users November 2020

users@lists.fedoraproject.org

128 participants
145 discussions

Re: (fedora) Re: second ethernet device not "seen"
by Jouk Jansen 08 Nov '20

08 Nov '20

Roger Heflin wrote on 7-NOV-2020 22:53:48.78 >try ifconfig -a , ifconfig only shows interfaces that are "up", >ifconfig XXX up will do it, or networkmanager can set it up if it has >a config or having a network-scripts file for it saying onboot=yes or >a ifup <device> with a network-scripts ifcfg-dev file defining it. >Otherwise the device is down and ifconfig will not show it. >"ip link" is the new way to show it, and should show all hw interfaces >whether up or not. Thanks that was helpfull. Got the interface "up". No idea why it was down. I did not use it for some years, but I'm sure it worked at that time and was "up" regards Jouk Pax, vel iniusta, utilior est quam iustissimum bellum. (free after Marcus Tullius Cicero (106 b.Chr.-46 b.Chr.) Epistularum ad Atticum 7.1.4.3) Touch not the cat bot a glove >------------------------------------------------------------------------------< Jouk Jansen joukj(a)hrem.nano.tudelft.nl Technische Universiteit Delft tttttttttt uu uu ddddddd Kavli Institute of Nanoscience tttttttttt uu uu dd dd Nationaal centrum voor HREM tt uu uu dd dd Lorentzweg 1 tt uu uu dd dd 2628 CJ Delft tt uu uu dd dd Nederland tt uu uu dd dd tel. 31-15-2782272 tt uuuuuuu ddddddd >------------------------------------------------------------------------------<

1 0

Re: (fedora) second ethernet device not "seen"
by Jouk Jansen 08 Nov '20

08 Nov '20

users(a)lists.fedoraproject.org wrote on 7-NOV-2020 15:43:13.88 >On 11/7/20 4:13 AM, Jouk Jansen wrote: >> Why is much more done for enp4s0 than for enp6s0? >do you have an ethernet cable plugged into both? Yes Pax, vel iniusta, utilior est quam iustissimum bellum. (free after Marcus Tullius Cicero (106 b.Chr.-46 b.Chr.) Epistularum ad Atticum 7.1.4.3) Touch not the cat bot a glove >------------------------------------------------------------------------------< Jouk Jansen joukj(a)hrem.nano.tudelft.nl Technische Universiteit Delft tttttttttt uu uu ddddddd Kavli Institute of Nanoscience tttttttttt uu uu dd dd Nationaal centrum voor HREM tt uu uu dd dd Lorentzweg 1 tt uu uu dd dd 2628 CJ Delft tt uu uu dd dd Nederland tt uu uu dd dd tel. 31-15-2782272 tt uuuuuuu ddddddd >------------------------------------------------------------------------------<

1 0

USB error: vendor cannot be 0
by ToddAndMargo 07 Nov '20

07 Nov '20

Hi All, Anyone know a work around for this? Fedroa 32, x64 $ rpm -qa virt-manager virt-manager-3.1.0-1.fc32.noarch $ rpm -qa qemu-device-usb-redirect qemu-device-usb-redirect-5.1.0-7.fc32.x86_64 Bug I filed on 2020-06-23: libvirt.libvirtError: internal error: vendor cannot be 0. https://bugzilla.redhat.com/show_bug.cgi?id=1850091 I am trying to install a USB Host device for my Samsung BAR flash drive and I get the following error: Unable to add device: internal error: vendor cannot be 0. Many thanks, -T Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/addhardware.py", line 1289, in _finish_cb failure = self._add_device(dev) File "/usr/share/virt-manager/virtManager/addhardware.py", line 1281, in _add_device self.vm.add_device(dev) File "/usr/share/virt-manager/virtManager/object/domain.py", line 580, in add_device self._redefine_xmlobj(xmlobj) File "/usr/share/virt-manager/virtManager/object/libvirtobject.py", line 383, in _redefine_xmlobj self._redefine_xml_internal(origxml, newxml) File "/usr/share/virt-manager/virtManager/object/libvirtobject.py", line 366, in _redefine_xml_internal self._define(newxml) File "/usr/share/virt-manager/virtManager/object/domain.py", line 1065, in _define self.conn.define_domain(xml) File "/usr/share/virt-manager/virtManager/connection.py", line 554, in define_domain return self._backend.defineXML(xml) File "/usr/lib64/python3.8/site-packages/libvirt.py", line 4361, in defineXML raise libvirtError('virDomainDefineXML() failed') libvirt.libvirtError: internal error: vendor cannot be 0. This is the info on the drive: $ udevadm info /dev/bus/usb/002/005 P: /devices/pci0000:00/0000:00:14.0/usb2/2-4 N: bus/usb/002/005 L: 0 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-4 E: DEVNAME=/dev/bus/usb/002/005 E: DEVTYPE=usb_device E: DRIVER=usb E: PRODUCT=90c/1000/1100 E: TYPE=0/0/0 E: BUSNUM=002 E: DEVNUM=005 E: MAJOR=189 E: MINOR=132 E: SUBSYSTEM=usb E: USEC_INITIALIZED=13609827609 E: ID_VENDOR=Samsung E: ID_VENDOR_ENC=Samsung E: ID_VENDOR_ID=090c E: ID_MODEL=Flash_Drive E: ID_MODEL_ENC=Flash\x20Drive E: ID_MODEL_ID=1000 E: ID_REVISION=1100 E: ID_SERIAL=Samsung_Flash_Drive_0327918050002584 E: ID_SERIAL_SHORT=0327918050002584 E: ID_BUS=usb E: ID_USB_INTERFACES=:080650: E: ID_VENDOR_FROM_DATABASE=Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) E: ID_MODEL_FROM_DATABASE=Flash Drive E: ID_PATH=pci-0000:00:14.0-usb-0:4 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_4

2 14

Re: (fedora) Re: second ethernet device not "seen"
by Jouk Jansen 07 Nov '20

07 Nov '20

Samuel Sieb wrote on 7-NOV-2020 09:40:05.79 >On 11/6/20 11:54 PM, Jouk Jansen wrote: >> I'm running Fedora 32. I have a Mobo with 2 internet connectors. However, >> the second one I do not "see" when I'm running Fedora 32. >> >> I already checked the following: >> >> - Bios : 2 devices enabled ?> - lspci | grep -i eth >> gives: >> 04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12) >> 06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12) >What does "lspci -k" show for those devices? 04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12) Subsystem: ASUSTeK Computer Inc. Motherboard Kernel driver in use: sky2 Kernel modules: sky2 06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12) Subsystem: ASUSTeK Computer Inc. Motherboard Kernel driver in use: sky2 Kernel modules: sky2 Regards Jouk Pax, vel iniusta, utilior est quam iustissimum bellum. (free after Marcus Tullius Cicero (106 b.Chr.-46 b.Chr.) Epistularum ad Atticum 7.1.4.3) Touch not the cat bot a glove >------------------------------------------------------------------------------< Jouk Jansen joukj(a)hrem.nano.tudelft.nl Technische Universiteit Delft tttttttttt uu uu ddddddd Kavli Institute of Nanoscience tttttttttt uu uu dd dd Nationaal centrum voor HREM tt uu uu dd dd Lorentzweg 1 tt uu uu dd dd 2628 CJ Delft tt uu uu dd dd Nederland tt uu uu dd dd tel. 31-15-2782272 tt uuuuuuu ddddddd >------------------------------------------------------------------------------<

4 4

second ethernet device not "seen"
by Jouk Jansen 07 Nov '20

07 Nov '20

Hi all, I'm running Fedora 32. I have a Mobo with 2 internet connectors. However, the second one I do not "see" when I'm running Fedora 32. I already checked the following: - Bios : 2 devices enabled - lspci | grep -i eth gives: 04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12) 06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12) - settings from the gnome panel only shows one device. If you try to "add" another one the MAC-adress of both devices show up in the choices. but after creations nothing seems to be added (appart from an extra file in /etc/sysconfig/network-scripts) - ifconfig shows only one of the devices. What should I do to make the second device useable? regards Jouk Pax, vel iniusta, utilior est quam iustissimum bellum. (free after Marcus Tullius Cicero (106 b.Chr.-46 b.Chr.) Epistularum ad Atticum 7.1.4.3) Touch not the cat bot a glove >------------------------------------------------------------------------------< Jouk Jansen joukj(a)hrem.nano.tudelft.nl Technische Universiteit Delft tttttttttt uu uu ddddddd Kavli Institute of Nanoscience tttttttttt uu uu dd dd Nationaal centrum voor HREM tt uu uu dd dd Lorentzweg 1 tt uu uu dd dd 2628 CJ Delft tt uu uu dd dd Nederland tt uu uu dd dd tel. 31-15-2782272 tt uuuuuuu ddddddd >------------------------------------------------------------------------------<

3 2

Unsafe paste notice -
by Bob Goodwin 07 Nov '20

07 Nov '20

Hon can I eliminate the unsafe paste notification in Fedora 32 xfce? -- Bob Goodwin - Zuni, Virginia, USA FEDORA-32/64bit LINUX XFCE Fastmail POP3

2 3

The (bad) state of Qt on GNOME / Wayland
by mario futire 07 Nov '20

07 Nov '20

I am developing a Qt app in Fedora 31 using the default GNOME wayland session and I am very sorry to see the state of Qt in this configuration. 1) qt creator crashes often (https://bugzilla.redhat.com/show_bug.cgi?id=1773356) the crash report tool does not seem to help 2) drag & drop does not work in Qt creator (and in no other Qt app) (https://bugzilla.redhat.com/show_bug.cgi?id=1774762 and https://bugreports.qt.io/browse/QTBUG-80303) 3) main window geometry cannot be restored when the application restarts (https://bugreports.qt.io/browse/QTBUG-80612) I think GNOME / Wayland / Qt it is just not ready and should not be offered as the default desktop session for Fedora. If I force Qt to use X11 emulations, things are much better. Probably Qt is responsible (but in the bug reports someone says that KDE / Wayland works well), and GNOME is not Qt, but there are so many Qt apps, that sending new users to a non working environment re-enforces the fact that "just works" is not true in Linux. Regards

6 9

Re: (fedora) second ethernet device not "seen"
by Jouk Jansen 07 Nov '20

07 Nov '20

joukj wrote on 7-NOV-2020 09:14:16.24 >I'm running Fedora 32. I have a Mobo with 2 internet connectors. However, >the second one I do not "see" when I'm running Fedora 32. >I already checked the following: > - Bios : 2 devices enabled > - lspci | grep -i eth > gives: > 04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12) > 06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12) > - settings from the gnome panel only shows one device. If you try to "add" > another one the MAC-adress of both devices show up in the choices. but > after creations nothing seems to be added (appart from an extra file in > /etc/sysconfig/network-scripts) > - ifconfig shows only one of the devices. > >What should I do to make the second device useable? some info from /var/log/messages: for the failing device: Nov 6 23:42:09 vlinder kernel: sky2 0000:06:00.0 enp6s0: renamed from eth0 Nov 6 22:42:38 vlinder systemd-udevd[525]: enp6s0: Process 'socket:@/org/freedesktop/hal/udev_event' failed with exit code 1. Nov 6 22:43:25 vlinder NetworkManager[2046]: <info> [1604699005.5997] manager: (enp6s0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3) For the available device: Nov 6 23:42:09 vlinder kernel: sky2 0000:04:00.0 enp4s0: renamed from eth1 Nov 6 22:42:38 vlinder systemd-udevd[588]: enp4s0: Process 'socket:@/org/freedesktop/hal/udev_event' failed with exit code 1. Nov 6 22:43:25 vlinder NetworkManager[2046]: <info> [1604699005.5792] manager: (enp4s0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2) Nov 6 22:43:25 vlinder NetworkManager[2046]: <info> [1604699005.5944] device (enp4s0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external') Nov 6 22:43:25 vlinder kernel: sky2 0000:04:00.0 enp4s0: enabling interface Nov 6 22:43:27 vlinder kernel: sky2 0000:04:00.0 enp4s0: Link is up at 100 Mbps, full duplex, flow control both etc.... Why is much more done for enp4s0 than for enp6s0? regards Jouk Pax, vel iniusta, utilior est quam iustissimum bellum. (free after Marcus Tullius Cicero (106 b.Chr.-46 b.Chr.) Epistularum ad Atticum 7.1.4.3) Touch not the cat bot a glove >------------------------------------------------------------------------------< Jouk Jansen joukj(a)hrem.nano.tudelft.nl Technische Universiteit Delft tttttttttt uu uu ddddddd Kavli Institute of Nanoscience tttttttttt uu uu dd dd Nationaal centrum voor HREM tt uu uu dd dd Lorentzweg 1 tt uu uu dd dd 2628 CJ Delft tt uu uu dd dd Nederland tt uu uu dd dd tel. 31-15-2782272 tt uuuuuuu ddddddd >------------------------------------------------------------------------------<

2 1

f31:: thunderbird/kde:: extension of window below desktop
by Adrian Sevcenco 06 Nov '20

06 Nov '20

Hi! So, because my mouse started to root it seems that a wrong or too long click did something to my thunderbird: the thunderbird windows actually goes under what is possible below desktop. The scrolling goes under the monitor window and obviously the cursor cannot go there. the thunderbird window cannot be resized in vertical size and also cannot be moved vertically ... Does anyone have any idea what is going on? Thank you!! Adrian

2 1

Migration strategy to F33 w/ btrfs?
by Richard Shaw 06 Nov '20

06 Nov '20

I've already done a dnf upgrade to F33 on my system that hasn't had a "clean" install since at least F24, but at some point I'd like to migrate to btrfs w/o LVM. My current plan is to replace my current SSD (500GB Samsung EVO 970 m.2) to a 1GB version with the process being loosely: 1. Add the new m.2 disk (via PCIE adapter) 2. Perform a clean install to it 3. Capture all the RPMs I have installed and install them on the new install 4. Migrate /etc and /var (where appropriate) 5. Move the new SSD to the MB m.2 slot and remove the old SSD and adapter (save for another system). Any better options? /home is already a separate 3TB spinning disk so that won't change for now. Thanks, Richard

4 9

← Newer
1
...
9
10
11
12
13
14
15
Older →

Jump to page: