arm December 2017

arm@lists.fedoraproject.org

9 participants
8 discussions

Fedora 27 on Banana Pi M64
by Jan Pazdziora 28 Feb '18

28 Feb '18

Hello, I've got Banana Pi M64 on which I am able to run 2017-08-14-ubuntu-16.04-mate-desktop-beta-aarch64-bpi-m64-sd-emmc.img from http://www.banana-pi.org/m64-download.html reasonably well, except for failing WiFi connections to hidden SSID networks and for kodi being unbearably slow, even the UI and mouse movements. So seeing Ubuntu MATE not failing completely, I thought I'd give Fedora a try. I've used Fedora-Minimal-27-1.6.aarch64.raw.xz Upon boot I see U-Boot (?) output and EFI lines and then row of Tuxes and initial boot messages but then my TV goes blank. At no point during the boot (like grub interface) do I have USB (mouse, keyboard) working. When I add the dtb symlink to workaround https://bugzilla.redhat.com/show_bug.cgi?id=1528575 I see wired networking and DHCP working. Upgrading kernel seems to break the wired networking https://bugzilla.redhat.com/show_bug.cgi?id=1528593 but with all the other packages from updates upgraded, the board still works including wired networking and DHCP. The initial-setup.service seems to be looping during the boot and it seems to also affect dnf operations so I've disabled it. Is there any opinion about how well can Banana Pi M64 be supported by Fedora at this point, given that the board seems fine under Ubuntu MATE but that might include some non-OSS bits that we might not want in Fedora. Specifically missing at this point seems to be USB support, console after boot, and WiFi networking. Is there anything which might be useful to try? -- Jan Pazdziora Senior Principal Software Engineer, OpenShift Security Team, Red Hat

2 9

Summary of Fedora on Odroid XU4
by arm_ml＠rirasoft.de 08 Jan '18

08 Jan '18

Summary of Fedora on Odroid XU4 1. with Kernel 4.6.5-300.fc24 system boots without failure, but update to newer kernel fails due dracut didn't build suitable intramfs https://bugzilla.redhat.com/show_bug.cgi?id=1482825 2. newer kernel works only with "cpuidle.off=1" inserted into the "append" kernel line in the /boot/extlinux/extlinux.conf file, but all USB3 Hosts failed, no onboard ethernet 3. To boot the system from the eMMC card: A. The initramfs image file must be rebuilt. The simplest way is to: a. Boot up using the MicroSD card; b. Partition the eMMC card such that partition 1 begins on sector 3072 (Default starting sector from fdisk is 2048). There should be 4 partitions created; c. Mount the Fedora image desired to be installed on the eMMC card; d. Copy all partition data from the mounted fedora image partitions (there are 4 for Fedora 26 ARM images) to the appropriate eMMC partitions; e. Update the UUID values on what will be the /boot/extlinux/extlinux.conf file and /etc/fstab files of the eMMC card; f. Assuming the eMMC partitions are mounted as such -- mount /dev/mmcblk1p4 /mnt mount /dev/mmcblk1p2 /mnt/boot then perform the following mounts -- mount -o bind /proc /mnt/proc mount -o bind /dev /mnt/dev mount -o bind /sys /mnt/sys B. Rebuild the eMMC card's initramfs by executing the following command: chroot /mnt dracut --add-drivers='pwrseq_emmc mmc_block' /boot/initramfs-4.11.8-300.fc26.armv7hl.img 4.11.8-300.fc26.armv7hl C. Flash the boot information in the header of the eMMC card; C. Shutdown the system, then remove the MicroSD card; D. Boot up using the eMMC card. 4. If the system is to be updated using "dnf update", a new initramfs image must again be generated. This can be done using steps 1f - B. above using the new initramfs and kernel images provided by the "dnf update". ---------------------------------------------------------------- Note to the developers/maintainers of dracut: The kernel modules "pwrseq_emmc" and "mmc_block" should be included in dracut for the Odroid-XU3 and Odroid-XU4 such that the user need not have to execute this procedure each time and update to the system is performed. Is this correct and complete ? Andreas

9 38

activation of SPI on fedora26 with a raspberry3
by christophe pages 28 Dec '17

28 Dec '17

Hello, I try to activate the spi on my raspberry3 using a fedora 26. I tried these options: device_tree_param=spi=on dtoverlay=spi-bcm2708 I use this kernel: 4.12.5-300.fc26.armv7hl I see that the support in kernel seems already inside: CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y But I never see the devices /dev/spi* appearing. I can't see any messages regarding spi in dmesg. I tested with a raspbian and I see them correctly. I think I miss somethiing. Could you help. Thanks.

3 5

[Fedocal] Reminder meeting : Fedora ARM & AArch64 status meeting
by pwhalen＠redhat.com 24 Dec '17

24 Dec '17

Dear all, You are kindly invited to the meeting: Fedora ARM & AArch64 status meeting on 2017-12-26 from 15:00:00 to 16:00:00 UTC At fedora-meeting-2(a)irc.freenode.net The meeting will be about: Fedora ARM & AArch64 weekly status meeting. More information available at: [https://fedoraproject.org/wiki/Architectures/ARM](https://fedoraproject.org… Source: https://apps.fedoraproject.org/calendar/meeting/8708/

1 0

[Fedocal] Reminder meeting : Fedora ARM & AArch64 status meeting
by pwhalen＠redhat.com 19 Dec '17

19 Dec '17

Dear all, You are kindly invited to the meeting: Fedora ARM & AArch64 status meeting on 2017-12-19 from 15:00:00 to 16:00:00 UTC At fedora-meeting-2(a)irc.freenode.net The meeting will be about: Fedora ARM & AArch64 weekly status meeting. More information available at: [https://fedoraproject.org/wiki/Architectures/ARM](https://fedoraproject.org… Source: https://apps.fedoraproject.org/calendar/meeting/8697/

2 1

using the rpi gpio python module
by Arno A. Karner 17 Dec '17

17 Dec '17

what kernel modules need to be loaded, configuration file changes on Fedora 27 32 bit on pi2 I get # python2 blinkled.py Segmentation fault (core dumped) # python3 blinkled.py Segmentation fault (core dumped) # uname -a Linux f27-arm7-32-rpi2.dmz1.ipa.tnss.com 4.14.3-300.fc27.armv7hl #1 SMP Mon Dec 4 18:55:57 UTC 2017 armv7l armv7l armv7l GNU/Linux # rpmq -i gpio python2-RPi.GPIO:0.6.3:4.fc27:armv7hl:Fedora Project:Fedora Project python3-RPi.GPIO:0.6.3:4.fc27:armv7hl:Fedora Project:Fedora Project sgpio:1.2.0.10:19.fc27:armv7hl:Fedora Project:Fedora Project on Fedora 26 64 bit on pi 3 I get # python2 blinkled.py Traceback (most recent call last): File "blinkled.py", line 14, in <module> import RPi.GPIO as GPIO File "/usr/lib64/python2.7/site-packages/RPi/GPIO/__init__.py", line 23, in <module> from RPi._GPIO import * RuntimeError: This module can only be run on a Raspberry Pi! # python3 blinkled.py Traceback (most recent call last): File "blinkled.py", line 14, in <module> import RPi.GPIO as GPIO File "/usr/lib64/python3.6/site-packages/RPi/GPIO/__init__.py", line 23, in <module> from RPi._GPIO import * RuntimeError: This module can only be run on a Raspberry Pi! # uname -a Linux f26-arm8-64-aak.dmz1.ipa.tnss.com 4.14.4-200.fc26.aarch64 #1 SMP Fri Dec 8 20:34:59 UTC 2017 aarch64 aarch64 aarch64 GNU/Linux Thanks in advance for any help Arno

2 1

[Fedocal] Reminder meeting : Fedora ARM & AArch64 status meeting
by pwhalen＠redhat.com 12 Dec '17

12 Dec '17

Dear all, You are kindly invited to the meeting: Fedora ARM & AArch64 status meeting on 2017-12-12 from 15:00:00 to 16:00:00 UTC At fedora-meeting-2(a)irc.freenode.net The meeting will be about: Fedora ARM & AArch64 weekly status meeting. More information available at: [https://fedoraproject.org/wiki/Architectures/ARM](https://fedoraproject.org… Source: https://apps.fedoraproject.org/calendar/meeting/5170/

2 1

[Fedocal] Reminder meeting : Fedora ARM & AArch64 status meeting
by pwhalen＠redhat.com 04 Dec '17

04 Dec '17

Dear all, You are kindly invited to the meeting: Fedora ARM & AArch64 status meeting on 2017-12-05 from 15:00:00 to 16:00:00 UTC At fedora-meeting-2(a)irc.freenode.net The meeting will be about: Fedora ARM & AArch64 weekly status meeting. More information available at: [https://fedoraproject.org/wiki/Architectures/ARM](https://fedoraproject.org… Source: https://apps.fedoraproject.org/calendar/meeting/5170/

2 1

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

arm December 2017