpm e979247d7e482b6aa9ffcedc93c0c4c2 x86_64/dovecot-0.99.10.5-1.x86_64.rpm 0731a7cdff2718ff103d8911041023d7 x86_64/debug/dovecot-debuginfo-0.99.10.5-1.x86_64.rpm This update can also be installed with the Update Agent; you can launch the Update Agent with the 'up2date' command. You may need to edit your up2date channels configuration. Within /etc/sysconfig/rhn/sources enable the following line: yum updates-testing http://fedora.redhat.com/updates/testing/fedora-core-2 --------------------------------------------------------------------- -- John Dennis <jdennis(a)redhat.com>

1 0

← Newer
1
2
3
4
5
6
7
8
9
...
14
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

test June 2004