Hi folks!
It'd be great if anyone with a Raspberry Pi 3 could test out a couple of prospective builds to go into Fedora 28 Final:
https://koji.fedoraproject.org/koji/buildinfo?buildID=1074979 (kernel) https://koji.fedoraproject.org/koji/buildinfo?buildID=1072875 (bcm283x-firmware)
like, soon - within the next couple of hours would be great. Both builds are intended to improve things on the Pi 3, but they're very new and I'd like at least a few folks to boot with them and confirm that things at the very least aren't any *worse* than before, before we can pull them into the release.
If you could post feedback for the bcm283x-firmware build to the update: https://bodhi.fedoraproject.org/updates/FEDORA-2018-142a31fda3
and feedback for the kernel build to this bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1570983
that'd be awesome. Thanks a lot, folks!
On Tue, Apr 24, 2018 at 8:23 PM, Adam Williamson adamwill@fedoraproject.org wrote:
Hi folks!
It'd be great if anyone with a Raspberry Pi 3 could test out a couple of prospective builds to go into Fedora 28 Final:
https://koji.fedoraproject.org/koji/buildinfo?buildID=1074979 (kernel) https://koji.fedoraproject.org/koji/buildinfo?buildID=1072875 (bcm283x-firmware)
like, soon - within the next couple of hours would be great. Both builds are intended to improve things on the Pi 3, but they're very new
Primarily on the 3+
and I'd like at least a few folks to boot with them and confirm that things at the very least aren't any *worse* than before, before we can pull them into the release.
If you could post feedback for the bcm283x-firmware build to the update: https://bodhi.fedoraproject.org/updates/FEDORA-2018-142a31fda3
and feedback for the kernel build to this bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1570983
that'd be awesome. Thanks a lot, folks!
Adam Williamson Fedora QA Community Monkey IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net http://www.happyassassin.net _______________________________________________ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org
On 04/24/2018 09:24 PM, Peter Robinson wrote:
On Tue, Apr 24, 2018 at 8:23 PM, Adam Williamson adamwill@fedoraproject.org wrote:
Hi folks!
It'd be great if anyone with a Raspberry Pi 3 could test out a couple of prospective builds to go into Fedora 28 Final:
https://koji.fedoraproject.org/koji/buildinfo?buildID=1074979 (kernel) https://koji.fedoraproject.org/koji/buildinfo?buildID=1072875 (bcm283x-firmware)
like, soon - within the next couple of hours would be great. Both builds are intended to improve things on the Pi 3, but they're very new
Primarily on the 3+
and I'd like at least a few folks to boot with them and confirm that things at the very least aren't any *worse* than before, before we can pull them into the release.
If you could post feedback for the bcm283x-firmware build to the update: https://bodhi.fedoraproject.org/updates/FEDORA-2018-142a31fda3
and feedback for the kernel build to this bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1570983
that'd be awesome. Thanks a lot, folks!
Adam Williamson Fedora QA Community Monkey IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net http://www.happyassassin.net _______________________________________________ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org
upgrade done on a PI3B, ongoing on 2 PI3B+
all on fresh installed aarch64 systems from 20180424 image
On 04/25/2018 02:31 PM, RENARD Pierre-Francois wrote:
On 04/24/2018 09:24 PM, Peter Robinson wrote:
On Tue, Apr 24, 2018 at 8:23 PM, Adam Williamson adamwill@fedoraproject.org wrote:
Hi folks!
It'd be great if anyone with a Raspberry Pi 3 could test out a couple of prospective builds to go into Fedora 28 Final:
https://koji.fedoraproject.org/koji/buildinfo?buildID=1074979 (kernel) https://koji.fedoraproject.org/koji/buildinfo?buildID=1072875 (bcm283x-firmware)
like, soon - within the next couple of hours would be great. Both builds are intended to improve things on the Pi 3, but they're very new
Primarily on the 3+
and I'd like at least a few folks to boot with them and confirm that things at the very least aren't any *worse* than before, before we can pull them into the release.
If you could post feedback for the bcm283x-firmware build to the update: https://bodhi.fedoraproject.org/updates/FEDORA-2018-142a31fda3
and feedback for the kernel build to this bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1570983
that'd be awesome. Thanks a lot, folks!
Adam Williamson Fedora QA Community Monkey IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net http://www.happyassassin.net _______________________________________________ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org
upgrade done on a PI3B, ongoing on 2 PI3B+
all on fresh installed aarch64 systems from 20180424 image
So far so good :)
fresh install + dnf upgrade + dnf install of few packages
do you have anything to test ?
Fox
On Wed, Apr 25, 2018 at 10:51 PM, RENARD Pierre-Francois pfrenard@gmail.com wrote:
On 04/25/2018 02:31 PM, RENARD Pierre-Francois wrote:
On 04/24/2018 09:24 PM, Peter Robinson wrote:
On Tue, Apr 24, 2018 at 8:23 PM, Adam Williamson adamwill@fedoraproject.org wrote:
Hi folks!
It'd be great if anyone with a Raspberry Pi 3 could test out a couple of prospective builds to go into Fedora 28 Final:
https://koji.fedoraproject.org/koji/buildinfo?buildID=1074979 (kernel) https://koji.fedoraproject.org/koji/buildinfo?buildID=1072875 (bcm283x-firmware)
like, soon - within the next couple of hours would be great. Both builds are intended to improve things on the Pi 3, but they're very new
Primarily on the 3+
and I'd like at least a few folks to boot with them and confirm that things at the very least aren't any *worse* than before, before we can pull them into the release.
If you could post feedback for the bcm283x-firmware build to the update: https://bodhi.fedoraproject.org/updates/FEDORA-2018-142a31fda3
and feedback for the kernel build to this bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1570983
that'd be awesome. Thanks a lot, folks!
Adam Williamson Fedora QA Community Monkey IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net http://www.happyassassin.net _______________________________________________ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org
upgrade done on a PI3B, ongoing on 2 PI3B+
all on fresh installed aarch64 systems from 20180424 image
So far so good :)
fresh install + dnf upgrade + dnf install of few packages
do you have anything to test ?
The kernel has now gone stable. So for that bit I believe we're now good. You might want to check out #fedora-qa IRC channel if you want up to date testing needed, it all happens pretty fast.
Peter