I have a wandboard quad, and would like to mount a sata root FS at boot time. kwizart helped me to get sata support when booting by doing the following:
--- instructions from kwizart --- cat>/etc/modules-load.d/imx.conf<<EOF # Load ahci imx at boot ahci_platform ahci_imx EOF
dracut -H /boot/initramfs-$(uname -r).img $(uname -r) mkimage -A arm -O linux -T ramdisk -C none -n $(uname -r) -d /boot/initramfs-$(uname -r).img /boot/uInitrd-$(uname -r) --- end instructions ---
I indeed see that sata works at the first login prompt. However, I cannot mount the rootFS on sata, as apparently the fs mounting is done before the initialization of the AHCI (sata) subsystem. The following console output is when booting and mounting the rootFS on uSD card:
---- console output ---- Jan 1 01:00:17 localhost kernel: [ 0.000000] Booting Linux on physical CPU 0x0 Jan 1 01:00:17 localhost kernel: [ 0.000000] Initializing cgroup subsys cpuset Jan 1 01:00:17 localhost kernel: [ 0.000000] Initializing cgroup subsys cpu Jan 1 01:00:17 localhost kernel: [ 0.000000] Initializing cgroup subsys cpuacct Jan 1 01:00:17 localhost kernel: [ 0.000000] Linux version 3.12.1-2.fc21.armv7hl (mockbuild@arm02-builder12.arm.fedoraproject.org) (gcc version 4.8.2 20131111 (Red Hat 4.8.2-4) (GCC) ) #1 SMP Thu Nov 21 05:58:27 UTC 2013 Jan 1 01:00:17 localhost kernel: [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d Jan 1 01:00:17 localhost kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Jan 1 01:00:17 localhost kernel: [ 0.000000] Machine: Freescale i.MX6 Quad/DualLite (Device Tree), model: Wandboard i.MX6 Quad Board Jan 1 01:00:17 localhost kernel: [ 0.000000] cma: CMA: reserved 16 MiB at 3e800000 Jan 1 01:00:17 localhost kernel: [ 0.000000] Memory policy: ECC disabled, Data cache writealloc Jan 1 01:00:17 localhost kernel: [ 0.000000] PERCPU: Embedded 9 pages/cpu @c2222000 s13568 r8192 d15104 u36864 Jan 1 01:00:17 localhost kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 Jan 1 01:00:17 localhost kernel: [ 0.000000] Kernel command line: console=ttymxc0,115200 root=UUID=fe1515c1-3a1d-4904-98e5-ba61cc7f013d ro rhgb LANG=en_US.UTF-8 selinux=0 ------ skip uninteresting stuff here ----- Jan 1 01:00:17 localhost kernel: [ 4.062420] mmc2: new high speed SDHC card at address 0007 Jan 1 01:00:17 localhost kernel: [ 4.068525] mmcblk0: mmc2:0007 SD8GB 7.21 GiB Jan 1 01:00:17 localhost kernel: [ 4.074729] mmcblk0: p1 p2 p3 Jan 1 01:00:17 localhost kernel: [ 4.451255] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) Jan 1 01:00:17 localhost kernel: [ 7.245130] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Jan 1 01:00:17 localhost kernel: [ 7.573281] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) Jan 1 01:00:17 localhost kernel: [ 8.040711] ahci ahci: SSS flag set, parallel bus scan disabled Jan 1 01:00:17 localhost kernel: [ 8.046826] ahci ahci: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode Jan 1 01:00:17 localhost kernel: [ 8.054716] ahci ahci: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jan 1 01:00:17 localhost kernel: [ 8.065987] scsi0 : ahci_platform Jan 1 01:00:17 localhost kernel: [ 8.069805] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 71 Jan 1 01:00:17 localhost kernel: [ 8.133208] imx-sdma 20ec000.sdma: firmware not found Jan 1 01:00:17 localhost kernel: [ 8.142883] imx-sdma 20ec000.sdma: initialized Jan 1 01:00:17 localhost kernel: [ 8.173272] ci_hdrc ci_hdrc.0: doesn't support gadget Jan 1 01:00:17 localhost kernel: [ 8.179507] ci_hdrc ci_hdrc.0: EHCI Host Controller Jan 1 01:00:17 localhost rsyslogd: [origin software="rsyslogd" swVersion="7.4.2" x-pid="353" x-info="http://www.rsyslog.com"] start Jan 1 01:00:17 localhost kernel: [ 8.184987] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 Jan 1 01:00:17 localhost kernel: [ 8.209086] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 Jan 1 01:00:17 localhost kernel: [ 8.215557] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Jan 1 01:00:17 localhost kernel: [ 8.222495] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jan 1 01:00:17 localhost kernel: [ 8.229801] usb usb1: Product: EHCI Host Controller Jan 1 01:00:17 localhost kernel: [ 8.234760] usb usb1: Manufacturer: Linux 3.12.1-2.fc21.armv7hl ehci_hcd Jan 1 01:00:17 localhost kernel: [ 8.241547] usb usb1: SerialNumber: ci_hdrc.0 Jan 1 01:00:17 localhost kernel: [ 8.249815] hub 1-0:1.0: USB hub found Jan 1 01:00:17 localhost kernel: [ 8.254717] hub 1-0:1.0: 1 port detected Jan 1 01:00:17 localhost kernel: [ 8.336178] imx-sgtl5000 sound.13: failed to find codec platform device Jan 1 01:00:17 localhost kernel: [ 8.342881] platform sound.13: Driver imx-sgtl5000 requests probe deferral Jan 1 01:00:17 localhost kernel: [ 8.458135] pps_core: LinuxPPS API ver. 1 registered Jan 1 01:00:17 localhost kernel: [ 8.463240] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it Jan 1 01:00:17 localhost kernel: [ 8.467510] imx_ipu_v3: module is from the staging directory, the quality is unknown, you have been warned. Jan 1 01:00:17 localhost kernel: [ 8.472546] imx-ipuv3 2400000.ipu: IPUv3H probed Jan 1 01:00:17 localhost kernel: [ 8.473071] imx-sgtl5000 sound.13: failed to find codec platform device Jan 1 01:00:17 localhost kernel: [ 8.473087] platform sound.13: Driver imx-sgtl5000 requests probe deferral Jan 1 01:00:17 localhost kernel: [ 8.473891] imx-ipuv3 2800000.ipu: IPUv3H probed Jan 1 01:00:17 localhost kernel: [ 8.474362] imx-sgtl5000 sound.13: failed to find codec platform device Jan 1 01:00:17 localhost kernel: [ 8.474378] platform sound.13: Driver imx-sgtl5000 requests probe deferral Jan 1 01:00:17 localhost kernel: [ 8.483185] imx_ipu_v3: module is from the staging directory, the quality is unknown, you have been warned. Jan 1 01:00:17 localhost kernel: [ 8.536977] [drm] Initialized drm 1.1.0 20060810 Jan 1 01:00:17 localhost kernel: [ 8.547867] PTP clock support registered Jan 1 01:00:17 localhost kernel: [ 8.592222] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jan 1 01:00:17 localhost kernel: [ 8.599992] ata1.00: ATA-7: ST9100821AS, 3.CMC, max UDMA/100 Jan 1 01:00:17 localhost kernel: [ 8.605699] ata1.00: 195371568 sectors, multi 0: LBA48 NCQ (depth 31/32) Jan 1 01:00:17 localhost kernel: [ 8.624052] imx-sgtl5000 sound.13: failed to find codec platform device Jan 1 01:00:17 localhost kernel: [ 8.626277] libphy: fec_enet_mii_bus: probed Jan 1 01:00:17 localhost kernel: [ 8.626967] fec 2188000.ethernet eth0: registered PHC device 0 Jan 1 01:00:17 localhost kernel: [ 8.643241] platform sound.13: Driver imx-sgtl5000 requests probe deferral Jan 1 01:00:17 localhost kernel: [ 8.662792] imxdrm: module is from the staging directory, the quality is unknown, you have been warned. Jan 1 01:00:17 localhost kernel: [ 8.662800] imxdrm: module is from the staging directory, the quality is unknown, you have been warned. Jan 1 01:00:17 localhost kernel: [ 8.662834] imxdrm: module is from the staging directory, the quality is unknown, you have been warned. Jan 1 01:00:17 localhost kernel: [ 8.664912] cfg80211: Calling CRDA to update world regulatory domain Jan 1 01:00:17 localhost kernel: [ 8.668998] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). Jan 1 01:00:17 localhost kernel: [ 8.669002] [drm] No driver support for vblank timestamp query. Jan 1 01:00:17 localhost kernel: [ 8.669015] [drm] Initialized imx-drm 1.0.0 20120507 on minor 0 Jan 1 01:00:17 localhost kernel: [ 8.669626] imx-sgtl5000 sound.13: failed to find codec platform device Jan 1 01:00:17 localhost kernel: [ 8.669645] platform sound.13: Driver imx-sgtl5000 requests probe deferral Jan 1 01:00:17 localhost kernel: [ 8.675308] imxdrm: module is from the staging directory, the quality is unknown, you have been warned. Jan 1 01:00:17 localhost kernel: [ 8.712414] ipuv3_crtc: module is from the staging directory, the quality is unknown, you have been warned. Jan 1 01:00:17 localhost kernel: [ 8.712420] ipuv3_crtc: module is from the staging directory, the quality is unknown, you have been warned. Jan 1 01:00:17 localhost kernel: [ 8.713329] ipuv3_crtc: module is from the staging directory, the quality is unknown, you have been warned. Jan 1 01:00:17 localhost kernel: [ 8.714454] imx-sgtl5000 sound.13: failed to find codec platform device Jan 1 01:00:17 localhost kernel: [ 8.714472] platform sound.13: Driver imx-sgtl5000 requests probe deferral Jan 1 01:00:17 localhost kernel: [ 8.714950] imx-sgtl5000 sound.13: failed to find codec platform device Jan 1 01:00:17 localhost kernel: [ 8.714965] platform sound.13: Driver imx-sgtl5000 requests probe deferral Jan 1 01:00:17 localhost kernel: [ 8.748753] imx-sgtl5000 sound.13: failed to find codec platform device Jan 1 01:00:17 localhost kernel: [ 8.748771] platform sound.13: Driver imx-sgtl5000 requests probe deferral Jan 1 01:00:17 localhost kernel: [ 8.750975] brcmfmac: brcmf_sdio_chip_drivestrengthinit: No SDIO Drive strength init done for chip 4329 rev 3 pmurev 6 Jan 1 01:00:17 localhost kernel: [ 8.797409] ata1.00: configured for UDMA/100 Jan 1 01:00:17 localhost kernel: [ 8.797902] scsi 0:0:0:0: Direct-Access ATA ST9100821AS 3.CM PQ: 0 ANSI: 5 Jan 1 01:00:17 localhost kernel: [ 8.798935] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) Jan 1 01:00:17 localhost kernel: [ 8.798975] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jan 1 01:00:17 localhost kernel: [ 8.799374] sd 0:0:0:0: [sda] Write Protect is off Jan 1 01:00:17 localhost kernel: [ 8.799528] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jan 1 01:00:17 localhost kernel: [ 8.799825] imx-sgtl5000 sound.13: failed to find codec platform device Jan 1 01:00:17 localhost kernel: [ 8.799844] platform sound.13: Driver imx-sgtl5000 requests probe deferral Jan 1 01:00:17 localhost kernel: [ 8.806051] brcmfmac: brcmf_sdbrcm_download_code_file: Fail to request firmware -2 Jan 1 01:00:17 localhost kernel: [ 8.806058] brcmfmac: _brcmf_sdbrcm_download_firmware: dongle image file download failed Jan 1 01:00:17 localhost kernel: [ 8.806119] brcmfmac: brcmf_bus_start: brcmf_sdbrcm_bus_init failed -1 Jan 1 01:00:17 localhost kernel: [ 8.806127] brcmfmac: brcmf_sdbrcm_probe: dongle is not responding Jan 1 01:00:17 localhost kernel: [ 8.807864] brcmfmac: brcmf_sdio_probe: device attach failed Jan 1 01:00:17 localhost kernel: [ 8.808011] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe failed -19... Jan 1 01:00:17 localhost kernel: [ 8.808487] usbcore: registered new interface driver brcmfmac Jan 1 01:00:17 localhost kernel: [ 8.826448] Bluetooth: Core ver 2.16 Jan 1 01:00:17 localhost kernel: [ 8.826544] NET: Registered protocol family 31 Jan 1 01:00:17 localhost kernel: [ 8.826548] Bluetooth: HCI device and connection manager initialized Jan 1 01:00:17 localhost kernel: [ 8.826577] Bluetooth: HCI socket layer initialized Jan 1 01:00:17 localhost kernel: [ 8.826587] Bluetooth: L2CAP socket layer initialized Jan 1 01:00:17 localhost kernel: [ 8.826614] Bluetooth: SCO socket layer initialized Jan 1 01:00:17 localhost kernel: [ 8.835564] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 Jan 1 01:00:17 localhost kernel: [ 8.837531] imx-sgtl5000 sound.13: failed to find codec platform device Jan 1 01:00:17 localhost kernel: [ 8.837549] platform sound.13: Driver imx-sgtl5000 requests probe deferral Jan 1 01:00:17 localhost kernel: [ 8.950459] sda: sda1 sda2 sda3 ------- cut here ---------
mmcblk0p3 has the root file system on uSD card, mounted at [ 4.451255]. Much later, only at [ 8.592222], the sata link is up.
If I try to mount /dev/sda1 for the root fs (in the kernel command line), I get a panic kernel after a 90 second timeout....
Can someone help me to get ahci initialized before the root fs is mounted?
Cheers, Ronald
PS the wandquad can be seen here, btw: http://www.swissdutch.ch:4999/
On Fri, Nov 29, 2013 at 04:19:03PM +0100, Ronald wrote:
I have a wandboard quad, and would like to mount a sata root FS at boot time. kwizart helped me to get sata support when booting by doing the following:
--- instructions from kwizart --- cat>/etc/modules-load.d/imx.conf<<EOF # Load ahci imx at boot ahci_platform ahci_imx EOF
dracut -H /boot/initramfs-$(uname -r).img $(uname -r) mkimage -A arm -O linux -T ramdisk -C none -n $(uname -r) -d /boot/initramfs-$(uname -r).img /boot/uInitrd-$(uname -r) --- end instructions ---
I indeed see that sata works at the first login prompt. However, I cannot mount the rootFS on sata, as apparently the fs mounting is done before the initialization of the AHCI (sata) subsystem. The following console output is when booting and mounting the rootFS on uSD card:
Maybe you should create a file like this before generating the initramfs.img:
echo 'add_device+=/dev/sda' > /etc/dracut.d/wait-for-sda.conf
If I understand 'man 5 dracut.conf' correctly, this causes the initramfs to wait until /dev/sda is available.
HTH, Niels
---- console output ---- Jan 1 01:00:17 localhost kernel: [ 0.000000] Booting Linux on physical CPU 0x0 Jan 1 01:00:17 localhost kernel: [ 0.000000] Initializing cgroup subsys cpuset Jan 1 01:00:17 localhost kernel: [ 0.000000] Initializing cgroup subsys cpu Jan 1 01:00:17 localhost kernel: [ 0.000000] Initializing cgroup subsys cpuacct Jan 1 01:00:17 localhost kernel: [ 0.000000] Linux version 3.12.1-2.fc21.armv7hl (mockbuild@arm02-builder12.arm.fedoraproject.org) (gcc version 4.8.2 20131111 (Red Hat 4.8.2-4) (GCC) ) #1 SMP Thu Nov 21 05:58:27 UTC 2013 Jan 1 01:00:17 localhost kernel: [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d Jan 1 01:00:17 localhost kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Jan 1 01:00:17 localhost kernel: [ 0.000000] Machine: Freescale i.MX6 Quad/DualLite (Device Tree), model: Wandboard i.MX6 Quad Board Jan 1 01:00:17 localhost kernel: [ 0.000000] cma: CMA: reserved 16 MiB at 3e800000 Jan 1 01:00:17 localhost kernel: [ 0.000000] Memory policy: ECC disabled, Data cache writealloc Jan 1 01:00:17 localhost kernel: [ 0.000000] PERCPU: Embedded 9 pages/cpu @c2222000 s13568 r8192 d15104 u36864 Jan 1 01:00:17 localhost kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 Jan 1 01:00:17 localhost kernel: [ 0.000000] Kernel command line: console=ttymxc0,115200 root=UUID=fe1515c1-3a1d-4904-98e5-ba61cc7f013d ro rhgb LANG=en_US.UTF-8 selinux=0 ------ skip uninteresting stuff here ----- Jan 1 01:00:17 localhost kernel: [ 4.062420] mmc2: new high speed SDHC card at address 0007 Jan 1 01:00:17 localhost kernel: [ 4.068525] mmcblk0: mmc2:0007 SD8GB 7.21 GiB Jan 1 01:00:17 localhost kernel: [ 4.074729] mmcblk0: p1 p2 p3 Jan 1 01:00:17 localhost kernel: [ 4.451255] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) Jan 1 01:00:17 localhost kernel: [ 7.245130] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Jan 1 01:00:17 localhost kernel: [ 7.573281] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) Jan 1 01:00:17 localhost kernel: [ 8.040711] ahci ahci: SSS flag set, parallel bus scan disabled Jan 1 01:00:17 localhost kernel: [ 8.046826] ahci ahci: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode Jan 1 01:00:17 localhost kernel: [ 8.054716] ahci ahci: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jan 1 01:00:17 localhost kernel: [ 8.065987] scsi0 : ahci_platform Jan 1 01:00:17 localhost kernel: [ 8.069805] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 71 Jan 1 01:00:17 localhost kernel: [ 8.133208] imx-sdma 20ec000.sdma: firmware not found Jan 1 01:00:17 localhost kernel: [ 8.142883] imx-sdma 20ec000.sdma: initialized Jan 1 01:00:17 localhost kernel: [ 8.173272] ci_hdrc ci_hdrc.0: doesn't support gadget Jan 1 01:00:17 localhost kernel: [ 8.179507] ci_hdrc ci_hdrc.0: EHCI Host Controller Jan 1 01:00:17 localhost rsyslogd: [origin software="rsyslogd" swVersion="7.4.2" x-pid="353" x-info="http://www.rsyslog.com"] start Jan 1 01:00:17 localhost kernel: [ 8.184987] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 Jan 1 01:00:17 localhost kernel: [ 8.209086] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 Jan 1 01:00:17 localhost kernel: [ 8.215557] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Jan 1 01:00:17 localhost kernel: [ 8.222495] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jan 1 01:00:17 localhost kernel: [ 8.229801] usb usb1: Product: EHCI Host Controller Jan 1 01:00:17 localhost kernel: [ 8.234760] usb usb1: Manufacturer: Linux 3.12.1-2.fc21.armv7hl ehci_hcd Jan 1 01:00:17 localhost kernel: [ 8.241547] usb usb1: SerialNumber: ci_hdrc.0 Jan 1 01:00:17 localhost kernel: [ 8.249815] hub 1-0:1.0: USB hub found Jan 1 01:00:17 localhost kernel: [ 8.254717] hub 1-0:1.0: 1 port detected Jan 1 01:00:17 localhost kernel: [ 8.336178] imx-sgtl5000 sound.13: failed to find codec platform device Jan 1 01:00:17 localhost kernel: [ 8.342881] platform sound.13: Driver imx-sgtl5000 requests probe deferral Jan 1 01:00:17 localhost kernel: [ 8.458135] pps_core: LinuxPPS API ver. 1 registered Jan 1 01:00:17 localhost kernel: [ 8.463240] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it Jan 1 01:00:17 localhost kernel: [ 8.467510] imx_ipu_v3: module is from the staging directory, the quality is unknown, you have been warned. Jan 1 01:00:17 localhost kernel: [ 8.472546] imx-ipuv3 2400000.ipu: IPUv3H probed Jan 1 01:00:17 localhost kernel: [ 8.473071] imx-sgtl5000 sound.13: failed to find codec platform device Jan 1 01:00:17 localhost kernel: [ 8.473087] platform sound.13: Driver imx-sgtl5000 requests probe deferral Jan 1 01:00:17 localhost kernel: [ 8.473891] imx-ipuv3 2800000.ipu: IPUv3H probed Jan 1 01:00:17 localhost kernel: [ 8.474362] imx-sgtl5000 sound.13: failed to find codec platform device Jan 1 01:00:17 localhost kernel: [ 8.474378] platform sound.13: Driver imx-sgtl5000 requests probe deferral Jan 1 01:00:17 localhost kernel: [ 8.483185] imx_ipu_v3: module is from the staging directory, the quality is unknown, you have been warned. Jan 1 01:00:17 localhost kernel: [ 8.536977] [drm] Initialized drm 1.1.0 20060810 Jan 1 01:00:17 localhost kernel: [ 8.547867] PTP clock support registered Jan 1 01:00:17 localhost kernel: [ 8.592222] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jan 1 01:00:17 localhost kernel: [ 8.599992] ata1.00: ATA-7: ST9100821AS, 3.CMC, max UDMA/100 Jan 1 01:00:17 localhost kernel: [ 8.605699] ata1.00: 195371568 sectors, multi 0: LBA48 NCQ (depth 31/32) Jan 1 01:00:17 localhost kernel: [ 8.624052] imx-sgtl5000 sound.13: failed to find codec platform device Jan 1 01:00:17 localhost kernel: [ 8.626277] libphy: fec_enet_mii_bus: probed Jan 1 01:00:17 localhost kernel: [ 8.626967] fec 2188000.ethernet eth0: registered PHC device 0 Jan 1 01:00:17 localhost kernel: [ 8.643241] platform sound.13: Driver imx-sgtl5000 requests probe deferral Jan 1 01:00:17 localhost kernel: [ 8.662792] imxdrm: module is from the staging directory, the quality is unknown, you have been warned. Jan 1 01:00:17 localhost kernel: [ 8.662800] imxdrm: module is from the staging directory, the quality is unknown, you have been warned. Jan 1 01:00:17 localhost kernel: [ 8.662834] imxdrm: module is from the staging directory, the quality is unknown, you have been warned. Jan 1 01:00:17 localhost kernel: [ 8.664912] cfg80211: Calling CRDA to update world regulatory domain Jan 1 01:00:17 localhost kernel: [ 8.668998] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). Jan 1 01:00:17 localhost kernel: [ 8.669002] [drm] No driver support for vblank timestamp query. Jan 1 01:00:17 localhost kernel: [ 8.669015] [drm] Initialized imx-drm 1.0.0 20120507 on minor 0 Jan 1 01:00:17 localhost kernel: [ 8.669626] imx-sgtl5000 sound.13: failed to find codec platform device Jan 1 01:00:17 localhost kernel: [ 8.669645] platform sound.13: Driver imx-sgtl5000 requests probe deferral Jan 1 01:00:17 localhost kernel: [ 8.675308] imxdrm: module is from the staging directory, the quality is unknown, you have been warned. Jan 1 01:00:17 localhost kernel: [ 8.712414] ipuv3_crtc: module is from the staging directory, the quality is unknown, you have been warned. Jan 1 01:00:17 localhost kernel: [ 8.712420] ipuv3_crtc: module is from the staging directory, the quality is unknown, you have been warned. Jan 1 01:00:17 localhost kernel: [ 8.713329] ipuv3_crtc: module is from the staging directory, the quality is unknown, you have been warned. Jan 1 01:00:17 localhost kernel: [ 8.714454] imx-sgtl5000 sound.13: failed to find codec platform device Jan 1 01:00:17 localhost kernel: [ 8.714472] platform sound.13: Driver imx-sgtl5000 requests probe deferral Jan 1 01:00:17 localhost kernel: [ 8.714950] imx-sgtl5000 sound.13: failed to find codec platform device Jan 1 01:00:17 localhost kernel: [ 8.714965] platform sound.13: Driver imx-sgtl5000 requests probe deferral Jan 1 01:00:17 localhost kernel: [ 8.748753] imx-sgtl5000 sound.13: failed to find codec platform device Jan 1 01:00:17 localhost kernel: [ 8.748771] platform sound.13: Driver imx-sgtl5000 requests probe deferral Jan 1 01:00:17 localhost kernel: [ 8.750975] brcmfmac: brcmf_sdio_chip_drivestrengthinit: No SDIO Drive strength init done for chip 4329 rev 3 pmurev 6 Jan 1 01:00:17 localhost kernel: [ 8.797409] ata1.00: configured for UDMA/100 Jan 1 01:00:17 localhost kernel: [ 8.797902] scsi 0:0:0:0: Direct-Access ATA ST9100821AS 3.CM PQ: 0 ANSI: 5 Jan 1 01:00:17 localhost kernel: [ 8.798935] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) Jan 1 01:00:17 localhost kernel: [ 8.798975] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jan 1 01:00:17 localhost kernel: [ 8.799374] sd 0:0:0:0: [sda] Write Protect is off Jan 1 01:00:17 localhost kernel: [ 8.799528] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jan 1 01:00:17 localhost kernel: [ 8.799825] imx-sgtl5000 sound.13: failed to find codec platform device Jan 1 01:00:17 localhost kernel: [ 8.799844] platform sound.13: Driver imx-sgtl5000 requests probe deferral Jan 1 01:00:17 localhost kernel: [ 8.806051] brcmfmac: brcmf_sdbrcm_download_code_file: Fail to request firmware -2 Jan 1 01:00:17 localhost kernel: [ 8.806058] brcmfmac: _brcmf_sdbrcm_download_firmware: dongle image file download failed Jan 1 01:00:17 localhost kernel: [ 8.806119] brcmfmac: brcmf_bus_start: brcmf_sdbrcm_bus_init failed -1 Jan 1 01:00:17 localhost kernel: [ 8.806127] brcmfmac: brcmf_sdbrcm_probe: dongle is not responding Jan 1 01:00:17 localhost kernel: [ 8.807864] brcmfmac: brcmf_sdio_probe: device attach failed Jan 1 01:00:17 localhost kernel: [ 8.808011] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe failed -19... Jan 1 01:00:17 localhost kernel: [ 8.808487] usbcore: registered new interface driver brcmfmac Jan 1 01:00:17 localhost kernel: [ 8.826448] Bluetooth: Core ver 2.16 Jan 1 01:00:17 localhost kernel: [ 8.826544] NET: Registered protocol family 31 Jan 1 01:00:17 localhost kernel: [ 8.826548] Bluetooth: HCI device and connection manager initialized Jan 1 01:00:17 localhost kernel: [ 8.826577] Bluetooth: HCI socket layer initialized Jan 1 01:00:17 localhost kernel: [ 8.826587] Bluetooth: L2CAP socket layer initialized Jan 1 01:00:17 localhost kernel: [ 8.826614] Bluetooth: SCO socket layer initialized Jan 1 01:00:17 localhost kernel: [ 8.835564] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 Jan 1 01:00:17 localhost kernel: [ 8.837531] imx-sgtl5000 sound.13: failed to find codec platform device Jan 1 01:00:17 localhost kernel: [ 8.837549] platform sound.13: Driver imx-sgtl5000 requests probe deferral Jan 1 01:00:17 localhost kernel: [ 8.950459] sda: sda1 sda2 sda3 ------- cut here ---------
mmcblk0p3 has the root file system on uSD card, mounted at [ 4.451255]. Much later, only at [ 8.592222], the sata link is up.
If I try to mount /dev/sda1 for the root fs (in the kernel command line), I get a panic kernel after a 90 second timeout....
Can someone help me to get ahci initialized before the root fs is mounted?
Cheers, Ronald
PS the wandquad can be seen here, btw: http://www.swissdutch.ch:4999/
arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm
On Fri, Nov 29, 2013 at 3:19 PM, Ronald ronald.gadget@gmail.com wrote:
I have a wandboard quad, and would like to mount a sata root FS at boot time. kwizart helped me to get sata support when booting by doing the following:
--- instructions from kwizart --- cat>/etc/modules-load.d/imx.conf<<EOF # Load ahci imx at boot ahci_platform ahci_imx EOF
dracut -H /boot/initramfs-$(uname -r).img $(uname -r) mkimage -A arm -O linux -T ramdisk -C none -n $(uname -r) -d /boot/initramfs-$(uname -r).img /boot/uInitrd-$(uname -r) --- end instructions ---
I indeed see that sata works at the first login prompt. However, I cannot mount the rootFS on sata, as apparently the fs mounting is done before the initialization of the AHCI (sata) subsystem. The following console output is when booting and mounting the rootFS on uSD card:
What kernel are you using? I would probably try a 3.12.x kernel from nodebug. The device tree support for the wandboard in 3.11 is rudimentary at best and the uboot doesn't yet support booting off sata so you'll still need a SD card with /boot and uboot on it.
http://alt.fedoraproject.org/pub/alt/rawhide-kernel-nodebug/
-
Niels de Vos -
Peter Robinson -
Ronald