arm October 2013

arm@lists.fedoraproject.org

35 participants
26 discussions

Fwd: decent reasonably-priced armhf system with sata, gigabit ethernet, dual-core processor and 2gb of RAM
by lkcl . 21 Oct '13

21 Oct '13

i posted this to the debian-arm list but it occurred to me that you guys might appreciate having a decent desktop-style system as well as something with enough RAM to do compiles of some of the larger packages without needing to run into swap space, as well. joe (posting on arm-netbooks) has managed to get a sub-17-second boot to desktop out of the A20 when it's matched with 1gbyte 800mhz DDR3 RAM and a decent SATA SSD: now imagine what happens when that's 2gbyte 1333mhz DDR3 RAM :) enjoy. l. ---------- Forwarded message ---------- From: luke.leighton <luke.leighton(a)gmail.com> Date: Thu, Oct 17, 2013 at 12:56 PM Subject: decent reasonably-priced armhf system with sata, gigabit ethernet, dual-core processor and 2gb of RAM To: ARM <debian-arm(a)lists.debian.org> http://lists.phcomp.co.uk/pipermail/arm-netbook/2013-October/009073.html http://store.r0ck.me/blogs/news/9361679-cubietruck-is-ready-to-order-now this is from tom cubie who did the very successful cubieboard. specs look pretty damn good and pricing out of china is $90. i think this is the first reasonably-priced armhf system with interfaces that would actually like... be actually like... interesting? y'know? to debian power users? :) over the past 18 months typically everything else with 2gb RAM or SATA or Gigabit Ethernet has been $150 to $250 and in one extreme case over $600. to actually get all of those *and* built-in WIFI/BT *and* dual monitors (HDMI and VGA) for only $90 is nothing short of bloody miraculous. anyway. enjoy. l.

6 11

trimslice build tf101?
by Brian Kosick 21 Oct '13

21 Oct '13

Hi All, I have an aging Asus tf101 with the detachable keyboard and am getting fairly tired of the android app ecosystem. I was wondering since the trimslice and the tf101 both share the tegra 2 chipset if anyone had tried it on this device yet? and if so could share their expereince?

3 3

dracut plan for F20 images
by Dennis Gilmore 17 Oct '13

17 Oct '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hey all, I am going to install dracut-config-generic in the arm images for f20 so that we get a full generic initramfs in the images, but i will have it removed in %post so that on kernel updates people will get host only initramfs images which are smaller and specific to the host in question. Dennis -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAEBAgAGBQJSXwTCAAoJEH7ltONmPFDRTHIP/0zc+KQKhruxuhdxRIFwAgNP P6AaGy8jDfTJT5X/F58o6ubqkQeDwx+MoXRGekuJyqM6rhWNXHUZaJA6g49llE1D bxLnBD/Ub1TH4LCQ7yIa/7IFtSkArhEH3VmZxd9+HPwNxLSTwnrpy5K4l8O3Z9QV wXuI5duKPRyEtfb+5YUbve1R5yQMf5V4a4D34uVk5zMYj0Rob/z30fJd5JZFTvtj Iws85oghZpAdDb00yo3qA6HPVdJe5DadKlsqQXl5/3sMO5UvBmZ07kwpry3rvQ7g 4mqenmpVis2rmO5JMne0/I+HEwB+on6t33blitdGrz09IDDUr4E+OzoS1ZNDUpj5 Ay7rErVwP2YgoXT0cXSxx9Xxuwz+fDJ5Oh0MKFNZuHspNb1/lkdF3Dq7r9J2/N8J EeZwWkqxe6FkLs0YON6sgr+wgeOsjdwqDPXcERVlIE1iRRf385uSLuhQ+pDI1rKt m9rrCNcqOJ30g8BzVY/nGAaplnMscwDzuaekwPldlb5g2fQteh9JtV5LxWi6KjTz PoNqn5KSKQYLLj/UY1AsRGfM4XoEFmtqJnBDEIdPYlNwIXzSeORq+ZrTRW1NW6cy q0SDqx+qO5D/vl9G908u8lE6fLtdn/n61MKD4RbaGOO6Ic9DtA4/DZS0ICgiu1W6 b1UAn30TmidZs9bZlbkl =M3wE -----END PGP SIGNATURE-----

3 2

ARM board with two+ sata ports
by John Dulaney 16 Oct '13

16 Oct '13

Anyone know of an arm board, preferably with an A9+ cpu that has either a bunch of sata ports or a visible PCI bus? John.

3 2

new aarch64 test image
by d.marlin 14 Oct '13

14 Oct '13

There is a new aarch64 image for use with the foundation model. It boots using the efi work Mark Salter has implemented in the kernel. To use this image, please set up the Foundation Model as described in: http://fedoraproject.org/wiki/Architectures/ARM/AArch64/QuickStart Then download and extract this image in the aarch64 directory: cd ~/aarch64 wget http://dmarlin.fedorapeople.org/fedora-arm/aarch64/F19-aarch64-efi.tar.xz tar Jxvf F19-aarch64-efi.tar.xz Note: This image requires about 12GB free disk space to extract. The latest image supports virtio, so the kernel image, initramfs, and device tree blob included on the image will be used to boot. You no longer need to use separate "Kernel Packages". An example script for starting the model has been included in the tarball. This script performs the steps outlined in "Starting the Model" from the QuickStart wiki. Both console (telnet) and ssh access are supported. To start the model, 'cd' into the F19-aarch64-efi subdirectory and run the script: cd ~/aarch64/F19-aarch64-efi ./efi-aarch64.sh Notes: - You will require 'sudo' access in order to run this script. - The script assumes the foundation model is in: ~/aarch64/Foundation_v8pkg You will probably still need to follow the steps in "Allowing the Model to Connect to the Internet" from the QuickStart wiki, if you have not run the model before. Please post to this list if you encounter any problems or have questions. Thank you, d.marlin

1 0

Improved support for BeagleBone (Black) for Fedora 20
by Jason Kridner 11 Oct '13

11 Oct '13

Did you know that BeagleBone Black is *true* open hardware? This means that people can readily take the design and make their own custom changes to it even prototyping it in low quantities, such as being supported for the upcoming Arduino TRE. The same can't be said for some other boards in the same price range also looking to get Linux in the hands of more people. It is also $35 to distributors and those including it in other open hardware projects. OK, it might not have been best for me to start with a sales pitch, but it seems to me a lot of people aren't aware. I'd like to figure out who has interest in improving Fedora support on BeagleBone Black and what I can do to help them. We have a running image of Fedora... http://beagleboard.org/fedora has a bit more information on that as well as the desired end experience ...but there are a lot of things that need to be done to try to make it more appealing to expose more "makers" to Linux. First and foremost, support needs to be in the Fedora mainline, not on a remix. I'd be very happy if I was copied on any blocking issues in that regard so that I can help get them addressed. Second, we've built a unique experience around the BeagleBone where you can simply plug it in over USB, it shares any drivers necessary for Windows or Macs to get connected using an emulated flash drive and the virtual Ethernet connection over USB serves up an interactive board-hosted web site to learn about the board capabilities and interact with it. You can also simply ssh over the virtual Ethernet connection to develop locally on the board or using 'gdb' connected cross-tools like Eclipse. This same experience is being duplicated and extensively augmented on the upcoming Arduino TRE. The end result is to produce an image easy to install and use via the web browser and desktop for the almost 100,000 boards already out there and potentially replace the reference distro shipped with the boards 100,000s of boards yet to come and their derivatives. Please contact me and/or Dave Anders if you have interest in supporting this effort or need some help resolving issues related to any of the BeagleBoard.org boards.

7 9

Anyone have a working non-vexpress qemu command line?
by Cole Robinson 11 Oct '13

11 Oct '13

Hi all, Does anyone have a working qemu-system-arm command line with stock Fedora kernels for anything other than -machine vexpress* ? dgilmore mentioned to me a while back that highbank and midway should work with F20, but I couldn't come up with a command line that produced any serial output (my metric for "it's alive") Thanks, Cole

2 1

SSD USB reset problems on Trimslice Pro
by Jeffrey Bastian 10 Oct '13

10 Oct '13

I just got a Trimslice Pro (a friend wasn't using it), and I booted the Fedora-Minimal-armhfp-20-Beta-TC2-sda image from an SD card and started copying it to the internal SSD, and started getting errors on the serial console: [ 864.153171] hub 1-0:1.0: cannot reset port 1 (err = -110) [ 864.382165] hub 1-0:1.0: cannot reset port 1 (err = -110) [ 864.611136] hub 1-0:1.0: cannot reset port 1 (err = -110) [ 864.616551] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? ... [ 923.473666] hub 1-0:1.0: cannot reset port 1 (err = -110) [ 923.702667] hub 1-0:1.0: cannot reset port 1 (err = -110) [ 923.931671] hub 1-0:1.0: cannot reset port 1 (err = -110) [ 924.574479] end_request: I/O error, dev sda, sector 240082 [ 924.579969] Buffer I/O error on device sda1, logical block 119017 [ 924.586047] Buffer I/O error on device sda1, logical block 119018 [ 924.592124] Buffer I/O error on device sda1, logical block 119019 ... [ 1422.769804] Buffer I/O error on device sda1, logical block 135410 [ 1422.977894] EXT4-fs error (device sda1) in ext4_writepages:2540: IO failure [ 1423.163072] EXT4-fs error (device sda1): ext4_journal_check_start:56: Detected aborted journal [ 1423.171705] EXT4-fs (sda1): Remounting filesystem read-only [ 1423.880858] EXT4-fs (sda1): ext4_writepages: jbd2_start: 1024 pages, ino 31; err -30 [ 1433.542568] hub 1-0:1.0: cannot reset port 1 (err = -110) This is using the 3.11.3-301.fc20.armv7hl kernel. Searching the list archives, I see this has come up before, but there doesn't seem to be a resolution: https://lists.fedoraproject.org/pipermail/arm/2013-January/005114.html Is this a kernel bug? Or is the SSD starting to fail? Thanks, Jeff

4 10

Announcing Fedora 19 ARM remix for Allwinner SOCs release 2
by Hans de Goede 10 Oct '13

10 Oct '13

Hi All, I'm very happy to announce the second release (r2) of my Fedora 19 ARM remix images for Allwinner A10, A10s, A13 and A20 based devices. This release is based on the official Fedora 19 Final for ARM images, with u-boot and kernel(s) from the linux-sunxi project: http://linux-sunxi.org/ Here is what is new in r2: New features: -Added support for the buttons on various olinuxino boards -Added support for using 7" or 10" lcd module with various olinuxino boards -Added spi support (except on A20) -Added pwm support -Added support for power buttons connected to an AXP152 pmic -Improved A20 support, adding kernel support for the following pheriphals: -usbc0 / otg usb controller -nand -mali (*) -g2d (*) -cedar (*) -resistive touchscreen (sun4i-ts) -gpio -ir receiver -leds *) kernel driver only, needs userspace blobs New boards: -Marsboard A10 -Sanei N90 Bug fixes: -Fixed USB-1 device support (OHCI) controller on A10s / A13 -Fixed reboot being unreliable on A10s / A13 -Fixed the power button on AXP209 + A20 not working -Fixed 6 second bootup delay when going from uboot to kernel on A20 -Fixed invalid reporting of high load on some boards You can download it here: http://scotland.proximity.on.ca/contrib-images/hansg/Fedora-19-a10-armhfp-r… sha1sum: 2c633c84d5b0c9d0f6118e9a8217395d45978d8 It is important to read the README, the image standard comes without u-boot pre-loaded since u-boot is board specific. The image includes a user-friendly simple script to install the right u-boot for your board, but if you simply xzcat the image to an sdcard, and then boot your device with the sdcard, things will *not* work. See the README for a list of currently supported boards. Known Issues: -Many boards don't have an rtc (A10 and A20 have a builtin one), or at least no battery backup for it, resulting in the date + time being wrong. -If the date is of by more then a couple of months, "yum update" won't work because certificate validation fails for the https connection yum tries to make. So if yum fails to get its repodata first check (and fix) your date -The wifi chip on the Auxtek-T004 hdmi-stick is unsupported atm Enjoy, Hans And to make sure everyone reads the README, let me print it here in full: Fedora 19 ARM for Allwinner A10, A10s, A13 and A20 devices README ----------------------------------------------------------------- Quickstart guide ---------------- 1) Insert an sdcard, note any data on the card will be destroyed! 2) Make sure the card is not mounted, run "mount" and if the card shows up in the output umount its partitions 3) Write the img file to the card, ie as root do: xzcat Fedora-19-a10-armhfp-r2.img.xz > /dev/mmcblk0 sync 4) The card is not yet ready for use! Since the A10 u-boot is board specific, the image comes without any uboot install, follow the next steps to install the right u-boot for your board 5) Remove the card, and re-insert it. The uboot partition should get automatically mounted, if not mount it manually, 6) As root (or through sudo) run: <uboot-part-mount>/select-board.sh, ie: sudo /run/media/hans/uboot/select-board.sh If you've dialog installed the select-board.sh script will prompt for your board. If you don't have dialog installed, it will print the list of supported boards. Lookup your board and re-run the script with the shortname for your board as argument, ie: sudo sh /run/media/hans/uboot/select-board.sh mk802 7) umount the uboot and rootfs partitions, ie: umount /run/media/hans/uboot umount /run/media/hans/rootfs 8) Your sdcard is now ready for use 9) *Before* powering up your A10 device connect it to an hdmi or dvi monitor 10) When first booting from the sdcard inserted Fedora will automatically reboot once, this is part of the process to resize the root partition to fill the entire sdcard and is normal behavior. 11) After the automatic reboot Fedora will start with the initial-setup wizard: 11a) Configure networking, note: * If you've an A10 board with wired ethernet and you want to use dhcp you don't need to do anything. * If you've an A20 board, your ethernet may have a random mac-address, so if you want to configure a static ip-address and want it to stick across reboots, go to the ethernet-tab, select the mac-address field and delete its contents, so that the static ip address you're configuring does not get tied to the random mac-address. 11b) Setup the time zone 11c) Set a root password 11d) Create a user 12) Log in as the just created user 13) Enjoy Fedora on your A10 device Supported Devices: ------------------ Fedora 19 ARM for Allwinner A10 has been tested with the following devices: * A10s-OLinuXino-MICRO (Olimex) * A13-OLinuXino (Olimex) * A13-OLinuXino-MICRO (Olimex) * A20-OLinuXino-MICRO (Olimex) * Auxtek T003 hdmi tv stick * Auxtek T004 hdmi tv stick * BA10 TV Box * Cubieboard development board 1024 MB RAM * Cubieboard2 (A20) development board * Gooseberry development board * Mele A1000G/A2000G 1024 MB RAM * Mini-X 1024 MB RAM * mk802 (with female mini hdmi) 512 MB RAM * mk802 with A10s (s with a circle around it on the barcode label) * mk802ii (with male normal hdmi) 1024 MB RAM * r7 hdmi tv stick * UHost U1A hdmi tv stick * Wobo i5 TV Box Fedora 19 ARM should also work on the following devices: * A10 tablet sold under various names (whitelabel) * A13 tablet sold under various names (whitelabel) * Coby MID7042 tablet * Coby MID8042 tablet * Coby MID9742 tablet * Cubieboard development board 512 MB RAM * DNS AirTab M82 tablet * EOMA68 A10 CPU card * H6 netbook * Hackberry development board * Hyundai a7hd tablet * iNet-97F Rev.2 (and clones) tablet * Marsboard A10 * Mele A1000/A2000 512 MB RAM * Mele A3700 * Mini-X 512 MB RAM * mk802 (with female mini hdmi) 1024 MB RAM * pcDuino development board * Point of View ProTab 2 IPS 9" tablet * Point of View ProTab 2 IPS tablet with 3g * Sanei N90 * XZPAD700 7" tablet Configuring the display output ------------------------------ Multiple video outputs at the same time are not supported. By default hdmi output with EDID is used for all devices, except for tablets/netbooks where the default output is the lcd. The default hdmi output with EDID will get the native resolution of your TV / monitor and use that. Note that in order for this to work your TV / monitor must be connected *and turned on*, before booting your device. The output resolution can be configured with the disp.screen0_output_mode kernel cmdline value, which can be found in the extrargs part of uEnv.txt in the uboot partition. The default uEnv.txt contains the following value: disp.screen0_output_mode=EDID:1280x720p60 This means try to use EDID and if no valid EDID info is found fallback to 1280x720p60. The used output can be changed by adding disp.screen0_output_type=X to the extraargs in uEnv.txt. With X being one of: 0:none; 1:lcd; 2:tv; 3:hdmi; 4:vga Some per display type notes: -lcd outputs: Hardcoded to the native mode, disp.screen0_output_mode is ignored -tv: For the cvbs output disp.screen0_output_mode must be set to one of the following: pal, pal-svideo, ntsc, ntsc-svideo, pal-m, pal-m-svideo, pal-nc, pal-nc-svideo. Note the -svideo variants should only be used on boards with an svideo connector, for composite out use the regular variants, ie: disp.screen0_output_type=2 disp.screen0_output_mode=pal -hdmi: To override the EDID detected mode, drop the "EDID:" from the disp.screen0_output_mode value and set it to the desired mode, ie: disp.screen0_output_type=3 disp.screen0_output_mode=1360x768p60 -vga: Does not support EDID, "EDID:" must be removed from the disp.screen0_output_mode value otherwise it will be ignored. interlaced progressive and refreshrate settings specified are ignored, each resolution has hardcoded values for these. Example usage: disp.screen0_output_type=4 disp.screen0_output_mode=1024x768 USB controller caveats ---------------------- The OTG USB controller in host mode only supports a limited number of devices, plugging in a hub + mouse + keyboard typically will make either the mouse or keyboard not work. This is a hardware limitation which we will likely not be able to work around. On tv-sticks and top-set boxes, simply avoid the otg connector, instead use a hub in a regular host usb connector. Note on the mini-x the otg / host marking is not always correct. If things don't work try using the OTG connector instead! On tablets and the gooseberry unfortunately only the otg connector is available. One solution there is using a single usb-device which is both a keyboard and a mouse at the same time. IE the receiver for logitech wireless desktop sets. Supported hardware components / features: ----------------------------------------- Fedora 19 ARM for Allwinner A10 supports the following components: * CPU + PMU + RAM * Serial ports * MMC cards * Internal NAND storage * Framebuffer on lcd / vga / hdmi / composite video * Sound both analog out and over hdmi * OTG USB controller * Both standard USB host controllers * Wifi * Wired Ethernet * SATA * IR (untested at this time) * SPI (as module, not supported on A20) * "tablet" keys on olinuxino boards * 7 and 10 inch lcd displays on olinuxino boards (requires selecting the right config in select-board.sh Unsupported hardware components: -------------------------------- The following components require various proprietary blobs to be used, and as such are not supported in the Fedora images. The kernel drivers for them are present (usually as modules), so if you add the necessary blobs you might get these to work: * Mali 400 GPU * Cedar hardware video & audio decoding and encoding engine * G2D 2d engine Differences from stock Fedora ----------------------------- * Since the A10 is not a very powerful soc some services which are enabled by default on Fedora are disabled in the image, see build-image.sh for a list. * No plymouth: we log to a serial console for debugging so no pretty splash. Also we don't use an initrd, so removing the console=ttyS0,115200 from the extraargs in uEnv.txt will give plymouth, but so late it hardly matters. Rebuilding the Fedora 19 ARM for Allwinner A10 disk image --------------------------------------------------------- Building the Fedora 19 ARM for Allwinner A10 disk image consists of 2 steps 1) Building a uboot.tar.gz and rootfs.tar.gz "overlays", this is done bu the build-boot-root-sh script 2) Combining uboot.tar.gz and rootfs.tar.gz with an official Fedora 19 arm img, this combining is done by the build-image.sh script The a10 image you downloaded is based on Fedora-XFCE-armhfp-19-1-sda.raw These scripts are hosted here: https://github.com/jwrdegoede/sunxi-fedora-scripts.git A copy of the exact versions of these scripts used to build this Fedora A10 image can be found in the scripts directory of the uboot partition, the kernel config used during the build can be found here too. If you want to exactly reproduce this image it is important to use the scripts from the scripts dir of the uboot partition, as the scripts contain GIT tags used during the build to checkout the exact versions to build. The pre-conditions these scripts expect to be met, and the exact usage of them is documented in comments in the top of each script.

2 2

Re: [fedora-arm] [linux-sunxi] Re: Announcing Fedora 19 ARM remix for Allwinner SOCs release 1, now with A20 support
by Hans de Goede 10 Oct '13

10 Oct '13

Hi, On 09/19/2013 03:47 PM, davide.soldan.kynetics(a)gmail.com wrote: > Hi Hans, > I'm having a problem testing your fedora 19 remix on Olinuxino a10s. > The board boot well, and I can login from the serial port, but Xorg crashes with these outputs: > at boot: http://pastebin.com/PEZf9eKq > after boot if I login and try startx: http://pastebin.com/HateKEi8 > the board/sdcard/hdmi cable works well as I can run the base debian distro from olimex with the same components. > Also the various script.bin, uImage ecc should be ok as I checked that were the one's for sun5i. > Can you help me with this problem? Yes, there was an error in the fex / script.bin file for the Olinuxino a10s causing it to not send video to the hdmi output with Fedora 19 ARM remix for Allwinner SOCs release 1. This is fixed in release 2, but in release 2 I ended up picking a bad u-boot snapshot (and doing a bad QA job as well), so that one does not boot on sun5i devices at all. Attached is a good script.bin for the Olinuxino a10s, if you drop this in the u-boot partition of your sdcard the hdmi out should work. Regards, Hans

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

arm October 2013