arm September 2017

arm@lists.fedoraproject.org

13 participants
21 discussions

Summary of Fedora on Odroid XU4
by arm_ml＠rirasoft.de 08 Jan '18

08 Jan '18

Summary of Fedora on Odroid XU4 1. with Kernel 4.6.5-300.fc24 system boots without failure, but update to newer kernel fails due dracut didn't build suitable intramfs https://bugzilla.redhat.com/show_bug.cgi?id=1482825 2. newer kernel works only with "cpuidle.off=1" inserted into the "append" kernel line in the /boot/extlinux/extlinux.conf file, but all USB3 Hosts failed, no onboard ethernet 3. To boot the system from the eMMC card: A. The initramfs image file must be rebuilt. The simplest way is to: a. Boot up using the MicroSD card; b. Partition the eMMC card such that partition 1 begins on sector 3072 (Default starting sector from fdisk is 2048). There should be 4 partitions created; c. Mount the Fedora image desired to be installed on the eMMC card; d. Copy all partition data from the mounted fedora image partitions (there are 4 for Fedora 26 ARM images) to the appropriate eMMC partitions; e. Update the UUID values on what will be the /boot/extlinux/extlinux.conf file and /etc/fstab files of the eMMC card; f. Assuming the eMMC partitions are mounted as such -- mount /dev/mmcblk1p4 /mnt mount /dev/mmcblk1p2 /mnt/boot then perform the following mounts -- mount -o bind /proc /mnt/proc mount -o bind /dev /mnt/dev mount -o bind /sys /mnt/sys B. Rebuild the eMMC card's initramfs by executing the following command: chroot /mnt dracut --add-drivers='pwrseq_emmc mmc_block' /boot/initramfs-4.11.8-300.fc26.armv7hl.img 4.11.8-300.fc26.armv7hl C. Flash the boot information in the header of the eMMC card; C. Shutdown the system, then remove the MicroSD card; D. Boot up using the eMMC card. 4. If the system is to be updated using "dnf update", a new initramfs image must again be generated. This can be done using steps 1f - B. above using the new initramfs and kernel images provided by the "dnf update". ---------------------------------------------------------------- Note to the developers/maintainers of dracut: The kernel modules "pwrseq_emmc" and "mmc_block" should be included in dracut for the Odroid-XU3 and Odroid-XU4 such that the user need not have to execute this procedure each time and update to the system is performed. Is this correct and complete ? Andreas

9 38

activation of SPI on fedora26 with a raspberry3
by christophe pages 28 Dec '17

28 Dec '17

Hello, I try to activate the spi on my raspberry3 using a fedora 26. I tried these options: device_tree_param=spi=on dtoverlay=spi-bcm2708 I use this kernel: 4.12.5-300.fc26.armv7hl I see that the support in kernel seems already inside: CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y But I never see the devices /dev/spi* appearing. I can't see any messages regarding spi in dmesg. I tested with a raspbian and I see them correctly. I think I miss somethiing. Could you help. Thanks.

3 5

Raspberry 3, latest RC and serial
by Alessio Ciregia 27 Sep '17

27 Sep '17

Someone has tested the latest RC of the Minimal image on the RPi3 using the serial console? Maybe I'm wrong, but it doesn't work as in previous composes was. It stops printing on the serial console as soon as the kernel is loaded. The append line in the extlinux.conf file seems ok. Tomorrow I will try again. In the meanwhile could someone confirm that it works? Thanks A.

3 6

[Fedocal] Reminder meeting : Fedora ARM & AArch64 status meeting
by pwhalen＠redhat.com 25 Sep '17

25 Sep '17

Dear all, You are kindly invited to the meeting: Fedora ARM & AArch64 status meeting on 2017-09-26 from 15:00:00 to 16:00:00 UTC At fedora-meeting-2(a)irc.freenode.net The meeting will be about: Fedora ARM & AArch64 weekly status meeting. More information available at: [https://fedoraproject.org/wiki/Architectures/ARM](https://fedoraproject.org… Source: https://apps.fedoraproject.org/calendar/meeting/5170/

2 1

Fedora ARM Minimal not booting RPi2
by Davi Garcia 23 Sep '17

23 Sep '17

Hi all, I'm trying to use the latest Fedora ARM Minimal image (26-1.5) with my RPi2 but it gets stuck at rainbow screen. I tested the same device, with the same sdcard and power supply, but with Raspibian and the problem doesn't happen. I'm using the following CLI to burn the image: # fedora-arm-image-installer --image=Fedora.xz --target=rpi2 --media=/dev/mmcblk0 Any advice? Regards, Davi Garcia

2 3

Docs on using Fedora-Everything-netinst-aarch64-27-20170912.n.0.iso with HiKey960?
by Konrad Rzeszutek Wilk 22 Sep '17

22 Sep '17

Hey, The HiKey960 is one of the supported list of devices per (https://fedoraproject.org/wiki/Architectures/ARM?rd=Architectures/AArch64) where it mentions that the 96Boards. But I am not finding any docs on how to install? The Linaro images are rootfs ones that would be loaded using fastboot (after a lot of pain of changing the boot to UEFI) and loading the right Android type images on the box.

3 9

Fedora rawhide on Odroid-HC1
by Tomasz Kłoczko 21 Sep '17

21 Sep '17

Hi. Looks like current version of the fedora-arm-image-installer does not have any Odroid SBCs on the list however looks kernel has included exynos5422-odroidxu{3,3-lite,4}.dtb so [robably one of those dtbs should be for Odroid-HC1. So .. maybe someone have been trying to install Fedora (best rawide) on Odroid-HC1? I'm looking for any advises about how to prepare sd card image or install Fedora over PXE. As long as this HW has 2GB RAM so it should be no problem with enough memory to start kickstart installer. kloczek -- Tomasz Kłoczko | LinkedIn: http://lnkd.in/FXPWxH

1 0

Fedora ARM & AArch64 Status Meeting Minutes 2017-09-19
by Paul Whalen 19 Sep '17

19 Sep '17

======================================================== #fedora-meeting-2: Fedora ARM and AArch64 Status Meeting ======================================================== Meeting started by pwhalen at 15:00:15 UTC. The full logs are available at https://meetbot.fedoraproject.org/fedora-meeting-2/2017-09-19/fedora_arm_an… . Meeting summary --------------- * 1) ==== Userspace Status ==== (pwhalen, 15:06:26) * No reported issues. (pwhalen, 15:07:39) * 2) ==== Kernel Status ==== (pwhalen, 15:07:51) * kernel-4.13.2-300.fc27 (pwhalen, 15:08:06) * LINK: https://koji.fedoraproject.org/koji/buildinfo?buildID=970831 (pwhalen, 15:08:06) * kernel-4.13.2-300.fc27 should resolve - Raspberry Pi 3: run-initial-setup hangs (bz#1487305). Please test and leave karma - https://bodhi.fedoraproject.org/updates/FEDORA-2017-0da1ebbe4f (pwhalen, 15:10:17) * 4.13 will be coming to F-26 and F-25 soon (pbrobinson, 15:10:22) * kernel-4.14.0-0.rc1.git1.1.fc28 (pwhalen, 15:11:25) * LINK: https://koji.fedoraproject.org/koji/buildinfo?buildID=972608 (pwhalen, 15:11:25) * Please test and report any issues to the list or #fedora-arm. (pwhalen, 15:11:42) * 3) ==== Bootloader Status ==== (pwhalen, 15:14:32) * uboot-tools-2017.09-1.fc27 (pwhalen, 15:14:39) * LINK: https://koji.fedoraproject.org/koji/buildinfo?buildID=972324 (pwhalen, 15:14:39) * Please test on the devices you have. Report any issues to the list or #fedora-arm. (pwhalen, 15:18:41) * 4) == F27 Beta == (pwhalen, 15:20:23) * Beta Blocker Bugs (pwhalen, 15:20:47) * LINK: https://qa.fedoraproject.org/blockerbugs/milestone/27/beta/buglist (pwhalen, 15:20:47) * 5) == Open Floor == (pwhalen, 15:30:08) Meeting ended at 15:37:25 UTC. Action Items ------------ Action Items, by person ----------------------- * **UNASSIGNED** * (none) People Present (lines said) --------------------------- * pwhalen (38) * pbrobinson (29) * rric (7) * jlinton (7) * zodbot (6) * jonmasters (4) * dmarlin (0) Generated by `MeetBot`_ 0.1.4 .. _`MeetBot`: http://wiki.debian.org/MeetBot

1 0

Re: Summary of Fedora on Odroid XU4
by searider74 19 Sep '17

19 Sep '17

Wonderful! Thanks Peter. Stewart Sent from my T-Mobile 4G LTE Device -------- Original message -------- From: Peter Robinson <pbrobinson(a)gmail.com> Date: 9/19/17 2:11 AM (GMT-08:00) To: Stewart Samuels <searider74(a)gmail.com> Cc: arm_ml(a)rirasoft.de, arm(a)lists.fedoraproject.org, Dennis Gilmore <dennis(a)ausil.us> Subject: Re: [fedora-arm] Re: Summary of Fedora on Odroid XU4 On Thu, Aug 31, 2017 at 5:27 AM, Stewart Samuels <searider74(a)gmail.com> wrote: > Andreas & Dennis, > > I have filed an upstream bug report regarding the USB3 and Ethernet > situation described below. You can get to the bug report using the > following link: > > https://bugzilla.redhat.com/show_bug.cgi?id=1487006 To note a bug in RHBZ is a Fedora bug not an upstream bug. That being said I was browsing through the actual upstream arm-kernel mailing list and it looks like others are seeing this problem and have actually sent patches [1]. Once there's been some review and when I get time I'll try to pull it int a Fedora kernel. [1] http://www.spinics.net/lists/arm-kernel/msg606525.html > On 08/30/2017 08:06 PM, Stewart Samuels wrote: > > Hello Andreas, > > I can now confirm that the onboard Ethernet for the Odroid-XU4 indeed does > NOT work in F26. Looking at the Odroid hardware model, it looks to me like > the onboard gigabit Ethernet port is tied to the USB3 controller. If so, it > makes sense that because USB3 is failing, the gigabit Ethernet may also > fail. I will file an upstream bug report regarding both the USB3 and > onboard Ethernet situation. > > Regards, > Stewart > > On 08/30/2017 07:59 AM, Stewart Samuels wrote: > > Hello Andreas, > > Close. As I am not using the onboard ethernet, I did not test that so I > cannot validate yet whether or not it works. However, I can validate that > the USB3 ports do not work. If I get a chance today sometime, perhaps I > will check the onboard ethernet. As a result, see my adjustment to line > item 2. embedded below. > > Regards, > Stewart > > On 08/30/2017 01:16 AM, arm_ml(a)rirasoft.de wrote: > > Summary of Fedora on Odroid XU4 > > 1. with Kernel 4.6.5-300.fc24 system boots without failure, but update to > newer kernel fails due dracut didn't build suitable intramfs > https://bugzilla.redhat.com/show_bug.cgi?id=1482825 > 2. newer kernel works only with "cpuidle.off=1" inserted into the "append" > kernel line in the /boot/extlinux/extlinux.conf file, but all USB3 Hosts > failed, no onboard ethernet > > 2. Fedora 26 released kernels work but the system fails to boot unless > "cpuidle.off=1" is inserted into the "append" kernel line in the > /boot/extlinux/extlinux.conf file. Additionally, the onboard USB3 ports > fail. > > 2. Fedora 26 released kernels work but the system fails to boot > unless "cpuidle.off=1" is inserted into the "append" kernel line in the > /boot/extlinux/extlinux.conf file. Additionally, the onboard USB3 ports > fail as does the onboard Ethernet port. > > > 3. To boot the system from the eMMC card: > A. The initramfs image file must be rebuilt. The simplest way is to: > a. Boot up using the MicroSD card; > b. Partition the eMMC card such that partition 1 begins on sector > 3072 > (Default starting sector from fdisk is 2048). There should be 4 > partitions created; > c. Mount the Fedora image desired to be installed on the eMMC card; > d. Copy all partition data from the mounted fedora image partitions > (there are 4 for Fedora 26 ARM images) to the appropriate eMMC partitions; > e. Update the UUID values on what will be the > /boot/extlinux/extlinux.conf file and /etc/fstab files of the eMMC card; > f. Assuming the eMMC partitions are mounted as such -- > mount /dev/mmcblk1p4 /mnt > mount /dev/mmcblk1p2 /mnt/boot > then perform the following mounts -- > mount -o bind /proc /mnt/proc > mount -o bind /dev /mnt/dev > mount -o bind /sys /mnt/sys > B. Rebuild the eMMC card's initramfs by executing the following command: > chroot /mnt dracut --add-drivers='pwrseq_emmc mmc_block' > /boot/initramfs-4.11.8-300.fc26.armv7hl.img 4.11.8-300.fc26.armv7hl > C. Flash the boot information in the header of the eMMC card; > C. Shutdown the system, then remove the MicroSD card; > D. Boot up using the eMMC card. > > 4. If the system is to be updated using "dnf update", a new initramfs image > must again be generated. This can be done using steps 1f - B. above using > the new initramfs and kernel images provided by the "dnf update". > > ---------------------------------------------------------------- > > Note to the developers/maintainers of dracut: > The kernel modules "pwrseq_emmc" and "mmc_block" should be included in > dracut for the Odroid-XU3 and Odroid-XU4 such that the user need not have to > execute this procedure each time and update to the system is performed. > > > > Is this correct and complete ? > > Andreas > > > > > > _______________________________________________ > arm mailing list -- arm(a)lists.fedoraproject.org > To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org >

1 0

Fedora-Server-armhfp-27-20170917.n.0-sda with uboot RC4 - no network
by Robert Moskowitz 18 Sep '17

18 Sep '17

Still no network. I got the lastest image and build the mSD card with: fedora-arm-image-installer --image=/home/rgm/arm/Fedora-Server-armhfp-27-20170917.n.0-sda.raw.xz --target=Cubieboard2 --media=/dev/sdb --norootpass --addconsole Then I got the lasted uboot, picked up the Cubieboard2 and added it to the mSD with: dd if=/home/rgm/arm/u-boot-sunxi-C2-with-spl.bin of=/dev/sdb bs=1024 seek=8; sync Booted up and checked the console log: # head screenlog.0 U-Boot SPL 2017.09-rc4 (Sep 06 2017 - 03:05:00) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 U-Boot 2017.09-rc4 (Sep 06 2017 - 03:05:00 +0000) Allwinner Technology CPU: Allwinner A20 (SUN7I) There was a dump that I will provide, it finally got to the config where I see: [ 494.534765] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 497.485052] Netfilter messages via NETLINK v0.30. [ 498.042942] ip_set: protocol 6 ================================================================================ ================================================================================ 1) [x] Language settings 2) [!] Time settings (English (United States)) (Timezone is not set.) 3) [ ] Network configuration 4) [!] Root password (No network devices available) (Password is not set.) 5) [!] User creation (No user will be created) Please make a selection from the above ['c' to continue, 'q' to quit, 'r' to refresh]: Note the No network devices available. Now earlier in the boot I caught the following error: [ 15.667874] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 15.675010] Control: 10c5387d Table: 6e79006a DAC: 00000051 [ 15.680755] Process systemd-udevd (pid: 402, stack limit = 0xee7de220) [ 15.687276] Stack: (0xee7dfcc8 to 0xee7e0000) [ 15.691633] fcc0: 00000000 00000002 c994f800 00000000 ee41c000 c994f800 [ 15.699805] fce0: bf1ae408 00000000 ffffffff ee7b1418 00000000 c03bb274 ee41c680 ee41c000 [ 15.707977] fd00: 00000008 ee41c000 ee41d000 00000001 ee41c680 ee41c780 bf1aa184 ee7b1418 [ 15.716149] fd20: c03d2080 bf1a9b88 ee7b1418 00000000 c98ad9d8 ef24ce00 ef24ce10 0000001b [ 15.723406] mmcblk0: mmc0:0007 SD16G 14.5 GiB [ 15.728755] fd40: c98e7824 bf1d32bc c98e6af0 f0bf0000 c66ff4f4 0000002f fffffffa 0000002f [ 15.736927] fd60: bf1d3194 ef24ce10 bf1d5014 00000000 00000000 c0799384 ef24ce10 c12bbac4 [ 15.745100] fd80: bf1d5014 c07975ac bf1d5014 ef24ce10 00000000 ef24ce10 ef24ce44 bf1d5014 [ 15.753271] fda0: 00000000 00000000 00000001 c07977cc 00000000 bf1d5014 c0797744 c0795784 [ 15.761442] fdc0: ef174f58 ef2299b4 bf1d5014 c98b9c00 c11f4ea0 c07969dc bf1d421e bf1d421f [ 15.769612] fde0: 00000073 bf1d5014 ffffe000 c98e7600 00000001 c07983c4 bf1d8000 ffffe000 [ 15.777782] fe00: c98e7600 c0301d84 8040003f 00000001 00000000 c0a58ae4 ee6d5000 ef6c95f4 [ 15.785952] fe20: 8040003e 00000002 c98e4b80 c04a92a8 014000c0 ee7dff50 c03d2080 c04a92a8 [ 15.794122] fe40: ef001e40 014000c0 0000000c bf1d5080 bf1d5080 ee7dff50 c98e7600 00000001 [ 15.802293] fe60: c98e7800 c98e7824 c03d2080 c03d6118 bf1d5080 ef851010 bf1d5080 ee7dff50 [ 15.810464] fe80: bf1d50c8 c03d5864 bf1d508c 00007fff bf1d5080 c03d2678 f0bb6000 c03d2110 [ 15.818634] fea0: c0a76b4c 00000000 bf1d9000 bf1d526c 00000054 b6bb0f00 00000000 00001d23 [ 15.826802] fec0: 00000000 00000003 ee7dff48 00000000 00000000 00000000 00000000 00000000 [ 15.834971] fee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 15.843141] ff00: 00000000 00000000 7fffffff 00000000 b6bb0f00 00000011 0000017b c0307f84 [ 15.851310] ff20: ee7de000 000000a0 00c358b0 c03d5b40 7fffffff 00000000 00000003 00000000 [ 15.859481] ff40: 42b5f840 f0bb6000 00001d23 00000000 f0bb67bf f0bb6000 00001a28 f0bb7550 [ 15.867650] ff60: f0bb7414 f0bb7090 00003000 000031b0 00000000 00000000 00000001 000018a8 [ 15.875820] ff80: 0000001b 0000001c 00000018 00000000 00000012 00000000 00000000 00000000 [ 15.883989] ffa0: 407aac00 c0307f5c 00000000 00000000 00000011 b6bb0f00 00000000 00000002 [ 15.892159] ffc0: 00000000 00000000 407aac00 0000017b 00c45d80 bea799b0 00000000 00c358b0 [ 15.900329] ffe0: bea798e0 bea798d0 b6ba8350 b6ebb410 600d0010 00000011 ffffffff ffffffff [ 15.908586] [<c0814e04>] (phy_attached_print) from [<bf1ae408>] (stmmac_mdio_register+0x190/0x1f8 [stmmac]) [ 15.918412] [<bf1ae408>] (stmmac_mdio_register [stmmac]) from [<bf1a9b88>] (stmmac_dvr_probe+0x76c/0x904 [stmmac]) [ 15.928797] [<bf1a9b88>] (stmmac_dvr_probe [stmmac]) from [<bf1d32bc>] (sun7i_gmac_probe+0x128/0x170 [dwmac_sunxi]) [ 15.939237] [<bf1d32bc>] (sun7i_gmac_probe [dwmac_sunxi]) from [<c0799384>] (platform_drv_probe+0x58/0xa4) [ 15.948886] [<c0799384>] (platform_drv_probe) from [<c07975ac>] (driver_probe_device+0x28c/0x424) [ 15.957752] [<c07975ac>] (driver_probe_device) from [<c07977cc>] (__driver_attach+0x88/0xf8) [ 15.966183] [<c07977cc>] (__driver_attach) from [<c0795784>] (bus_for_each_dev+0x84/0x94) [ 15.974356] [<c0795784>] (bus_for_each_dev) from [<c07969dc>] (bus_add_driver+0x1bc/0x23c) [ 15.982615] [<c07969dc>] (bus_add_driver) from [<c07983c4>] (driver_register+0xa8/0xe8) [ 15.990615] [<c07983c4>] (driver_register) from [<c0301d84>] (do_one_initcall+0x12c/0x154) [ 15.998879] [<c0301d84>] (do_one_initcall) from [<c03d6118>] (do_init_module+0x60/0x1d8) [ 16.006967] [<c03d6118>] (do_init_module) from [<c03d5864>] (load_module+0x2190/0x2230) [ 16.014966] [<c03d5864>] (load_module) from [<c03d5b40>] (SyS_finit_module+0xb0/0xc4) [ 16.022794] [<c03d5b40>] (SyS_finit_module) from [<c0307f5c>] (__sys_trace_return+0x0/0x10) [ 16.031142] Code: e59d401c e59031e0 e3540000 e590125c (e5932048) [ 16.037425] ---[ end trace 0a3ac5889ccd6f74 ]--- [ 16.046891] mmcblk0: p1 p2 p3 p4 [ OK ] Found device /dev/disk/by-uuid/114d550e-4d5f-45f5-972f-831ab919f613. [ OK ] Reached target Initrd Root Device. [ 134.884176] audit: type=1130 audit(1499868195.663:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ OK ] Started dracut initqueue hook. Starting dracut pre-mount hook... [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. [ 135.028187] audit: type=1130 audit(1499868195.806:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-mount comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ OK ] Started dracut pre-mount hook. Starting File System Check on /dev/…50e-4d5f-45f5-972f-831ab919f613... [ OK ] Started File System Check on /dev/d…d550e-[ 135.193481] audit: type=1130 audit(1499868195.973:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' 4d5f-45f5-972f-831ab919f613. Mounting /sysroot... [ 135.436519] SGI XFS with ACLs, security attributes, no debug enabled [ 135.459928] XFS (mmcblk0p4): Mounting V5 Filesystem [ 135.756398] XFS (mmcblk0p4): Ending clean mount [ OK ] Mounted /sysroot. [ OK ] Reached target Initrd Root File System. Starting Reload Configuration from the Real Root... [ 136.583722] audit: type=1130 audit(1499868197.363:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ OK ] Started Reload Configuration from the Real R[ 136.604651] audit: type=1131 audit(1499868197.384:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' oot. [ OK ] Reached target Initrd File Systems. [ OK ] Reached target Initrd Default Target. Starting dracut pre-pivot and cleanup hook... [ 167.339380] audit: type=1130 audit(1499868228.117:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ OK ] Started dracut pre-pivot and cleanup hook. Starting Cleaning Up and Shutting Down Daemons... Starting Setup Virtual Console... [ OK [ 167.427994] audit: type=1131 audit(1499868228.208:22): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' ] Stopped dracut pre-pivot and cleanup hook. [ OK ] Stopped target Remote File Systems. [ OK ] Stopped target Timers. Starting Plymouth switch root service... [ OK ] Stopped target Remote File Systems (Pre). [ OK ] Stopped dracut pre-mount hook. [ 167.476233] audit: type=1130 audit(1499868228.255:23): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-mount comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 167.499179] audit: type=1131 audit(1499868228.255:24): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-mount comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 167.519538] audit: type=1130 audit(1499868228.279:25): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 167.519565] audit: type=1131 audit(1499868228.280:26): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Stopping Open-iSCSI... [ OK ] Stopped target Initrd Default Target. [[ 167.590142] audit: type=1130 audit(1499868228.370:27): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [0;32m OK ] Stopped target Initrd Root Device. [ [ 167.611867] audit: type=1131 audit(1499868228.381:28): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' OK ] Stopped target Basic System. [ OK ] St[ 167.636988] audit: type=1130 audit(1499868228.392:29): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' opped target Paths. [ OK ] Stopped target Sockets[ 167.663206] audit: type=1131 audit(1499868228.392:30): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' . [ OK ] Closed Open-iSCSI iscsiuio Socket. [ OK ] Stopped target Slices. [ OK ] Stopped target System Initialization. [ OK ] Stopped target Swap. [ OK ] Stopped target Encrypted Volumes. [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped Create Volatile Files and Directories. [ OK ] Stopped target Local File Systems. [ OK ] Stopped udev Coldplug all Devices. [ OK ] Stopped dracut pre-trigger hook. Stopping udev Kernel Device Manager... [ OK ] Started Setup Virtual Console. [ OK ] Started Plymouth switch root service. [ OK ] Stopped Open-iSCSI. [ OK ] Started Cleaning Up and Shutting Down Daemons. [ 195.383975] kauditd_printk_skb: 12 callbacks suppressed [ 195.389328] audit: type=1701 audit(1499868256.164:43): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=338 comm="systemd-udevd" exe="/usr/lib/systemd/systemd-udevd" sig=11 res=1 [ 195.391234] Core dump to |/usr/lib/systemd/systemd-coredump 338 0 0 11 1499868256 4294967295 systemd-udevd pipe failed [ OK ] Stopped udev Kernel Device Manager. [ OK ] Stopped dracut pre-udev hook. [ 285.634249] audit: type=1130 audit(1499868346.408:44): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed' [ 285.658423] audit: type=1130 audit(1499868346.411:45): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 285.678379] audit: type=1131 audit(1499868346.412:46): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' I can grab that core dump if that would help. Current status is I cannot run F27 minimal server on my Cubieboard2. I DID try and download the Xfce workstation today, but the download kept failing right at the end. I will try tomorrow once there is a new image. Bob

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

arm September 2017