Hi,

On 08/30/2013 07:24 PM, elias.vds@gmail.com wrote:

Op vrijdag 19 juli 2013 00:12:35 UTC+2 schreef Hans de Goede:

...

The following has been ported / is supported:

-sound: analog in/out Fedora 19 ARM should also work on the following devices:

• A13-OLinuXino (Olimex)

Hi, thanks very much for the release!

I've already tested the Fedora 18 remix on my A13-OLinuXino (even with WIFI working!), but I can't get the audio to work: ALSA reports that no soundcards could be detected.

However using the Debian image of Olimex, I was able to get audio through my headphones and the mic worked also. I looked up the driver, and it appeared to be "sun5i-CODEC". On the rootfs of the Fedora image, I looked into "/lib/modules/<sun5i-kernel>/kernel/sound/soc/", but I only could see a "sun4i" directory, even without a "sun4i-CODEC" counterpart. I read somewhere else that code of "/sound/soc/sun5i" was merged with "/sound/soc/sun4i", but I tried to modprobe each driver in "/sound/soc/sun4i" without success.

Do I have to recompile the whole kernel, or just compile the "sun5i-CODEC" module, or do I have to do something different to get audio working? Thank you very much!

You're not seeing the sun4i-codec module (which works for sun5i too) because it is build into the kernel.

You should see some audio devices under /dev/snd and /sys/class/sound

While checking things work with Fedora 19 ARM remix for Allwinner SOCs release 1 I did notice that there is an error in the fex file for the A13-OLinuXino, causing only audio-out to be present, I've just pushed an updated fex file here: https://github.com/linux-sunxi/sunxi-boards/blob/master/sys_config/a13/a13-o...

If you save this file, convert it to a script.bin file using the fex2bin utility from here: https://github.com/linux-sunxi/sunxi-tools

And then overwrite script.bin in the uboot partition of your sdcard with the new one you should also get a capture device.

Regards,

Hans