Hi,
I've finally had some time today to toy with my RPI 3b+. I wanted to install fedora-server on it and followed the instructions at https://fedoraproject.org/wiki/Architectures/ARM/Raspberry_Pi#Supported_Hard... (using the aarch64 images). I get the rainbow screen. To rule out the SD card and the power supply I've just installed Rasbpian and it worked. How can I gather and provide useful information for the project or me to understand why it's not working out of the box. Shall I try to use beta 28 from https://dl.fedoraproject.org/pub/fedora/linux/releases/test/28_Beta/Server/a... Or Should I just run rawhide (which was my plan once I had and idea how things work in a stable env).
Ludo
On Mon, Apr 30, 2018 at 12:24 PM, Ludovic Hirlimann - wargame debellum@free.fr wrote:
Just tried rawhide and I get the same issue
It's actually a different problem, same result, will be fixed in today's compose.
BTW what is the rating of your PSU?
Envoyé: Lundi 30 Avril 2018 13:44:54 Objet: Re: [fedora-arm] Re: RPI 3b+ Support ?
On Mon, Apr 30, 2018 at 12:24 PM, Ludovic Hirlimann - wargame debellum@free.fr wrote:
Just tried rawhide and I get the same issue
It's actually a different problem, same result, will be fixed in today's compose.
I can wait a day or two to try again.
BTW what is the rating of your PSU?
Haven't measure it myself. It comes from the complete RPI3b+ box from melorepo. The PSU is from element14 and the box says 2.5A, 5.1V.
Ludo
On Mon, Apr 30, 2018 at 12:55 PM, Ludovic Hirlimann - wargame debellum@free.fr wrote:
Envoyé: Lundi 30 Avril 2018 13:44:54 Objet: Re: [fedora-arm] Re: RPI 3b+ Support ?
On Mon, Apr 30, 2018 at 12:24 PM, Ludovic Hirlimann - wargame debellum@free.fr wrote:
Just tried rawhide and I get the same issue
It's actually a different problem, same result, will be fixed in today's compose.
I can wait a day or two to try again.
The image I referenced in the prior response is the F-28 GA, we've not focused on rawhide status in an effort to get F-28 stable and released so I would start with that.
BTW what is the rating of your PSU?
Haven't measure it myself. It comes from the complete RPI3b+ box from melorepo. The PSU is from element14 and the box says 2.5A, 5.1V.
Ludo
The image I referenced in the prior response is the F-28 GA, we've not focused on rawhide status in an effort to get F-28 stable and released so I would start with that.
Ok This shows some text at boot time (I took the server edition not the snips) Card did not response to voltgae Select!
lan78xx_eth Waits for negotaion to be complete (I didn't plug the eth) When it complete I get a selection menu with one item and then goes completely black with no more green light blinking.
When booting with a newtork cable, I end up in the same situation.
Ludo
On Mon, Apr 30, 2018 at 1:39 PM, Ludovic Hirlimann - wargame debellum@free.fr wrote:
The image I referenced in the prior response is the F-28 GA, we've not focused on rawhide status in an effort to get F-28 stable and released so I would start with that.
Ok This shows some text at boot time (I took the server edition not the snips) Card did not response to voltgae Select!
lan78xx_eth Waits for negotaion to be complete (I didn't plug the eth) When it complete I get a selection menu with one item and then goes completely black with no more green light blinking.
By selection menu you mean grub? How are you connected? Via HDMI? If so do you get the penguins?
On Mon, Apr 30, 2018 at 11:22 AM, Ludovic Hirlimann - wargame debellum@free.fr wrote:
Hi,
I've finally had some time today to toy with my RPI 3b+. I wanted to install fedora-server on it and followed the instructions at https://fedoraproject.org/wiki/Architectures/ARM/Raspberry_Pi#Supported_Hard... (using the aarch64 images). I get the rainbow screen. To rule out the SD card and the power supply I've just installed Rasbpian and it worked. How can I gather and provide useful information for the project or me to understand why it's not working out of the box. Shall I try to use beta 28 from https://dl.fedoraproject.org/pub/fedora/linux/releases/test/28_Beta/Server/a... Or Should I just run rawhide (which was my plan once I had and idea how things work in a stable env).
Try the GA RC: https://dl.fedoraproject.org/pub/alt/stage/28_RC-1.1/Spins/aarch64/images/
Details: https://nullr0ute.com/2018/04/the-raspberry-pi-3-b-in-fedora/
-
Ludovic Hirlimann - wargame -
Peter Robinson