Please leave the Arm list on the replies.
My name is Peter.
I've emailed the sugar list to see if they're aware of the F-31 problem and asked them to resolve it if so.
Peter
Hi Paul - Thank you very much for the suggestion to move to the 31 pre-release. It is getting us much closer, but not all the way there yet. With the 31 pre-release, installed following the same directions as earlier in this thread, the system boots up, asks for an Admin name and password, user name and password, finishes configuration, then goes to the login page. Upon entering the login information, the system reboots itself. :/ So close!
Does there happen to be a stable 29 release for the Pi 3b+ ? I could not find it in numerous searches today.
Thanks again,
Garry Wakely
On Wed, Oct 16, 2019 at 5:48 PM Peter Robinson pbrobinson@gmail.com wrote:
Adding back Arm list.
On Wed, Oct 16, 2019 at 8:01 PM Garry Wakely bristolgarry@gmail.com wrote:
Hi Peter - It is the Fedora-SoaS-armhfp-30-1.2-sda version downloaded this morning from here: https://arm.fedoraproject.org/ It was installed according to the directions here: https://docs.fedoraproject.org/en-US/fedora/f30/install-guide/install/Prepar... and installed using the Fedora Media Writer.
There was a known issue with the F-30 release. I would give one of the F-31 pre-releases out as I believe they should be much better.
Hi Folks - I am trying to set up Sugar On A Stick for Raspberry Pi 3+, but am running into a boot issue. The boot process runs properly until it gets to "Reached Target Basic System", and then it hangs at "A start job is running for dev/dis...1fe03C48" at which point there is no further progress. Has anyone else had a problem like this, and if so, what is your workaround/solution?
What release?
Hi Peter - My apologies about getting your name wrong. :/
Thank you very much for your help - this project is for the Bristol Public library, so you are not just helping me, you are helping the community of Bristol TN/VA. :)
Thanks again,
Garry Wakely
On Fri, Oct 18, 2019 at 5:17 AM Peter Robinson pbrobinson@gmail.com wrote:
Please leave the Arm list on the replies.
My name is Peter.
I've emailed the sugar list to see if they're aware of the F-31 problem and asked them to resolve it if so.
Peter
Hi Paul - Thank you very much for the suggestion to move to the 31
pre-release. It is getting us much closer, but not all the way there yet.
With the 31 pre-release, installed following the same directions as
earlier in this thread, the system boots up, asks for an Admin name and password, user name and password, finishes configuration, then goes to the login page. Upon entering the login information, the system reboots itself. :/ So close!
Does there happen to be a stable 29 release for the Pi 3b+ ? I could
not find it in numerous searches today.
Thanks again,
Garry Wakely
On Wed, Oct 16, 2019 at 5:48 PM Peter Robinson pbrobinson@gmail.com
wrote:
Adding back Arm list.
On Wed, Oct 16, 2019 at 8:01 PM Garry Wakely bristolgarry@gmail.com
wrote:
Hi Peter - It is the Fedora-SoaS-armhfp-30-1.2-sda version downloaded
this morning from here: https://arm.fedoraproject.org/
It was installed according to the directions here:
https://docs.fedoraproject.org/en-US/fedora/f30/install-guide/install/Prepar...
and installed using the Fedora Media Writer.
There was a known issue with the F-30 release. I would give one of the F-31 pre-releases out as I believe they should be much better.
Hi Folks - I am trying to set up Sugar On A Stick for Raspberry Pi
3+, but am running into a boot issue. The boot process runs properly until it gets to "Reached Target Basic System", and then it hangs at
"A start job is running for dev/dis...1fe03C48" at which point
there is no further progress. Has anyone else had a problem like this, and if so, what is your workaround/solution?
What release?
On Fri, Oct 18, 2019 at 01:04:11PM -0400, Garry Wakely wrote:
Hi Peter - My apologies about getting your name wrong. :/
Thank you very much for your help - this project is for the Bristol Public library, so you are not just helping me, you are helping the community of Bristol TN/VA. :)
That's cool! Once you have everything up and running, would you be interested in writing an article about it for Fedora Magazine (https://fedoramagazine.org/)? Or, if you like we can pitch the idea to one of our volunteer writers and it could be done as an interview.
Hi Garry,
On Fri, Oct 18, 2019 at 6:04 PM Garry Wakely bristolgarry@gmail.com wrote:
Hi Peter - My apologies about getting your name wrong. :/
Thank you very much for your help - this project is for the Bristol Public library, so you are not just helping me, you are helping the community of Bristol TN/VA. :)
I believe this was fixed for the final F-31 release, did you get a chance to try that out?
Peter
Thanks again,
Garry Wakely
On Fri, Oct 18, 2019 at 5:17 AM Peter Robinson pbrobinson@gmail.com wrote:
Please leave the Arm list on the replies.
My name is Peter.
I've emailed the sugar list to see if they're aware of the F-31 problem and asked them to resolve it if so.
Peter
Hi Paul - Thank you very much for the suggestion to move to the 31 pre-release. It is getting us much closer, but not all the way there yet. With the 31 pre-release, installed following the same directions as earlier in this thread, the system boots up, asks for an Admin name and password, user name and password, finishes configuration, then goes to the login page. Upon entering the login information, the system reboots itself. :/ So close!
Does there happen to be a stable 29 release for the Pi 3b+ ? I could not find it in numerous searches today.
Thanks again,
Garry Wakely
On Wed, Oct 16, 2019 at 5:48 PM Peter Robinson pbrobinson@gmail.com wrote:
Adding back Arm list.
On Wed, Oct 16, 2019 at 8:01 PM Garry Wakely bristolgarry@gmail.com wrote:
Hi Peter - It is the Fedora-SoaS-armhfp-30-1.2-sda version downloaded this morning from here: https://arm.fedoraproject.org/ It was installed according to the directions here: https://docs.fedoraproject.org/en-US/fedora/f30/install-guide/install/Prepar... and installed using the Fedora Media Writer.
There was a known issue with the F-30 release. I would give one of the F-31 pre-releases out as I believe they should be much better.
> Hi Folks - I am trying to set up Sugar On A Stick for Raspberry Pi 3+, but am running into a boot issue. The boot process runs properly until it gets to "Reached Target Basic System", and then it hangs at > "A start job is running for dev/dis...1fe03C48" at which point there is no further progress. Has anyone else had a problem like this, and if so, what is your workaround/solution?
What release?
-
Garry Wakely -
Matthew Miller -
Peter Robinson