arm February 2017

arm@lists.fedoraproject.org

23 participants
28 discussions

constant kernel panics on 4.9.6-200.fc25.armv7hl
by Leo Green 07 Feb '17

07 Feb '17

Hello, I get constant kernel panics on multiple RPi3's with panics like below: http://pastebin.com/41MDeinG Not sure how to get you guys more/better information since kdump doesn't appear to work on these. Please let me know if/how i can get you more/better information -- Sent from my Western Electric Model 500.

1 0

armv7 virtual machine boot?
by Gerd Hoffmann 06 Feb '17

06 Feb '17

Hi, Where do we stand in terms of armv7 virtual machine boot loaders? armv8 just works very nicely, thanks to efi and grub2. armv7 has efi firmware too, but fedora seems not not want go that route. Last time I asked people didn't want make virtual machines boot different (efi+grub2) than all those armv7 boards (u-boot). So, do we have some reasonable solution to boot armv7 vms in fedora? Without having to copy the kernel from the disk, as the fedora wiki suggests, b/c that makes kernel updates a PITA? And preferably something which works with virtio storage instead of slow sdcard emulation? What are all the koji builders doing which are (or will be?) moved to armv7 guests on armv8 hosts? thanks, Gerd

1 0

Possible Hangups on Raspberry Pi with FC25 Server
by petrenz.a＠gmail.com 06 Feb '17

06 Feb '17

Hello, I recently bought a Raspberry Pi and I want to use it as a small server. I installed FC25 on it. The only additional piece of hardware is a bluetooth keyboard/mouse device, which is connected via usb dongle. On the software side I only installed a samba server and opened the related ports with a firewall command. This installation is working and I can access the shared folder. However after a while - it differs - the server isn't available anymore. No ping is possible, also there is no HDMI signal anymore - the only thing I can do is restart it. I'm keeping the software up to date, but that doesn't solve the problem. So what I would like to ask is, if there are known stability issues? Or is there something I can check and maybe fix? Maybe I could provide some details (not sure what - log doesn't tell anything usefull) to track down any issue. Best Regards Alex

6 11

[Fedocal] Reminder meeting : Fedora ARM & AArch64 status meeting
by pwhalen＠redhat.com 05 Feb '17

05 Feb '17

Dear all, You are kindly invited to the meeting: Fedora ARM & AArch64 status meeting on 2017-02-07 from 16:00:00 to 17:00:00 UTC At fedora-meeting-2(a)irc.freenode.net The meeting will be about: Fedora ARM & AArch64 weekly status meeting. More information available at: [https://fedoraproject.org/wiki/Architectures/ARM](https://fedoraproject.org… Source: https://apps.fedoraproject.org/calendar/meeting/5170/

1 0

Fedora Server image - where is newaliases
by Robert Moskowitz 05 Feb '17

05 Feb '17

I am building a Fedora Server image. As such, I am modifying the /etc/aliases file and need to run newaliases. I am use to that always being part of a Centos base image, it is not in the Fedora Server base image, it seems. I tried 'dnf whatprovides newaliases' and got 'No Matches Found'. But then my search foo is notoriously weak. Can someone please point me to the proper rpm to install so that I it? thanks

4 5

Fedora-Server-armhfp-25-1.3-sda - httpd userdir and selinux probem
by Robert Moskowitz 04 Feb '17

04 Feb '17

I did all of my steps to build a Fedora Server with updates and installed httpd. I edited the /etc/httpd/conf.d/userdir.conf to enable userdir. I kept all of the rest of this conf file unchanged. I added my z00-init.conf file: ServerAdmin rgm(a)htt-consult.com ServerName medon.htt-consult.com:80 # NameVirtualHost *:80 # NameVirtualHost *:443 I followed the permission instructions in the userdir.conf file, copied some files into my public_html set my IP addr and all the rest, put the Cubie on my DMZ and tried to access a file: http://medon.htt-consult.com/~rgm/cubieboard/cubietower-2.JPG This works. You can try this also, as the server is public. But I cannot access just a directory: http://medon.htt-consult.com/~rgm/cubieboard/ I get: ===== Forbidden You don't have permission to access /~rgm/cubieboard/ on this server. ===== If I disable SELinux with 'setenforce 0' I get the listing of files in this directory. The userdir.conf default is: <Directory "/home/*/public_html"> AllowOverride FileInfo AuthConfig Limit Indexes Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec Require method GET POST OPTIONS </Directory> So this should work. /var/log/httpd/error.log reports: [Sat Feb 04 23:24:13.289963 2017] [negotiation:error] [pid 865] (13)Permission denied: [client 192.168.160.12:56918] AH00686: cannot read directory for multi: /home/rgm/public_html/cubieboard/ permissions are: # ls -ls /home/rgm/public_html/ total 4 0 drwxrwxr-x. 2 rgm rgm 54 Feb 4 22:51 cubieboard 0 drwxrwxr-x. 2 rgm rgm 203 Feb 4 22:51 Harpsichord 0 drwxrwxr-x. 2 rgm rgm 73 Feb 4 22:51 ietf 4 -rw-rw-r--. 1 rgm rgm 12 Jan 21 2013 index.html # ls -ls /home/rgm/public_html/cubieboard/ total 3504 1420 -rw-rw-r--. 1 rgm rgm 1450256 Aug 27 2014 cubietower-2.JPG 2084 -rw-r--r--. 1 rgm rgm 2131328 Sep 4 2014 cubietower-3.JPG Why did I suspect SELinux you ask? Well I get all these warnings when I do any SELinux command. What follows is everything I could gather from the console. So please tell me what is the problem and how to fix it. I really want to get this simple server up and in production already... Upgrading : selinux-policy-targeted-3.13.1-225.6.fc25.noarch 310/844 [ 8981.136506] SELinux: Permission validate_trans in class security not defined in policy. [ 8981.144734] SELinux: Permission module_load in class system not defined in policy. [ 8981.152998] SELinux: the above unknown classes and permissions will be allowed [ 8985.835670] SELinux: Context unconfined_u:unconfined_r:sandbox_t:s0-s0:c0.c1023 became invalid (unmapped). [ 8987.072186] SELinux: Context system_u:unconfined_r:sandbox_t:s0-s0:c0.c1023 became invalid (unmapped). /var/lib/selinux/targeted/active/policy.kern: read error (tried to read 8192 bytes from offset 3848760) cannot reconstruct rpm from disk files [ 0.006234] SELinux: Initializing. [ 6.113236] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 17.446033] SELinux: Permission validate_trans in class security not defined in policy. [ 17.454298] SELinux: Permission module_load in class system not defined in policy. [ 17.462557] SELinux: the above unknown classes and permissions will be allowed [ 17.544762] systemd[1]: Successfully loaded SELinux policy in 910.703ms. Upgrading : container-selinux-2:2.5-1.fc25.noarch 179/500 [11840.708423] SELinux: Permission validate_trans in class security not defined in policy. [11840.716674] SELinux: Permission module_load in class system not defined in policy. [11840.725023] SELinux: the above unknown classes and permissions will be allowed [11841.999564] SELinux: Context system_u:system_r:gear_t:s0-s0:c0.c1023 became invalid (unmapped). [11847.589662] SELinux: Context unconfined_u:system_r:gear_t:s0-s0:c0.c1023 became invalid (unmapped). libsemanage.semanage_direct_remove_key: Removing last container module (no other container module exists at another priority). # semanage port -a -t ssh_port_t -p tcp 1234 /* not the real port number [116454.082753] SELinux: Permission validate_trans in class security not defined in policy. [116454.091093] SELinux: Permission module_load in class system not defined in policy. [116454.099465] SELinux: the above unknown classes and permissions will be allowed # setsebool -P httpd_enable_homedirs on [120049.339391] SELinux: Permission validate_trans in class security not defined in policy. [120049.347700] SELinux: Permission module_load in class system not defined in policy. [120049.356072] SELinux: the above unknown classes and permissions will be allowed thanks

1 2

Fedora-Server-armhfp-25-1.3-sda - partition resize problem
by Robert Moskowitz 04 Feb '17

04 Feb '17

When I created the server image, I used the --resizefs option. This seemed to work. But I put the mSD card into my notebook to copy all of my files for the web server, and I am seeing only: # df -h Filesystem Size Used Avail Use% Mounted on .... /dev/sdc4 2.8G 1.8G 1.1G 63% /run/media/rgm/__ but parted says: # parted /dev/sdc print Model: Generic- SD/MMC (scsi) Disk /dev/sdc: 15.5GB Sector size (logical/physical): 512B/512B Partition Table: msdos Disk Flags: Number Start End Size Type File system Flags 1 1049kB 31.5MB 30.4MB primary fat16 lba 2 31.5MB 543MB 512MB primary ext4 boot 3 543MB 1055MB 512MB primary linux-swap(v1) 4 1055MB 15.5GB 14.5GB primary xfs gparted information on the partition reports: 10.69 GiB of unallocated space within the partition. To grow the file system to fill the partition, select the partition and choose the menu item: Partition --> Check. For now all I am going to do is copy a few files until I get direction here on how to fix this.

1 1

Fedora-Xfce-armhfp-Rawhide-20170119.n.0-sda.raw.xz problems on CubieTruck
by Robert Moskowitz 01 Feb '17

01 Feb '17

I build a CubieTruck image using the installer script with the following options: --target=Cubietruck --media=/dev/sdb --norootpass --selinux=OFF --addconsole --resizefs I booted up the image with a UDB keyboard and VGA monitor attached plus the TTY console. After I logged into the console as root, I set the root password, and added myself as a user. I then used this userID to log into the Xfce login. Next I did 'dnf update' Of course this took time to run. But a VERY long time between the cleanup and verify phases. During these I got the message: Image Name: 4.10.0-0.rc5.git0.1.fc26.armv7hl Created: Wed Jan 25 10:04:59 2017 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 6054568 Bytes = 5912.66 kB = 5.77 MB Load Address: 00008000 Entry Point: 00008000 Image Name: initramfs Created: Wed Jan 25 10:05:01 2017 Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 16525173 Bytes = 16137.86 kB = 15.76 MB Load Address: 00000000 Entry Point: 00000000 dracut: Disabling early microcode, because kernel does not support it. CONFIG_MICROCODE_[AMD|INTEL]!=y eventually the update finished. The system SEEMS to be working, but what is with this message? thank you

3 4

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

arm February 2017