livecd December 2006

livecd@lists.fedoraproject.org

31 participants
23 discussions

Intenet access with LiveCD?
by Jim Dever 11 May '07

11 May '07

Hi, I was excited to see the release of the Fedora LiveCD as I'm looking around at different distributions but for some reason I can't get it to see my internet connection at all. If anyone could point me in the right direction I'd appreciate it. NIC: Cnet PRO200WL PCI (not wireless) Router: Linksys RTP300 Output of ifconfig: eth0 Link encap:Ethernet HWaddr 00:80:AD:79:95:90 inet addr: 192.168.15.102 Bcast: 192.168.15.255 Mask: 255.255.255.0 inet6 addr: fe80::280:adiff:fe79:9590/64 Scope: Link UP BROADCAST MULTICAST MTU:1500 Metric: 1 RX packets: 13 errors: 170 dropped: 0 overruns: 0 frame: 0 TX packets: 0 errors: 10 dropped: 0 overruns: 0 carrier: 10 collisions: 0 txqueuelen: 1000 RX bytes: 2597 (2.5 KiB) TX bytes: 0 (0.0 b) Interrupt: 201 Base address: 0xec00 ----- I noticed that it says UP but not RUNNING. The Ubuntu LiveCD access the internet just fine so I know it's possible to MAKE it work. I just like to see it work before making room for a full install. I've used Linux before but it's been ages ago and before I had a NIC so I'm pretty new to this part. Any help would be appreciated! -- Jim

3 8

wireless and liveCD
by tony 06 Jan '07

06 Jan '07

I have been reading the list but not working on my liveCD because my machine died. One issue that I have with Fedora is the impossibility of using ndiswrapper to load Windows drivers for unsupported WiFi chipsets. I have a very nice $2 on ebay Linksys WUSB11v.4 adaptor that caused me much jumping though very large hoops to get working because of the 4K stack issue: http://ndiswrapper.sourceforge.net/mediawiki/index.php/Fedora I followed the instructions there to download a precompiled Fedora 6 kernel It appears to be pretty much impossible to build a liveCD that uses a wireless connection which is a shame because many of the aDSL bundles available now have a WiFi enabled box. Cheers Tony

6 13

Boot error
by Vnpenguin 02 Jan '07

02 Jan '07

Hi all, Using David's package, I'm trying to create myself a livecd with /etc/livecd/10-fedora-livecd-base.conf like config. I obtain iso file, ok, but when trying to boot it with qemu, I see: ... root (cd) Filesystem type is iso9660, using whole disk kernel /boot/vmlinuz ro quiet root=CDLABEL=LiveCD-20061227 rootfstype=iso9660 livecd [Linux-bzImage, setup=0x1e00, size=0x1b997f] initrd /boot/livecd-initramfs.img [Linux-initrd @ 0xc522000, 0x2cd149 bytes] Uncompressing Linux... Ok, boot the kernel. PCI: PIIX3: Enabling Passive Release on 0000:00:01.0 mount: unknown filesystem type 'squashfs' Bug in initramfs /init detected. Fropping to a shell. Good luck! bash: no job control in this shell bash-3.1# I use FC6's latest packages. Don't known how to fix this. Any help will be appreciated. TIA && Happy New Year ! -- http://vnoss.org

4 5

Announcing the Fedora 6 Zod live CD and live CD tools
by David Zeuthen 27 Dec '06

27 Dec '06

Hi, After lots of feedback, bug fixing and testing of the beta live CD announced 3 weeks ago, I'm pleased to announce the first official Fedora live CD. This live CD is based on packages from the Fedora Core 6 (codenamed "Zod") and Fedora Extras package collections and is such 100% free software. At a glance, the live CD features o Linux 2.6.18 o GNOME 2.16 desktop environment o GStreamer 0.10 multimedia framework o X.org 7.1 o AIGLX and Compiz for 3D desktop o Lots of applications including, but not limited to o Beagle (Desktop Search) o F-Spot (Photo Management) o Evolution (Email and Calendering) o Firefox (Web Browsing) o Ekiga (IP telephony) o Rhythmbox (Music Player) o Totem (Movie Player) o Games (Games) o The Gimp (Graphics) o Inkscape (Vector Graphics) o Abiword (Word Processor) o Gnumeric (Spreadsheet) o nautilus-open-terminal (For the adult in you) o Assistive Technology including the Orca screen reader o NetworkManager is on by default o VPN connectivity software including vnpc and OpenVPN o Partition editing via GParted o SELinux targeted mode including the SELinux trouble shooter o Many many fonts; almost 100% coverage o All the localizations included in FC6 and FC6 o All the input methods (SCIM) present in FC6 o Exclusive live CD wallpaper you won't find in FC6 or FE6! o R/W file system so you can install software on the running live CD o Ability to run from RAM if you have 1GB or more of memory o and lots and lots more.. The live CD is currently only available for i386 architectures. Support for other architectures including ppc and x86_64 is planned. The live cd weighs around 682MB. Download from http://download.fedora.redhat.com/pub/fedora/projects/live/FC-6-i386-livecd… SHA1SUM: 8771d21af1974492424438cbe42f1bae0161ea96 FC-6-i386-livecd-1.iso or get on the Torrent using http://torrent.fedoraproject.org/torrents/Zod-livecd-1-i386.torrent Feedback can be given in Bugzilla; file a bug against the component you have an issue with.. and make it block this tracker bug https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=FC6LiveCDTracker if you believe it's a live CD specific bug. Don't get burned on Christmas shopping, burn the gift of a live CD! ==== This live CD is built using a source code based on the pilgrim project. This is an open project and participation is encouraged and appreciated. See these documents on how to get involved hacking on the code and what it's all about http://gitweb.freedesktop.org/?p=users/david/livecd-tools.git;a=blob;hb=HEA… http://gitweb.freedesktop.org/?p=users/david/livecd-tools.git;a=blob;hb=HEA… Participate on the Fedora Live CD mailing list and the Wiki page to make the Fedora live CD experience even better http://fedoraproject.org/wiki/FedoraLiveCD http://www.redhat.com/mailman/listinfo/fedora-livecd-list The livecd-tools and fedora-livecd packages, which is required to rebuild the live CD, have just been submitted to Fedora Extras, see https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=220635 https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=220637 for details. Until these packages are in Extras, you can grab source and binary i386 packages from here http://people.redhat.com/davidz/livecd/ and start cranking out your own live CD's. Thanks and a merry Christmas break to everyone! David

5 7

HowTo install live-cd? (Newbie).
by Brian Durant 27 Dec '06

27 Dec '06

I have been trying to find a way to install the new live-cd on my IBM ThinkCentre A50p, but unlike Ubuntu, I don't see any obvious way of doing this. Is this something left for the future or am I missing something that is very obvious? Is there a HowTo floating around? Cheers, Brian

2 1

FC6-Zod-LiveCD Network Configurator
by Thomas Chung 22 Dec '06

22 Dec '06

Hmm, I don't see system-config-network. How are we expecting users to configure network if they are on static ip? Regards, -- Thomas Chung http://fedoraproject.org/wiki/ThomasChung

5 8

feasibility of using xen to produce installed system images?
by Jane Dogalt 16 Dec '06

16 Dec '06

In my project, I'm using qemu to generate system images as a non-root user. I've never used xen, as I have yet to discover as trivial a usage of it as qemu provides. (i.e. no configuration, a simple commandline, and there you are booting a livecd in a window). But that may just be a matter of time. I'm wondering if any of you, particularly xen leaning redhat folks, have considered using it as a sandbox to create installed system images in? E.g. that could then be modified by a script, and rolled into a live iso/usbimage? I have suspected that even if xen can do this, I'd still prefer qemu because I'm picky about the install system being given any access to information about the host build system. I.e. even processor type, let alone access to the host build system's root filesystem. (Yeah, I know, it's building to qemu's hardware... for some reason I can accept that more easily) The main thing that qemu solves for me, as opposed to pilgrims implementation of an alternate fedora installer, is the ability to run purely as a user. So one of my narrow questions is- can Xen do the same? I suppose its a rather minor quibble if you have to do some root configuration of xen or something, but again, that's one reason why I like qemu so much. Then there is the news about this KVM thing, which makes qemu even more attractive. Although it sort of sounds functionally equivalent to the non-free qemu kernel accelerator, for a limited set of hardware. (though that still sounds great). Anyway, forgive me for not reading the xen docs/faqs, but I'm assuming I can get a better/quicker answer off the top of some of your heads. -dmc/jdog __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

fc6 dvd builds fixed by latest yum updates.
by Skunk Worx 15 Dec '06

15 Dec '06

I noticed others have been having the same problem as me. Initially fc6 could build kadischi dvds, but a yum update broke a dependency somewhere along the line. The yum updates from yesterday fixed it for me. on i386 anyway. --- John

1 0

Xorg -configure during boot?
by Brian Varney 12 Dec '06

12 Dec '06

It seems like the preffered method of setting up X for Kadischi is using "vesa" driver. This works on a lot of machines but not all. If I get a machine that it doesn't work on, I can get X up and running with these commands: init 3 Xorg -configure cp xorg.conf.new /etc/X11/xorg.conf init 5 I would like to be able to run "Xorg -configure" and use the generated " new.xorg.conf" to run X with automatically on the livecd. I'm not sure where I would put this. Looking for suggestions.... Thanks for any help

1 0

Atomix Live 4.0
by Tomo Vučković 12 Dec '06

12 Dec '06

Atomix Live 4.0 build with Kadischi available for download at : ftp://mirror.etf.bg.ac.yu/distributions/AtomixLinux/4.0/live/Atomix-4.0-live.iso Screenshot preview : http://www.thecodingstudio.com/opensource/linux/screenshots/index.php?linux… -- S Potovanjem Tomo Vučković Atomix Solutions doo, Novi Sad Maksima Gorkog 2 e-mail: tomo.vuckovic(a)atomixlinux.org www.atomix-solutions.com www.atomixlinux.org www.atomix.co.yu -- S Potovanjem Tomo Vučković Atomix Solutions doo, Novi Sad Maksima Gorkog 2 e-mail: tomo.vuckovic(a)atomixlinux.org www.atomix-solutions.com www.atomixlinux.org www.atomix.co.yu

2 1

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

livecd December 2006